1 files changed, 143 insertions, 143 deletions
diff --git a/testhal/ATSAMA5D2/SPI/mcuconf.h b/testhal/ATSAMA5D2/SPI/mcuconf.h
index 13d62e19f..6d02dabd1 100644
--- a/testhal/ATSAMA5D2/SPI/mcuconf.h
+++ b/testhal/ATSAMA5D2/SPI/mcuconf.h
@@ -1,143 +1,143 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-#define SAMA5D2x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define SAMA_HAL_IS_SECURE                  TRUE
-#define SAMA_NO_INIT                        FALSE
-#define SAMA_MOSCRC_ENABLED                 FALSE
-#define SAMA_MOSCXT_ENABLED                 TRUE
-#define SAMA_MOSC_SEL                       SAMA_MOSC_MOSCXT
-#define SAMA_OSC_SEL                        SAMA_OSC_OSCXT
-#define SAMA_MCK_SEL                        SAMA_MCK_PLLA_CLK
-#define SAMA_MCK_PRES_VALUE                 1
-#define SAMA_MCK_MDIV_VALUE                 3
-#define SAMA_PLLA_MUL_VALUE                 83
-#define SAMA_PLLADIV2_EN                    TRUE
-#define SAMA_H64MX_H32MX_RATIO              2
-
-/*
- * SPI driver system settings.
- */
-#define SAMA_SPI_USE_SPI0                   FALSE
-#define SAMA_SPI_USE_SPI1                   TRUE
-#define SAMA_SPI_USE_FLEXCOM0               FALSE
-#define SAMA_SPI_USE_FLEXCOM1               FALSE
-#define SAMA_SPI_USE_FLEXCOM2               FALSE
-#define SAMA_SPI_USE_FLEXCOM3               FALSE
-#define SAMA_SPI_USE_FLEXCOM4               FALSE
-#define SAMA_SPI_SPI0_DMA_IRQ_PRIORITY      4
-#define SAMA_SPI_SPI1_DMA_IRQ_PRIORITY      4
-#define SAMA_SPI_FLEXCOM0_DMA_IRQ_PRIORITY  4
-#define SAMA_SPI_FLEXCOM1_DMA_IRQ_PRIORITY  4
-#define SAMA_SPI_FLEXCOM2_DMA_IRQ_PRIORITY  4
-#define SAMA_SPI_FLEXCOM3_DMA_IRQ_PRIORITY  4
-#define SAMA_SPI_FLEXCOM4_DMA_IRQ_PRIORITY  4
-#define SAMA_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DMA failure")
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_NONE
-
-/*
- * SECUMOD driver system settings.
- */
-#define HAL_USE_SECUMOD                     FALSE
-
-/*
- * SDMMC driver system settings.
- */
-#define HAL_USE_SDMMC                       FALSE
-
-/*
- * SERIAL driver system settings.
- */
-#define SAMA_SERIAL_USE_UART0               FALSE
-#define SAMA_SERIAL_USE_UART1               TRUE
-#define SAMA_SERIAL_USE_UART2               FALSE
-#define SAMA_SERIAL_USE_UART3               FALSE
-#define SAMA_SERIAL_USE_UART4               FALSE
-#define SAMA_SERIAL_USE_FLEXCOM0            FALSE
-#define SAMA_SERIAL_USE_FLEXCOM1            FALSE
-#define SAMA_SERIAL_USE_FLEXCOM2            FALSE
-#define SAMA_SERIAL_USE_FLEXCOM3            FALSE
-#define SAMA_SERIAL_USE_FLEXCOM4            FALSE
-#define SAMA_SERIAL_UART0_IRQ_PRIORITY      4
-#define SAMA_SERIAL_UART1_IRQ_PRIORITY      4
-#define SAMA_SERIAL_UART2_IRQ_PRIORITY      4
-#define SAMA_SERIAL_UART3_IRQ_PRIORITY      4
-#define SAMA_SERIAL_UART4_IRQ_PRIORITY      4
-#define SAMA_SERIAL_FLEXCOM0_IRQ_PRIORITY   4
-#define SAMA_SERIAL_FLEXCOM1_IRQ_PRIORITY   4
-#define SAMA_SERIAL_FLEXCOM2_IRQ_PRIORITY   4
-#define SAMA_SERIAL_FLEXCOM3_IRQ_PRIORITY   4
-#define SAMA_SERIAL_FLEXCOM4_IRQ_PRIORITY   4
-
-/*
- * ST driver settings.
- */
-#define SAMA_ST_USE_PIT                     TRUE
-#define SAMA_ST_USE_TC0                     FALSE
-#define SAMA_ST_USE_TC1                     FALSE
-
-/*
- * TC driver system settings.
- */
-#define HAL_USE_TC                          FALSE
-#define SAMA_USE_TC0                        FALSE
-#define SAMA_USE_TC1                        FALSE
-#define SAMA_TC0_IRQ_PRIORITY               2
-#define SAMA_TC1_IRQ_PRIORITY               2
-
-/*
- * UART driver system settings.
- */
-#define SAMA_UART_USE_UART0                 FALSE
-#define SAMA_UART_USE_UART1                 FALSE
-#define SAMA_UART_USE_UART2                 FALSE
-#define SAMA_UART_USE_UART3                 FALSE
-#define SAMA_UART_USE_UART4                 FALSE
-#define SAMA_UART_USE_FLEXCOM0              FALSE
-#define SAMA_UART_USE_FLEXCOM1              FALSE
-#define SAMA_UART_USE_FLEXCOM2              FALSE
-#define SAMA_UART_USE_FLEXCOM3              FALSE
-#define SAMA_UART_USE_FLEXCOM4              FALSE
-#define SAMA_UART_UART0_IRQ_PRIORITY        4
-#define SAMA_UART_UART1_IRQ_PRIORITY        4
-#define SAMA_UART_UART2_IRQ_PRIORITY        4
-#define SAMA_UART_UART3_IRQ_PRIORITY        4
-#define SAMA_UART_UART4_IRQ_PRIORITY        4
-#define SAMA_UART_FLEXCOM0_IRQ_PRIORITY     4
-#define SAMA_UART_FLEXCOM1_IRQ_PRIORITY     4
-#define SAMA_UART_FLEXCOM2_IRQ_PRIORITY     4
-#define SAMA_UART_FLEXCOM3_IRQ_PRIORITY     4
-#define SAMA_UART_FLEXCOM4_IRQ_PRIORITY     4
-#define SAMA_UART_UART0_DMA_IRQ_PRIORITY    4
-#define SAMA_UART_UART1_DMA_IRQ_PRIORITY    4
-#define SAMA_UART_UART2_DMA_IRQ_PRIORITY    4
-#define SAMA_UART_UART3_DMA_IRQ_PRIORITY    4
-#define SAMA_UART_UART4_DMA_IRQ_PRIORITY    4
-#define SAMA_UART_FLEXCOM0_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM1_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM2_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM3_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_FLEXCOM4_DMA_IRQ_PRIORITY 4
-#define SAMA_UART_DMA_ERROR_HOOK(uartp)     osalSysHalt("DMA failure")
-
-#endif /* MCUCONF_H */
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+#define SAMA5D2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SAMA_HAL_IS_SECURE                  TRUE
+#define SAMA_NO_INIT                        TRUE
+#define SAMA_MOSCRC_ENABLED                 FALSE
+#define SAMA_MOSCXT_ENABLED                 TRUE
+#define SAMA_MOSC_SEL                       SAMA_MOSC_MOSCXT
+#define SAMA_OSC_SEL                        SAMA_OSC_OSCXT
+#define SAMA_MCK_SEL                        SAMA_MCK_PLLA_CLK
+#define SAMA_MCK_PRES_VALUE                 1
+#define SAMA_MCK_MDIV_VALUE                 3
+#define SAMA_PLLA_MUL_VALUE                 83
+#define SAMA_PLLADIV2_EN                    TRUE
+#define SAMA_H64MX_H32MX_RATIO              2
+
+/*
+ * SDMMC driver system settings.
+ */
+#define HAL_USE_SDMMC                       FALSE
+
+/*
+ * SECUMOD driver system settings.
+ */
+#define HAL_USE_SECUMOD                     FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SAMA_SERIAL_USE_UART0               FALSE
+#define SAMA_SERIAL_USE_UART1               TRUE
+#define SAMA_SERIAL_USE_UART2               FALSE
+#define SAMA_SERIAL_USE_UART3               FALSE
+#define SAMA_SERIAL_USE_UART4               FALSE
+#define SAMA_SERIAL_USE_FLEXCOM0            FALSE
+#define SAMA_SERIAL_USE_FLEXCOM1            FALSE
+#define SAMA_SERIAL_USE_FLEXCOM2            FALSE
+#define SAMA_SERIAL_USE_FLEXCOM3            FALSE
+#define SAMA_SERIAL_USE_FLEXCOM4            FALSE
+#define SAMA_SERIAL_UART0_IRQ_PRIORITY      4
+#define SAMA_SERIAL_UART1_IRQ_PRIORITY      4
+#define SAMA_SERIAL_UART2_IRQ_PRIORITY      4
+#define SAMA_SERIAL_UART3_IRQ_PRIORITY      4
+#define SAMA_SERIAL_UART4_IRQ_PRIORITY      4
+#define SAMA_SERIAL_FLEXCOM0_IRQ_PRIORITY   4
+#define SAMA_SERIAL_FLEXCOM1_IRQ_PRIORITY   4
+#define SAMA_SERIAL_FLEXCOM2_IRQ_PRIORITY   4
+#define SAMA_SERIAL_FLEXCOM3_IRQ_PRIORITY   4
+#define SAMA_SERIAL_FLEXCOM4_IRQ_PRIORITY   4
+
+/*
+ * SPI driver system settings.
+ */
+#define SAMA_SPI_USE_SPI0                   FALSE
+#define SAMA_SPI_USE_SPI1                   TRUE
+#define SAMA_SPI_USE_FLEXCOM0               FALSE
+#define SAMA_SPI_USE_FLEXCOM1               FALSE
+#define SAMA_SPI_USE_FLEXCOM2               FALSE
+#define SAMA_SPI_USE_FLEXCOM3               FALSE
+#define SAMA_SPI_USE_FLEXCOM4               FALSE
+#define SAMA_SPI_SPI0_DMA_IRQ_PRIORITY      4
+#define SAMA_SPI_SPI1_DMA_IRQ_PRIORITY      4
+#define SAMA_SPI_FLEXCOM0_DMA_IRQ_PRIORITY  4
+#define SAMA_SPI_FLEXCOM1_DMA_IRQ_PRIORITY  4
+#define SAMA_SPI_FLEXCOM2_DMA_IRQ_PRIORITY  4
+#define SAMA_SPI_FLEXCOM3_DMA_IRQ_PRIORITY  4
+#define SAMA_SPI_FLEXCOM4_DMA_IRQ_PRIORITY  4
+#define SAMA_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DMA failure")
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_NONE
+
+/*
+ * ST driver settings.
+ */
+#define SAMA_ST_USE_PIT                     FALSE
+#define SAMA_ST_USE_TC0                     FALSE
+#define SAMA_ST_USE_TC1                     TRUE
+
+/*
+ * TC driver system settings.
+ */
+#define HAL_USE_TC                          FALSE
+#define SAMA_USE_TC0                        FALSE
+#define SAMA_USE_TC1                        FALSE
+#define SAMA_TC0_IRQ_PRIORITY               2
+#define SAMA_TC1_IRQ_PRIORITY               2
+
+/*
+ * UART driver system settings.
+ */
+#define SAMA_UART_USE_UART0                 FALSE
+#define SAMA_UART_USE_UART1                 FALSE
+#define SAMA_UART_USE_UART2                 FALSE
+#define SAMA_UART_USE_UART3                 FALSE
+#define SAMA_UART_USE_UART4                 FALSE
+#define SAMA_UART_USE_FLEXCOM0              FALSE
+#define SAMA_UART_USE_FLEXCOM1              FALSE
+#define SAMA_UART_USE_FLEXCOM2              FALSE
+#define SAMA_UART_USE_FLEXCOM3              FALSE
+#define SAMA_UART_USE_FLEXCOM4              FALSE
+#define SAMA_UART_UART0_IRQ_PRIORITY        4
+#define SAMA_UART_UART1_IRQ_PRIORITY        4
+#define SAMA_UART_UART2_IRQ_PRIORITY        4
+#define SAMA_UART_UART3_IRQ_PRIORITY        4
+#define SAMA_UART_UART4_IRQ_PRIORITY        4
+#define SAMA_UART_FLEXCOM0_IRQ_PRIORITY     4
+#define SAMA_UART_FLEXCOM1_IRQ_PRIORITY     4
+#define SAMA_UART_FLEXCOM2_IRQ_PRIORITY     4
+#define SAMA_UART_FLEXCOM3_IRQ_PRIORITY     4
+#define SAMA_UART_FLEXCOM4_IRQ_PRIORITY     4
+#define SAMA_UART_UART0_DMA_IRQ_PRIORITY    4
+#define SAMA_UART_UART1_DMA_IRQ_PRIORITY    4
+#define SAMA_UART_UART2_DMA_IRQ_PRIORITY    4
+#define SAMA_UART_UART3_DMA_IRQ_PRIORITY    4
+#define SAMA_UART_UART4_DMA_IRQ_PRIORITY    4
+#define SAMA_UART_FLEXCOM0_DMA_IRQ_PRIORITY 4
+#define SAMA_UART_FLEXCOM1_DMA_IRQ_PRIORITY 4
+#define SAMA_UART_FLEXCOM2_DMA_IRQ_PRIORITY 4
+#define SAMA_UART_FLEXCOM3_DMA_IRQ_PRIORITY 4
+#define SAMA_UART_FLEXCOM4_DMA_IRQ_PRIORITY 4
+#define SAMA_UART_DMA_ERROR_HOOK(uartp)     osalSysHalt("DMA failure")
+
+#endif /* MCUCONF_H */