Keyboard: add tokyo60 (#2861)

* adding tokyo60 to qmk

* updating readme

* updating keymap and power consumption for mobile

7 files changed, 253 insertions, 0 deletions

diff --git a/keyboards/tokyo60/config.h b/keyboards/tokyo60/config.h
new file mode 100644
index 000000000..6e6ab2215
--- /dev/null
+++ b/keyboards/tokyo60/config.h
@@ -0,0 +1,66 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Tokyo Keyboard
+#define PRODUCT         tokyo60
+#define DESCRIPTION     q.m.k. keyboard firmware for tokyo60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 6
+//#define BACKLIGHT_ON_STATE 1
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Set power consumption to work with mobile devices */
+#define USB_MAX_POWER_CONSUMPTION 100
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B2, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F7
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 10
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 12
+#endif
+
+/* For Production */
+#define QMK_ESC_OUTPUT F0 // usually COL
+#define QMK_ESC_INPUT D0 // usually ROW
+
+#endif
diff --git a/keyboards/tokyo60/keymaps/default/config.h b/keyboards/tokyo60/keymaps/default/config.h
new file mode 100644
index 000000000..a5568e400
--- /dev/null
+++ b/keyboards/tokyo60/keymaps/default/config.h
@@ -0,0 +1 @@
+#include "../../config.h"
diff --git a/keyboards/tokyo60/keymaps/default/keymap.c b/keyboards/tokyo60/keymaps/default/keymap.c
new file mode 100644
index 000000000..64b49a746
--- /dev/null
+++ b/keyboards/tokyo60/keymaps/default/keymap.c
@@ -0,0 +1,56 @@
+#include "tokyo60.h"
+
+/*
+ * Default HHKB Layout
+ */
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: Default layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Esc │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ Tab │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │BkSpc│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Ctrl │  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │ Fn3 │  '  │█████│Enter│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Shift│█████│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │█████│Shift│ Fn  │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│█████│ Gui │ Alt │█████│█████│Space│█████│█████│█████│█████│█████│ Alt │ Gui │█████│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    TOKYO_KEYMAP(
+        KC_ESC,    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSLS, KC_GRV, \
+        KC_TAB,    KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSPC,      \
+        KC_LCTL,   KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,       KC_ENT,      \
+        KC_LSFT,            KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M, KC_COMM,  KC_DOT, KC_SLSH,      KC_RSFT, KC_FN0, \
+             KC_LALT, KC_LGUI,              KC_SPC,                         KC_RGUI, KC_RALT ),
+    /* 1: HHKB Fn layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ Pwr │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ Ins │ Del │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│Caps │ RGB │RGBfw│RGBrv│BLtog│BLstp│     │     │ Psc │ Slk │ Pus │ Up  │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │ VoD │ VoU │ Mut │ Ejc │     │NP_* │NP_/ │Home │PgUp │Left │Right│█████│NPEnt│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │█████│     │     │     │     │     │NP_+ │NP_- │ End │PgDwn│Down │█████│     │     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│█████│     │     │█████│█████│█████│     │█████│█████│█████│█████│     │     │█████│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+     */
+    TOKYO_KEYMAP(
+       KC_PWR,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL, \
+       KC_CAPS, RGB_TOG, RGB_MOD, RGB_RMOD, BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,   KC_UP, KC_TRNS, KC_TRNS,  \
+       KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,       KC_PENT,       \
+       KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS,  KC_END, KC_PGDN, KC_DOWN,       KC_TRNS, KC_TRNS, \
+             KC_TRNS, KC_TRNS,                   KC_TRNS,                         KC_TRNS, KC_TRNS ),
+};
+
+/*5
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+};
+
+void matrix_scan_user(void) {
+
+};
diff --git a/keyboards/tokyo60/readme.md b/keyboards/tokyo60/readme.md
new file mode 100644
index 000000000..811d0707c
--- /dev/null
+++ b/keyboards/tokyo60/readme.md
@@ -0,0 +1,15 @@
+# tokyo60
+​
+![tokyo60](http://tokyokeyboard.com/wp-content/uploads/2018/02/AI7B4543_copy_page_20180215141449-1200x800.jpg)
+​
+Minimal hacker style mechanical keyboard designed in Tokyo. Full aluminum hi-pro construction with integrated top-plate. Cherry MX compatible. [More Info at Tokyo Keyboard](http://tokyokeyboard.com).
+​
+Keyboard Maintainer: [tokyo keyboard](http://tokyokeyboard.com)  
+Hardware Supported: tokyo60 rev1  
+Hardware Availability: [tokyo keyboard](http://tokyokeyboard.com), [Massdrop](https://www.massdrop.com/buy/massdrop-x-tokyo-keyboard-tokyo60-keyboard-kit?mode=guest_open)
+​
+Make example for this keyboard (after setting up your build environment):
+​
+    make tokyo60:default
+​
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/tokyo60/rules.mk b/keyboards/tokyo60/rules.mk
new file mode 100644
index 000000000..7f8cfc0a8
--- /dev/null
+++ b/keyboards/tokyo60/rules.mk
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes      # Enable RGB light
diff --git a/keyboards/tokyo60/tokyo60.c b/keyboards/tokyo60/tokyo60.c
new file mode 100644
index 000000000..d3b6279df
--- /dev/null
+++ b/keyboards/tokyo60/tokyo60.c
@@ -0,0 +1,19 @@
+#include "tokyo60.h"
+//#include "led.h"
+
+void matrix_init_kb(void) {
+  // Keyboard start-up code goes here
+  // Runs once when the firmware starts up
+  matrix_init_user();
+  led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+};
+
+void led_init_ports(void) {
+  /* LEDs on */
+}
diff --git a/keyboards/tokyo60/tokyo60.h b/keyboards/tokyo60/tokyo60.h
new file mode 100644
index 000000000..e3cfa711b
--- /dev/null
+++ b/keyboards/tokyo60/tokyo60.h
@@ -0,0 +1,21 @@
+#ifndef TOKYO60_H
+#define TOKYO60_H
+
+#include "quantum.h"
+
+/* tokyo60 Keymap*/
+#define TOKYO_KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K3D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C, K4D, \
+         K42, K43,           K46,                          K4B, K4C       \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
+    { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { KC_NO, K42, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, K4D }  \
+}
+
+#endif