Alternate keymap for Alpha keyboard, enjoy! (#4797)

* Create README.md

* Add files via upload

* Update README.md

1 files changed, 35 insertions, 0 deletions

diff --git a/keyboards/alpha/keymaps/vderm/README.md b/keyboards/alpha/keymaps/vderm/README.md
new file mode 100644
index 000000000..26a8ab3e8
--- /dev/null
+++ b/keyboards/alpha/keymaps/vderm/README.md
@@ -0,0 +1,35 @@
+# Alpha 28-Key Keyboard Alternate Keymap
+Alternate keymap for [Alpha 28-key keyboard](https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha).
+
+## How-to
+Assuming you've followed all the instructions from the original post, put my "keymap.c" file in "$qmk-firmware-folder$/keyboards/alpha/keymaps/vderm/" and then run your make command ("make alpha:vderm" while in $qmk-firmware-folder$ where this folder is what you've downloaded from the official github page) to compile the hex file to upload to your microcontroller. I've also uploaded my hex file.
+
+## Description
+Instead of going up and down layers like in the original Alpha keyboard, I've made the bottom row keys all have alternate functions:
++ Like in the original Alpha28 keymap, the 2U spacebar is a shift key when held down and space when tapped
++ Z and M are Ctrl keys when held down or Z and M when tapped
++ X and N are Alt keys
++ C activates the function keys layer (arrows, page up/dn, esc, tab, etc.)
++ V activates the characters and numbers layer
++ C and V combined activated the F-keys layer (F1, F2, F3, etc.)
++ The enter key is an enter key in the home layer, backspace in the function keys and characters/numbers layer and a delete in the F-keys layer
++ While in the other layers, the bottom row acts like a "regular" bottom modified row: ctrl, alt, winkey
+
+## Keymap
+![keymap](https://imgur.com/ZbDz0eL.jpg)
+
+## Build Images
+Here is my keyboard.
++ Switches: Aliaz Silent Switches (Tactile), PCB mount, 80g from [KBDfans](https://kbdfans.cn/collections/aliaz-switches/products/pre-orderaliaz-silent-switch-tactile?variant=2519899832333)
++ PCB board: ordered from JLCPCB, in white
++ Keycaps: ebay, can't find link :S
++ Bottom plate: I cut a piece of canary wood that was laying around, needs to be varnished; I also need to actually screw the pcb to the wood instead of relying on double-sided tape
+
+![vderm_alpha0](https://imgur.com/MjjoVtr.jpg)
+![vderm_alpha1](https://imgur.com/mIFu9WV.jpg)
+![vderm_alpha2](https://imgur.com/A70Iemw.jpg)
+![vderm_alpha3](https://imgur.com/eYljPWh.jpg)
+![vderm_alpha4](https://imgur.com/OhUKowj.jpg)
+
+Good luck on your build!  
+//vderm