diff options
Diffstat (limited to 'os/hal/templates/hal_uart_lld.h')
| -rw-r--r-- | os/hal/templates/hal_uart_lld.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/os/hal/templates/hal_uart_lld.h b/os/hal/templates/hal_uart_lld.h new file mode 100644 index 000000000..275a174b3 --- /dev/null +++ b/os/hal/templates/hal_uart_lld.h @@ -0,0 +1,202 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file uart_lld.h
+ * @brief PLATFORM UART subsystem low level driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef _UART_LLD_H_
+#define _UART_LLD_H_
+
+#if (HAL_USE_UART == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name PLATFORM configuration options
+ * @{
+ */
+/**
+ * @brief UART driver enable switch.
+ * @details If set to @p TRUE the support for UART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(PLATFORM_UART_USE_UART1) || defined(__DOXYGEN__)
+#define PLATFORM_UART_USE_UART1 FALSE
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Type of structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object triggering the
+ * callback
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object triggering the
+ * callback
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Synchronization flag for transmit operations.
+ */
+ bool early;
+ /**
+ * @brief Waiting thread on RX.
+ */
+ thread_reference_t threadrx;
+ /**
+ * @brief Waiting thread on TX.
+ */
+ thread_reference_t threadtx;
+#endif /* UART_USE_WAIT */
+#if (UART_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* UART_USE_MUTUAL_EXCLUSION */
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if (PLATFORM_UART_USE_UART1 == TRUE) && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART == TRUE */
+
+#endif /* _UART_LLD_H_ */
+
+/** @} */
|