blob: 5a024fff84f3646d273466fb77412e215cb12b72 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
/*
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file LPC214x/pal_lld.c
* @brief LPC214x FIO low level driver code
* @addtogroup LPC214x_PAL
* @{
*/
#include "ch.h"
#include "hal.h"
/**
* @brief LPC214x I/O ports configuration.
* @details FIO units and PINSEL registers initialization.
*
* @param[in] config the LPC214x ports configuration
*/
void _pal_lld_init(const LPC214xFIOConfig *config) {
/* Enables the access through the fast registers.*/
SCS = 3;
/* I/O pads initial assignment, device drivers may change this setup at a
* later time.*/
PINSEL0 = config->pinsel0;
PINSEL1 = config->pinsel1;
PINSEL2 = config->pinsel2;
/* I/O pads direction initial setting.*/
FIO0Base->FIO_MASK = 0;
FIO0Base->FIO_PIN = config->P0Data.pin;
FIO0Base->FIO_DIR = config->P0Data.dir;
FIO1Base->FIO_MASK = 0;
FIO1Base->FIO_PIN = config->P1Data.pin;
FIO1Base->FIO_DIR = config->P1Data.dir;
}
/**
* @brief Pads mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port the port identifier
* @param[in] mask the group mask
* @param[in] mode the mode
*
* @note This function is not meant to be invoked directly by the application
* code.
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output with high
* state.
* @note This function does not alter the @p PINSELx registers. Alternate
* functions setup must be handled by device-specific code.
*/
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
uint_fast8_t mode) {
switch (mode) {
case PAL_MODE_RESET:
case PAL_MODE_INPUT:
port->FIO_DIR &= ~mask;
break;
case PAL_MODE_UNCONNECTED:
port->FIO_PIN |= mask;
case PAL_MODE_OUTPUT_PUSHPULL:
port->FIO_DIR |= mask;
break;
}
}
/** @} */
|
