aboutsummaryrefslogtreecommitdiffstats
path: root/os/hal/platforms/STM8L/hal_lld.h
diff options
context:
space:
mode:
Diffstat (limited to 'os/hal/platforms/STM8L/hal_lld.h')
-rw-r--r--os/hal/platforms/STM8L/hal_lld.h282
1 files changed, 0 insertions, 282 deletions
diff --git a/os/hal/platforms/STM8L/hal_lld.h b/os/hal/platforms/STM8L/hal_lld.h
deleted file mode 100644
index 0f8ca6776..000000000
--- a/os/hal/platforms/STM8L/hal_lld.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file STM8L/hal_lld.h
- * @brief STM8L HAL subsystem low level driver source.
- * @pre This module requires the following macros to be defined in the
- * @p board.h file:
- * - HSECLK (@p 0 if disabled or frequency in Hertz).
- * - HSEBYPASS (@p TRUE if external oscillator rather than a crystal).
- * - LSECLK (@p 0 if disabled or frequency in Hertz).
- * - LSEBYPASS (@p TRUE if external oscillator rather than a crystal).
- * .
- * One of the following macros must also be defined:
- * - STM8L15X_MD for Medium Density devices.
- * - STM8L15X_MDP for Medium Density Plus devices.
- * - STM8L15X_HD for High Density devices.
- * .
- *
- * @addtogroup HAL
- * @{
- */
-
-#ifndef _HAL_LLD_H_
-#define _HAL_LLD_H_
-
-#undef FALSE
-#undef TRUE
-#include "stm8l15x.h"
-#define FALSE 0
-#define TRUE (!FALSE)
-
-#if defined (STM8L15X_MD)
-#include "hal_lld_stm8l_md.h"
-#elif defined (STM8L15X_MDP)
-#include "hal_lld_stm8l_mdp.h"
-#elif defined (STM8L15X_HD)
-#include "hal_lld_stm8l_hd.h"
-#else
-#error "unspecified, unsupported or invalid STM8L platform"
-#endif
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/**
- * @brief Defines the support for realtime counters in the HAL.
- */
-#define HAL_IMPLEMENTS_COUNTERS FALSE
-
-/**
- * @brief Platform name.
- */
-#define PLATFORM_NAME "STM8L"
-
-#define LSICLK 38000 /**< Low speed internal clock. */
-#define HSICLK 16000000 /**< High speed internal clock. */
-
-#define CLK_SYSSEL_HSI 1 /**< HSI system clock selector. */
-#define CLK_SYSSEL_LSI 2 /**< LSI system clock selector. */
-#define CLK_SYSSEL_HSE 4 /**< HSE system clock selector. */
-#define CLK_SYSSEL_LSE 8 /**< LSE system clock selector. */
-
-#define CLK_SYSCLK_DIV1 0 /**< Source clock divided by 1. */
-#define CLK_SYSCLK_DIV2 1 /**< Source clock divided by 2. */
-#define CLK_SYSCLK_DIV4 2 /**< Source clock divided by 4. */
-#define CLK_SYSCLK_DIV8 3 /**< Source clock divided by 8. */
-#define CLK_SYSCLK_DIV16 4 /**< Source clock divided by 16. */
-#define CLK_SYSCLK_DIV32 5 /**< Source clock divided by 32. */
-#define CLK_SYSCLK_DIV64 6 /**< Source clock divided by 64. */
-#define CLK_SYSCLK_DIV128 7 /**< Source clock divided by 128. */
-
-#define CLK_RTCSEL_HSI 1 /**< HSI RTC clock selector. */
-#define CLK_RTCSEL_LSI 2 /**< LSI RTC clock selector. */
-#define CLK_RTCSEL_HSE 4 /**< HSE RTC clock selector. */
-#define CLK_RTCSEL_LSE 8 /**< LSE RTC clock selector. */
-
-#define CLK_RTCCLK_DIV1 0 /**< Source clock divided by 1. */
-#define CLK_RTCCLK_DIV2 1 /**< Source clock divided by 2. */
-#define CLK_RTCCLK_DIV4 2 /**< Source clock divided by 4. */
-#define CLK_RTCCLK_DIV8 3 /**< Source clock divided by 8. */
-#define CLK_RTCCLK_DIV16 4 /**< Source clock divided by 16. */
-#define CLK_RTCCLK_DIV32 5 /**< Source clock divided by 32. */
-#define CLK_RTCCLK_DIV64 6 /**< Source clock divided by 64. */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @brief Disables the clock initialization in the HAL.
- */
-#if !defined(STM8L_NO_CLOCK_INIT) || defined(__DOXYGEN__)
-#define STM8L_NO_CLOCK_INIT FALSE
-#endif
-
-/**
- * @brief Enables or disables the HSI clock source.
- */
-#if !defined(STM8L_HSI_ENABLED) || defined(__DOXYGEN__)
-#define STM8L_HSI_ENABLED TRUE
-#endif
-
-/**
- * @brief Enables or disables the LSI clock source.
- */
-#if !defined(STM8L_LSI_ENABLED) || defined(__DOXYGEN__)
-#define STM8L_LSI_ENABLED TRUE
-#endif
-
-/**
- * @brief Enables or disables the HSE clock source.
- */
-#if !defined(STM8L_HSE_ENABLED) || defined(__DOXYGEN__)
-#define STM8L_HSE_ENABLED FALSE
-#endif
-
-/**
- * @brief Enables or disables the LSE clock source.
- */
-#if !defined(STM8L_HSE_ENABLED) || defined(__DOXYGEN__)
-#define STM8L_LSE_ENABLED FALSE
-#endif
-
-/**
- * @brief System clock source selection.
- */
-#if !defined(STM8L_SYSCLK_SOURCE) || defined(__DOXYGEN__)
-#define STM8L_SYSCLK_SOURCE CLK_SYSSEL_HSI
-#endif
-
-/**
- * @brief System clock divider.
- */
-#if !defined(STM8L_SYSCLK_DIVIDER) || defined(__DOXYGEN__)
-#define STM8L_SYSCLK_DIVIDER CLK_SYSCLK_DIV1
-#endif
-
-/**
- * @brief RTC clock source selection.
- */
-#if !defined(STM8L_RTCCLK_SOURCE) || defined(__DOXYGEN__)
-#define STM8L_RTCCLK_SOURCE CLK_RTCSEL_HSI
-#endif
-
-/**
- * @brief RTC clock divider.
- */
-#if !defined(STM8L_RTCCLK_DIVIDER) || defined(__DOXYGEN__)
-#define STM8L_RTCCLK_DIVIDER CLK_RTCCLK_DIV1
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV1) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV2) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV4) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV8) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV16) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV32) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV64) && \
- (STM8L_SYSCLK_DIVIDER != CLK_SYSCLK_DIV128)
-#error "specified invalid SYSCLK divider"
-#endif
-
-#if (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV1) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV2) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV4) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV8) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV16) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV32) && \
- (STM8L_RTCCLK_DIVIDER != CLK_RTCCLK_DIV64)
-#error "specified invalid RTCCLK divider"
-#endif
-
-#if STM8L_HSE_ENABLED && (HSECLK == 0)
-#error "impossible to activate HSE"
-#endif
-
-#if STM8L_LSE_ENABLED && (LSECLK == 0)
-#error "impossible to activate LSE"
-#endif
-
-#if !STM8L_HSI_ENABLED && ((STM8L_SYSCLK_SOURCE == CLK_SYSSEL_HSI) || \
- (STM8L_RTCCLK_SOURCE == CLK_RTCSEL_HSI))
-#error "requested HSI clock is not enabled"
-#endif
-
-#if !STM8L_LSI_ENABLED && ((STM8L_SYSCLK_SOURCE == CLK_SYSSEL_LSI) || \
- (STM8L_RTCCLK_SOURCE == CLK_RTCSEL_LSI))
-#error "requested LSI clock is not enabled"
-#endif
-
-#if !STM8L_HSE_ENABLED && ((STM8L_SYSCLK_SOURCE == CLK_SYSSEL_HSE) || \
- (STM8L_RTCCLK_SOURCE == CLK_RTCSEL_HSE))
-#error "requested HSE clock is not enabled"
-#endif
-
-#if !STM8L_LSE_ENABLED && ((STM8L_SYSCLK_SOURCE == CLK_SYSSEL_LSE) || \
- (STM8L_RTCCLK_SOURCE == CLK_RTCSEL_LSE))
-#error "requested LSE clock is not enabled"
-#endif
-
-/**
- * @brief System clock.
- */
-#if STM8L_NO_CLOCK_INIT || defined(__DOXYGEN__)
-#define SYSCLK (HSICLK / 8)
-#elif STM8L_SYSCLK_SOURCE == CLK_SYSSEL_HSI
-#define SYSCLK (HSICLK / (1 << STM8L_SYSCLK_DIVIDER))
-#elif STM8L_SYSCLK_SOURCE == CLK_SYSSEL_LSI
-#define SYSCLK (LSICLK / (1 << STM8L_SYSCLK_DIVIDER))
-#elif STM8L_SYSCLK_SOURCE == CLK_SYSSEL_HSE
-#define SYSCLK (HSECLK / (1 << STM8L_SYSCLK_DIVIDER))
-#elif STM8L_SYSCLK_SOURCE == CLK_SYSSEL_LSE
-#define SYSCLK (LSECLK / (1 << STM8L_SYSCLK_DIVIDER))
-#else
-#error "specified invalid SYSCLK source"
-#endif
-
-/**
- * @brief RTC clock.
- */
-#if STM8L_NO_CLOCK_INIT || defined(__DOXYGEN__)
-#define RTCCLK 0
-#elif STM8L_RTCCLK_SOURCE == CLK_RTCSEL_HSI
-#define RTCCLK (HSICLK / (1 << STM8L_RTCCLK_DIVIDER))
-#elif STM8L_RTCCLK_SOURCE == CLK_RTCSEL_LSI
-#define RTCCLK (LSICLK / (1 << STM8L_RTCCLK_DIVIDER))
-#elif STM8L_RTCCLK_SOURCE == CLK_RTCSEL_HSE
-#define RTCCLK (HSECLK / (1 << STM8L_RTCCLK_DIVIDER))
-#elif STM8L_RTCCLK_SOURCE == CLK_RTCSEL_LSE
-#define RTCCLK (LSECLK / (1 << STM8L_RTCCLK_DIVIDER))
-#else
-#error "specified invalid RTCCLK source"
-#endif
-
-/**
- * @brief CPU clock.
- * @details On the STM8L the CPU clock is always equal to the system clock.
- */
-#define CPUCLK SYSCLK
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void hal_lld_init(void);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _HAL_LLD_H_ */
-
-/** @} */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 20:27:43 +0000