diff options
| author | James Young <18669334+noroadsleft@users.noreply.github.com> | 2020-05-30 13:14:59 -0700 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-05-30 13:14:59 -0700 |
| commit | fced377ac007d27f2650ccffbe0b18abcdcfe23d (patch) | |
| tree | bd5b141987394a5a16cfc416bfe2b9efdb14d067 /keyboards/zinc | |
| parent | 7b8a013826ad90714a05ea522de53adf964ab3b9 (diff) | |
| download | firmware-fced377ac007d27f2650ccffbe0b18abcdcfe23d.tar.gz firmware-fced377ac007d27f2650ccffbe0b18abcdcfe23d.tar.bz2 firmware-fced377ac007d27f2650ccffbe0b18abcdcfe23d.zip | |
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
Diffstat (limited to 'keyboards/zinc')
43 files changed, 443 insertions, 2263 deletions
diff --git a/keyboards/zinc/config.h b/keyboards/zinc/config.h index 712db0ac6..cfb6bf4ff 100644 --- a/keyboards/zinc/config.h +++ b/keyboards/zinc/config.h @@ -17,30 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -//#ifndef CONFIG_H -//#define CONFIG_H #include "config_common.h" - -// GCC include 'config.h" sequence in qmk_firmware/keyboards/zinc/ -// -include keyboards/zinc/config.h -// -include keyboards/zinc/rev?/config.h -// -include keyboards/zinc/rev?/keymaps/MAPNAME/config.h -// XXXX.c - -#include <serial_config.h> - -// GCC include search path in qmk_firmare/keyboards/zinc/ -// #include "..." search starts here: -// #include <...> search starts here: -// keyboards/zinc/rev?/keymaps/MAPNAME -// keyboards/zinc -// keyboards/zinc/rev? -// . -// ./tmk_core -// ...... - -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - -//#endif /* CONFIG_H */ diff --git a/keyboards/zinc/i2c.c b/keyboards/zinc/i2c.c deleted file mode 100644 index 4bee5c639..000000000 --- a/keyboards/zinc/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/zinc/i2c.h b/keyboards/zinc/i2c.h deleted file mode 100644 index 47cf6bd1b..000000000 --- a/keyboards/zinc/i2c.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef I2C_H -#define I2C_H - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/zinc/keymaps/default/config.h b/keyboards/zinc/keymaps/default/config.h index 4dcb0724f..2185dc9eb 100644 --- a/keyboards/zinc/keymaps/default/config.h +++ b/keyboards/zinc/keymaps/default/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -// if you need more program area, try uncomment follow line -#include "serial_config_simpleapi.h" // place overrides here // Selection of RGBLIGHT MODE to use. diff --git a/keyboards/zinc/keymaps/default/keymap.c b/keyboards/zinc/keymaps/default/keymap.c index 0f08d21ee..cd1bf0328 100644 --- a/keyboards/zinc/keymaps/default/keymap.c +++ b/keyboards/zinc/keymaps/default/keymap.c @@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \ * |------+------+------+------+------+------| |------+------+------+------+------+------| * | |RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | MODE | HUE- | SAT- | VAL- | | | | | | | | | + * |MODE R| MODE | HUE- | SAT- | VAL- | | | | | | |PageUp| | * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | | | EISU | EISU | EISU | | KANA | KANA | Home |PageDn|PageUp| End | * `-----------------------------------------' `-----------------------------------------' @@ -147,13 +147,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \ [_ADJUST] = LAYOUT_ortho_4x12( \ _______, RESET, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, KC_INS, \ _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, AG_NORM, AG_SWAP, KC_MINS, KC_EQL, KC_PSCR, KC_SLCK, KC_PAUS,\ - _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,\ - _______, _______, _______, EISU, EISU, EISU, KANA, KANA, KC_HOME, KC_PGDN, KC_PGUP, KC_END\ + RGB_RMOD,RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, KC_PGUP, _______,\ + _______, _______, _______, EISU, EISU, EISU, KANA, KANA, KANA, KC_HOME, KC_PGDN, KC_END\ ) }; // define variables for reactive RGB -bool TOG_STATUS = false; +bool TOG_STATUS = false; // Setting ADJUST layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { @@ -211,7 +211,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; - + case RAISE: if (record->event.pressed) { //not sure how to have keyboard check mode and set it to a variable, so my work around @@ -244,16 +244,28 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_RMOD: + #if defined(RGBLIGHT_ENABLE) + if (record->event.pressed) { + rgblight_mode_noeeprom(RGB_current_config.mode); + rgblight_step_reverse(); + RGB_current_config.mode = rgblight_config.mode; + } + return false; + #endif + break; + case RGB_MOD: - #ifdef RGBLIGHT_ENABLE + #if defined(RGBLIGHT_ENABLE) if (record->event.pressed) { rgblight_mode_noeeprom(RGB_current_config.mode); rgblight_step(); RGB_current_config.mode = rgblight_config.mode; } - #endif return false; + #endif break; case EISU: diff --git a/keyboards/zinc/keymaps/default/readme_en.md b/keyboards/zinc/keymaps/default/readme_en.md new file mode 100644 index 000000000..6447e96ed --- /dev/null +++ b/keyboards/zinc/keymaps/default/readme_en.md @@ -0,0 +1,131 @@ +# The Default Zinc Layout +## layout + +### Qwerty + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc | Fn | Alt | Win |Lower |Space | | Space| Raise| Left | Down | Up | Right| + `------------------------------------------ ------------------------------------------' +``` + +### Colemak + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + `------------------------------------------ ------------------------------------------' +``` + +### Dvorak + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | ' | , | . | P | Y | | F | G | C | R | L | Del | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | O | E | U | I | | D | H | T | N | S | / | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + `-----------------------------------------' `-----------------------------------------' +``` + +### Lower +``` + ,-----------------------------------------. ,-----------------------------------------. + | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | - | _ | + | { | } | | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | | Home | End | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | Next | Vol- | Vol+ | Play | + `-----------------------------------------' `-----------------------------------------' +``` + +### RAISE +``` + ,-----------------------------------------. ,-----------------------------------------. + | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | Next | Vol- | Vol+ | Play | + `-----------------------------------------' `-----------------------------------------' +``` + +### Adjust (Lower + Raise) +``` + ,-----------------------------------------. ,-----------------------------------------. + | | Reset|RGBRST|Aud on|Audoff| | | |Qwerty|Colemk|Dvorak| | Ins | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | |RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause | + |------+------+------+------+------+------| |------+------+------+------+------+------| + |MODE R|RGBMOD| HUE- | SAT- | VAL- | | | | | | |PageUp| | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | EISU | EISU | EISU | | KANA | KANA | KANA | Home |PageDn| End | + `-----------------------------------------' `-----------------------------------------' +``` + +## Compile + +go to qmk top directory. + +``` +$ cd qmk_firmware +``` +make with `zinc:<keymap_name>` + +``` +$ make zinc:default +``` + +To make and flash with `:flash` + +``` +$ make zinc:default:flash +``` + + +## Customize + +You can customize from the command line. + +``` +# Zinc keyboard 'default' keymap: convenient command line option +make ZINC=<options> zinc:defualt +# option= back | under | both | cont | na | ios +# ex. +# make ZINC=under zinc:defualt +# make ZINC=under,ios zinc:defualt +# make ZINC=back zinc:default +# make ZINC=back,na zinc:default +# make ZINC=back,ios zinc:default +``` + +Or edit `qmk_firmware/keyboards/zinc/rev1/keymaps/~/rules.mk` directly. + +``` +# Zinc keyboard customize +LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +``` diff --git a/keyboards/zinc/keymaps/default/readme_jp.md b/keyboards/zinc/keymaps/default/readme_jp.md index dfedb37c1..8132f5036 100644 --- a/keyboards/zinc/keymaps/default/readme_jp.md +++ b/keyboards/zinc/keymaps/default/readme_jp.md @@ -43,6 +43,44 @@ `-----------------------------------------' `-----------------------------------------' ``` + ### Lower +``` + ,-----------------------------------------. ,-----------------------------------------. + | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | - | _ | + | { | } | | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | | Home | End | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | Next | Vol- | Vol+ | Play | + `-----------------------------------------' `-----------------------------------------' +``` + +### RAISE +``` + ,-----------------------------------------. ,-----------------------------------------. + | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | | | | | | | Next | Vol- | Vol+ | Play | + `-----------------------------------------' `-----------------------------------------' +``` + +### Adjust (Lower + Raise) +``` + ,-----------------------------------------. ,-----------------------------------------. + | | Reset|RGBRST|Aud on|Audoff| | | |Qwerty|Colemk|Dvorak| | Ins | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | |RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause | + |------+------+------+------+------+------| |------+------+------+------+------+------| + |MODE R|RGBMOD| HUE- | SAT- | VAL- | | | | | | |PageUp| | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | | | | EISU | EISU | EISU | | KANA | KANA | KANA | Home |PageDn| End | + `-----------------------------------------' `-----------------------------------------' +``` ## コンパイルの仕方 @@ -76,7 +114,7 @@ $ make zinc:default:clean ``` # Zinc keyboard 'default' keymap: convenient command line option make ZINC=<options> zinc:defualt -# option= back | under | na | ios +# option= back | under | both | cont | na | ios # ex. # make ZINC=under zinc:defualt # make ZINC=under,ios zinc:defualt @@ -85,16 +123,16 @@ make ZINC=<options> zinc:defualt # make ZINC=back,ios zinc:default ``` -あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/default/rules.mk` の以下の部分を直接編集して機能を有効化してください。 +あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/~/rules.mk` の以下の部分を直接編集して機能を有効化してください。 ``` # Zinc keyboard customize LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) - - ``` ## RGB backlight を有効にする @@ -120,4 +158,4 @@ RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone に ``` IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -```
\ No newline at end of file +``` diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk index c980f7d00..32e0f2161 100644 --- a/keyboards/zinc/keymaps/default/rules.mk +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -20,6 +20,9 @@ define ZINC_CUSTOMISE_MSG $(info Zinc customize) $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE)) + $(info - LED_RGB_CONT=$(LED_RGB_CONT)) + $(info - RGB_MATRIX=$(RGB_MATRIX)) $(info - LED_ANIMATION=$(LED_ANIMATIONS)) $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) endef @@ -27,6 +30,10 @@ endef # Zinc keyboard customize LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc +RGB_MATRIX = no # RGB LED Matrix +RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) Link_Time_Optimization = no # if firmware size over limit, try this option @@ -36,7 +43,7 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ### Zinc keyboard 'default' keymap: convenient command line option ## make ZINC=<options> zinc:defualt -## option= back | under | na | ios +## option= back | under | both | cont | matrix | na | ios ## ex. ## make ZINC=under zinc:defualt ## make ZINC=under,ios zinc:defualt @@ -47,9 +54,22 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ifneq ($(strip $(ZINC)),) ifeq ($(findstring back,$(ZINC)), back) LED_BACK_ENABLE = yes - else ifeq ($(findstring under,$(ZINC)), under) + endif + ifeq ($(findstring under,$(ZINC)), under) LED_UNDERGLOW_ENABLE = yes endif + ifeq ($(findstring both,$(ZINC)), both) + LED_BOTH_ENABLE = yes + endif + ifeq ($(findstring cont,$(ZINC)), cont) + LED_RGB_CONT = yes + endif + ifeq ($(findstring matrix,$(ZINC)), matrix) + RGB_MATRIX = yes + endif + ifeq ($(findstring right,$(ZINC)), right) + RGB_MATRIX_SPLIT_RIGHT = yes + endif ifeq ($(findstring na,$(ZINC)), na) LED_ANIMATIONS = no endif @@ -62,10 +82,11 @@ endif ifeq ($(strip $(LED_BACK_ENABLE)), yes) RGBLIGHT_ENABLE = yes - OPT_DEFS += -DRGBLED_BACK ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) - $(eval $(call ZINC_CUSTOMISE_MSG)) - $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + OPT_DEFS += -DRGBLED_BOTH + $(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE) + else + OPT_DEFS += -DRGBLED_BACK endif else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) RGBLIGHT_ENABLE = yes @@ -73,18 +94,36 @@ else RGBLIGHT_ENABLE = no endif +ifeq ($(strip $(LED_BOTH_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BOTH +endif + +ifeq ($(strip $(LED_RGB_CONT)), yes) + OPT_DEFS += -DRGBLED_CONT +endif + +ifeq ($(strip $(RGB_MATRIX)), yes) + RGBLIGHT_ENABLE = no + RGB_MATRIX_ENABLE = WS2812 +endif + ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE + OPT_DEFS += -DIOS_DEVICE_ENABLE endif ifeq ($(strip $(LED_ANIMATIONS)), yes) -# OPT_DEFS += -DRGBLIGHT_ANIMATIONS - OPT_DEFS += -DLED_ANIMATIONS +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS + +endif +ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes) + OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT endif ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/zinc/keymaps/ginjake/config.h b/keyboards/zinc/keymaps/ginjake/config.h index 4dcb0724f..2185dc9eb 100644 --- a/keyboards/zinc/keymaps/ginjake/config.h +++ b/keyboards/zinc/keymaps/ginjake/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -// if you need more program area, try uncomment follow line -#include "serial_config_simpleapi.h" // place overrides here // Selection of RGBLIGHT MODE to use. diff --git a/keyboards/zinc/keymaps/ginjake/rules.mk b/keyboards/zinc/keymaps/ginjake/rules.mk index 2dcefc001..2cb59fe8b 100644 --- a/keyboards/zinc/keymaps/ginjake/rules.mk +++ b/keyboards/zinc/keymaps/ginjake/rules.mk @@ -1,12 +1,11 @@ - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality @@ -21,6 +20,8 @@ define ZINC_CUSTOMISE_MSG $(info Zinc customize) $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE)) + $(info - LED_RGB_CONT=$(LED_RGB_CONT)) $(info - LED_ANIMATION=$(LED_ANIMATIONS)) $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) endef @@ -28,6 +29,8 @@ endef # Zinc keyboard customize LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) Link_Time_Optimization = no # if firmware size over limit, try this option @@ -37,7 +40,7 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ### Zinc keyboard 'default' keymap: convenient command line option ## make ZINC=<options> zinc:defualt -## option= back | under | na | ios +## option= back | under | both | cont | na | ios ## ex. ## make ZINC=under zinc:defualt ## make ZINC=under,ios zinc:defualt @@ -48,9 +51,16 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ifneq ($(strip $(ZINC)),) ifeq ($(findstring back,$(ZINC)), back) LED_BACK_ENABLE = yes - else ifeq ($(findstring under,$(ZINC)), under) + endif + ifeq ($(findstring under,$(ZINC)), under) LED_UNDERGLOW_ENABLE = yes endif + ifeq ($(findstring both,$(ZINC)), both) + LED_BOTH_ENABLE = yes + endif + ifeq ($(findstring cont,$(ZINC)), cont) + LED_RGB_CONT = yes + endif ifeq ($(findstring na,$(ZINC)), na) LED_ANIMATIONS = no endif @@ -63,10 +73,11 @@ endif ifeq ($(strip $(LED_BACK_ENABLE)), yes) RGBLIGHT_ENABLE = yes - OPT_DEFS += -DRGBLED_BACK ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) - $(eval $(call ZINC_CUSTOMISE_MSG)) - $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + OPT_DEFS += -DRGBLED_BOTH + $(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE) + else + OPT_DEFS += -DRGBLED_BACK endif else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) RGBLIGHT_ENABLE = yes @@ -74,18 +85,27 @@ else RGBLIGHT_ENABLE = no endif +ifeq ($(strip $(LED_BOTH_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BOTH +endif + +ifeq ($(strip $(LED_RGB_CONT)), yes) + OPT_DEFS += -DRGBLED_CONT +endif + ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE + OPT_DEFS += -DIOS_DEVICE_ENABLE endif ifeq ($(strip $(LED_ANIMATIONS)), yes) -# OPT_DEFS += -DRGBLIGHT_ANIMATIONS - OPT_DEFS += -DLED_ANIMATIONS +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/zinc/keymaps/monks/config.h b/keyboards/zinc/keymaps/monks/config.h index 4dcb0724f..2185dc9eb 100644 --- a/keyboards/zinc/keymaps/monks/config.h +++ b/keyboards/zinc/keymaps/monks/config.h @@ -20,8 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -// if you need more program area, try uncomment follow line -#include "serial_config_simpleapi.h" // place overrides here // Selection of RGBLIGHT MODE to use. diff --git a/keyboards/zinc/keymaps/monks/keymap.c b/keyboards/zinc/keymaps/monks/keymap.c index 5fd7c6aa8..a30e8ac5f 100644 --- a/keyboards/zinc/keymaps/monks/keymap.c +++ b/keyboards/zinc/keymaps/monks/keymap.c @@ -119,6 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \ // define variables for reactive RGB bool TOG_STATUS = false; + // Setting ADJUST layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { @@ -163,7 +164,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; - + case RAISE: if (record->event.pressed) { //not sure how to have keyboard check mode and set it to a variable, so my work around diff --git a/keyboards/zinc/keymaps/monks/readme_jp.md b/keyboards/zinc/keymaps/monks/readme_jp.md index f1495af4c..e518eb769 100644 --- a/keyboards/zinc/keymaps/monks/readme_jp.md +++ b/keyboards/zinc/keymaps/monks/readme_jp.md @@ -100,4 +100,4 @@ RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone に ``` IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -```
\ No newline at end of file +``` diff --git a/keyboards/zinc/keymaps/monks/rules.mk b/keyboards/zinc/keymaps/monks/rules.mk index eeabc004c..c1b98dead 100644 --- a/keyboards/zinc/keymaps/monks/rules.mk +++ b/keyboards/zinc/keymaps/monks/rules.mk @@ -1,12 +1,11 @@ - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality @@ -21,6 +20,8 @@ define ZINC_CUSTOMISE_MSG $(info Zinc customize) $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE)) + $(info - LED_RGB_CONT=$(LED_RGB_CONT)) $(info - LED_ANIMATION=$(LED_ANIMATIONS)) $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) endef @@ -28,6 +29,8 @@ endef # Zinc keyboard customize LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) Link_Time_Optimization = no # if firmware size over limit, try this option @@ -37,7 +40,7 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ### Zinc keyboard 'default' keymap: convenient command line option ## make ZINC=<options> zinc:defualt -## option= back | under | na | ios +## option= back | under | both | cont | na | ios ## ex. ## make ZINC=under zinc:defualt ## make ZINC=under,ios zinc:defualt @@ -48,9 +51,16 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ifneq ($(strip $(ZINC)),) ifeq ($(findstring back,$(ZINC)), back) LED_BACK_ENABLE = yes - else ifeq ($(findstring under,$(ZINC)), under) + endif + ifeq ($(findstring under,$(ZINC)), under) LED_UNDERGLOW_ENABLE = yes endif + ifeq ($(findstring both,$(ZINC)), both) + LED_BOTH_ENABLE = yes + endif + ifeq ($(findstring cont,$(ZINC)), cont) + LED_RGB_CONT = yes + endif ifeq ($(findstring na,$(ZINC)), na) LED_ANIMATIONS = no endif @@ -63,10 +73,11 @@ endif ifeq ($(strip $(LED_BACK_ENABLE)), yes) RGBLIGHT_ENABLE = yes - OPT_DEFS += -DRGBLED_BACK ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) - $(eval $(call ZINC_CUSTOMISE_MSG)) - $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + OPT_DEFS += -DRGBLED_BOTH + $(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE) + else + OPT_DEFS += -DRGBLED_BACK endif else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) RGBLIGHT_ENABLE = yes @@ -74,17 +85,27 @@ else RGBLIGHT_ENABLE = no endif +ifeq ($(strip $(LED_BOTH_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BOTH +endif + +ifeq ($(strip $(LED_RGB_CONT)), yes) + OPT_DEFS += -DRGBLED_CONT +endif + ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE + OPT_DEFS += -DIOS_DEVICE_ENABLE endif ifeq ($(strip $(LED_ANIMATIONS)), yes) -# OPT_DEFS += -DRGBLIGHT_ANIMATIONS - OPT_DEFS += -DLED_ANIMATIONS +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS + endif ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE @@ -94,4 +115,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) # $(info ) - diff --git a/keyboards/zinc/keymaps/toshi0383/config.h b/keyboards/zinc/keymaps/toshi0383/config.h index 33108a29e..0d53d4424 100644 --- a/keyboards/zinc/keymaps/toshi0383/config.h +++ b/keyboards/zinc/keymaps/toshi0383/config.h @@ -21,8 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -// if you need more program area, try uncomment follow line -#include "serial_config_simpleapi.h" // place overrides here // Selection of RGBLIGHT MODE to use. diff --git a/keyboards/zinc/keymaps/toshi0383/rules.mk b/keyboards/zinc/keymaps/toshi0383/rules.mk index dca9aa7ff..26ac02f3a 100644 --- a/keyboards/zinc/keymaps/toshi0383/rules.mk +++ b/keyboards/zinc/keymaps/toshi0383/rules.mk @@ -1,11 +1,12 @@ # Build Options -# change yes to no to disable +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys +MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls @@ -19,6 +20,9 @@ define ZINC_CUSTOMISE_MSG $(info Zinc customize) $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE)) + $(info - LED_RGB_CONT=$(LED_RGB_CONT)) + $(info - RGB_MATRIX=$(RGB_MATRIX)) $(info - LED_ANIMATION=$(LED_ANIMATIONS)) $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) endef @@ -26,6 +30,10 @@ endef # Zinc keyboard customize LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_BOTH_ENABLE = no # LED backlight and underglow +LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc +RGB_MATRIX = no # RGB LED Matrix +RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) Link_Time_Optimization = no # if firmware size over limit, try this option @@ -35,7 +43,7 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ### Zinc keyboard 'default' keymap: convenient command line option ## make ZINC=<options> zinc:defualt -## option= back | under | na | ios +## option= back | under | both | cont | matrix | na | ios ## ex. ## make ZINC=under zinc:defualt ## make ZINC=under,ios zinc:defualt @@ -46,9 +54,22 @@ Link_Time_Optimization = no # if firmware size over limit, try this option ifneq ($(strip $(ZINC)),) ifeq ($(findstring back,$(ZINC)), back) LED_BACK_ENABLE = yes - else ifeq ($(findstring under,$(ZINC)), under) + endif + ifeq ($(findstring under,$(ZINC)), under) LED_UNDERGLOW_ENABLE = yes endif + ifeq ($(findstring both,$(ZINC)), both) + LED_BOTH_ENABLE = yes + endif + ifeq ($(findstring cont,$(ZINC)), cont) + LED_RGB_CONT = yes + endif + ifeq ($(findstring matrix,$(ZINC)), matrix) + RGB_MATRIX = yes + endif + ifeq ($(findstring right,$(ZINC)), right) + RGB_MATRIX_SPLIT_RIGHT = yes + endif ifeq ($(findstring na,$(ZINC)), na) LED_ANIMATIONS = no endif @@ -61,10 +82,11 @@ endif ifeq ($(strip $(LED_BACK_ENABLE)), yes) RGBLIGHT_ENABLE = yes - OPT_DEFS += -DRGBLED_BACK ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) - $(eval $(call ZINC_CUSTOMISE_MSG)) - $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + OPT_DEFS += -DRGBLED_BOTH + $(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE) + else + OPT_DEFS += -DRGBLED_BACK endif else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) RGBLIGHT_ENABLE = yes @@ -72,24 +94,43 @@ else RGBLIGHT_ENABLE = no endif +ifeq ($(strip $(LED_BOTH_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BOTH +endif + +ifeq ($(strip $(LED_RGB_CONT)), yes) + OPT_DEFS += -DRGBLED_CONT +endif + +ifeq ($(strip $(RGB_MATRIX)), yes) + RGBLIGHT_ENABLE = no + RGB_MATRIX_ENABLE = WS2812 +endif + ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE + OPT_DEFS += -DIOS_DEVICE_ENABLE endif ifeq ($(strip $(LED_ANIMATIONS)), yes) -# OPT_DEFS += -DRGBLIGHT_ANIMATIONS - OPT_DEFS += -DLED_ANIMATIONS +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS + +endif + +ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes) + OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT endif ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) # $(info ) - diff --git a/keyboards/zinc/readme.md b/keyboards/zinc/readme.md index 3b4ce105c..0e8d6cd65 100644 --- a/keyboards/zinc/readme.md +++ b/keyboards/zinc/readme.md @@ -5,9 +5,9 @@ Zinc 40% row-staggered split keyboard. -Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP) -Hardware Supported: Zinc PCB -Hardware Availability: (https://twitter.com/monksoffunkJP) +* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP) +* Hardware Supported: Zinc PCB +* Hardware Availability: (https://twitter.com/monksoffunkJP) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/zinc/rev1/config.h b/keyboards/zinc/rev1/config.h index 6713b3098..1eb63df5b 100644 --- a/keyboards/zinc/rev1/config.h +++ b/keyboards/zinc/rev1/config.h @@ -18,9 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#ifndef REV1_CONFIG_H -//#define REV1_CONFIG_H - /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x9991 @@ -33,9 +30,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 100 /* Use I2C or Serial */ -//#define USE_I2C #define USE_SERIAL -//#define USE_MATRIX_I2C +#define SOFT_SERIAL_PIN D2 /* Select hand configuration */ #define MASTER_LEFT @@ -44,18 +40,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* key matrix size */ // Rows are doubled-up - #define MATRIX_ROWS 8 - #define MATRIX_ROW_PINS { F6, F7, B1, B3 } +#define MATRIX_ROWS 8 +#define MATRIX_ROW_PINS { F6, F7, B1, B3 } // wiring of each half #define MATRIX_COLS 6 #define MATRIX_COL_PINS { F4, D4, C6, D7, E6, B4 } -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 +#define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 @@ -67,25 +59,44 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD // RGB LED support //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no // see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes -#ifdef RGBLED_BACK - #define RGBLED_NUM 24 -#else - #define RGBLED_NUM 6 +#ifdef RGBLIGHT_ENABLE + #define RGBLIGHT_SPLIT + #ifdef RGBLED_BACK + #ifdef RGBLED_CONT + #define RGBLED_NUM 48 + #define RGBLED_SPLIT { 24, 24 } + #else + #define RGBLED_NUM 24 + #endif + #else + #ifdef RGBLED_BOTH + #ifdef RGBLED_CONT + #define RGBLED_NUM 60 + #define RGBLED_SPLIT { 30, 30 } +// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29} + #else + #define RGBLED_NUM 30 + #endif + #else + #ifdef RGBLED_CONT + #define RGBLED_NUM 12 + #define RGBLED_SPLIT { 6, 6 } + #else + #define RGBLED_NUM 6 + #endif + #endif + #endif #endif #ifndef IOS_DEVICE_ENABLE - #if RGBLED_NUM <= 6 + #if (RGBLED_NUM <= 6) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 12)) #define RGBLIGHT_LIMIT_VAL 255 #else - #if RGBLED_NUM <= 16 + #if (RGBLED_NUM <= 16) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 32)) #define RGBLIGHT_LIMIT_VAL 130 #else #define RGBLIGHT_LIMIT_VAL 120 @@ -93,10 +104,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 17 #else - #if RGBLED_NUM <= 6 + #if (RGBLED_NUM <= 6) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 12)) #define RGBLIGHT_LIMIT_VAL 90 #else - #if RGBLED_NUM <= 16 + #if (RGBLED_NUM <= 16) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 32)) #define RGBLIGHT_LIMIT_VAL 45 #else #define RGBLIGHT_LIMIT_VAL 35 @@ -136,5 +147,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//#endif diff --git a/keyboards/zinc/rev1/matrix.c b/keyboards/zinc/rev1/matrix.c deleted file mode 100644 index df674ce14..000000000 --- a/keyboards/zinc/rev1/matrix.c +++ /dev/null @@ -1,357 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <string.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "split_scomm.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(D5); - writePinHigh(B0); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(int master_changed) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; -#ifdef SERIAL_USE_MULTI_TRANSACTION - int ret=serial_update_buffers(master_changed); -#else - int ret=serial_update_buffers(); -#endif - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - memcpy(&matrix[slaveOffset], - (void *)serial_slave_buffer, sizeof(serial_slave_buffer)); - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - memcpy(&matrix[offset], - (void *)serial_master_buffer, sizeof(serial_master_buffer)); - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - int mchanged = 1; - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - mchanged = memcmp((void *)serial_master_buffer, - &matrix[offset], sizeof(serial_master_buffer)); - #endif - memcpy((void *)serial_master_buffer, - &matrix[offset], sizeof(serial_master_buffer)); -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction(mchanged) ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - int change = 0; - #endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - #ifdef SERIAL_USE_MULTI_TRANSACTION - if( serial_slave_buffer[i] != matrix[offset+i] ) - change = 1; - #endif - serial_slave_buffer[i] = matrix[offset+i]; - } - #ifdef SERIAL_USE_MULTI_TRANSACTION - slave_buffer_change_count += change; - #endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/zinc/rev1/rev1.c b/keyboards/zinc/rev1/rev1.c index 2ce08a07c..a9c2cfdba 100644 --- a/keyboards/zinc/rev1/rev1.c +++ b/keyboards/zinc/rev1/rev1.c @@ -3,4 +3,3 @@ void matrix_init_kb(void) { matrix_init_user(); }; - diff --git a/keyboards/zinc/rev1/rev1.h b/keyboards/zinc/rev1/rev1.h index aa1c408b0..1bf2c565a 100644 --- a/keyboards/zinc/rev1/rev1.h +++ b/keyboards/zinc/rev1/rev1.h @@ -1,22 +1,7 @@ #pragma once -#include "../zinc.h" - #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - // Standard Keymap // (TRRS jack on both halves are to the left side) #define LAYOUT( \ diff --git a/keyboards/zinc/rev1/rules.mk b/keyboards/zinc/rev1/rules.mk index e78b9258d..d38a61809 100644 --- a/keyboards/zinc/rev1/rules.mk +++ b/keyboards/zinc/rev1/rules.mk @@ -1,4 +1 @@ -SRC += rev1/matrix.c -SRC += rev1/split_util.c -SRC += rev1/split_scomm.c -SRC += ws2812.c +SPLIT_KEYBOARD = yes diff --git a/keyboards/zinc/rev1/serial_config.h b/keyboards/zinc/rev1/serial_config.h deleted file mode 100644 index 9fb5dfc67..000000000 --- a/keyboards/zinc/rev1/serial_config.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H - -#ifndef SOFT_SERIAL_PIN -/* Soft Serial defines */ -#define SOFT_SERIAL_PIN D2 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -#endif - -//// USE flexible API (using multi-type transaction function) -#define SERIAL_USE_MULTI_TRANSACTION - -#endif /* SOFT_SERIAL_CONFIG_H */ diff --git a/keyboards/zinc/rev1/serial_config_simpleapi.h b/keyboards/zinc/rev1/serial_config_simpleapi.h deleted file mode 100644 index e2d22a41e..000000000 --- a/keyboards/zinc/rev1/serial_config_simpleapi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef SERIAL_CONFIG_SIMPLEAPI_H -#define SERIAL_CONFIG_SIMPLEAPI_H - -#undef SERIAL_USE_MULTI_TRANSACTION -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -#endif // SERIAL_CONFIG_SIMPLEAPI_H diff --git a/keyboards/zinc/rev1/split_scomm.c b/keyboards/zinc/rev1/split_scomm.c deleted file mode 100644 index 50d233ce9..000000000 --- a/keyboards/zinc/rev1/split_scomm.c +++ /dev/null @@ -1,95 +0,0 @@ -#ifdef USE_SERIAL -#ifdef SERIAL_USE_MULTI_TRANSACTION -/* --- USE flexible API (using multi-type transaction function) --- */ - -#include <stdbool.h> -#include <stdint.h> -#include <stddef.h> -#include <split_scomm.h> -#include "serial.h" -#ifdef SERIAL_DEBUG_MODE -#include <avr/io.h> -#endif -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; -uint8_t volatile status_com = 0; -uint8_t volatile status1 = 0; -uint8_t slave_buffer_change_count = 0; -uint8_t s_change_old = 0xff; -uint8_t s_change_new = 0xff; - -SSTD_t transactions[] = { -#define GET_SLAVE_STATUS 0 - /* master buffer not changed, only recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - 0, NULL, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define PUT_MASTER_GET_SLAVE_STATUS 1 - /* master buffer changed need send, and recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define GET_SLAVE_BUFFER 2 - /* recive serial_slave_buffer */ - { (uint8_t *)&status1, - 0, NULL, - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - } -}; - -void serial_master_init(void) -{ - soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); -} - -void serial_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); -} - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(int master_update) -{ - int status, smatstatus; - static int need_retry = 0; - - if( s_change_old != s_change_new ) { - smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); - if( smatstatus == TRANSACTION_END ) { - s_change_old = s_change_new; -#ifdef CONSOLE_ENABLE - uprintf("slave matrix = %b %b %b %b %b\n", - serial_slave_buffer[0], serial_slave_buffer[1], - serial_slave_buffer[2], serial_slave_buffer[3], - serial_slave_buffer[4] ); -#endif - } - } else { - // serial_slave_buffer dosen't change - smatstatus = TRANSACTION_END; // dummy status - } - - if( !master_update && !need_retry) { - status = soft_serial_transaction(GET_SLAVE_STATUS); - } else { - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - } - if( status == TRANSACTION_END ) { - s_change_new = slave_buffer_change_count; - need_retry = 0; - } else { - need_retry = 1; - } - return smatstatus; -} - -#endif // SERIAL_USE_MULTI_TRANSACTION -#endif /* USE_SERIAL */ diff --git a/keyboards/zinc/rev1/split_scomm.h b/keyboards/zinc/rev1/split_scomm.h deleted file mode 100644 index 873d8939d..000000000 --- a/keyboards/zinc/rev1/split_scomm.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef SPLIT_COMM_H -#define SPLIT_COMM_H - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ -#include "serial.h" - -#else -/* --- USE flexible API (using multi-type transaction function) --- */ -// Buffers for master - slave communication -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -extern uint8_t slave_buffer_change_count; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(int master_changed); - -#endif - -#endif /* SPLIT_COMM_H */ diff --git a/keyboards/zinc/rev1/split_util.c b/keyboards/zinc/rev1/split_util.c deleted file mode 100644 index e1ff8b437..000000000 --- a/keyboards/zinc/rev1/split_util.c +++ /dev/null @@ -1,70 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "split_scomm.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/zinc/rev1/split_util.h b/keyboards/zinc/rev1/split_util.h deleted file mode 100644 index 687ca19bd..000000000 --- a/keyboards/zinc/rev1/split_util.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/zinc/reva/config.h b/keyboards/zinc/reva/config.h index 8eeb154ac..e94ffb7c6 100644 --- a/keyboards/zinc/reva/config.h +++ b/keyboards/zinc/reva/config.h @@ -30,9 +30,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 100 /* Use I2C or Serial */ -//#define USE_I2C #define USE_SERIAL -//#define USE_MATRIX_I2C +#define SOFT_SERIAL_PIN D2 /* Select hand configuration */ #define MASTER_LEFT @@ -41,18 +40,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* key matrix size */ // Rows are doubled-up - #define MATRIX_ROWS 8 - #define MATRIX_ROW_PINS { D4, C6, D7, E6 } +#define MATRIX_ROWS 8 +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } // wiring of each half #define MATRIX_COLS 6 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3} -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 +#define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 @@ -64,25 +59,44 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -//#define RGBLED_NUM 24 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD // RGB LED support //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no // see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes -#ifdef RGBLED_BACK - #define RGBLED_NUM 24 -#else - #define RGBLED_NUM 6 +#ifdef RGBLIGHT_ENABLE + #define RGBLIGHT_SPLIT + #ifdef RGBLED_BACK + #ifdef RGBLED_CONT + #define RGBLED_NUM 48 + #define RGBLED_SPLIT { 24, 24 } + #else + #define RGBLED_NUM 24 + #endif + #else + #ifdef RGBLED_BOTH + #ifdef RGBLED_CONT + #define RGBLED_NUM 60 + #define RGBLED_SPLIT { 30, 30 } +// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29} + #else + #define RGBLED_NUM 30 + #endif + #else + #ifdef RGBLED_CONT + #define RGBLED_NUM 12 + #define RGBLED_SPLIT { 6, 6 } + #else + #define RGBLED_NUM 6 + #endif + #endif + #endif #endif #ifndef IOS_DEVICE_ENABLE - #if RGBLED_NUM <= 6 + #if (RGBLED_NUM <= 6) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 12)) #define RGBLIGHT_LIMIT_VAL 255 #else - #if RGBLED_NUM <= 16 + #if (RGBLED_NUM <= 16) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 32)) #define RGBLIGHT_LIMIT_VAL 130 #else #define RGBLIGHT_LIMIT_VAL 120 @@ -90,10 +104,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define RGBLIGHT_VAL_STEP 17 #else - #if RGBLED_NUM <= 6 + #if (RGBLED_NUM <= 6) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 12)) #define RGBLIGHT_LIMIT_VAL 90 #else - #if RGBLED_NUM <= 16 + #if (RGBLED_NUM <= 16) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 32)) #define RGBLIGHT_LIMIT_VAL 45 #else #define RGBLIGHT_LIMIT_VAL 35 diff --git a/keyboards/zinc/reva/matrix.c b/keyboards/zinc/reva/matrix.c deleted file mode 100644 index 5b58500db..000000000 --- a/keyboards/zinc/reva/matrix.c +++ /dev/null @@ -1,357 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <string.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "split_scomm.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(B0); - writePinHigh(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(int master_changed) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; -#ifdef SERIAL_USE_MULTI_TRANSACTION - int ret=serial_update_buffers(master_changed); -#else - int ret=serial_update_buffers(); -#endif - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - memcpy(&matrix[slaveOffset], - (void *)serial_slave_buffer, sizeof(serial_slave_buffer)); - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - memcpy(&matrix[offset], - (void *)serial_master_buffer, sizeof(serial_master_buffer)); - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - int mchanged = 1; - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - mchanged = memcmp((void *)serial_master_buffer, - &matrix[offset], sizeof(serial_master_buffer)); - #endif - memcpy((void *)serial_master_buffer, - &matrix[offset], sizeof(serial_master_buffer)); -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction(mchanged) ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - int change = 0; - #endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - #ifdef SERIAL_USE_MULTI_TRANSACTION - if( serial_slave_buffer[i] != matrix[offset+i] ) - change = 1; - #endif - serial_slave_buffer[i] = matrix[offset+i]; - } - #ifdef SERIAL_USE_MULTI_TRANSACTION - slave_buffer_change_count += change; - #endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/zinc/reva/reva.c b/keyboards/zinc/reva/reva.c index 2ce08a07c..a9c2cfdba 100644 --- a/keyboards/zinc/reva/reva.c +++ b/keyboards/zinc/reva/reva.c @@ -3,4 +3,3 @@ void matrix_init_kb(void) { matrix_init_user(); }; - diff --git a/keyboards/zinc/reva/reva.h b/keyboards/zinc/reva/reva.h index aa1c408b0..1bf2c565a 100644 --- a/keyboards/zinc/reva/reva.h +++ b/keyboards/zinc/reva/reva.h @@ -1,22 +1,7 @@ #pragma once -#include "../zinc.h" - #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - // Standard Keymap // (TRRS jack on both halves are to the left side) #define LAYOUT( \ diff --git a/keyboards/zinc/reva/rules.mk b/keyboards/zinc/reva/rules.mk index 3ea61267a..83895bdcb 100644 --- a/keyboards/zinc/reva/rules.mk +++ b/keyboards/zinc/reva/rules.mk @@ -1,4 +1 @@ -SRC += reva/matrix.c -SRC += reva/split_util.c -SRC += reva/split_scomm.c -SRC += ws2812.c +SPLIT_KEYBOARD = yes
\ No newline at end of file diff --git a/keyboards/zinc/reva/serial_config.h b/keyboards/zinc/reva/serial_config.h deleted file mode 100644 index 9fb5dfc67..000000000 --- a/keyboards/zinc/reva/serial_config.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H - -#ifndef SOFT_SERIAL_PIN -/* Soft Serial defines */ -#define SOFT_SERIAL_PIN D2 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -#endif - -//// USE flexible API (using multi-type transaction function) -#define SERIAL_USE_MULTI_TRANSACTION - -#endif /* SOFT_SERIAL_CONFIG_H */ diff --git a/keyboards/zinc/reva/serial_config_simpleapi.h b/keyboards/zinc/reva/serial_config_simpleapi.h deleted file mode 100644 index e2d22a41e..000000000 --- a/keyboards/zinc/reva/serial_config_simpleapi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef SERIAL_CONFIG_SIMPLEAPI_H -#define SERIAL_CONFIG_SIMPLEAPI_H - -#undef SERIAL_USE_MULTI_TRANSACTION -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -#endif // SERIAL_CONFIG_SIMPLEAPI_H diff --git a/keyboards/zinc/reva/split_scomm.c b/keyboards/zinc/reva/split_scomm.c deleted file mode 100644 index 50d233ce9..000000000 --- a/keyboards/zinc/reva/split_scomm.c +++ /dev/null @@ -1,95 +0,0 @@ -#ifdef USE_SERIAL -#ifdef SERIAL_USE_MULTI_TRANSACTION -/* --- USE flexible API (using multi-type transaction function) --- */ - -#include <stdbool.h> -#include <stdint.h> -#include <stddef.h> -#include <split_scomm.h> -#include "serial.h" -#ifdef SERIAL_DEBUG_MODE -#include <avr/io.h> -#endif -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; -uint8_t volatile status_com = 0; -uint8_t volatile status1 = 0; -uint8_t slave_buffer_change_count = 0; -uint8_t s_change_old = 0xff; -uint8_t s_change_new = 0xff; - -SSTD_t transactions[] = { -#define GET_SLAVE_STATUS 0 - /* master buffer not changed, only recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - 0, NULL, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define PUT_MASTER_GET_SLAVE_STATUS 1 - /* master buffer changed need send, and recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define GET_SLAVE_BUFFER 2 - /* recive serial_slave_buffer */ - { (uint8_t *)&status1, - 0, NULL, - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - } -}; - -void serial_master_init(void) -{ - soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); -} - -void serial_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); -} - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(int master_update) -{ - int status, smatstatus; - static int need_retry = 0; - - if( s_change_old != s_change_new ) { - smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); - if( smatstatus == TRANSACTION_END ) { - s_change_old = s_change_new; -#ifdef CONSOLE_ENABLE - uprintf("slave matrix = %b %b %b %b %b\n", - serial_slave_buffer[0], serial_slave_buffer[1], - serial_slave_buffer[2], serial_slave_buffer[3], - serial_slave_buffer[4] ); -#endif - } - } else { - // serial_slave_buffer dosen't change - smatstatus = TRANSACTION_END; // dummy status - } - - if( !master_update && !need_retry) { - status = soft_serial_transaction(GET_SLAVE_STATUS); - } else { - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - } - if( status == TRANSACTION_END ) { - s_change_new = slave_buffer_change_count; - need_retry = 0; - } else { - need_retry = 1; - } - return smatstatus; -} - -#endif // SERIAL_USE_MULTI_TRANSACTION -#endif /* USE_SERIAL */ diff --git a/keyboards/zinc/reva/split_scomm.h b/keyboards/zinc/reva/split_scomm.h deleted file mode 100644 index 873d8939d..000000000 --- a/keyboards/zinc/reva/split_scomm.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef SPLIT_COMM_H -#define SPLIT_COMM_H - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ -#include "serial.h" - -#else -/* --- USE flexible API (using multi-type transaction function) --- */ -// Buffers for master - slave communication -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -extern uint8_t slave_buffer_change_count; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(int master_changed); - -#endif - -#endif /* SPLIT_COMM_H */ diff --git a/keyboards/zinc/reva/split_util.c b/keyboards/zinc/reva/split_util.c deleted file mode 100644 index e1ff8b437..000000000 --- a/keyboards/zinc/reva/split_util.c +++ /dev/null @@ -1,70 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "split_scomm.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/zinc/reva/split_util.h b/keyboards/zinc/reva/split_util.h deleted file mode 100644 index 687ca19bd..000000000 --- a/keyboards/zinc/reva/split_util.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/zinc/rules.mk b/keyboards/zinc/rules.mk index 63a8cc8fc..36e717d60 100644 --- a/keyboards/zinc/rules.mk +++ b/keyboards/zinc/rules.mk @@ -27,12 +27,8 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = no -USE_I2C = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes DEFAULT_FOLDER = zinc/rev1 diff --git a/keyboards/zinc/serial.c b/keyboards/zinc/serial.c deleted file mode 100644 index f6293c3dc..000000000 --- a/keyboards/zinc/serial.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -//////////////// for backward compatibility //////////////////////////////// -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - #endif - uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - #else - 0, (uint8_t *)NULL, - #endif - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - #else - 0, (uint8_t *)NULL, - #endif - } -}; - -void serial_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void serial_slave_init(void) -{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers() -{ - int result; - result = soft_serial_transaction(); - return result; -} - -#endif // end of Simple API (OLD API, compatible with let's split serial.c) -//////////////////////////////////////////////////////////////////////////// - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/zinc/serial.h b/keyboards/zinc/serial.h deleted file mode 100644 index 7e0c0847a..000000000 --- a/keyboards/zinc/serial.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef SOFT_SERIAL_H -#define SOFT_SERIAL_H - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE Simple API (OLD API, compatible with let's split serial.c) -// ex. -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH 1 -// -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ -#if SERIAL_SLAVE_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -#endif -#if SERIAL_MASTER_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -#endif - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); - -#endif // USE Simple API - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif - -#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/zinc/zinc.h b/keyboards/zinc/zinc.h index 87d889da0..dedc9253b 100644 --- a/keyboards/zinc/zinc.h +++ b/keyboards/zinc/zinc.h @@ -1,5 +1,4 @@ -#ifndef ZINC_H -#define ZINC_H +#pragma once #ifdef KEYBOARD_zinc_reva #include "reva.h" @@ -8,7 +7,4 @@ #include "rev1.h" #endif - #include "quantum.h" - -#endif |