diff options
Diffstat (limited to 'testhal/STM32/STM32F30x/IRQ_STORM/readme.txt')
-rw-r--r-- | testhal/STM32/STM32F30x/IRQ_STORM/readme.txt | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt b/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt new file mode 100644 index 000000000..5193c5f89 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt @@ -0,0 +1,32 @@ +*****************************************************************************
+** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F30x. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STMicroelectronics STM32F3-Discovery board.
+
+** The Demo **
+
+The application demonstrates the use of the STM32F30x GPT, PAL and Serial
+drivers in order to implement a system stress demo.
+
+** Board Setup **
+
+- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
+- Connect a terminal emulator to the transceiver (38400-N-8-1).
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
|