diff options
Diffstat (limited to 'os/hal/ports/STM32F0xx/hal_lld.h')
| -rw-r--r-- | os/hal/ports/STM32F0xx/hal_lld.h | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/os/hal/ports/STM32F0xx/hal_lld.h b/os/hal/ports/STM32F0xx/hal_lld.h new file mode 100644 index 000000000..c7238de56 --- /dev/null +++ b/os/hal/ports/STM32F0xx/hal_lld.h @@ -0,0 +1,781 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/hal_lld.h
+ * @brief STM32F0xx HAL subsystem low level driver header.
+ * @pre This module requires the following macros to be defined in the
+ * @p board.h file:
+ * - STM32_LSECLK.
+ * - STM32_LSEDRV.
+ * - STM32_LSE_BYPASS (optionally).
+ * - STM32_HSECLK.
+ * - STM32_HSE_BYPASS (optionally).
+ * .
+ * One of the following macros must also be defined:
+ * - STM32F0XX for Entry Level devices.
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _HAL_LLD_H_
+#define _HAL_LLD_H_
+
+#include "stm32.h"
+#include "stm32_registry.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Defines the support for realtime counters in the HAL.
+ */
+#define HAL_IMPLEMENTS_COUNTERS FALSE
+
+/**
+ * @name Platform identification
+ * @{
+ */
+#define PLATFORM_NAME "STM32F05x Entry Level"
+/** @} */
+
+/**
+ * @name Absolute Maximum Ratings
+ * @{
+ */
+/**
+ * @brief Maximum system clock frequency.
+ */
+#define STM32_SYSCLK_MAX 48000000
+
+/**
+ * @brief Maximum HSE clock frequency.
+ */
+#define STM32_HSECLK_MAX 32000000
+
+/**
+ * @brief Minimum HSE clock frequency.
+ */
+#define STM32_HSECLK_MIN 1000000
+
+/**
+ * @brief Maximum LSE clock frequency.
+ */
+#define STM32_LSECLK_MAX 1000000
+
+/**
+ * @brief Minimum LSE clock frequency.
+ */
+#define STM32_LSECLK_MIN 32768
+
+/**
+ * @brief Maximum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MAX 25000000
+
+/**
+ * @brief Minimum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MIN 1000000
+
+/**
+ * @brief Maximum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MAX 48000000
+
+/**
+ * @brief Minimum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MIN 16000000
+
+/**
+ * @brief Maximum APB clock frequency.
+ */
+#define STM32_PCLK_MAX 48000000
+
+/**
+ * @brief Maximum ADC clock frequency.
+ */
+#define STM32_ADCCLK_MAX 14000000
+/** @} */
+
+/**
+ * @name Internal clock sources
+ * @{
+ */
+#define STM32_HSICLK 8000000 /**< High speed internal clock. */
+#define STM32_HSI14CLK 14000000 /**< 14MHz speed internal clock.*/
+#define STM32_LSICLK 40000 /**< Low speed internal clock. */
+/** @} */
+
+/**
+ * @name PWR_CR register bits definitions
+ * @{
+ */
+#define STM32_PLS_MASK (7 << 5) /**< PLS bits mask. */
+#define STM32_PLS_LEV0 (0 << 5) /**< PVD level 0. */
+#define STM32_PLS_LEV1 (1 << 5) /**< PVD level 1. */
+#define STM32_PLS_LEV2 (2 << 5) /**< PVD level 2. */
+#define STM32_PLS_LEV3 (3 << 5) /**< PVD level 3. */
+#define STM32_PLS_LEV4 (4 << 5) /**< PVD level 4. */
+#define STM32_PLS_LEV5 (5 << 5) /**< PVD level 5. */
+#define STM32_PLS_LEV6 (6 << 5) /**< PVD level 6. */
+#define STM32_PLS_LEV7 (7 << 5) /**< PVD level 7. */
+/** @} */
+
+/**
+ * @name RCC_CFGR register bits definitions
+ * @{
+ */
+#define STM32_SW_HSI (0 << 0) /**< SYSCLK source is HSI. */
+#define STM32_SW_HSE (1 << 0) /**< SYSCLK source is HSE. */
+#define STM32_SW_PLL (2 << 0) /**< SYSCLK source is PLL. */
+
+#define STM32_HPRE_DIV1 (0 << 4) /**< SYSCLK divided by 1. */
+#define STM32_HPRE_DIV2 (8 << 4) /**< SYSCLK divided by 2. */
+#define STM32_HPRE_DIV4 (9 << 4) /**< SYSCLK divided by 4. */
+#define STM32_HPRE_DIV8 (10 << 4) /**< SYSCLK divided by 8. */
+#define STM32_HPRE_DIV16 (11 << 4) /**< SYSCLK divided by 16. */
+#define STM32_HPRE_DIV64 (12 << 4) /**< SYSCLK divided by 64. */
+#define STM32_HPRE_DIV128 (13 << 4) /**< SYSCLK divided by 128. */
+#define STM32_HPRE_DIV256 (14 << 4) /**< SYSCLK divided by 256. */
+#define STM32_HPRE_DIV512 (15 << 4) /**< SYSCLK divided by 512. */
+
+#define STM32_PPRE_DIV1 (0 << 8) /**< HCLK divided by 1. */
+#define STM32_PPRE_DIV2 (4 << 8) /**< HCLK divided by 2. */
+#define STM32_PPRE_DIV4 (5 << 8) /**< HCLK divided by 4. */
+#define STM32_PPRE_DIV8 (6 << 8) /**< HCLK divided by 8. */
+#define STM32_PPRE_DIV16 (7 << 8) /**< HCLK divided by 16. */
+
+#define STM32_ADCPRE_DIV2 (0 << 14) /**< PCLK divided by 2. */
+#define STM32_ADCPRE_DIV4 (1 << 14) /**< PCLK divided by 4. */
+
+#define STM32_PLLSRC_HSI (0 << 16) /**< PLL clock source is HSI. */
+#define STM32_PLLSRC_HSE (1 << 16) /**< PLL clock source is HSE. */
+
+#define STM32_MCOSEL_NOCLOCK (0 << 24) /**< No clock on MCO pin. */
+#define STM32_MCOSEL_HSI14 (3 << 24) /**< HSI14 clock on MCO pin. */
+#define STM32_MCOSEL_SYSCLK (4 << 24) /**< SYSCLK on MCO pin. */
+#define STM32_MCOSEL_HSI (5 << 24) /**< HSI clock on MCO pin. */
+#define STM32_MCOSEL_HSE (6 << 24) /**< HSE clock on MCO pin. */
+#define STM32_MCOSEL_PLLDIV2 (7 << 24) /**< PLL/2 clock on MCO pin. */
+/** @} */
+
+/**
+ * @name RCC_BDCR register bits definitions
+ * @{
+ */
+#define STM32_RTCSEL_MASK (3 << 8) /**< RTC clock source mask. */
+#define STM32_RTCSEL_NOCLOCK (0 << 8) /**< No clock. */
+#define STM32_RTCSEL_LSE (1 << 8) /**< LSE used as RTC clock. */
+#define STM32_RTCSEL_LSI (2 << 8) /**< LSI used as RTC clock. */
+#define STM32_RTCSEL_HSEDIV (3 << 8) /**< HSE divided by 32 used as
+ RTC clock. */
+/** @} */
+
+/**
+ * @name RCC_CFGR3 register bits definitions
+ * @{
+ */
+#define STM32_USART1SW_MASK (3 << 0) /**< USART1 clock source mask. */
+#define STM32_USART1SW_PCLK (0 << 0) /**< USART1 clock is PCLK. */
+#define STM32_USART1SW_SYSCLK (1 << 0) /**< USART1 clock is SYSCLK. */
+#define STM32_USART1SW_LSE (2 << 0) /**< USART1 clock is LSE. */
+#define STM32_USART1SW_HSI (3 << 0) /**< USART1 clock is HSI. */
+#define STM32_I2C1SW_MASK (1 << 4) /**< I2C clock source mask. */
+#define STM32_I2C1SW_HSI (0 << 4) /**< I2C clock is HSI. */
+#define STM32_I2C1SW_SYSCLK (1 << 4) /**< I2C clock is SYSCLK. */
+#define STM32_CECSW_MASK (1 << 6) /**< CEC clock source mask. */
+#define STM32_CECSW_HSI (0 << 6) /**< CEC clock is HSI/244. */
+#define STM32_CECSW_LSE (1 << 6) /**< CEC clock is LSE. */
+#define STM32_ADCSW_MASK (1 << 8) /**< ADC clock source mask. */
+#define STM32_ADCSW_HSI14 (0 << 8) /**< ADC clock is HSI14. */
+#define STM32_ADCSW_PCLK (1 << 8) /**< ADC clock is PCLK/2|4. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief Disables the PWR/RCC initialization in the HAL.
+ */
+#if !defined(STM32_NO_INIT) || defined(__DOXYGEN__)
+#define STM32_NO_INIT FALSE
+#endif
+
+/**
+ * @brief Enables or disables the programmable voltage detector.
+ */
+#if !defined(STM32_PVD_ENABLE) || defined(__DOXYGEN__)
+#define STM32_PVD_ENABLE FALSE
+#endif
+
+/**
+ * @brief Sets voltage level for programmable voltage detector.
+ */
+#if !defined(STM32_PLS) || defined(__DOXYGEN__)
+#define STM32_PLS STM32_PLS_LEV0
+#endif
+
+/**
+ * @brief Enables or disables the HSI clock source.
+ */
+#if !defined(STM32_HSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the HSI14 clock source.
+ */
+#if !defined(STM32_HSI14_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI14_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSI clock source.
+ */
+#if !defined(STM32_LSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSI_ENABLED FALSE
+#endif
+
+/**
+ * @brief Enables or disables the HSE clock source.
+ */
+#if !defined(STM32_HSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSE_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSE clock source.
+ */
+#if !defined(STM32_LSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSE_ENABLED FALSE
+#endif
+
+/**
+ * @brief Main clock source selection.
+ * @note If the selected clock source is not the PLL then the PLL is not
+ * initialized and started.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_SW) || defined(__DOXYGEN__)
+#define STM32_SW STM32_SW_PLL
+#endif
+
+/**
+ * @brief Clock source for the PLL.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLSRC) || defined(__DOXYGEN__)
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#endif
+
+/**
+ * @brief Crystal PLL pre-divider.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PREDIV_VALUE) || defined(__DOXYGEN__)
+#define STM32_PREDIV_VALUE 1
+#endif
+
+/**
+ * @brief PLL multiplier value.
+ * @note The allowed range is 2...16.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLMUL_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLMUL_VALUE 6
+#endif
+
+/**
+ * @brief AHB prescaler value.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_HPRE) || defined(__DOXYGEN__)
+#define STM32_HPRE STM32_HPRE_DIV1
+#endif
+
+/**
+ * @brief APB1 prescaler value.
+ */
+#if !defined(STM32_PPRE) || defined(__DOXYGEN__)
+#define STM32_PPRE STM32_PPRE_DIV1
+#endif
+
+/**
+ * @brief MCO pin setting.
+ */
+#if !defined(STM32_MCOSEL) || defined(__DOXYGEN__)
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#endif
+
+/**
+ * @brief ADC prescaler value.
+ */
+#if !defined(STM32_ADCPRE) || defined(__DOXYGEN__)
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#endif
+
+/**
+ * @brief ADC clock source.
+ */
+#if !defined(STM32_ADCSW) || defined(__DOXYGEN__)
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#endif
+
+/**
+ * @brief CEC clock source.
+ */
+#if !defined(STM32_CECSW) || defined(__DOXYGEN__)
+#define STM32_CECSW STM32_CECSW_HSI
+#endif
+
+/**
+ * @brief I2C1 clock source.
+ */
+#if !defined(STM32_I2C1SW) || defined(__DOXYGEN__)
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#endif
+
+/**
+ * @brief USART1 clock source.
+ */
+#if !defined(STM32_USART1SW) || defined(__DOXYGEN__)
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#endif
+
+/**
+ * @brief RTC clock source.
+ */
+#if !defined(STM32_RTCSEL) || defined(__DOXYGEN__)
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*
+ * Configuration-related checks.
+ */
+#if !defined(STM32F0xx_MCUCONF)
+#error "Using a wrong mcuconf.h file, STM32F0xx_MCUCONF not defined"
+#endif
+
+/*
+ * HSI related checks.
+ */
+#if STM32_HSI_ENABLED
+#else /* !STM32_HSI_ENABLED */
+
+#if STM32_SW == STM32_SW_HSI
+#error "HSI not enabled, required by STM32_SW"
+#endif
+
+#if STM32_CECSW == STM32_CECSW_HSI
+#error "HSI not enabled, required by STM32_CECSW"
+#endif
+
+#if STM32_I2C1SW == STM32_I2C1SW_HSI
+#error "HSI not enabled, required by STM32_I2C1SW"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_HSI
+#error "HSI not enabled, required by STM32_USART1SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSI)
+#error "HSI not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSI) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSI))
+#error "HSI not enabled, required by STM32_MCOSEL"
+#endif
+
+#endif /* !STM32_HSI_ENABLED */
+
+/*
+ * HSI14 related checks.
+ */
+#if STM32_HSI14_ENABLED
+#else /* !STM32_HSI14_ENABLED */
+
+#if STM32_MCOSEL == STM32_MCOSEL_HSI14
+#error "HSI14 not enabled, required by STM32_MCOSEL"
+#endif
+
+#if STM32_ADCSW == STM32_ADCSW_HSI14
+#error "HSI14 not enabled, required by STM32_ADCSW"
+#endif
+
+#endif /* !STM32_HSI14_ENABLED */
+
+/*
+ * HSE related checks.
+ */
+#if STM32_HSE_ENABLED
+
+#if STM32_HSECLK == 0
+#error "HSE frequency not defined"
+#elif (STM32_HSECLK < STM32_HSECLK_MIN) || (STM32_HSECLK > STM32_HSECLK_MAX)
+#error "STM32_HSECLK outside acceptable range (STM32_HSECLK_MIN...STM32_HSECLK_MAX)"
+#endif
+
+#else /* !STM32_HSE_ENABLED */
+
+#if STM32_SW == STM32_SW_HSE
+#error "HSE not enabled, required by STM32_SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE)
+#error "HSE not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSE) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE))
+#error "HSE not enabled, required by STM32_MCOSEL"
+#endif
+
+#if STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#error "HSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_HSE_ENABLED */
+
+/*
+ * LSI related checks.
+ */
+#if STM32_LSI_ENABLED
+#else /* !STM32_LSI_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSI
+#error "LSI not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSI_ENABLED */
+
+/*
+ * LSE related checks.
+ */
+#if STM32_LSE_ENABLED
+
+#if (STM32_LSECLK == 0)
+#error "LSE frequency not defined"
+#endif
+
+#if (STM32_LSECLK < STM32_LSECLK_MIN) || (STM32_LSECLK > STM32_LSECLK_MAX)
+#error "STM32_LSECLK outside acceptable range (STM32_LSECLK_MIN...STM32_LSECLK_MAX)"
+#endif
+
+#if !defined(STM32_LSEDRV)
+#error "STM32_LSEDRV not defined"
+#endif
+
+#if (STM32_LSEDRV >> 3) > 3
+#error "STM32_LSEDRV outside acceptable range ((0<<3)...(3<<3))"
+#endif
+
+#if STM32_CECSW == STM32_CECSW_LSE
+#error "LSE not enabled, required by STM32_CECSW"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_LSE
+#error "LSE not enabled, required by STM32_USART1SW"
+#endif
+
+#else /* !STM32_LSE_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSE
+#error "LSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSE_ENABLED */
+
+/* PLL activation conditions.*/
+#if (STM32_SW == STM32_SW_PLL) || \
+ (STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) || \
+ defined(__DOXYGEN__)
+/**
+ * @brief PLL activation flag.
+ */
+#define STM32_ACTIVATE_PLL TRUE
+#else
+#define STM32_ACTIVATE_PLL FALSE
+#endif
+
+/* HSE prescaler setting check.*/
+#if ((STM32_PREDIV_VALUE >= 1) || (STM32_PREDIV_VALUE <= 16))
+#define STM32_PREDIV ((STM32_PREDIV_VALUE - 1) << 0)
+#else
+#error "invalid STM32_PREDIV value specified"
+#endif
+
+/**
+ * @brief PLLMUL field.
+ */
+#if ((STM32_PLLMUL_VALUE >= 2) && (STM32_PLLMUL_VALUE <= 16)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLMUL ((STM32_PLLMUL_VALUE - 2) << 18)
+#else
+#error "invalid STM32_PLLMUL_VALUE value specified"
+#endif
+
+/**
+ * @brief PLL input clock frequency.
+ */
+#if (STM32_PLLSRC == STM32_PLLSRC_HSE) || defined(__DOXYGEN__)
+#define STM32_PLLCLKIN (STM32_HSECLK / STM32_PREDIV_VALUE)
+#elif STM32_PLLSRC == STM32_PLLSRC_HSI
+#define STM32_PLLCLKIN (STM32_HSICLK / 2)
+#else
+#error "invalid STM32_PLLSRC value specified"
+#endif
+
+/* PLL input frequency range check.*/
+#if (STM32_PLLCLKIN < STM32_PLLIN_MIN) || (STM32_PLLCLKIN > STM32_PLLIN_MAX)
+#error "STM32_PLLCLKIN outside acceptable range (STM32_PLLIN_MIN...STM32_PLLIN_MAX)"
+#endif
+
+/**
+ * @brief PLL output clock frequency.
+ */
+#define STM32_PLLCLKOUT (STM32_PLLCLKIN * STM32_PLLMUL_VALUE)
+
+/* PLL output frequency range check.*/
+#if (STM32_PLLCLKOUT < STM32_PLLOUT_MIN) || (STM32_PLLCLKOUT > STM32_PLLOUT_MAX)
+#error "STM32_PLLCLKOUT outside acceptable range (STM32_PLLOUT_MIN...STM32_PLLOUT_MAX)"
+#endif
+
+/**
+ * @brief System clock source.
+ */
+#if (STM32_SW == STM32_SW_PLL) || defined(__DOXYGEN__)
+#define STM32_SYSCLK STM32_PLLCLKOUT
+#elif (STM32_SW == STM32_SW_HSI)
+#define STM32_SYSCLK STM32_HSICLK
+#elif (STM32_SW == STM32_SW_HSE)
+#define STM32_SYSCLK STM32_HSECLK
+#else
+#error "invalid STM32_SW value specified"
+#endif
+
+/* Check on the system clock.*/
+#if STM32_SYSCLK > STM32_SYSCLK_MAX
+#error "STM32_SYSCLK above maximum rated frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief AHB frequency.
+ */
+#if (STM32_HPRE == STM32_HPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_HCLK (STM32_SYSCLK / 1)
+#elif STM32_HPRE == STM32_HPRE_DIV2
+#define STM32_HCLK (STM32_SYSCLK / 2)
+#elif STM32_HPRE == STM32_HPRE_DIV4
+#define STM32_HCLK (STM32_SYSCLK / 4)
+#elif STM32_HPRE == STM32_HPRE_DIV8
+#define STM32_HCLK (STM32_SYSCLK / 8)
+#elif STM32_HPRE == STM32_HPRE_DIV16
+#define STM32_HCLK (STM32_SYSCLK / 16)
+#elif STM32_HPRE == STM32_HPRE_DIV64
+#define STM32_HCLK (STM32_SYSCLK / 64)
+#elif STM32_HPRE == STM32_HPRE_DIV128
+#define STM32_HCLK (STM32_SYSCLK / 128)
+#elif STM32_HPRE == STM32_HPRE_DIV256
+#define STM32_HCLK (STM32_SYSCLK / 256)
+#elif STM32_HPRE == STM32_HPRE_DIV512
+#define STM32_HCLK (STM32_SYSCLK / 512)
+#else
+#error "invalid STM32_HPRE value specified"
+#endif
+
+/* AHB frequency check.*/
+#if STM32_HCLK > STM32_SYSCLK_MAX
+#error "STM32_HCLK exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief APB frequency.
+ */
+#if (STM32_PPRE == STM32_PPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK (STM32_HCLK / 1)
+#elif STM32_PPRE == STM32_PPRE_DIV2
+#define STM32_PCLK (STM32_HCLK / 2)
+#elif STM32_PPRE == STM32_PPRE_DIV4
+#define STM32_PCLK (STM32_HCLK / 4)
+#elif STM32_PPRE == STM32_PPRE_DIV8
+#define STM32_PCLK (STM32_HCLK / 8)
+#elif STM32_PPRE == STM32_PPRE_DIV16
+#define STM32_PCLK (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE value specified"
+#endif
+
+/* APB frequency check.*/
+#if STM32_PCLK > STM32_PCLK_MAX
+#error "STM32_PCLK exceeding maximum frequency (STM32_PCLK_MAX)"
+#endif
+
+/**
+ * @brief RTC clock.
+ */
+#if (STM32_RTCSEL == STM32_RTCSEL_LSE) || defined(__DOXYGEN__)
+#define STM32_RTCCLK STM32_LSECLK
+#elif STM32_RTCSEL == STM32_RTCSEL_LSI
+#define STM32_RTCCLK STM32_LSICLK
+#elif STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#define STM32_RTCCLK (STM32_HSECLK / 32)
+#elif STM32_RTCSEL == STM32_RTCSEL_NOCLOCK
+#define STM32_RTCCLK 0
+#else
+#error "invalid source selected for RTC clock"
+#endif
+
+/**
+ * @brief ADC frequency.
+ */
+#if STM32_ADCSW == STM32_ADCSW_HSI14
+#define STM32_ADCCLK STM32_HSI14CLK
+#elif STM32_ADCSW == STM32_ADCSW_PCLK
+#if (STM32_ADCPRE == STM32_ADCPRE_DIV2) || defined(__DOXYGEN__)
+#define STM32_ADCCLK (STM32_PCLK / 2)
+#elif STM32_ADCPRE == STM32_ADCPRE_DIV4
+#define STM32_ADCCLK (STM32_PCLK / 4)
+#else
+#error "invalid STM32_ADCPRE value specified"
+#endif
+#else
+#error "invalid source selected for ADC clock"
+#endif
+
+/* ADC frequency check.*/
+#if STM32_ADCCLK > STM32_ADCCLK_MAX
+#error "STM32_ADCCLK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+
+/**
+ * @brief CEC frequency.
+ */
+#if STM32_CECSW == STM32_CECSW_HSI
+#define STM32_CECCLK STM32_HSICLK
+#elif STM32_CECSW == STM32_CECSW_LSE
+#define STM32_CECCLK STM32_LSECLK
+#else
+#error "invalid source selected for CEC clock"
+#endif
+
+/**
+ * @brief I2C1 frequency.
+ */
+#if STM32_I2CSW == STM32_I2C1SW_HSI
+#define STM32_I2C1CLK STM32_HSICLK
+#elif STM32_I2CSW == STM32_I2C1SW_SYSCLK
+#define STM32_I2C1CLK STM32_SYSCLK
+#else
+#error "invalid source selected for I2C1 clock"
+#endif
+
+/**
+ * @brief USART1 frequency.
+ */
+#if STM32_USART1SW == STM32_USART1SW_PCLK
+#define STM32_USART1CLK STM32_PCLK
+#elif STM32_USART1SW == STM32_USART1SW_SYSCLK
+#define STM32_USART1CLK STM32_SYSCLK
+#elif STM32_USART1SW == STM32_USART1SW_LSECLK
+#define STM32_USART1CLK STM32_LSECLK
+#elif STM32_USART1SW == STM32_USART1SW_HSICLK
+#define STM32_USART1CLK STM32_HSICLK
+#else
+#error "invalid source selected for USART1 clock"
+#endif
+
+/**
+ * @brief USART2 frequency.
+ */
+#define STM32_USART2CLK STM32_PCLK
+
+/**
+ * @brief Timers clock.
+ */
+#if (STM32_PPRE == STM32_PPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK1 (STM32_PCLK * 1)
+#define STM32_TIMCLK2 (STM32_PCLK * 1)
+#else
+#define STM32_TIMCLK1 (STM32_PCLK * 2)
+#define STM32_TIMCLK2 (STM32_PCLK * 2)
+#endif
+
+/**
+ * @brief Flash settings.
+ */
+#if (STM32_HCLK <= 24000000) || defined(__DOXYGEN__)
+#define STM32_FLASHBITS 0x00000010
+#else
+#define STM32_FLASHBITS 0x00000011
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/* Various helpers.*/
+#include "nvic.h"
+#include "stm32_isr.h"
+#include "stm32_dma.h"
+#include "stm32_rcc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+ void stm32_clock_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HAL_LLD_H_ */
+
+/** @} */
|