1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/hal_lld.c
* @brief STM32 HAL subsystem low level driver source.
*
* @addtogroup STM32_HAL
* @{
*/
#include "ch.h"
#include "hal.h"
#define AIRCR_VECTKEY 0x05FA0000
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
*/
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
#if !defined(STM32F10X_LD)
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
#endif
#if defined(STM32F10X_HD)
{VAL_GPIOFODR, VAL_GPIOFCRL, VAL_GPIOFCRH},
{VAL_GPIOGODR, VAL_GPIOGCRL, VAL_GPIOGCRH},
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level HAL driver initialization.
*/
void hal_lld_init(void) {
/* SysTick initialization using the system clock.*/
SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
SysTick->VAL = 0;
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk |
SysTick_CTRL_TICKINT_Msk;
#if CH_HAL_USE_ADC || CH_HAL_USE_SPI
dmaInit();
#endif
}
/**
* @brief STM32 clocks and PLL initialization.
* @note All the involved constants come from the file @p board.h.
*/
#if defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
defined(STM32F10X_HD) || defined(__DOXYGEN__)
/*
* Clocks initialization for the LD, MD and HD sub-families.
*/
void stm32_clock_init(void) {
/* HSI setup, it enforces the reset situation in order to handle possible
problems with JTAG probes and re-initializations.*/
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
while (!(RCC->CR & RCC_CR_HSIRDY))
; /* Wait until HSI is stable. */
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
RCC->CFGR = 0; /* CFGR reset value. */
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
; /* Wait until HSI is the source.*/
/* HSE setup, it is only performed if the HSE clock is selected as source
of the system clock (directly or through the PLL).*/
#if (STM32_SW == STM32_SW_HSE) || \
((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE))
RCC->CR |= RCC_CR_HSEON;
while (!(RCC->CR & RCC_CR_HSERDY))
; /* Waits until HSE is stable. */
#endif
/* PLL setup, it is only performed if the PLL is the selected source of
the system clock else it is left disabled.*/
#if STM32_SW == STM32_SW_PLL
RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC;
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR & RCC_CR_PLLRDY))
; /* Waits until PLL is stable. */
#endif
/* Clock settings.*/
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC |
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
/* Flash setup and final clock selection. */
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
/* Switching on the configured clock source if it is different from HSI.*/
#if (STM32_SW != STM32_SW_HSI)
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
;
#endif
}
#elif defined(STM32F10X_CL)
/*
* Clocks initialization for the CL sub-family.
*/
void stm32_clock_init(void) {
/* HSI setup, it enforces the reset situation in order to handle possible
problems with JTAG probes and re-initializations.*/
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
while (!(RCC->CR & RCC_CR_HSIRDY))
; /* Wait until HSI is stable. */
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
RCC->CFGR = 0; /* CFGR reset value. */
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
; /* Wait until HSI is the source.*/
RCC->CFGR2 = 0;
/* HSE setup, it is only performed if the HSE clock is selected as source
of the system clock (directly or through the PLLs).*/
#if (STM32_SW == STM32_SW_HSE) || \
((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_PREDIV1))
RCC->CR |= RCC_CR_HSEON;
while (!(RCC->CR & RCC_CR_HSERDY))
; /* Waits until HSE is stable. */
#endif
/* PLL2 setup, it is only performed if the PLL2 clock is selected as source
for the PLL clock else it is left disabled.*/
#if STM32_SW == STM32_SW_PLL
#if STM32_PREDIV1SRC == STM32_PREDIV1SRC_PLL2
RCC->CFGR2 |= STM32_PREDIV2 | STM32_PLL2MUL;
RCC->CR |= RCC_CR_PLL2ON;
while (!(RCC->CR & RCC_CR_PLL2RDY))
; /* Waits until PLL is stable. */
#endif
/* PLL setup, it is only performed if the PLL is the selected source of
the system clock else it is left disabled.*/
RCC->CFGR2 |= STM32_PREDIV1 | STM32_PREDIV1SRC;
RCC->CFGR |= STM32_PLLMUL | STM32_PLLSRC;
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR & RCC_CR_PLLRDY))
; /* Waits until PLL2 is stable. */
#endif
/* Clock settings.*/
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLSRC |
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
/* Flash setup and final clock selection. */
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
/* Switching on the configured clock source if it is different from HSI.*/
#if (STM32_SW != STM32_SW_HSI)
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
;
#endif
}
#else
void stm32_clock_init(void) {}
#endif
/** @} */
|
