diff options
Diffstat (limited to 'testhal/AVR/SPI/readme.txt')
| -rw-r--r-- | testhal/AVR/SPI/readme.txt | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/testhal/AVR/SPI/readme.txt b/testhal/AVR/SPI/readme.txt new file mode 100644 index 000000000..399cc230a --- /dev/null +++ b/testhal/AVR/SPI/readme.txt @@ -0,0 +1,25 @@ +*****************************************************************************
+** ChibiOS/RT port for Atmel AVR ATmega1280. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino board.
+
+** The Demo **
+
+Connect the SPI interfaces of two Arduino boards. Configure one as master, the other
+as slave using the #define statement in main.c.
+
+Once the master starts running, the two boards will exchange messages using SPI
+and output the messages over the USB serial port.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo can be programmed onto the Arduino while leaving the Arduino bootloader
+in place. This means that the programming can be done through the USB connector
+as well.
|