1 files changed, 104 insertions, 0 deletions
diff --git a/testhal/STM32/multi/WSPI-MFS/main.c b/testhal/STM32/multi/WSPI-MFS/main.c
new file mode 100644
index 000000000..3de5be345
--- /dev/null
+++ b/testhal/STM32/multi/WSPI-MFS/main.c
@@ -0,0 +1,104 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+
+#include "serial_nor.h"
+#include "mfs.h"
+
+#include "mfs_test_root.h"
+
+#include "portab.h"
+
+/* 16MB device, 2 cycles delay after NCS.*/
+const WSPIConfig WSPIcfg1 = {
+  .end_cb           = NULL,
+  .dcr              = STM32_DCR_FSIZE(24) | STM32_DCR_CSHT(1)
+};
+
+const SNORConfig snorcfg1 = {
+  .busp             = &WSPID1,
+  .buscfg           = &WSPIcfg1
+};
+
+SNORDriver snor1;
+
+const MFSConfig mfscfg1 = {
+  .flashp           = (BaseFlash *)&snor1,
+  .erased           = 0xFFFFFFFFU,
+  .bank_size        = 4096U,
+  .bank0_start      = 0U,
+  .bank0_sectors    = 1U,
+  .bank1_start      = 1U,
+  .bank1_sectors    = 1U
+};
+
+/*
+ * LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palToggleLine(PORTAB_LINE_LED1);
+    chThdSleepMilliseconds(500);
+    palToggleLine(PORTAB_LINE_LED1);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*Board-dependent GPIO setup code.*/
+  portab_setup();
+
+  /* Starting a serial port for test report output.*/
+  sdStart(&PORTAB_SD1, NULL);
+
+  /* Initializing and starting snor1 driver.*/
+  snorObjectInit(&snor1);
+  snorStart(&snor1, &snorcfg1);
+
+  /* Creates the blinker thread.*/
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /* Normal main() thread activity, in this demo it does nothing.*/
+  while (true) {
+    if (palReadLine(PORTAB_LINE_BUTTON) == PORTAB_BUTTON_PRESSED) {
+      test_execute((BaseSequentialStream *)&PORTAB_SD1, &mfs_test_suite);
+    }
+    chThdSleepMilliseconds(500);
+  }
+  return 0;
+}