[Keyboard] 1up60hte cleanup + bugfix (#6763)

* move caps lock led to keyboard level so even QMK Configurator users have access to it

* set bootloader correctly to atmel-dfu

* clean up extra carriage return

5 files changed, 18 insertions, 80 deletions

diff --git a/keyboards/1upkeyboards/1up60hte/1up60hte.c b/keyboards/1upkeyboards/1up60hte/1up60hte.c
index 460e42a0e..3af0e9d40 100644
--- a/keyboards/1upkeyboards/1up60hte/1up60hte.c
+++ b/keyboards/1upkeyboards/1up60hte/1up60hte.c
@@ -16,3 +16,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "1up60hte.h"
+
+void keyboard_pre_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+    setPinOutput(B6);
+    keyboard_pre_init_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+    led_set_user(usb_led);
+}
\ No newline at end of file
diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
index 359ac7540..2f91e1c76 100644
--- a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
+++ b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
@@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
-
-void matrix_init_user(void) {
-  setPinOutput(B6);
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(B6);
-	} else {
-		writePinHigh(B6);
-	}
-}
diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
index 5312e3b67..81e29ec19 100644
--- a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
+++ b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
@@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
-
-void matrix_init_user(void) {
-  setPinOutput(B6);
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(B6);
-	} else {
-		writePinHigh(B6);
-	}
-}
diff --git a/keyboards/1upkeyboards/1up60hte/readme.md b/keyboards/1upkeyboards/1up60hte/readme.md
index 93767c541..b49773fd7 100644
--- a/keyboards/1upkeyboards/1up60hte/readme.md
+++ b/keyboards/1upkeyboards/1up60hte/readme.md
@@ -8,7 +8,6 @@ A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a
 
 Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
 Hardware Supported: 1up60hte 60% PCB  
-
 Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
 
 Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/1upkeyboards/1up60hte/rules.mk b/keyboards/1upkeyboards/1up60hte/rules.mk
index 860a754a6..e994785ba 100644
--- a/keyboards/1upkeyboards/1up60hte/rules.mk
+++ b/keyboards/1upkeyboards/1up60hte/rules.mk
@@ -1,50 +1,12 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
@@ -54,6 +16,5 @@ NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https:/
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
-EXTRAFLAGS += -flto
 
 LAYOUTS = 60_hhkb