1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32F1xx/hal_lld.c
* @brief STM32F1xx HAL subsystem low level driver source.
*
* @addtogroup HAL
* @{
*/
#include "ch.h"
#include "hal.h"
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level HAL driver initialization.
*
* @notapi
*/
void hal_lld_init(void) {
/* Reset of all peripherals.*/
rccResetAPB1(0xFFFFFFFF);
rccResetAPB2(0xFFFFFFFF);
/* SysTick initialization using the system clock.*/
SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
SysTick->VAL = 0;
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk |
SysTick_CTRL_TICKINT_Msk;
/* DWT cycle counter enable.*/
DWT_CTRL |= DWT_CTRL_CYCCNTENA;
#if defined(STM32_DMA_REQUIRED)
dmaInit();
#endif
/* Programmable voltage detector enable.*/
#if STM32_PVD_ENABLE
rccEnablePWRInterface(FALSE);
PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
#endif /* STM32_PVD_ENABLE */
}
/**
* @brief STM32 clocks and PLL initialization.
* @note All the involved constants come from the file @p board.h.
* @note This function should be invoked just after the system reset.
*
* @special
*/
#if defined(STM32F10X_LD) || defined(STM32F10X_LD_VL) || \
defined(STM32F10X_MD) || defined(STM32F10X_MD_VL) || \
defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
defined(__DOXYGEN__)
/*
* Clocks initialization for all sub-families except CL.
*/
void stm32_clock_init(void) {
#if !STM32_NO_INIT
/* HSI setup, it enforces the reset situation in order to handle possible
problems with JTAG probes and re-initializations.*/
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
while (!(RCC->CR & RCC_CR_HSIRDY))
; /* Wait until HSI is stable. */
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
RCC->CFGR = 0; /* CFGR reset value. */
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
; /* Waits until HSI is selected. */
#if STM32_HSE_ENABLED
/* HSE activation.*/
RCC->CR |= RCC_CR_HSEON;
while (!(RCC->CR & RCC_CR_HSERDY))
; /* Waits until HSE is stable. */
#endif
#if STM32_LSI_ENABLED
/* LSI activation.*/
RCC->CSR |= RCC_CSR_LSION;
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
; /* Waits until LSI is stable. */
#endif
#if STM32_LSE_ENABLED
/* LSE activation, have to unlock the register.*/
PWR->CR |= PWR_CR_DBP;
RCC->BDCR |= RCC_BDCR_LSEON;
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
; /* Waits until LSE is stable. */
PWR->CR &= ~PWR_CR_DBP;
#endif
#if STM32_ACTIVATE_PLL
/* PLL activation.*/
RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC;
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR & RCC_CR_PLLRDY))
; /* Waits until PLL is stable. */
#endif
/* Clock settings.*/
#if STM32_HAS_USB
RCC->CFGR = STM32_MCOSEL | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE |
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
STM32_HPRE;
#else
RCC->CFGR = STM32_MCOSEL | STM32_PLLMUL | STM32_PLLXTPRE |
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
STM32_HPRE;
#endif
/* Flash setup and final clock selection. */
FLASH->ACR = STM32_FLASHBITS;
/* Switching to the configured clock source if it is different from HSI.*/
#if (STM32_SW != STM32_SW_HSI)
/* Switches clock source.*/
RCC->CFGR |= STM32_SW;
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
; /* Waits selection complete. */
#endif
#endif /* !STM32_NO_INIT */
}
#elif defined(STM32F10X_CL)
/*
* Clocks initialization for the CL sub-family.
*/
void stm32_clock_init(void) {
#if !STM32_NO_INIT
/* HSI setup.*/
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
while (!(RCC->CR & RCC_CR_HSIRDY))
; /* Wait until HSI is stable. */
RCC->CFGR = 0;
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
; /* Wait until HSI is the source.*/
#if STM32_HSE_ENABLED
/* HSE activation.*/
RCC->CR |= RCC_CR_HSEON;
while (!(RCC->CR & RCC_CR_HSERDY))
; /* Waits until HSE is stable. */
#endif
#if STM32_LSI_ENABLED
/* LSI activation.*/
RCC->CSR |= RCC_CSR_LSION;
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
; /* Waits until LSI is stable. */
#endif
#if STM32_LSE_ENABLED
/* LSE activation, have to unlock the register.*/
PWR->CR |= PWR_CR_DBP;
RCC->BDCR |= RCC_BDCR_LSEON;
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
; /* Waits until LSE is stable. */
PWR->CR &= ~PWR_CR_DBP;
#endif
/* Settings of various dividers and multipliers in CFGR2.*/
RCC->CFGR2 = STM32_PLL3MUL | STM32_PLL2MUL | STM32_PREDIV2 |
STM32_PREDIV1 | STM32_PREDIV1SRC;
/* PLL2 setup, if activated.*/
#if STM32_ACTIVATE_PLL2
RCC->CR |= RCC_CR_PLL2ON;
while (!(RCC->CR & RCC_CR_PLL2RDY))
; /* Waits until PLL2 is stable. */
#endif
/* PLL3 setup, if activated.*/
#if STM32_ACTIVATE_PLL3
RCC->CR |= RCC_CR_PLL3ON;
while (!(RCC->CR & RCC_CR_PLL3RDY))
; /* Waits until PLL3 is stable. */
#endif
/* PLL1 setup, if activated.*/
#if STM32_ACTIVATE_PLL1
RCC->CFGR |= STM32_PLLMUL | STM32_PLLSRC;
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR & RCC_CR_PLLRDY))
; /* Waits until PLL1 is stable. */
#endif
/* Clock settings.*/
#if STM32_HAS_OTG1
RCC->CFGR = STM32_MCOSEL | STM32_OTGFSPRE | STM32_PLLMUL | STM32_PLLSRC |
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
#else
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLSRC |
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
#endif
/* Flash setup and final clock selection. */
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
/* Switching to the configured clock source if it is different from HSI.*/
#if (STM32_SW != STM32_SW_HSI)
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
;
#endif
#endif /* !STM32_NO_INIT */
}
#else
void stm32_clock_init(void) {}
#endif
/** @} */
|
