diff options
Diffstat (limited to 'os/hal/ports/STM32F30x/adc_lld.c')
| -rw-r--r-- | os/hal/ports/STM32F30x/adc_lld.c | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/os/hal/ports/STM32F30x/adc_lld.c b/os/hal/ports/STM32F30x/adc_lld.c new file mode 100644 index 000000000..d516cf21b --- /dev/null +++ b/os/hal/ports/STM32F30x/adc_lld.c @@ -0,0 +1,548 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/adc_lld.c
+ * @brief STM32F30x ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#if STM32_ADC_DUAL_MODE
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_HWORD
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_PSIZE_WORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_WORD
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+
+#else /* !STM32_ADC_DUAL_MODE */
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_BYTE | STM32_DMA_CR_PSIZE_BYTE)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+#endif /* !STM32_ADC_DUAL_MODE */
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+ADCDriver ADCD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_0;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_0;
+#endif
+ osalSysPolledDelayX(US2RTC(10));
+}
+
+/**
+ * @brief Disables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_1;
+#endif
+}
+
+/**
+ * @brief Enables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADEN;
+ while ((adcp->adcm->ISR & ADC_ISR_ADRDY) == 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADEN;
+ while ((adcp->adcs->ISR & ADC_ISR_ADRDY) == 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Disables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcm->CR & ADC_CR_ADDIS) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcs->CR & ADC_CR_ADDIS) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Calibrates and ADC unit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_calibrate(ADCDriver *adcp) {
+
+ osalDbgAssert(adcp->adcm->CR == ADC_CR_ADVREGEN_0, "invalid register state");
+ adcp->adcm->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcm->CR & ADC_CR_ADCAL) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ osalDbgAssert(adcp->adcs->CR == ADC_CR_ADVREGEN_0, "invalid register state");
+ adcp->adcs->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcs->CR & ADC_CR_ADCAL) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Stops an ongoing conversion, if any.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_stop_adc(ADCDriver *adcp) {
+
+ if (adcp->adcm->CR & ADC_CR_ADSTART) {
+ adcp->adcm->CR |= ADC_CR_ADSTP;
+ while (adcp->adcm->CR & ADC_CR_ADSTP)
+ ;
+ }
+}
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_dma_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ }
+ }
+}
+
+/**
+ * @brief ADC ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] isr content of the ISR register
+ */
+static void adc_lld_serve_interrupt(ADCDriver *adcp, uint32_t isr) {
+
+ /* It could be a spurious interrupt caused by overflows after DMA disabling,
+ just ignore it in this case.*/
+ if (adcp->grpp != NULL) {
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((isr & ADC_ISR_OVR) &&
+ (dmaStreamGetTransactionSize(adcp->dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ _adc_isr_error_code(adcp, ADC_ERR_OVERFLOW);
+ }
+ if (isr & ADC_ISR_AWD1) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD1);
+ }
+ if (isr & ADC_ISR_AWD2) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD2);
+ }
+ if (isr & ADC_ISR_AWD3) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD3);
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+/**
+ * @brief ADC1/ADC2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector88) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+#if STM32_ADC_DUAL_MODE
+ isr = ADC1->ISR;
+ isr |= ADC2->ISR;
+ ADC1->ISR = isr;
+ ADC2->ISR = isr;
+#else /* !STM32_ADC_DUAL_MODE */
+ isr = ADC1->ISR;
+ ADC1->ISR = isr;
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ adc_lld_serve_interrupt(&ADCD1, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+/**
+ * @brief ADC3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(VectorFC) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC3->ISR;
+ ADC3->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#if STM32_ADC_DUAL_MODE
+/**
+ * @brief ADC4 interrupt handler (as ADC3 slave).
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector134) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC4->ISR;
+ ADC4->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_DUAL_MODE */
+#endif /* STM32_ADC_USE_ADC3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adcc = ADC1_2;
+ ADCD1.adcm = ADC1;
+#if STM32_ADC_DUAL_MODE
+ ADCD1.adcs = ADC2;
+#endif
+ ADCD1.dmastp = STM32_DMA1_STREAM1;
+ ADCD1.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC1_2_IRQn, STM32_ADC_ADC12_IRQ_PRIORITY);
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD3);
+ ADCD3.adcc = ADC3_4;
+ ADCD3.adcm = ADC3;
+#if STM32_ADC_DUAL_MODE
+ ADCD3.adcs = ADC4;
+#endif
+ ADCD3.dmastp = STM32_DMA2_STREAM5;
+ ADCD3.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC3_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#if STM32_ADC_DUAL_MODE
+ nvicEnableVector(ADC4_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#endif
+#endif /* STM32_ADC_USE_ADC3 */
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool_t b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC12_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableADC12(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp) {
+ bool_t b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC34_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableADC34(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC2 */
+
+ /* Setting DMA peripheral-side pointer.*/
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcc->CDR);
+#else
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcm->DR);
+#endif
+
+ /* Clock source setting.*/
+ adcp->adcc->CCR = STM32_ADC_ADC12_CLOCK_MODE | ADC_DMA_MDMA;
+
+ /* Master ADC calibration.*/
+ adc_lld_vreg_on(adcp);
+ adc_lld_calibrate(adcp);
+
+ /* Master ADC enabled here in order to reduce conversions latencies.*/
+ adc_lld_analog_on(adcp);
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock and analog part.*/
+ if (adcp->state == ADC_READY) {
+
+ /* Releasing the associated DMA channel.*/
+ dmaStreamRelease(adcp->dmastp);
+
+ /* Stopping the ongoing conversion, if any.*/
+ adc_lld_stop_adc(adcp);
+
+ /* Disabling ADC analog circuit and regulator.*/
+ adc_lld_analog_off(adcp);
+ adc_lld_vreg_off(adcp);
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC12(FALSE);
+#endif
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD1 == adcp)
+ rccDisableADC34(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t dmamode, ccr, cfgr;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ osalDbgAssert(!STM32_ADC_DUAL_MODE || ((grpp->num_channels & 1) == 0),
+ "odd number of channels in dual mode");
+
+ /* Calculating control registers values.*/
+ dmamode = adcp->dmamode;
+ ccr = grpp->ccr | (adcp->adcc->CCR & (ADC_CCR_CKMODE_MASK |
+ ADC_CCR_MDMA_MASK));
+ cfgr = grpp->cfgr | ADC_CFGR_CONT | ADC_CFGR_DMAEN;
+ if (grpp->circular) {
+ dmamode |= STM32_DMA_CR_CIRC;
+#if STM32_ADC_DUAL_MODE
+ ccr |= ADC_CCR_DMACFG_CIRCULAR;
+#else
+ cfgr |= ADC_CFGR_DMACFG_CIRCULAR;
+#endif
+ }
+
+ /* DMA setup.*/
+ if (adcp->depth > 1) {
+ /* If the buffer depth is greater than one then the half transfer interrupt
+ interrupt is enabled in order to allows streaming processing.*/
+ dmamode |= STM32_DMA_CR_HTIE;
+ }
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetTransactionSize(adcp->dmastp, ((uint32_t)grpp->num_channels/2) *
+ (uint32_t)adcp->depth);
+#else
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+#endif
+ dmaStreamSetMode(adcp->dmastp, dmamode);
+ dmaStreamEnable(adcp->dmastp);
+
+ /* Configuring the CCR register with the static settings ORed with
+ the user-specified settings in the conversion group configuration
+ structure.*/
+ adcp->adcc->CCR = ccr;
+
+ /* ADC setup, if it is defined a callback for the analog watch dog then it
+ is enabled.*/
+ adcp->adcm->ISR = adcp->adcm->ISR;
+ adcp->adcm->IER = ADC_IER_OVR | ADC_IER_AWD1;
+ adcp->adcm->TR1 = grpp->tr1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+ adcp->adcs->SMPR1 = grpp->ssmpr[0];
+ adcp->adcs->SMPR2 = grpp->ssmpr[1];
+ adcp->adcs->SQR1 = grpp->ssqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcs->SQR2 = grpp->ssqr[1];
+ adcp->adcs->SQR3 = grpp->ssqr[2];
+ adcp->adcs->SQR4 = grpp->ssqr[3];
+
+#else /* !STM32_ADC_DUAL_MODE */
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ /* ADC configuration.*/
+ adcp->adcm->CFGR = cfgr;
+
+ /* Starting conversion.*/
+ adcp->adcm->CR |= ADC_CR_ADSTART;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adc_lld_stop_adc(adcp);
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
|