Remove custom backlight code for PS2AVRGB boards (#7775)

* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize

6 files changed, 15 insertions, 389 deletions

diff --git a/keyboards/ymdk_np21/backlight.c b/keyboards/ymdk_np21/backlight.c
deleted file mode 100644
index fbd241fa9..000000000
--- a/keyboards/ymdk_np21/backlight.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "backlight.h"
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#include "backlight_custom.h"
-#include "breathing_custom.h"
-
-// DEBUG
-#include <stdlib.h>
-#include <stdio.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
-#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
-
-#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
-
-#define PWM_MAX 0xFF
-#define TIMER_TOP 255 // 8 bit PWM
-
-extern backlight_config_t backlight_config;
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-}
-
-#ifdef BACKLIGHT_ENABLE
-
-// sets up Timer 1 for 8-bit PWM
-void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
-  // default 8 bit mode
-  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
-  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
-
-  // clear output compare value A
-  // outb(OCR1AH, 0);
-  // outb(OCR1AL, 0);
-
-  // clear output comparator registers for B
-	OCR1BH = 0; // outb(OCR1BH, 0);
-	OCR1BL = 0; // outb(OCR1BL, 0);
-}
-
-bool is_init = false;
-void timer1Init(void) {
-  // timer1SetPrescaler(TIMER1PRESCALE)
-  // set to DIV/64
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
-
-  // reset TCNT1
-  TCNT1H = 0;  // outb(TCNT1H, 0);
-	TCNT1L = 0;  // outb(TCNT1L, 0);
-
-  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
-	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
-
-  is_init = true;
-}
-
-void timer1UnInit(void) {
-  // set prescaler back to NONE
-  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
-
-  // disable timer overflow interrupt
-  TIMSK &= ~_BV(TOIE1); // overflow bit?
-
-  setPWM(0);
-
-  is_init = false;
-}
-
-
-// handle TCNT1 overflow
-//! Interrupt handler for tcnt1 overflow interrupt
-ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
-{
-	// sei();
-  // handle breathing here
-  #ifdef BACKLIGHT_BREATHING
-  if (is_breathing()) {
-    custom_breathing_handler();
-  }
-  #endif
-
-  // TODO call user defined function
-}
-
-// enable timer 1 PWM
-// timer1PWMBOn()
-void timer1PWMBEnable(void) {
-  // turn on channel B (OC1B) PWM output
-  // set OC1B as non-inverted PWM
-  TCCR1A |= _BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-// disable timer 1 PWM
-// timer1PWMBOff()
-void timer1PWMBDisable(void) {
-  TCCR1A &= ~_BV(COM1B1);
-  TCCR1A &= ~_BV(COM1B0);
-}
-
-void enableBacklight(void) {
-  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-}
-
-void disableBacklight(void) {
-  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-}
-
-void startPWM(void) {
-  timer1Init();
-  timer1PWMBEnable();
-  enableBacklight();
-}
-
-void stopPWM(void) {
-  timer1UnInit();
-  disableBacklight();
-  timer1PWMBDisable();
-}
-
-void b_led_init_ports(void) {
-  /* turn backlight on/off depending on user preference */
-  #if BACKLIGHT_ON_STATE == 0
-    // DDRx register: sets the direction of Port D
-    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
-    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
-  #else
-    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
-    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
-  #endif
-
-  timer1PWMSetup();
-  startPWM();
-
-  #ifdef BACKLIGHT_BREATHING
-  breathing_enable();
-  #endif
-}
-
-void b_led_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS) {
-    level = BACKLIGHT_LEVELS;
-  }
-
-  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
-}
-
-// called every matrix scan
-void b_led_task(void) {
-  // do nothing for now
-}
-
-void setPWM(uint16_t xValue) {
-  if (xValue > TIMER_TOP) {
-    xValue = TIMER_TOP;
-  }
-  OCR1B = xValue; // timer1PWMBSet(xValue);
-}
-
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/backlight_custom.h b/keyboards/ymdk_np21/backlight_custom.h
deleted file mode 100644
index 7210be840..000000000
--- a/keyboards/ymdk_np21/backlight_custom.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifndef BACKLIGHT_CUSTOM_H
-#define BACKLIGHT_CUSTOM_H
-
-#include <avr/pgmspace.h>
-void b_led_init_ports(void);
-void b_led_set(uint8_t level);
-void b_led_task(void);
-void setPWM(uint16_t xValue);
-
-#endif  // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/ymdk_np21/breathing_custom.h b/keyboards/ymdk_np21/breathing_custom.h
deleted file mode 100644
index 71416b1b4..000000000
--- a/keyboards/ymdk_np21/breathing_custom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
- * Works in conjunction with `backlight.c`.
- *
- * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
- * handler in `backlight.c` instead of setting up its own timer.
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#ifdef BACKLIGHT_ENABLE
-#ifdef BACKLIGHT_BREATHING
-
-#include "backlight_custom.h"
-
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
-
-// TODO make this share code with quantum.c
-
-#define BREATHING_NO_HALT  0
-#define BREATHING_HALT_OFF 1
-#define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
-
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-static bool breathing = false;
-
-bool is_breathing(void) {
-  return breathing;
-}
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-void breathing_enable(void) {
-  breathing = true;
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  // interrupt already registered
-}
-
-void breathing_pulse(void) {
-  if (get_backlight_level() == 0)
-    breathing_min();
-  else
-    breathing_max();
-  breathing_halt = BREATHING_HALT_ON;
-  // breathing_interrupt_enable();
-  breathing = true;
-}
-
-void breathing_disable(void) {
-  breathing = false;
-  // backlight_set(get_backlight_level());
-  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
-}
-
-void breathing_self_disable(void)
-{
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
-}
-
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
-{
-  if (!value)
-    value = 1;
-  breathing_period = value;
-}
-
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
-{
-  breathing_period_set(breathing_period+1);
-}
-
-void breathing_period_dec(void)
-{
-  breathing_period_set(breathing_period-1);
-}
-
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
- */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-void custom_breathing_handler(void) {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
-
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      // breathing_interrupt_disable();
-  }
-
-  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
-}
-
-#endif // BACKLIGHT_BREATHING
-#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h
index 60c527776..91478d903 100644
--- a/keyboards/ymdk_np21/config.h
+++ b/keyboards/ymdk_np21/config.h
@@ -15,10 +15,9 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "config_common.h"
+#pragma once
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#include "config_common.h"
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
@@ -37,8 +36,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
-// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+#define BACKLIGHT_BREATHING
 
 #define TAPPING_TOGGLE 3
 
@@ -52,5 +52,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 5
 #define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
 #define RGBLIGHT_ANIMATIONS
-
-#endif
diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk
index 772bee928..237386bce 100644
--- a/keyboards/ymdk_np21/rules.mk
+++ b/keyboards/ymdk_np21/rules.mk
@@ -19,7 +19,6 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 
 BACKLIGHT_ENABLE = yes
-BACKLIGHT_CUSTOM_DRIVER = yes
 
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = i2c
@@ -30,5 +29,3 @@ KEY_LOCK_ENABLE = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = backlight.c
diff --git a/keyboards/ymdk_np21/ymdk_np21.c b/keyboards/ymdk_np21/ymdk_np21.c
index f2b3d46da..5bf159758 100644
--- a/keyboards/ymdk_np21/ymdk_np21.c
+++ b/keyboards/ymdk_np21/ymdk_np21.c
@@ -18,20 +18,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymdk_np21.h"
 
-#include "backlight.h"
-#include "backlight_custom.h"
-
-#ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
-void backlight_init_ports(void) {
-  b_led_init_ports();
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
 }
 
-void backlight_task(void) {
-  b_led_task();
+void led_init_ports(void) {
+    setPinOutput(D0);
+    writePinHigh(D0);
 }
 
-void backlight_set(uint8_t level) {
-  b_led_set(level);
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D0, !led_state.num_lock);
+    }
+    return true;
 }
-#endif