diff options
Diffstat (limited to 'testhal/SPC564Axx')
| -rw-r--r-- | testhal/SPC564Axx/SPI/.cproject | 51 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/.project | 38 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/Makefile | 168 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/chconf.h | 531 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/halconf.h | 312 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/main.c | 158 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/mcuconf.h | 127 | ||||
| -rw-r--r-- | testhal/SPC564Axx/SPI/readme.txt | 25 |
8 files changed, 1410 insertions, 0 deletions
diff --git a/testhal/SPC564Axx/SPI/.cproject b/testhal/SPC564Axx/SPI/.cproject new file mode 100644 index 000000000..a4ae17c6d --- /dev/null +++ b/testhal/SPC564Axx/SPI/.cproject @@ -0,0 +1,51 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.861226640">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.861226640" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.861226640" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.861226640." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1002748249" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1002748249.660222523" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.662368067" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.1194892762" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1089722463" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1861343146" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1644189815" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1045400342" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1188847444" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.263638018" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="SPC563Mxx-SPI.null.1461388361" name="SPC563Mxx-SPI"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.861226640">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+</cproject>
diff --git a/testhal/SPC564Axx/SPI/.project b/testhal/SPC564Axx/SPI/.project new file mode 100644 index 000000000..bb29d6206 --- /dev/null +++ b/testhal/SPC564Axx/SPI/.project @@ -0,0 +1,38 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>SPC564Axx-SPI</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/boards/ST_EVB_SPC564A</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/testhal/SPC564Axx/SPI/Makefile b/testhal/SPC564Axx/SPI/Makefile new file mode 100644 index 000000000..40fd678a6 --- /dev/null +++ b/testhal/SPC564Axx/SPI/Makefile @@ -0,0 +1,168 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+ USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/boards/ST_EVB_SPC564A/board.mk
+include $(CHIBIOS)/os/hal/platforms/SPC564Axx/platform.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/ports/GCC/PPC/SPC564Axx/port.mk
+include $(CHIBIOS)/os/kernel/kernel.mk
+#include $(CHIBIOS)/test/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(PORTLD)/SPC564A80.ld
+
+# C sources here.
+CSRC = $(PORTSRC) \
+ $(KERNSRC) \
+ $(TESTSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(CHIBIOS)/os/various/evtimer.c \
+ $(CHIBIOS)/os/various/shell.c \
+ $(CHIBIOS)/os/various/chprintf.c \
+ main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(PORTASM)
+
+INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of default section
+#
+
+# List all default C defines here, like -D_DEBUG=1
+DDEFS =
+
+# List all default ASM defines here, like -D_DEBUG=1
+DADEFS =
+
+# List all default directories to look for include files here
+DINCDIR =
+
+# List the default directory to look for the libraries here
+DLIBDIR =
+
+# List all default libraries here
+DLIBS =
+
+#
+# End of default section
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk
diff --git a/testhal/SPC564Axx/SPI/chconf.h b/testhal/SPC564Axx/SPI/chconf.h new file mode 100644 index 000000000..dc956ef13 --- /dev/null +++ b/testhal/SPC564Axx/SPI/chconf.h @@ -0,0 +1,531 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ *
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ */
+#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_TIME_QUANTUM 20
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_USE_MEMCORE.
+ */
+#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread automatically. The application has
+ * then the responsibility to do one of the following:
+ * - Spawn a custom idle thread at priority @p IDLEPRIO.
+ * - Change the main() thread priority to @p IDLEPRIO then enter
+ * an endless loop. In this scenario the @p main() thread acts as
+ * the idle thread.
+ * .
+ * @note Unless an idle thread is spawned the @p main() thread must not
+ * enter a sleep state.
+ */
+#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ * is included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
+#define CH_USE_SEMSW TRUE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MUTEXES.
+ */
+#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_CONDVARS.
+ */
+#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_EVENTS.
+ */
+#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special requirements.
+ * @note Requires @p CH_USE_MESSAGES.
+ */
+#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_SEMAPHORES.
+ */
+#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_USE_QUEUES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
+ * @p CH_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ * @p malloc() and @p free() functions.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_USE_HEAP.
+ * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
+ * appropriate documentation.
+ */
+#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
+#define CH_USE_MALLOC_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_USE_WAITEXIT.
+ * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ */
+#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_TRACE TRUE
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p TRUE.
+ * @note This debug option is defaulted to TRUE because it is required by
+ * some test cases into the test suite.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
+#define CH_DBG_THREADS_PROFILING TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
+#define THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+#endif
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
+#define THREAD_EXT_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+#endif
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+#endif
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_TICK_EVENT_HOOK() { \
+ /* System tick event code here.*/ \
+}
+#endif
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define SYSTEM_HALT_HOOK() { \
+ /* System halt code here.*/ \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/SPC564Axx/SPI/halconf.h b/testhal/SPC564Axx/SPI/halconf.h new file mode 100644 index 000000000..fdc079aef --- /dev/null +++ b/testhal/SPC564Axx/SPI/halconf.h @@ -0,0 +1,312 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM FALSE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/SPC564Axx/SPI/main.c b/testhal/SPC564Axx/SPI/main.c new file mode 100644 index 000000000..46378a5f8 --- /dev/null +++ b/testhal/SPC564Axx/SPI/main.c @@ -0,0 +1,158 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * Maximum speed SPI configuration.
+ */
+static const SPIConfig hs_spicfg = {
+ NULL,
+ 0,
+ 0,
+ SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) |
+ SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */
+ SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */
+};
+
+/*
+ * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first).
+ */
+static const SPIConfig ls_spicfg = {
+ NULL,
+ 0,
+ 0,
+ SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) |
+ SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */
+ SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */
+};
+
+/*
+ * SPI TX and RX buffers.
+ */
+static uint8_t txbuf[512];
+static uint8_t rxbuf[512];
+
+/*
+ * SPI bus contender 1.
+ */
+static WORKING_AREA(spi_thread_1_wa, 256);
+static msg_t spi_thread_1(void *p) {
+
+ (void)p;
+ chRegSetThreadName("SPI thread 1");
+ while (TRUE) {
+ spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */
+ palClearPad(PORT11, P11_LED1); /* LED ON. */
+ spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */
+ spiSelect(&SPID2); /* Slave Select assertion. */
+ spiExchange(&SPID2, 512,
+ txbuf, rxbuf); /* Atomic transfer operations. */
+ spiUnselect(&SPID2); /* Slave Select de-assertion. */
+ spiReleaseBus(&SPID2); /* Ownership release. */
+ }
+ return 0;
+}
+
+/*
+ * SPI bus contender 2.
+ */
+static WORKING_AREA(spi_thread_2_wa, 256);
+static msg_t spi_thread_2(void *p) {
+
+ (void)p;
+ chRegSetThreadName("SPI thread 2");
+ while (TRUE) {
+ spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */
+ palSetPad(PORT11, P11_LED1); /* LED OFF. */
+ spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */
+ spiSelect(&SPID2); /* Slave Select assertion. */
+ spiExchange(&SPID2, 512,
+ txbuf, rxbuf); /* Atomic transfer operations. */
+ spiUnselect(&SPID2); /* Slave Select de-assertion. */
+ spiReleaseBus(&SPID2); /* Ownership release. */
+ }
+ return 0;
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+ unsigned i;
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Prepare transmit pattern.
+ */
+ for (i = 0; i < sizeof(txbuf); i++)
+ txbuf[i] = (uint8_t)i;
+
+ /* Starting driver for test, DSPI_B I/O pins setup.*/
+ spiStart(&SPID2, &ls_spicfg);
+ SIU.PCR[102].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */
+ SIU.PCR[103].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SIN */
+ SIU.PCR[104].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */
+ SIU.PCR[105].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[0] */
+ SIU.PCR[106].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[1] */
+
+ /* Testing sending and receiving at the same time.*/
+ spiExchange(&SPID2, 4, txbuf, rxbuf);
+ spiExchange(&SPID2, 32, txbuf, rxbuf);
+ spiExchange(&SPID2, 512, txbuf, rxbuf);
+
+ /* Testing clock pulses without data buffering.*/
+ spiIgnore(&SPID2, 4);
+ spiIgnore(&SPID2, 32);
+
+ /* Testing sending data ignoring incoming data.*/
+ spiSend(&SPID2, 4, txbuf);
+ spiSend(&SPID2, 32, txbuf);
+
+ /* Testing receiving data while sending idle bits (high level).*/
+ spiReceive(&SPID2, 4, rxbuf);
+ spiReceive(&SPID2, 32, rxbuf);
+
+ /* Testing stop procedure.*/
+ spiStop(&SPID2);
+
+ /*
+ * Starting the transmitter and receiver threads.
+ */
+ chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa),
+ NORMALPRIO + 1, spi_thread_1, NULL);
+ chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa),
+ NORMALPRIO + 1, spi_thread_2, NULL);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing.
+ */
+ while (TRUE) {
+ chThdSleepMilliseconds(500);
+ palTogglePad(PORT11, P11_LED2);
+ }
+ return 0;
+}
diff --git a/testhal/SPC564Axx/SPI/mcuconf.h b/testhal/SPC564Axx/SPI/mcuconf.h new file mode 100644 index 000000000..0683912f9 --- /dev/null +++ b/testhal/SPC564Axx/SPI/mcuconf.h @@ -0,0 +1,127 @@ +/*
+ SPC5 HAL - Copyright (C) 2013 STMicroelectronics
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * SPC563Mxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15 Lowest...Highest.
+ */
+
+#define SPC564Axx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT FALSE
+#define SPC5_CLK_BYPASS FALSE
+#define SPC5_ALLOW_OVERCLOCK FALSE
+#define SPC5_CLK_PREDIV_VALUE 2
+#define SPC5_CLK_MFD_VALUE 75
+#define SPC5_CLK_RFD SPC5_RFD_DIV2
+#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \
+ BIUCR_MASTER4_PREFETCH | \
+ BIUCR_MASTER0_PREFETCH | \
+ BIUCR_DPFEN | \
+ BIUCR_IPFEN | \
+ BIUCR_PFLIM_ON_MISS | \
+ BIUCR_BFEN)
+
+/*
+ * ADC driver settings.
+ */
+#define SPC5_ADC_USE_ADC0_Q0 FALSE
+#define SPC5_ADC_USE_ADC0_Q1 FALSE
+#define SPC5_ADC_USE_ADC0_Q2 FALSE
+#define SPC5_ADC_USE_ADC1_Q3 FALSE
+#define SPC5_ADC_USE_ADC1_Q4 FALSE
+#define SPC5_ADC_USE_ADC1_Q5 FALSE
+#define SPC5_ADC_FIFO0_DMA_PRIO 12
+#define SPC5_ADC_FIFO1_DMA_PRIO 12
+#define SPC5_ADC_FIFO2_DMA_PRIO 12
+#define SPC5_ADC_FIFO3_DMA_PRIO 12
+#define SPC5_ADC_FIFO4_DMA_PRIO 12
+#define SPC5_ADC_FIFO5_DMA_PRIO 12
+#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12
+#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(10)
+#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE}
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_USE_ESCIA TRUE
+#define SPC5_USE_ESCIB TRUE
+#define SPC5_USE_ESCIC TRUE
+#define SPC5_ESCIA_PRIORITY 8
+#define SPC5_ESCIB_PRIORITY 8
+#define SPC5_ESCIC_PRIORITY 8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI1 TRUE
+#define SPC5_SPI_USE_DSPI2 TRUE
+#define SPC5_SPI_USE_DSPI3 TRUE
+#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI3_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_DMA_PRIO 10
+#define SPC5_SPI_DSPI2_DMA_PRIO 10
+#define SPC5_SPI_DSPI3_DMA_PRIO 10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI1_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_IRQ_PRIO 10
+#define SPC5_SPI_DSPI3_IRQ_PRIO 10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
diff --git a/testhal/SPC564Axx/SPI/readme.txt b/testhal/SPC564Axx/SPI/readme.txt new file mode 100644 index 000000000..1e0b7fcc0 --- /dev/null +++ b/testhal/SPC564Axx/SPI/readme.txt @@ -0,0 +1,25 @@ +*****************************************************************************
+** ChibiOS/RT HAL - SPI driver demo for SPC563Mxx. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STMicroelectronics SPC563Mxx microcontroller installed on
+XPC56xx EVB Motherboard.
+
+** The Demo **
+
+The application demonstrates the use of the SPC563Mxx SPI driver.
+
+** Board Setup **
+
+** Build Procedure **
+
+The demo has been tested using HighTec compiler.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+
+ http://www.st.com
|