Update to drashna userspace and keymaps (#4459)

* Fix reversed bool check in layer_state_set

* Add Quefrency 65 for a friend

* Add Ergodox EZ Glow keymap

* Add RGB Matrix Code

* Further changes to rgb matrix ErgoDox EZ

* Update bjohnson keymaps

* Fix CRKBD display

* Overhaul to corne keyboard

* Narrow scope for keylogger

* Minor layout tweaks to Corne Keyboard

* additional CRKBD tweaks

* Minor tweaks to CRKBD

* Add all characters for keylogger

* Ergodox EZ Glow overhaul

* Fix Ergodox EZ Glow layer colors

* Increase Tapping Term for Corne Keyboard

* Fix unicode-ish

* Revert some changes

* Add layer specific lighting effects

* Some minor tweaks to ergodox glow config

* revert changes to ergodox files

* Update Glow readme

* Add more tapping term defines

* Fix changes

* Fix ergodox keymap

* Hopefully fix sleeping

* Disable layer indications if rgb matrix is disabled

* Add support for sleeping and rgb layer change toggle to ergodox ez glow

* Make RGB Layer Indication Great Again

* Make Unicode Great Again

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove old EEPROM Reset keycode

10 files changed, 221 insertions, 53 deletions

diff --git a/keyboards/crkbd/keymaps/drashna/config.h b/keyboards/crkbd/keymaps/drashna/config.h
index adfd79044..cbc3feeb6 100644
--- a/keyboards/crkbd/keymaps/drashna/config.h
+++ b/keyboards/crkbd/keymaps/drashna/config.h
@@ -41,5 +41,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_LIMIT_VAL 100
+#endif
+
+#ifdef AUDIO_ENABLE
+#define B6_AUDIO
+// #define NO_MUSIC_MODE
 #endif
diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c
index 99dcdb4e1..282ee2572 100644
--- a/keyboards/crkbd/keymaps/drashna/keymap.c
+++ b/keyboards/crkbd/keymaps/drashna/keymap.c
@@ -26,10 +26,10 @@ enum crkbd_keycodes {
     K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
   ) \
   LAYOUT_wrapper( \
-    KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
-    KC_TAB,  K11,    K12,     K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A,     KC_QUOT, \
+    KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
+    KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RGUI_T(KC_QUOT), \
     OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), OS_RSFT, \
-                           LT(_LOWER,KC_GRV), KC_SPC,  LALT_T(KC_BSPC),  KC_DEL,  KC_ENT,  RAISE                                    \
+                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,     KC_DEL,  KC_ENT,  RAISE                                        \
   )
 #define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
 
@@ -66,14 +66,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_LOWER] = LAYOUT_wrapper(
-    KC_TILD, _________________LOWER_L1__________________,                    _________________LOWER_R1__________________, KC_BSPC,
-    KC_F11,  _________________LOWER_L2__________________,                    _________________LOWER_R2__________________, KC_PIPE,
-    KC_F12,  _________________LOWER_L3__________________,                    _________________LOWER_R3__________________, _______,
+    KC_F11,  _________________LOWER_L1__________________,                    _________________LOWER_R1__________________, KC_F11,
+    KC_F12,  _________________LOWER_L2__________________,                    _________________LOWER_R2__________________, KC_PIPE,
+    _______, _________________LOWER_L3__________________,                    _________________LOWER_R3__________________, _______,
                                      _______, _______, _______,        _______, _______, _______
   ),
 
   [_RAISE] = LAYOUT_wrapper( \
-    KC_GRV,  _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, KC_BSPC,
+    _______, _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, _______,
     _______, _________________RAISE_L2__________________,                    _________________RAISE_R2__________________, KC_BSLS,
     _______, _________________RAISE_L3__________________,                    _________________RAISE_R3__________________, _______,
                                      _______, _______, _______,        _______, _______, _______
@@ -81,18 +81,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_ADJUST] = LAYOUT_wrapper( \
     KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
-    VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EPRM,
-    TG_MODS, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, KC_MPLY,
-                                     _______, _______, _______,        _______, _______, _______
+    VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EEP_RST,
+    _______, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, KC_MPLY,
+                                     _______, _______, _______,        KC_NUKE, TG_MODS, _______
   )
 };
 
-int RGB_current_mode;
-
 void matrix_init_keymap(void) {
-    #ifdef RGBLIGHT_ENABLE
-      RGB_current_mode = rgblight_config.mode;
-    #endif
     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
     #ifdef SSD1306OLED
         iota_gfx_init(!has_usb());   // turns on the display
@@ -102,53 +97,118 @@ void matrix_init_keymap(void) {
   PORTD &= ~(1<<5);
 
   DDRB &= ~(1<<0);
-  PORTB &= ~(1<<0);}
+  PORTB &= ~(1<<0);
+}
 
 //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
 #ifdef SSD1306OLED
 
 // When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
 const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
 char layer_state_str[24];
+char modifier_state_str[24];
+char host_led_state_str[24];
+char keylog_str[24] = {};
+char keylogs_str[21] = {};
+int keylogs_str_idx = 0;
+
 // const char *read_mode_icon(bool swap);
-const char *read_host_led_state(void);
 // void set_timelog(void);
 // const char *read_timelog(void);
 
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
+    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+
+void set_keylog(uint16_t keycode, keyrecord_t *record) {
+  char name = ' ';
+  if (keycode < 60) {
+    name = code_to_name[keycode];
+  }
+
+  // update keylog
+  snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
+           record->event.key.row, record->event.key.col,
+           keycode, name);
+
+  // update keylogs
+  if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
+    keylogs_str_idx = 0;
+    for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
+      keylogs_str[i] = ' ';
+    }
+  }
+
+  keylogs_str[keylogs_str_idx] = name;
+  keylogs_str_idx++;
+}
+
+const char *read_keylog(void) {
+  return keylog_str;
+}
+
+const char *read_keylogs(void) {
+  return keylogs_str;
+}
+
+
+const char* read_modifier_state(void) {
+  uint8_t modifiers = get_mods();
+  uint8_t one_shot = get_oneshot_mods();
+
+  snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
+    (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL" : "   ",
+    (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI" : "   ",
+    (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT" : "   ",
+    (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : "   "
+  );
+
+  return modifier_state_str;
+}
+
+const char *read_host_led_state(void) {
+  uint8_t leds = host_keyboard_leds();
+
+  snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
+    (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
+    (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
+    (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
+  );
+
+  return host_led_state_str;
+}
 
 const char* read_layer_state(void) {
-  switch (layer_state) {
-    case _QWERTY:
-      switch (default_layer_state) {
+  switch (biton32(layer_state)) {
+    case _RAISE:
+      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise  ");
+      break;
+    case _LOWER:
+      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower  ");
+      break;
+    case _ADJUST:
+      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
+      break;
+    default:
+      switch (biton32(default_layer_state)) {
         case _QWERTY:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: QWERTY");
+          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
           break;
         case _COLEMAK:
           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
           break;
         case _DVORAK:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak");
+          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak ");
           break;
         case _WORKMAN:
           snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
           break;
       }
       break;
-    case _RAISE:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
-      break;
-    case _LOWER:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
-      break;
-    case _ADJUST:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
-      break;
-    default:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
   }
 
     return layer_state_str;
@@ -160,12 +220,13 @@ void matrix_scan_keymap(void) {
 
 void matrix_render_user(struct CharacterMatrix *matrix) {
   if (is_master) {
-    // If you want to change the display of OLED, you need to change here
+    //If you want to change the display of OLED, you need to change here
     matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_modifier_state());
+    // matrix_write_ln(matrix, read_keylog());
     matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    matrix_write_ln(matrix, read_host_led_state());
+    // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    matrix_write(matrix, read_host_led_state());
     //matrix_write_ln(matrix, read_timelog());
   } else {
     matrix_write(matrix, read_logo());
@@ -187,8 +248,14 @@ void iota_gfx_task_user(void) {
 }
 
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    set_keylog(keycode, record);
+  switch (keycode) {
+    case KC_A ... KC_SLASH:
+    case KC_F1 ... KC_F12:
+    case KC_INSERT ... KC_UP:
+    case KC_KP_SLASH ... KC_KP_DOT:
+    case KC_F13 ... KC_F24:
+    if (record->event.pressed) { set_keylog(keycode, record); }
+      break;
     // set_timelog();
   }
   return true;
diff --git a/keyboards/crkbd/keymaps/drashna/rules.mk b/keyboards/crkbd/keymaps/drashna/rules.mk
index ccf8e2b7c..4b70f66f7 100644
--- a/keyboards/crkbd/keymaps/drashna/rules.mk
+++ b/keyboards/crkbd/keymaps/drashna/rules.mk
@@ -20,12 +20,14 @@ SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
+BOOTLOADER = qmk-dfu
+
 # If you want to change the display of OLED, you need to change here
 SRC +=  ./lib/glcdfont.c \
         ./lib/rgb_state_reader.c \
         ./lib/logo_reader.c \
-        ./lib/keylogger.c \
-        ./lib/host_led_state_reader.c \
-        # ./lib/layer_state_reader.c \
+        # ./lib/keylogger.c \
+        # ./lib/host_led_state_reader.c \
         # ./lib/mode_icon_reader.c \
+        # ./lib/layer_state_reader.c \
         # ./lib/timelogger.c \
diff --git a/keyboards/iris/keymaps/drashna/keymap.c b/keyboards/iris/keymaps/drashna/keymap.c
index 21e3151c0..ba6f18edd 100644
--- a/keyboards/iris/keymaps/drashna/keymap.c
+++ b/keyboards/iris/keymaps/drashna/keymap.c
@@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_ADJUST] = LAYOUT_wrapper(
       KC_MAKE, _______, _______, _______, _______, _______,                      _________________ADJUST_R1_________________, KC_RST,
-      VRSN,    _________________ADJUST_L1_________________,                      KC_NUKE, _______, _______, _______, _______, EPRM,
+      VRSN,    _________________ADJUST_L1_________________,                      KC_NUKE, _______, _______, _______, _______, EEP_RST,
       _______, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
       _______, _________________ADJUST_L3_________________, TG_GAME,    _______, _________________ADJUST_R3_________________, KC_MPLY,
                                         _______, _______, _______,        _______, _______, _______
diff --git a/keyboards/iris/keymaps/drashna/rules.mk b/keyboards/iris/keymaps/drashna/rules.mk
index 89e568f39..ccc33c06f 100644
--- a/keyboards/iris/keymaps/drashna/rules.mk
+++ b/keyboards/iris/keymaps/drashna/rules.mk
@@ -8,7 +8,7 @@ RGBLIGHT_ENABLE   = yes
 AUDIO_ENABLE      = yes
 NKRO_ENABLE       = yes
 BACKLIGHT_ENABLE  = no
-SWAP_HANDS_ENABLE = yes
+SWAP_HANDS_ENABLE = no
 
 INDICATOR_LIGHTS  = yes
 MACROS_ENABLED    = no
diff --git a/keyboards/orthodox/keymaps/drashna/keymap.c b/keyboards/orthodox/keymaps/drashna/keymap.c
index 545ad25dc..346ca4f12 100644
--- a/keyboards/orthodox/keymaps/drashna/keymap.c
+++ b/keyboards/orthodox/keymaps/drashna/keymap.c
@@ -91,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_ADJUST] = LAYOUT_wrapper(\
   KC_MAKE, _________________ADJUST_L1_________________,                                                               _________________ADJUST_R1_________________, KC_RESET,
-  VRSN,    _________________ADJUST_L2_________________,          _______, _______,         _______, KC_NUKE,          _________________ADJUST_R2_________________, EPRM,
+  VRSN,    _________________ADJUST_L2_________________,          _______, _______,         _______, KC_NUKE,          _________________ADJUST_R2_________________, EEP_RST,
   TG_MODS, _________________ADJUST_L3_________________, _______, _______, _______,         _______, _______, _______, _________________ADJUST_R3_________________, KC_MPLY
 )
 };
diff --git a/keyboards/quefrency/keymaps/bjohnson/config.h b/keyboards/quefrency/keymaps/bjohnson/config.h
new file mode 100644
index 000000000..37c6d6672
--- /dev/null
+++ b/keyboards/quefrency/keymaps/bjohnson/config.h
@@ -0,0 +1,41 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2018 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+#define TAPPING_TERM 500
+
+#define IGNORE_MOD_TAP_INTERRUPT
+#define PERMISSIVE_HOLD
+#define FORCE_NKRO
+#define RETRO_TAPPING
+
+#define TAPPING_TOGGLE 1
+
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#define RGBLIGHT_SLEEP
diff --git a/keyboards/quefrency/keymaps/bjohnson/keymap.c b/keyboards/quefrency/keymaps/bjohnson/keymap.c
new file mode 100644
index 000000000..434a0a305
--- /dev/null
+++ b/keyboards/quefrency/keymaps/bjohnson/keymap.c
@@ -0,0 +1,33 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_65(
+    KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_HOME, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_DEL, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_INS, \
+    KC_LCTL, KC_LGUI, KC_LALT, LT(_FN1,KC_SPC),KC_SPC,    KC_SPC,  XXXXXXX,  KC_RALT, KC_RGUI, XXXXXXX, KC_APP,  KC_RCTL, TT(_FN1)
+  ),
+
+  [_FN1] = LAYOUT_65(
+    KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  XXXXXXX, KC_BSPC, KC_PGUP, \
+    _______, _______,  KC_UP,  _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, _______, _______, KC_PGDN, \
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   _______, _______, _______, _______, \
+    _______, RGB_MOD, RGB_HUI, RGB_HUD, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______,          KC_P0,   XXXXXXX, _______, _______, XXXXXXX, _______, _______, _______
+  )
+};
diff --git a/keyboards/quefrency/keymaps/bjohnson/rules.mk b/keyboards/quefrency/keymaps/bjohnson/rules.mk
new file mode 100644
index 000000000..70fa71100
--- /dev/null
+++ b/keyboards/quefrency/keymaps/bjohnson/rules.mk
@@ -0,0 +1,22 @@
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/viterbi/keymaps/drashna/keymap.c b/keyboards/viterbi/keymaps/drashna/keymap.c
index acda8a0d2..a34320519 100644
--- a/keyboards/viterbi/keymaps/drashna/keymap.c
+++ b/keyboards/viterbi/keymaps/drashna/keymap.c
@@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_MEDIA] = LAYOUT_ortho_5x7(
       KC_MAKE, KC_RESET,MU_TOG,  AU_ON,   AU_OFF,  CK_TOGG, RGB_SAD,
-      MEDIA,   EPRM,    KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
+      MEDIA,   EEP_RST,    KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
       RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_HUD,
       KC_MPLY, KC_MPRV, KC_MNXT, RGB_M_X, RGB_M_G, RGB_M_P, RGB_HUI,
       KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI
@@ -94,5 +94,3 @@ void matrix_init_keymap(void) {
   DDRB &= ~(1<<0);
   PORTB &= ~(1<<0);
 }
-
-