Merge branch 'user_led_configuration' into infinity60

Conflicts:
	keyboards/infinity60/keymaps/jpetermans/keymap.c

7 files changed, 595 insertions, 616 deletions

diff --git a/keyboards/infinity60/MEMO.txt b/keyboards/infinity60/MEMO.txt
deleted file mode 100644
index e2886aa00..000000000
--- a/keyboards/infinity60/MEMO.txt
+++ /dev/null
@@ -1,385 +0,0 @@
-flabbergast's TMK/ChibiOS port
-==============================
-2015/10/16
-
-
-Build
------
-$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
-
-$ cd tmk_keyboard
-$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-or
-$ cd tmk_keyboard/tmk_core/tool/chibios
-$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-
-$ cd tmk_keyboard/keyboard/infinity_chibios
-$ make
-
-
-
-
-Chibios Configuration
----------------------
-halconf.h: for HAL configuration
-    placed in project directory
-    read in chibios/os/hal/hal.mk
-    included in chibios/os/hal/include/hal.h
-mcuconf.h: for MCU configuration
-    placed in project directory
-    included in halconf.h
-
-
-Chibios Term
-------------
-PAL = Port Abstraction Layer
-    palWritePad
-    palReadPad
-    palSetPad
-    chibios/os/hal/include/pal.h
-
-LLD = Low Level Driver
-
-
-Makefile
---------
-    #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-    MCU_FAMILY = KINETIS
-    MCU_SERIES = KL2x
-
-    # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-    #   or <this_dir>/ld/
-    MCU_LDSCRIPT = MKL26Z64
-
-    #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-    MCU_STARTUP = kl2x
-
-    # Board: it should exist either in <chibios>/os/hal/boards/
-    #  or <this_dir>/boards
-    BOARD = PJRC_TEENSY_LC
-
-    MCU  = cortex-m0
-
-    # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-    ARMV = 6
-
-
-halconf.h
----------
-
-
-mcuconf.h
----------
-
-
-chconf.h
---------
-
-
-ld script
----------
---- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld     2015-10-15 09:08:58.732904304 +0900
-+++ ld/MKL26Z64.ld      2015-10-15 08:48:06.430215496 +0900
-@@ -27,7 +27,8 @@
- {
-   flash0   :  org = 0x00000000,  len = 0xc0
-   flashcfg :  org = 0x00000400,  len = 0x10
--  flash    :  org = 0x00000410,  len = 64k - 0x410
-+  flash    :  org = 0x00000410,  len = 62k - 0x410
-+  eeprom_emu : org = 0x0000F800, len = 2k
-   ram      :  org = 0x1FFFF800,  len = 8k
- }
-
-@@ -35,6 +36,10 @@
- __ram_size__            = LENGTH(ram);
- __ram_end__             = __ram_start__ + __ram_size__;
-
-+__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
-+__eeprom_workarea_size__  = LENGTH(eeprom_emu);
-+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-+
- SECTIONS
- {
-   . = 0;
-
-
-
-Configuration/Startup for Infinity 60%
---------------------------------------
-Configuration:
-
-
-Clock:
-Inifinity   
-    FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
-    Clock dividor:
-    SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
-    SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
-    SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
-    Internal reference clock:
-    MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
-    MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
-    FLL multipilication:
-    MCG_C4[DMX32] = 1
-    MCG_C4[DRST_DRS] = 01   FLL factor 1464 * 32.768kHz = 48MHz
-
-chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
-    k20x_clock_init(): called in __early_init() defined in board.c
-        disable watchdog and configure clock
-
-        configurable macros:
-        KINETIS_NO_INIT: whether init or not
-        KINETIS_MCG_MODE: clock mode   
-            KINETIS_MCG_MODE_FEI
-            KINETIS_MCG_MODE_PEE
-                hal/ports/KINETIS/K20x/hal_lld.h
-            
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
-    PALConfig pal_default_config
-    boardInit()
-    __early_init()
-    macro definitions for board infos, freq and mcu type
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
-
-USB
-
-
-Startup
--------
-    common/ports/ARMCMx/GCC/crt0_v[67]m.s
-        Reset_Handler: startup code
-    common/ports/ARMCMx/GCC/crt1.c
-        __core_init(): weak
-        __early_init(): weak
-        __late_init(): weak
-        __default_exit(): weak
-            called from Reset_Handler of crt0
-    common/ports/ARMCMx/GCC/vector.c
-    common/ports/ARMCMx/GCC/ld/*.ld
-
-chibios/os/common/ports/ARMCMx/compilers/GCC/
-├── crt0_v6m.s
-├── crt0_v7m.s
-├── crt1.c
-├── ld
-│   ├── MK20DX128BLDR3.ld
-│   ├── MK20DX128BLDR4.ld
-│   ├── MK20DX128.ld
-│   ├── MK20DX256.ld
-│   ├── MKL25Z128.ld
-│   ├── MKL26Z128.ld
-│   ├── MKL26Z64.ld
-│   └── STM32L476xG.ld
-├── mk
-│   ├── startup_k20x5.mk
-│   ├── startup_k20x7.mk
-│   ├── startup_k20x.mk
-│   ├── startup_kl2x.mk
-│   └── startup_stm32l4xx.mk
-├── rules.ld
-├── rules.mk
-└── vectors.c
-
-chibios/os/hal/
-├── boards
-│   ├── FREESCALE_FREEDOM_K20D50M
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── MCHCK_K20
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_3
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_3_1
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── PJRC_TEENSY_LC
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── readme.txt
-│   ├── simulator
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   └── board.mk
-│   ├── ST_NUCLEO_F030R8
-│   │   ├── board.c
-│   │   ├── board.h
-│   │   ├── board.mk
-│   │   └── cfg
-│   │       └── board.chcfg
-├── hal.mk
-├── include
-│   ├── adc.h
-│   ├── can.h
-│   ├── dac.h
-│   ├── ext.h
-│   ├── gpt.h
-│   ├── hal_channels.h
-│   ├── hal_files.h
-│   ├── hal.h
-│   ├── hal_ioblock.h
-│   ├── hal_mmcsd.h
-│   ├── hal_queues.h
-│   ├── hal_streams.h
-│   ├── i2c.h
-│   ├── i2s.h
-│   ├── icu.h
-│   ├── mac.h
-│   ├── mii.h
-│   ├── mmc_spi.h
-│   ├── pal.h
-│   ├── pwm.h
-│   ├── rtc.h
-│   ├── sdc.h
-│   ├── serial.h
-│   ├── serial_usb.h
-│   ├── spi.h
-│   ├── st.h
-│   ├── uart.h
-│   └── usb.h
-├── lib
-│   └── streams
-│       ├── chprintf.c
-│       ├── chprintf.h
-│       ├── memstreams.c
-│       ├── memstreams.h
-│       ├── nullstreams.c
-│       └── nullstreams.h
-├── osal
-│   ├── nil
-│   │   ├── osal.c
-│   │   ├── osal.h
-│   │   └── osal.mk
-│   ├── os-less
-│   │   └── ARMCMx
-│   │       ├── osal.c
-│   │       ├── osal.h
-│   │       └── osal.mk
-│   └── rt
-│       ├── osal.c
-│       ├── osal.h
-│       └── osal.mk
-├── ports
-│   ├── AVR
-│   ├── common
-│   │   └── ARMCMx
-│   │       ├── mpu.h
-│   │       ├── nvic.c
-│   │       └── nvic.h
-│   ├── KINETIS
-│   │   ├── K20x
-│   │   │   ├── hal_lld.c
-│   │   │   ├── hal_lld.h
-│   │   │   ├── kinetis_registry.h
-│   │   │   ├── platform.dox
-│   │   │   ├── platform.mk
-│   │   │   ├── pwm_lld.c
-│   │   │   ├── pwm_lld.h
-│   │   │   ├── spi_lld.c
-│   │   │   └── spi_lld.h
-│   │   ├── KL2x
-│   │   │   ├── hal_lld.c
-│   │   │   ├── hal_lld.h
-│   │   │   ├── kinetis_registry.h
-│   │   │   ├── platform.mk
-│   │   │   ├── pwm_lld.c
-│   │   │   └── pwm_lld.h
-│   │   ├── LLD
-│   │   │   ├── adc_lld.c
-│   │   │   ├── adc_lld.h
-│   │   │   ├── ext_lld.c
-│   │   │   ├── ext_lld.h
-│   │   │   ├── gpt_lld.c
-│   │   │   ├── gpt_lld.h
-│   │   │   ├── i2c_lld.c
-│   │   │   ├── i2c_lld.h
-│   │   │   ├── pal_lld.c
-│   │   │   ├── pal_lld.h
-│   │   │   ├── serial_lld.c
-│   │   │   ├── serial_lld.h
-│   │   │   ├── st_lld.c
-│   │   │   ├── st_lld.h
-│   │   │   ├── usb_lld.c
-│   │   │   └── usb_lld.h
-│   │   └── README.md
-│   ├── LPC
-│   ├── simulator
-│   └── STM32
-├── src
-│   ├── adc.c
-│   ├── can.c
-│   ├── dac.c
-│   ├── ext.c
-│   ├── gpt.c
-│   ├── hal.c
-│   ├── hal_mmcsd.c
-│   ├── hal_queues.c
-│   ├── i2c.c
-│   ├── i2s.c
-│   ├── icu.c
-│   ├── mac.c
-│   ├── mmc_spi.c
-│   ├── pal.c
-│   ├── pwm.c
-│   ├── rtc.c
-│   ├── sdc.c
-│   ├── serial.c
-│   ├── serial_usb.c
-│   ├── spi.c
-│   ├── st.c
-│   ├── uart.c
-│   └── usb.c
-└── templates
-    ├── adc_lld.c
-    ├── adc_lld.h
-    ├── can_lld.c
-    ├── can_lld.h
-    ├── dac_lld.c
-    ├── dac_lld.h
-    ├── ext_lld.c
-    ├── ext_lld.h
-    ├── gpt_lld.c
-    ├── gpt_lld.h
-    ├── halconf.h
-    ├── hal_lld.c
-    ├── hal_lld.h
-    ├── i2c_lld.c
-    ├── i2c_lld.h
-    ├── i2s_lld.c
-    ├── i2s_lld.h
-    ├── icu_lld.c
-    ├── icu_lld.h
-    ├── mac_lld.c
-    ├── mac_lld.h
-    ├── mcuconf.h
-    ├── osal
-    │   ├── osal.c
-    │   ├── osal.h
-    │   └── osal.mk
-    ├── pal_lld.c
-    ├── pal_lld.h
-    ├── platform.mk
-    ├── pwm_lld.c
-    ├── pwm_lld.h
-    ├── rtc_lld.c
-    ├── rtc_lld.h
-    ├── sdc_lld.c
-    ├── sdc_lld.h
-    ├── serial_lld.c
-    ├── serial_lld.h
-    ├── spi_lld.c
-    ├── spi_lld.h
-    ├── st_lld.c
-    ├── st_lld.h
-    ├── uart_lld.c
-    ├── uart_lld.h
-    ├── usb_lld.c
-    └── usb_lld.h
diff --git a/keyboards/infinity60/keymaps/jpetermans/Makefile b/keyboards/infinity60/keymaps/jpetermans/Makefile
index 225e4cad4..df3d1e952 100644
--- a/keyboards/infinity60/keymaps/jpetermans/Makefile
+++ b/keyboards/infinity60/keymaps/jpetermans/Makefile
@@ -1,5 +1,3 @@
-#BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-#BOOTMAGIC_ENABLE = yes
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c
index d6c2b7bb5..cc4633b1b 100644
--- a/keyboards/infinity60/keymaps/jpetermans/keymap.c
+++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c
@@ -11,6 +11,34 @@
 #define _MEDIA 3
 #define _TILDE 4
 
+//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles
+#define max_pages 6
+
+enum ic60_keycodes {
+  NUMPAD,
+  FNAV,
+  MEDIA,
+  TILDE,
+  CTLALTDEL,
+  BACKLIGHT,
+  BRIGHT,
+  DIM,
+  ALL,
+  GAME,
+  MODE_SINGLE,
+  MODE_PAGE,
+  MODE_FLASH
+};
+
+uint8_t current_layer_global = 0;
+uint8_t led_mode_global = MODE_SINGLE;
+uint8_t backlight_status_global = 1; //init on/off state of backlight
+uint32_t led_layer_state = 0;
+
+/* ==================================
+ *             KEYMAPS
+ * ==================================*/
+
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
      * ,-----------------------------------------------------------.
@@ -30,17 +58,8 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_NO,\
         KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,   \
         TT(_FNAV), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,         \
-        F(1),   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO,          \
-        KC_LCTL,   KC_LGUI,KC_LALT,               KC_SPC,          KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL         \
-    ),
-
-    /* F-, arrow, and media keys */
-    [_FNAV] = KEYMAP( \
-        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,KC_NO,\
-        KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL,  \
-        _______,M(0),KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______,     \
-        _______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO,         \
-        _______,_______,_______,               _______,             F(0),KC_NLCK,_______,_______   \
+        KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO,          \
+        KC_LCTL,   KC_LGUI,KC_LALT,            LT(_FNAV, KC_SPC),       KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL         \
     ),
 
     /* numpad */
@@ -49,15 +68,24 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
         MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______,      \
         _______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO,      \
-        _______,_______,_______,               MO(_BASE),           _______,_______,_______,_______   \
+        _______,_______,_______,               TO(_BASE),           _______,_______,_______,_______   \
+    ),
+
+    /* F-, arrow, and media keys */
+    [_FNAV] = KEYMAP( \
+        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,KC_NO,\
+        KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL,  \
+        _______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______,     \
+        _______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO,         \
+        _______,_______,_______,               _______,         F(CTLALTDEL),KC_NLCK,_______,_______   \
     ),
 
     /* media */
     [_MEDIA] = KEYMAP( \
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
-        _______,_______,_______,_______,_______,_______,_______, _______, KC_UP, _______,_______, _______,_______,_______,\
-        _______,_______,_______,_______,_______,_______,_______, KC_LEFT, KC_DOWN, KC_RGHT,_______, _______,_______,     \
-        _______,_______,F(2),F(3),_______,_______,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO,       \
+        _______,F(MODE_SINGLE),F(MODE_PAGE),F(MODE_FLASH),_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
+        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
+        _______,_______,_______,_______,_______,F(GAME),_______, _______, _______, _______,_______, _______,_______,     \
+        _______,_______,F(ALL) ,F(BRIGHT),F(DIM),F(BACKLIGHT),_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO,       \
         _______,_______,_______,               KC_MPLY,             _______,_______, _______,_______      \
     ),
     /* ~ */
@@ -85,58 +113,193 @@ enum function_id {
 
 enum macro_id {
     ACTION_LEDS_ALL,
-    ACTION_LEDS_GAME
+    ACTION_LEDS_GAME,
+    ACTION_LEDS_BACKLIGHT,
+    ACTION_LEDS_BRIGHT,
+    ACTION_LEDS_DIM,
+    ACTION_LEDS_SINGLE,
+    ACTION_LEDS_PAGE,
+    ACTION_LEDS_FLASH
+};
+
+/* ==================================
+ *          LED MAPPING
+ * ==================================*/
+
+/*
+    Infinity60 LED MAP
+    11 12 13 14 15 16 17 18 21 22 23 24 25  26 27*
+     28 31 32 33 34 35 36 37 38 41 42 43 44 45
+     46 47 48 51 52 53 54 55 56 57 58 61    62
+      63 64 65 66 67 68 71 72 73 74 75      76 77*
+    78  81  82       83         84  85  86  87
+    *Unused in Alphabet Layout
+*/
+
+//======== full page arrays =========
+//any change in array size needs to be mirrored in matrix_init_user
+uint8_t led_numpad[16] = {
+  18,21,22,23,
+  37,38,41,42,
+  55,56,57,58,
+  72,73,74,75
+};
+//LED Page 2 - _Nav
+uint8_t led_nav[12] = {
+                        38,
+  47,48,              55,56,57,
+     64,65,66
+};
+//LED Page 3 - _Media
+uint8_t led_media[15] = {
+  12,13,14,           23,24,25,
+     65,66,67,68,    73,74,75,
+           83,          86
+};
+//LED Page 4 - _Game "WASD"
+uint8_t led_game[5] = {
+  11,
+        32,
+     47,48,51
 };
 
+//======== qmk functions =========
 const uint16_t fn_actions[] = {
-    [0] = ACTION_KEY(LALT(LCTL(KC_DEL))),
-    [1] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
-    [2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
-    [3] = ACTION_FUNCTION(ACTION_LEDS_GAME)
+    [CTLALTDEL] = ACTION_KEY(LALT(LCTL(KC_DEL))),
+    [TILDE] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
+    [ALL] = ACTION_FUNCTION(ACTION_LEDS_ALL),
+    [GAME] = ACTION_FUNCTION(ACTION_LEDS_GAME),
+    [BACKLIGHT] = ACTION_FUNCTION(ACTION_LEDS_BACKLIGHT),
+    [BRIGHT] = ACTION_FUNCTION(ACTION_LEDS_BRIGHT),
+    [DIM] = ACTION_FUNCTION(ACTION_LEDS_DIM),
+    [MODE_SINGLE] = ACTION_FUNCTION(ACTION_LEDS_SINGLE),
+    [MODE_PAGE] = ACTION_FUNCTION(ACTION_LEDS_PAGE),
+    [MODE_FLASH] = ACTION_FUNCTION(ACTION_LEDS_FLASH),
 };
 
 /* custom action function */
 void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  (void)opt;
+  msg_t msg;
+
   switch(id) {
     case ACTION_LEDS_ALL:
-        if(record->event.pressed) {
-          // signal the LED controller thread
-          chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
-        }
+      if(record->event.pressed) {
+        led_mode_global = led_mode_global == ALL ? MODE_SINGLE : ALL;
+        msg=TOGGLE_ALL;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+      }
       break;
+
+    case ACTION_LEDS_BACKLIGHT:
+      if(record->event.pressed) {
+        backlight_status_global ^= 1;
+        msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+      }
+      break;
+
     case ACTION_LEDS_GAME:
       if(record->event.pressed) {
-        // signal the LED controller thread
-        chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
+        led_mode_global = led_mode_global == GAME ? MODE_SINGLE : GAME;
+
+        msg=(4 << 8) | DISPLAY_PAGE;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+      }
+      break;
+
+    case ACTION_LEDS_BRIGHT:
+      if(record->event.pressed) {
+        msg=(1 << 8) | STEP_BRIGHTNESS;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
       }
       break;
+
+    case ACTION_LEDS_DIM:
+      if(record->event.pressed) {
+        msg=(0 << 8) | STEP_BRIGHTNESS;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+      }
+      break;
+
+    //set led_mode for matrix_scan to toggle leds
+    case ACTION_LEDS_SINGLE:
+      led_mode_global = MODE_SINGLE;
+      break;
+    case ACTION_LEDS_PAGE:
+      led_mode_global = MODE_PAGE;
+      break;
+    case ACTION_LEDS_FLASH:
+      led_mode_global = MODE_FLASH;
+      break;
+
   }
 }
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-    switch(id) {
-        case 0: 
-            if (record->event.pressed) {
-            }
-            break;
-        case 1:
-            if (record->event.pressed) {
-            }
-            break;
-    }
     return MACRO_NONE;
 };
 
 
+bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
 // Runs just one time when the keyboard initializes.
 void matrix_init_user(void) {
+    xprintf("init start");
+
     led_controller_init();
+
+    // Write predefined led pages.
+    write_led_page(_NUMPAD, led_numpad, 16);
+    chThdSleepMilliseconds(10);
+
+    write_led_page(_FNAV, led_nav, 12);
+    chThdSleepMilliseconds(10);
+
+    write_led_page(_MEDIA, led_media, 15);
+    chThdSleepMilliseconds(10);
+
+    write_led_page(4, led_game, 5);
+    chThdSleepMilliseconds(1000);
 };
 
-// Runs constantly in the background, in a loop.
+// Loops constantly in the background.
 void matrix_scan_user(void) {
+  uint8_t page;
+  uint8_t led_pin_byte;
+  msg_t msg;
 
-};
+  if (backlight_status_global == 0) {//backlight is off, skip the rest
+    return;
+  }
+
+  if (led_layer_state != layer_state && led_mode_global != GAME && led_mode_global != ALL) {
+    //check mode
+    //Turn on layer indicator or page depending on mode
+    switch(led_mode_global) {
+      case MODE_FLASH: //flash preset page leds then single indicator
+        page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
+        msg=(page << 8) | DISPLAY_PAGE;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+        chThdSleepMilliseconds(500);
+        //flow to display single layer leds
+
+      case MODE_SINGLE: //light layer indicators for all active layers
+        led_pin_byte = layer_state & 0xFF;
+        msg=(7 << 8) | DISPLAY_PAGE;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+        msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+        break;
 
+      case MODE_PAGE: //display pre-defined led page
+        page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
+        msg=(page << 8) | DISPLAY_PAGE;
+        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+        break;
+      }
+  led_layer_state = layer_state;
+  }
+}
diff --git a/keyboards/infinity60/keymaps/jpetermans/readme.md b/keyboards/infinity60/keymaps/jpetermans/readme.md
new file mode 100644
index 000000000..b83057ea7
--- /dev/null
+++ b/keyboards/infinity60/keymaps/jpetermans/readme.md
@@ -0,0 +1,87 @@
+Backlight for Infinity60
+========================
+
+## Led Controller Specs
+
+The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A.
+
+Infinity60 LED Map:
+digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
+```c
+  11 12 13 14 15 16 17 18 21 22 23 24 25  26 27*
+   28 31 32 33 34 35 36 37 38 41 42 43 44 45
+   46 47 48 51 52 53 54 55 56 57 58 61    62
+   63 64 65 66 67 68 71 72 73 74 75      76 77*
+   78  81  82       83         84  85  86  87
+```
+*Unused in Alphabet Layout
+
+The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
+- **bytes 0 - 17** - LED control (on/off).
+    * 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
+    * Each byte controls the 8 leds on that pin with bits (8 to 1).
+- **bytes 8 - 35** - Blink control.
+    * Same as LED control above, but sets blink on/off.
+- **bytes 36 - 143** - PWM control.
+    * One byte per LED, sets PWM from 0 to 255.
+    * Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices.
+
+## Led Controller Code
+In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox).
+
+One function is available to directly set leds without the mailbox:
+```
+write_led_page(page#, array of leds by address, # of addresses in array)
+```
+This function saves a full page to the controller using a supplied array of led locations such as:
+```c
+uint8_t led_numpad[16] =  {
+  18,21,22,23,
+  37,38,41,42,
+  55,56,57,58,
+  72,73,74,75
+}
+write_led_page(5, led_numpad, 16);
+```
+
+Remaining led control is done through the led mailbox using these message types:
+- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
+- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
+- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
+- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
+- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display.
+- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page.
+- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page.
+- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly).
+- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock.
+- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness.
+
+## Sending messages in Keymap.c
+Sending an action to the led mailbox is done using chMBPost:
+```
+chMBPost(&led_mailbox, message, timeout);
+```
+- &led_mailbox - pointer to led mailbox
+- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process.
+- timeout is TIME_IMMEDIATE
+
+An example:
+```c
+//set the message to be sent. First byte (LSB) is the led address, and second is the message type
+msg=(42 << 8) | ON_LED;
+
+//send msg to the led mailbox
+chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+```
+
+Another:
+```c
+msg=(46 << 8) | BLINK_TOGGLE_LED;
+chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+```
+
+Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like:
+```c
+msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
+chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
+```
diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c
index e17a5dd0d..53147a78a 100644
--- a/keyboards/infinity60/led.c
+++ b/keyboards/infinity60/led.c
@@ -26,25 +26,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * In particular, I2C functions (interrupt-driven) should NOT be called from here.
  */
 void led_set(uint8_t usb_led) {
-/*
-    // PTA5: LED (1:on/0:off)
-    GPIOA->PDDR |= (1<<1);
-    PORTA->PCR[5] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        GPIOA->PSOR |= (1<<5);
+    msg_t msg;
+
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        chSysUnconditionalLock();
+        msg=(1 << 8) | TOGGLE_NUM_LOCK;
+        chMBPostI(&led_mailbox, msg);
+        chSysUnconditionalUnlock();
     } else {
-        GPIOA->PCOR |= (1<<5);
+        chSysUnconditionalLock();
+        msg=(0 << 8) | TOGGLE_NUM_LOCK;
+        chMBPostI(&led_mailbox, msg);
+        chSysUnconditionalUnlock();
     }
- */
     if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // signal the LED control thread
         chSysUnconditionalLock();
-        chMBPostI(&led_mailbox, LED_MSG_CAPS_ON);
+        msg=(1 << 8) | TOGGLE_CAPS_LOCK;
+        chMBPostI(&led_mailbox, msg);
         chSysUnconditionalUnlock();
     } else {
-        // signal the LED control thread
         chSysUnconditionalLock();
-        chMBPostI(&led_mailbox, LED_MSG_CAPS_OFF);
+        msg=(0 << 8) | TOGGLE_CAPS_LOCK;
+        chMBPostI(&led_mailbox, msg);
         chSysUnconditionalUnlock();
     }
 }
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index c5303a3e7..04793cc01 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -17,13 +17,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /*
  * LED controller code
- * WF uses IS31FL3731C matrix LED driver from ISSI
+ * IS31FL3731C matrix LED driver from ISSI
  * datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
  */
 
 #include "ch.h"
 #include "hal.h"
 #include "print.h"
+#include "led.h"
+#include "host.h"
 
 #include "led_controller.h"
 
@@ -53,11 +55,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
 */
 
-/* Which LED should be used for CAPS LOCK indicator
- * The usual Caps Lock position is C4-6, so the address is
- * 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
+// Which LED should be used for CAPS LOCK indicator
 #if !defined(CAPS_LOCK_LED_ADDRESS)
-#define CAPS_LOCK_LED_ADDRESS 0x59
+#define CAPS_LOCK_LED_ADDRESS 46
+#endif
+
+#if !defined(NUM_LOCK_LED_ADDRESS)
+#define NUM_LOCK_LED_ADDRESS 85
 #endif
 
 /* Which LED should breathe during sleep */
@@ -83,14 +87,22 @@ uint8_t rx[1] __attribute__((aligned(2)));
 uint8_t full_page[0xB4+1] = {0};
 
 // LED mask (which LEDs are present, selected by bits)
-// See page comment above, control alternates CA matrix/CB matrix
 // IC60 pcb uses only CA matrix.
-// Each byte is a control pin for 8 leds 8-1
-const uint8_t is31_ic60_leds_mask[0x12] = {
+// Each byte is a control pin for 8 leds ordered 8-1
+const uint8_t all_on_leds_mask[0x12] = {
   0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
   0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
 };
 
+// array to hold brightness pwm steps
+const uint8_t pwm_levels[5] = {
+    0x00, 0x16, 0x4E, 0xA1, 0xFF
+};
+
+// array to write to pwm register
+uint8_t pwm_register_array[9] = {0};
+
+
 /* ============================
  *   communication functions
  * ============================ */
@@ -112,8 +124,8 @@ msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
   return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
 }
 
-msg_t is31_read_register(uint8_t b, uint8_t reg, uint8_t *result) {
-  is31_select_page(b);
+msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
+  is31_select_page(page);
 
   tx[0] = reg;
   return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
@@ -127,16 +139,9 @@ void is31_init(void) {
   __builtin_memset(full_page,0,0xB4+1);
   // zero function page, all registers (assuming full_page is all zeroes)
   is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
-  // disable hardware shutdown
   palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
   palSetPad(GPIOB, 16);
   chThdSleepMilliseconds(10);
-  // software shutdown
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
-  chThdSleepMilliseconds(10);
-  // zero function page, all registers
-  is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
-  chThdSleepMilliseconds(10);
   // software shutdown disable (i.e. turn stuff on)
   is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
   chThdSleepMilliseconds(10);
@@ -144,7 +149,7 @@ void is31_init(void) {
   uint8_t i;
   for(i=0; i<8; i++) {
     is31_write_data(i, full_page, 0xB4 + 1);
-    chThdSleepMilliseconds(1);
+    chThdSleepMilliseconds(5);
   }
 }
 
@@ -159,134 +164,257 @@ static THD_FUNCTION(LEDthread, arg) {
   (void)arg;
   chRegSetThreadName("LEDthread");
 
-  uint8_t temp;
-  uint8_t save_page, save_breath1, save_breath2;
-  msg_t msg, retval;
+  uint8_t i;
+  uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
+  uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
+
+  //persistent status variables
+  uint8_t pwm_step_status, page_status;
+
+  //mailbox variables
+  uint8_t temp, msg_type;
+  uint8_t msg_args[3];
+  msg_t msg;
+
+  // initialize persistent variables
+  pwm_step_status = 4; //full brightness
+  page_status = 0; //start frame 0 (all off/on)
 
   while(true) {
     // wait for a message (asynchronous)
     // (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
-    //  be processed right away)
+    //  be processed right away
     chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
+    msg_type = msg & 0xFF; //first byte is action information
+    msg_args[0] = (msg >> 8) & 0xFF;
+    msg_args[1] = (msg >> 16) & 0XFF;
+    msg_args[2] = (msg >> 24) & 0xFF;
+
+    switch (msg_type){
+      case SET_FULL_ROW:
+      //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
+      //writes only to currently displayed page
+        write_led_byte(page_status, msg_args[1], msg_args[0]);
+        break;
 
-    // process 'msg' here
-    switch(msg) {
-      case LED_MSG_CAPS_ON:
-        // turn caps on on pages 1 and 2
-        is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0xFF);
-        is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0xFF);
-        is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0xFF);
+      case OFF_LED:
+      //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
         break;
-      case LED_MSG_CAPS_OFF:
-        // turn caps off on pages 1 and 2
-        is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0);
-        is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
-        is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
+      case ON_LED:
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
         break;
-      case LED_MSG_SLEEP_LED_ON:
-        // save current settings
-        is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
-        is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
-        is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
-        // use pages 7 and 8 for (hardware) breathing (assuming they're empty)
-        is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
-        is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
-        retval = MSG_TIMEOUT;
-        temp = 6;
-        while(retval == MSG_TIMEOUT) {
-          // switch to the other page
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
-          temp = (temp == 6 ? 7 : 6);
-          // the times should be sufficiently long for IS31 to finish switching pages
-          retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
-        }
-        // received a message (should be a wakeup), so restore previous state
-        chThdSleepMilliseconds(3000); // need to wait until the page change finishes
-        // note: any other messages are queued
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
+      case TOGGLE_LED:
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
         break;
-      case LED_MSG_SLEEP_LED_OFF:
-        // should not get here; wakeup should be received in the branch above
+
+      case BLINK_OFF_LED:
+      //on/off/toggle single led, msg_args[0] = row/col of led
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
         break;
-      case LED_MSG_ALL_TOGGLE:
-        // read current page into 'temp'
-        is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
-        chThdSleepMilliseconds(1);
-        // switch to 'the other' page
-        if(temp==2) {
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+      case BLINK_ON_LED:
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
+        break;
+      case BLINK_TOGGLE_LED:
+        set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
+        break;
+
+      case TOGGLE_ALL:
+      //turn on/off all leds, msg_args = unused
+        is31_read_register(0, 0x00, &temp);
+        led_control_reg[0] = 0;
+
+        //if first leds are already on, toggle frame 0 off
+        if (temp==0 || page_status > 0) {
+          __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
         } else {
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 2);
+          __builtin_memset(led_control_reg+1, 0, 0x12);
         }
-        break;
-      case LED_MSG_GAME_TOGGLE:
-        // read current page into 'temp'
-        is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
-        chThdSleepMilliseconds(1);
-        // switch to 'the other' page
-        if(temp==1) {
+        is31_write_data(0, led_control_reg, 0x13);
+
+        if (page_status > 0) {
           is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+
+          page_status=0;
+
+          //maintain lock leds
+          led_set(host_keyboard_leds());
+        }
+        break;
+
+      case TOGGLE_BACKLIGHT:
+        //msg_args[0] = on/off
+
+        //populate 9 byte rows to be written to each pin, first byte is register (pin) address
+        if (msg_args[0] == 1) {
+          __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
         } else {
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
+          __builtin_memset(pwm_register_array+1, 0, 8);
+        }
+
+        for(i=0; i<8; i++) {
+        //first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
+          pwm_register_array[0] = 0x24 + (i * 0x10);
+          is31_write_data(0,pwm_register_array,9);
+        }
+        break;
+
+      case DISPLAY_PAGE:
+      //msg_args[0] = page to toggle on
+        if (page_status != msg_args[0]) {
+          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
+          page_status = msg_args[0];
+
+          //maintain lock leds
+          led_set(host_keyboard_leds());
+        }
+        break;
+
+      case RESET_PAGE:
+      //led_args[0] = page to reset
+        led_control_reg[0] = 0;
+        __builtin_memset(led_control_reg+1, 0, 0x12);
+        is31_write_data(msg_args[0], led_control_reg, 0x13);
+
+        //repeat for blink register
+        led_control_reg[0] = 0x12;
+        is31_write_data(msg_args[0], led_control_reg, 0x13);
+        break;
+
+      case TOGGLE_NUM_LOCK:
+      //msg_args[0] = 0 or 1, off/on
+        set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
+        break;
+      case TOGGLE_CAPS_LOCK:
+      //msg_args[0] = 0 or 1, off/on
+        set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
+        break;
+
+      case STEP_BRIGHTNESS:
+      //led_args[0] = step up (1) or down (0)
+        switch (msg_args[0]) {
+          case 0:
+            if (pwm_step_status == 0) {
+              pwm_step_status = 4;
+            } else {
+              pwm_step_status--;
+            }
+            break;
+
+          case 1:
+            if (pwm_step_status == 4) {
+              pwm_step_status = 0;
+            } else {
+              pwm_step_status++;
+            }
+            break;
+        }
+
+        //populate 8 byte arrays to write on each pin
+        //first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
+        __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
+
+        for(i=0; i<8; i++) {
+          pwm_register_array[0] = 0x24 + (i * 0x10);
+          is31_write_data(0,pwm_register_array,9);
         }
         break;
     }
   }
 }
 
-//These relate to the LED map above, row and column
-//0x24 = first byte (CA1) of PWM page, 0x34 is 17th byte (CA2)
-/* LED game mode */
-const uint8_t led_game[72] = {
-  0x24,
-  0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x34,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x44,
-  0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x54,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
-  0x64,
-  0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x74,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x84,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x94,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+/* ==============================
+ *    led processing functions
+ * ============================== */
 
-/* ALL LEDs */
-const uint8_t led_all[72] = {
-  0x24,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x34,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0x44,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x54,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x64,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x74,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x84,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-  0x94,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-};
+void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
+  //returns 2 bytes: led control register address and byte to write
+  //action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
+
+  uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
+
+  //check for valid led address
+  if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
+    return;
+  }
+
+  blink_bit = action>>2;//check for blink bit
+  action &= ~(1<<2); //strip blink bit
+
+  //led_addr tens column is pin#, ones column is bit position in 8-bit mask
+  control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
+  control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
+
+  is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
+  column_bit = 1<<(led_addr % 10 - 1);
+  column_byte = temp;
+
+  switch(action) {
+    case 0:
+      column_byte &= ~column_bit;
+      break;
+    case 1:
+      column_byte |= column_bit;
+      break;
+    case 2:
+      column_byte ^= column_bit;
+      break;
+  }
+
+  //return word to be written in register
+  led_control_word[0] = control_reg_addr;
+  led_control_word[1] = column_byte;
+  is31_write_data (page, led_control_word, 0x02);
+}
+
+void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
+  uint8_t led_control_word[2] = {0};//register address and on/off byte
+
+  led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
+  led_control_word[1] = led_byte;
+  is31_write_data(page, led_control_word, 0x02);
+}
+
+void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
+  uint8_t i;
+  uint8_t pin, col;
+  uint8_t led_control_register[0x13] = {0};
+
+  __builtin_memset(led_control_register,0,13);
 
-/* =============
- * hook into TMK
- * ============= */
+  for(i=0;i<led_count;i++){
+    //shift pin by 1 for led register 0x00 address
+    pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
+    col = user_led_array[i] % 10 - 1;
+    led_control_register[pin] |= 1<<(col);
+  }
+
+  is31_write_data(page, led_control_register, 0x13);
+}
+
+void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
+  uint8_t temp;
+  uint8_t led_control_word[2] = {0};
+
+  //blink if all leds are on
+  if (page == 0) {
+    is31_read_register(0, 0x00, &temp);
+    chThdSleepMilliseconds(10);
+
+    if (temp == 0xFF) {
+      led_action |= (1<<2); //set blink bit
+    }
+  }
+
+  set_led_bit(page,led_control_word,led_addr,led_action);
+}
+
+/* =====================
+ * hook into user keymap
+ * ===================== */
 void led_controller_init(void) {
   uint8_t i;
 
-  xprintf("led_controller_init");
   /* initialise I2C */
   /* I2C pins */
   palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
@@ -303,11 +431,17 @@ void led_controller_init(void) {
   /* initialise IS31 chip */
   is31_init();
 
-  /* enable LEDs on all pages */
-  full_page[0] = 0;
-  __builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
+  //set Display Option Register so all pwm intensity is controlled from page 0
+  //enable blink and set blink period to 0.27s x rate
+  is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
+
+  /* set full pwm on page 1 */
+  pwm_register_array[0] = 0;
+  __builtin_memset(pwm_register_array+1, 0xFF, 8);
   for(i=0; i<8; i++) {
-    is31_write_data(i, full_page, 1+0x12);
+    pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
+    is31_write_data(0, pwm_register_array, 9);
+    chThdSleepMilliseconds(5);
   }
 
   /* enable breathing when the displayed page changes */
@@ -315,47 +449,8 @@ void led_controller_init(void) {
   is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
   is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
 
-  /* Write pages */
-  for(i=0; i<8; i++) {
-    is31_write_data(1,(uint8_t *)(led_game+(9*i)),9);
-    chThdSleepMilliseconds(5);
-    is31_write_data(2,(uint8_t *)(led_all+(9*i)),9);
-    chThdSleepMilliseconds(5);
-  }
-
-  // clean up the capslock LED
-  is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
-  is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
-
   /* more time consuming LED processing should be offloaded into
    * a thread, with asynchronous messaging. */
   chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
   chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
 }
-
-//TODO: Don't know equivalent QMK hooks for these
-//
-//void hook_usb_suspend_entry(void) {
-//#ifdef SLEEP_LED_ENABLE
-//  chSysLockFromISR();
-//  chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
-//  chSysUnlockFromISR();
-//#endif /* SLEEP_LED_ENABLE */
-//}
-//
-//void hook_usb_suspend_loop(void) {
-//  chThdSleepMilliseconds(100);
-//  /* Remote wakeup */
-//  if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
-//    send_remote_wakeup(&USB_DRIVER);
-//  }
-//}
-//
-//void hook_usb_wakeup(void) {
-//#ifdef SLEEP_LED_ENABLE
-//  chSysLockFromISR();
-//  chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
-//  chSysUnlockFromISR();
-//#endif /* SLEEP_LED_ENABLE */
-//}
-//*/
diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h
index 7db02389f..457b21a92 100644
--- a/keyboards/infinity60/led_controller.h
+++ b/keyboards/infinity60/led_controller.h
@@ -26,12 +26,15 @@ msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
 msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
 msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
 
-/* =========================
- *  init functions
- * ========================= */
+/* ============================
+ *  init functions/definitions
+ * ============================*/
 
 void led_controller_init(void);
 
+#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
+#define NUM_LOCK_LED_ADDRESS 85
+
 /* =============================
  * IS31 chip related definitions
  * ============================= */
@@ -55,7 +58,7 @@ void led_controller_init(void);
 
 #define IS31_REG_DISPLAYOPT 0x05
 #define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
 // D2:D0 bits blink period time (*0.27s)
 
 #define IS31_REG_AUDIOSYNC 0x06
@@ -82,20 +85,35 @@ void led_controller_init(void);
 
 #define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
 
-/* ==============================
- * LED Thread related definitions
- * ============================== */
+/* ========================================
+ * LED Thread related items
+ * ========================================*/
 
 extern mailbox_t led_mailbox;
 
+void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
+void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
+void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
+void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
+
 // constants for signaling the LED controller thread
 enum led_msg_t {
-    LED_MSG_CAPS_ON,
-    LED_MSG_CAPS_OFF,
-    LED_MSG_SLEEP_LED_ON,
-    LED_MSG_SLEEP_LED_OFF,
-    LED_MSG_ALL_TOGGLE,
-    LED_MSG_GAME_TOGGLE
+    KEY_LIGHT,
+    SET_FULL_ROW,
+    OFF_LED,
+    ON_LED,
+    TOGGLE_LED,
+    BLINK_OFF_LED,
+    BLINK_ON_LED,
+    BLINK_TOGGLE_LED,
+    TOGGLE_ALL,
+    TOGGLE_BACKLIGHT,
+    DISPLAY_PAGE,
+    RESET_PAGE,
+    TOGGLE_NUM_LOCK,
+    TOGGLE_CAPS_LOCK,
+    TOGGLE_BREATH,
+    STEP_BRIGHTNESS
 };
 
 #endif /* _LED_CONTROLLER_H_ */