remove hardware files, move arrow pad

13 files changed, 0 insertions, 1218 deletions

diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile
deleted file mode 100644
index 4e2a6f00f..000000000
--- a/keyboards/arrow_pad/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-ifndef MAKEFILE_INCLUDED
-	include ../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/arrow_pad/arrow_pad.c b/keyboards/arrow_pad/arrow_pad.c
deleted file mode 100644
index 381934aa8..000000000
--- a/keyboards/arrow_pad/arrow_pad.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "arrow_pad.h"
\ No newline at end of file
diff --git a/keyboards/arrow_pad/arrow_pad.h b/keyboards/arrow_pad/arrow_pad.h
deleted file mode 100644
index 62882b9b5..000000000
--- a/keyboards/arrow_pad/arrow_pad.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef ARROW_PAD_H
-#define ARROW_PAD_H
-
-#include "quantum.h"
-#include "matrix.h"
-#include "keymap.h"
-#ifdef BACKLIGHT_ENABLE
-	#include "backlight.h"
-#endif
-#include <avr/io.h>
-#include <stddef.h>
-
-#endif
diff --git a/keyboards/arrow_pad/config.h b/keyboards/arrow_pad/config.h
deleted file mode 100644
index 3d8d8709a..000000000
--- a/keyboards/arrow_pad/config.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4096
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Nobody
-#define PRODUCT         GoldPad
-#define DESCRIPTION     A custom keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/arrow_pad/keymaps/default/keymap.c b/keyboards/arrow_pad/keymaps/default/keymap.c
deleted file mode 100644
index 5647f75af..000000000
--- a/keyboards/arrow_pad/keymaps/default/keymap.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "arrow_pad.h"
-#include "led.h"
-
-// This is the 21-key keypad to 2x11 element matrix mapping
-#define KEYMAP( \
-    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
-    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
-    KM___7, KM___8, KM___9, KM_EQU, \
-    KM___4, KM___5, KM___6, KM_PLS, \
-    KM___1, KM___2, KM___3, ___ENT, \
-    KM___0, _____0, KM_DOT, KM_ENT  \
-) { \
-    { KM_ESC, KM_TAB, KM_BSL, KM_ARR  }, \
-    { KM_NUM, KM_FSL, KM_AST, KM_MIN  }, \
-    { KM___7, KM___8, KM___9, KM_EQU  }, \
-    { KM___4, KM___5, KM___6, KM_PLS  }, \
-    { KM___1, KM___2, KM___3, KC_NO   }, \
-    { KM___0, KC_NO,  KM_DOT, KM_ENT  }  \
-}
-
-#define LAYER_BASE                      0
-#define LAYER_EDIT                      1
-#define LAYER_FUNCTION                  2
-
-#define MACRO_COPY_CUT                  0
-#define MACRO_SHIFT_CONTROL             1
-#define MACRO_CONTROL_ALT               2
-
-#define M_COPY              KC_FN5
-#define M_SHFCT             KC_FN6
-#define M_CTALT             KC_FN7
-
-#define SC_UNDO             LCTL(KC_Z)
-#define SC_REDO             LCTL(KC_Y)
-#define SC_CUT              LCTL(KC_X)
-#define SC_COPY             LCTL(KC_C)
-#define SC_PSTE             LCTL(KC_V)
-#define SC_SELA             LCTL(KC_A)
-#define SC_SAVE             LCTL(KC_S)
-#define SC_OPEN             LCTL(KC_O)
-#define SC_ACLS             LALT(KC_F4)
-#define SC_CCLS             LCTL(KC_F4)
-
-#define _______             KC_TRNS
-#define XXXXXXX             KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[LAYER_BASE] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_BSLS, KC_FN0,  \
-  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
-  KC_P7,   KC_P8,   KC_P9,   KC_PEQL, \
-  KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-  KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
-  KC_P0,   KC_PCMM, KC_PDOT, KC_PENT  ),
-
-[LAYER_EDIT] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_SPC,  _______, \
-  KC_FN1,  SC_PSTE, SC_REDO, SC_UNDO, \
-  KC_HOME, KC_UP,   KC_PGUP, KC_LALT, \
-  KC_LEFT, M_COPY,  KC_RGHT, KC_LCTL, \
-  KC_END,  KC_DOWN, KC_PGDN, XXXXXXX, \
-  KC_BSPC, KC_PENT, KC_DEL,  M_SHFCT),
-
-[LAYER_FUNCTION] = KEYMAP(            \
-  KC_FN2,  KC_FN3,  KC_FN4,  _______, \
-  KC_FN1,  _______, _______, _______, \
-  _______, _______, _______, _______, \
-  _______, _______, _______, _______, \
-  _______, _______, _______, XXXXXXX, \
-  RESET,   _______, _______, _______  ),
-
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
-	[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
-	[2] = ACTION_BACKLIGHT_TOGGLE(),
-	[3] = ACTION_BACKLIGHT_INCREASE(),
-	[4] = ACTION_BACKLIGHT_DECREASE(),
-	[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
-    [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
-    [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
-
-};
-
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-}
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-    switch (id) {
-
-    case MACRO_COPY_CUT:
-        if (record->event.pressed) {
-            register_code(KC_LCTL);
-            if (record->tap.count == 1) {
-                register_code(KC_C);
-                unregister_code(KC_C);
-            }
-            else if (record->tap.count == 2) {
-                register_code(KC_X);
-                unregister_code(KC_X);
-            }
-            unregister_code(KC_LCTL);
-        }
-        break;
-
-    case MACRO_SHIFT_CONTROL:
-        if (record->event.pressed) {
-            if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
-            if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count == 3) register_code(KC_PENT);;
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
-            unregister_code(KC_PENT);
-        }
-        break;
-
-    case MACRO_CONTROL_ALT:
-        if (record->event.pressed) {
-            if (record->tap.count < 2)  register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
-        }
-        break;
-    }
-
-    return MACRO_NONE;
-}
-
-void led_set_user(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output high
-        DDRD |= (1<<6);
-        PORTD |= (1<<6);
-    } else {
-        // Hi-Z
-        DDRD &= ~(1<<6);
-        PORTD &= ~(1<<6);
-    }
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // output low
-        DDRC |= (1<<7);
-        PORTC |= ~(1<<7);
-    } else {
-        // Hi-Z
-        DDRC &= ~(1<<7);
-        PORTC &= ~(1<<7);
-    }
-}
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_21/Makefile b/keyboards/arrow_pad/keymaps/pad_21/Makefile
deleted file mode 100644
index af51976a8..000000000
--- a/keyboards/arrow_pad/keymaps/pad_21/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
-CONSOLE_ENABLE   = no  # Console for debug(+400)
-COMMAND_ENABLE   = yes # Commands for debug and configuration
-NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-MIDI_ENABLE      = no  # MIDI controls
-AUDIO_ENABLE     = no  # Audio output on port C6
-UNICODE_ENABLE   = no  # Unicode
-BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-
-CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_21/config.h b/keyboards/arrow_pad/keymaps/pad_21/config.h
deleted file mode 100644
index a095e8737..000000000
--- a/keyboards/arrow_pad/keymaps/pad_21/config.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4097
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Nobody
-#define PRODUCT         Arrow Pad 21
-#define DESCRIPTION     21-Key QMK Assistant
-
-/* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 11
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/arrow_pad/keymaps/pad_21/keymap.c
deleted file mode 100644
index 28917a5d9..000000000
--- a/keyboards/arrow_pad/keymaps/pad_21/keymap.c
+++ /dev/null
@@ -1,160 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "arrow_pad.h"
-#include "led.h"
-
-// This is the 21-key keypad to 2x11 element matrix mapping
-#define KEYMAP( \
-    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
-    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
-    KM___7, KM___8, KM___9, ___PLS, \
-    KM___4, KM___5, KM___6, KM_PLS, \
-    KM___1, KM___2, KM___3, ___ENT, \
-    KM___0, _____0, KM_DOT, KM_ENT  \
-) { \
-    { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
-    { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO,  KM___0, KM_DOT, }, \
-}
-
-
-#define LAYER_BASE                      0
-#define LAYER_EDIT                      1
-#define LAYER_FUNCTION                  2
-
-#define MACRO_COPY_CUT                  0
-#define MACRO_SHIFT_CONTROL             1
-#define MACRO_CONTROL_ALT               2
-
-#define M_COPY              KC_FN5
-#define M_SHFCT             KC_FN6
-#define M_CTALT             KC_FN7
-
-#define SC_UNDO             LCTL(KC_Z)
-#define SC_REDO             LCTL(KC_Y)
-#define SC_CUT              LCTL(KC_X)
-#define SC_COPY             LCTL(KC_C)
-#define SC_PSTE             LCTL(KC_V)
-#define SC_SELA             LCTL(KC_A)
-#define SC_SAVE             LCTL(KC_S)
-#define SC_OPEN             LCTL(KC_O)
-#define SC_ACLS             LALT(KC_F4)
-#define SC_CCLS             LCTL(KC_F4)
-
-#define _______             KC_TRNS
-#define XXXXXXX             KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[LAYER_BASE] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_BSLS, KC_FN0,  \
-  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
-  KC_P7,   KC_P8,   KC_P9,   XXXXXXX, \
-  KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-  KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
-  KC_P0,   XXXXXXX, KC_PDOT, KC_PENT  ),
-
-[LAYER_EDIT] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_SPC,  _______, \
-  KC_FN1,  SC_PSTE, SC_REDO, SC_UNDO, \
-  KC_HOME, KC_UP,   KC_PGUP, XXXXXXX, \
-  KC_LEFT, M_COPY,  KC_RGHT, M_CTALT, \
-  KC_END,  KC_DOWN, KC_PGDN, XXXXXXX, \
-  KC_BSPC, XXXXXXX, KC_DEL,  M_SHFCT),
-
-[LAYER_FUNCTION] = KEYMAP(            \
-  KC_FN2,  KC_FN3,  KC_FN4,  _______, \
-  KC_FN1,  _______, _______, _______, \
-  _______, _______, _______, XXXXXXX, \
-  _______, _______, _______, _______, \
-  _______, _______, _______, XXXXXXX, \
-  RESET,   XXXXXXX, _______, _______  ),
-
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
-	[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
-	[2] = ACTION_BACKLIGHT_TOGGLE(),
-	[3] = ACTION_BACKLIGHT_INCREASE(),
-	[4] = ACTION_BACKLIGHT_DECREASE(),
-	[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
-    [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
-    [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
-
-};
-
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-}
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-    switch (id) {
-
-    case MACRO_COPY_CUT:
-        if (record->event.pressed) {
-            register_code(KC_LCTL);
-            if (record->tap.count == 1) {
-                register_code(KC_C);
-                unregister_code(KC_C);
-            }
-            else if (record->tap.count == 2) {
-                register_code(KC_X);
-                unregister_code(KC_X);
-            }
-            unregister_code(KC_LCTL);
-        }
-        break;
-
-    case MACRO_SHIFT_CONTROL:
-        if (record->event.pressed) {
-            if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
-            if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count == 3) register_code(KC_PENT);;
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
-            unregister_code(KC_PENT);
-        }
-        break;
-
-    case MACRO_CONTROL_ALT:
-        if (record->event.pressed) {
-            if (record->tap.count < 2)  register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
-        }
-        break;
-    }
-
-    return MACRO_NONE;
-}
-
-void led_set_user(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output high
-        DDRD |= (1<<6);
-        PORTD |= (1<<6);
-    } else {
-        // Hi-Z
-        DDRD &= ~(1<<6);
-        PORTD &= ~(1<<6);
-    }
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // output low
-        DDRC |= (1<<7);
-        PORTC |= ~(1<<7);
-    } else {
-        // Hi-Z
-        DDRC &= ~(1<<7);
-        PORTC &= ~(1<<7);
-    }
-}
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_24/Makefile b/keyboards/arrow_pad/keymaps/pad_24/Makefile
deleted file mode 100644
index e31bfe1af..000000000
--- a/keyboards/arrow_pad/keymaps/pad_24/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
-CONSOLE_ENABLE   = no  # Console for debug(+400)
-COMMAND_ENABLE   = yes # Commands for debug and configuration
-NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-MIDI_ENABLE      = no  # MIDI controls
-AUDIO_ENABLE     = no  # Audio output on port C6
-UNICODE_ENABLE   = no  # Unicode
-BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-
-CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_24/config.h b/keyboards/arrow_pad/keymaps/pad_24/config.h
deleted file mode 100644
index e940acaa0..000000000
--- a/keyboards/arrow_pad/keymaps/pad_24/config.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4096
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Nobody
-#define PRODUCT         Arrow Pad 24
-#define DESCRIPTION     24-Key QMK Assistant
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3 }
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B7
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/arrow_pad/keymaps/pad_24/keymap.c
deleted file mode 100644
index 5647f75af..000000000
--- a/keyboards/arrow_pad/keymaps/pad_24/keymap.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "arrow_pad.h"
-#include "led.h"
-
-// This is the 21-key keypad to 2x11 element matrix mapping
-#define KEYMAP( \
-    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
-    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
-    KM___7, KM___8, KM___9, KM_EQU, \
-    KM___4, KM___5, KM___6, KM_PLS, \
-    KM___1, KM___2, KM___3, ___ENT, \
-    KM___0, _____0, KM_DOT, KM_ENT  \
-) { \
-    { KM_ESC, KM_TAB, KM_BSL, KM_ARR  }, \
-    { KM_NUM, KM_FSL, KM_AST, KM_MIN  }, \
-    { KM___7, KM___8, KM___9, KM_EQU  }, \
-    { KM___4, KM___5, KM___6, KM_PLS  }, \
-    { KM___1, KM___2, KM___3, KC_NO   }, \
-    { KM___0, KC_NO,  KM_DOT, KM_ENT  }  \
-}
-
-#define LAYER_BASE                      0
-#define LAYER_EDIT                      1
-#define LAYER_FUNCTION                  2
-
-#define MACRO_COPY_CUT                  0
-#define MACRO_SHIFT_CONTROL             1
-#define MACRO_CONTROL_ALT               2
-
-#define M_COPY              KC_FN5
-#define M_SHFCT             KC_FN6
-#define M_CTALT             KC_FN7
-
-#define SC_UNDO             LCTL(KC_Z)
-#define SC_REDO             LCTL(KC_Y)
-#define SC_CUT              LCTL(KC_X)
-#define SC_COPY             LCTL(KC_C)
-#define SC_PSTE             LCTL(KC_V)
-#define SC_SELA             LCTL(KC_A)
-#define SC_SAVE             LCTL(KC_S)
-#define SC_OPEN             LCTL(KC_O)
-#define SC_ACLS             LALT(KC_F4)
-#define SC_CCLS             LCTL(KC_F4)
-
-#define _______             KC_TRNS
-#define XXXXXXX             KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[LAYER_BASE] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_BSLS, KC_FN0,  \
-  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
-  KC_P7,   KC_P8,   KC_P9,   KC_PEQL, \
-  KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-  KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
-  KC_P0,   KC_PCMM, KC_PDOT, KC_PENT  ),
-
-[LAYER_EDIT] = KEYMAP(                \
-  KC_ESC,  KC_TAB,  KC_SPC,  _______, \
-  KC_FN1,  SC_PSTE, SC_REDO, SC_UNDO, \
-  KC_HOME, KC_UP,   KC_PGUP, KC_LALT, \
-  KC_LEFT, M_COPY,  KC_RGHT, KC_LCTL, \
-  KC_END,  KC_DOWN, KC_PGDN, XXXXXXX, \
-  KC_BSPC, KC_PENT, KC_DEL,  M_SHFCT),
-
-[LAYER_FUNCTION] = KEYMAP(            \
-  KC_FN2,  KC_FN3,  KC_FN4,  _______, \
-  KC_FN1,  _______, _______, _______, \
-  _______, _______, _______, _______, \
-  _______, _______, _______, _______, \
-  _______, _______, _______, XXXXXXX, \
-  RESET,   _______, _______, _______  ),
-
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
-	[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
-	[2] = ACTION_BACKLIGHT_TOGGLE(),
-	[3] = ACTION_BACKLIGHT_INCREASE(),
-	[4] = ACTION_BACKLIGHT_DECREASE(),
-	[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
-    [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
-    [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
-
-};
-
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-}
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-    switch (id) {
-
-    case MACRO_COPY_CUT:
-        if (record->event.pressed) {
-            register_code(KC_LCTL);
-            if (record->tap.count == 1) {
-                register_code(KC_C);
-                unregister_code(KC_C);
-            }
-            else if (record->tap.count == 2) {
-                register_code(KC_X);
-                unregister_code(KC_X);
-            }
-            unregister_code(KC_LCTL);
-        }
-        break;
-
-    case MACRO_SHIFT_CONTROL:
-        if (record->event.pressed) {
-            if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
-            if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count == 3) register_code(KC_PENT);;
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
-            unregister_code(KC_PENT);
-        }
-        break;
-
-    case MACRO_CONTROL_ALT:
-        if (record->event.pressed) {
-            if (record->tap.count < 2)  register_mods(MOD_BIT(KC_LCTL));
-            if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
-        }
-        else {
-            unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
-        }
-        break;
-    }
-
-    return MACRO_NONE;
-}
-
-void led_set_user(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output high
-        DDRD |= (1<<6);
-        PORTD |= (1<<6);
-    } else {
-        // Hi-Z
-        DDRD &= ~(1<<6);
-        PORTD &= ~(1<<6);
-    }
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-        // output low
-        DDRC |= (1<<7);
-        PORTC |= ~(1<<7);
-    } else {
-        // Hi-Z
-        DDRC &= ~(1<<7);
-        PORTC &= ~(1<<7);
-    }
-}
\ No newline at end of file
diff --git a/keyboards/arrow_pad/readme.md b/keyboards/arrow_pad/readme.md
deleted file mode 100644
index d0d172272..000000000
--- a/keyboards/arrow_pad/readme.md
+++ /dev/null
@@ -1,133 +0,0 @@
-arrow_pad keyboard firmware
-======================
-
-## Keyboard Info
-
-The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator.
-
-The first 24-key ArrowPad was handwired, but the PCB was wired as listed below.
-
-```
-<Chip Ref Des> pin <Pin #>
-<Keycap Name> (Silkscreen Name if different) - <Switch Pin #>
-
-
-Note:
-U2 pin 2 is the Num Lock LED and is  active low.
-
-U2 pin 1
-Clear (Num Lock) - 1
-Enter - 2
-Esc (ESC) - 2
-
-
-U2 pin 3
-- - 1
-
-U2 pin 4
-7 - 2
-8 - 2
-9 - 2
-
-U2 pin 5
-* - 2
-Delete (BACK SPACE) -  2
-
-U2 pin 6
-1 - 2
-0 - 2
-. - 2
-, - 2
-
-U2 pin 7
-4 - 2
-5 - 2
-6 - 2
-
-U2 pin 8
-Tab - 2
-= (/) - 2
-
-U2 pin 13
-Delete (BACK SPACE) -  1
-9 - 1
-6 - 1
-3 - 1
-. - 1
-
-U2 pin 14
-Tab - 1
-8 - 1
-5 - 1
-2 - 1
-0 - 1
-
-U2 pin 15
-Esc (ESC) - 1
-= (/) - 1
-/ (*) - 1
-7 - 1
-4 - 1
-1 - 1
-+ - 1
-
-U2 pin 16
-Enter - 1
-* (<--) - 1
-, - 1
-
-U2 pin 17
-Fn (#NAME?) - 1
-- - 2
-Clear (Num Lock) - 2
-
-U2 pin 18
-Fn (#NAME?) - 2
-* (<--) - 2
-+ - 2
-3 - 2
-2 - 2
-```
-
-More info can be found on [GeekHack](https://geekhack.org/index.php?topic=73632.msg1802497#msg1802497)
-
-The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix.
-
-```
-#define KEYMAP( \
-    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
-    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
-    KM___7, KM___8, KM___9, ___PLS, \
-    KM___4, KM___5, KM___6, KM_PLS, \
-    KM___1, KM___2, KM___3, ___ENT, \
-    KM___0, _____0, KM_DOT, KM_ENT  \
-) { \
-    { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
-    { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO,  KM___0, KM_DOT, }, \
-}
-```
-
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|pad_21|pad_24|<name>]
-```
-
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/arrow_pad/rules.mk b/keyboards/arrow_pad/rules.mk
deleted file mode 100644
index 3dca9b6ea..000000000
--- a/keyboards/arrow_pad/rules.mk
+++ /dev/null
@@ -1,70 +0,0 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file