diff options
Diffstat (limited to 'os/hal/platforms/STM32F1xx/stm32_rcc.h')
| -rw-r--r-- | os/hal/platforms/STM32F1xx/stm32_rcc.h | 961 |
1 files changed, 0 insertions, 961 deletions
diff --git a/os/hal/platforms/STM32F1xx/stm32_rcc.h b/os/hal/platforms/STM32F1xx/stm32_rcc.h deleted file mode 100644 index 61d68831a..000000000 --- a/os/hal/platforms/STM32F1xx/stm32_rcc.h +++ /dev/null @@ -1,961 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file STM32F1xx/stm32_rcc.h
- * @brief RCC helper driver header.
- * @note This file requires definitions from the ST header file
- * @p stm32f10x.h.
- *
- * @addtogroup STM32F1xx_RCC
- * @{
- */
-
-#ifndef _STM32_RCC_
-#define _STM32_RCC_
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/**
- * @name Generic RCC operations
- * @{
- */
-/**
- * @brief Enables the clock of one or more peripheral on the APB1 bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask APB1 peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableAPB1(mask, lp) { \
- RCC->APB1ENR |= (mask); \
-}
-
-/**
- * @brief Disables the clock of one or more peripheral on the APB1 bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask APB1 peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableAPB1(mask, lp) { \
- RCC->APB1ENR &= ~(mask); \
-}
-
-/**
- * @brief Resets one or more peripheral on the APB1 bus.
- *
- * @param[in] mask APB1 peripherals mask
- *
- * @api
- */
-#define rccResetAPB1(mask) { \
- RCC->APB1RSTR |= (mask); \
- RCC->APB1RSTR = 0; \
-}
-
-/**
- * @brief Enables the clock of one or more peripheral on the APB2 bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask APB2 peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableAPB2(mask, lp) { \
- RCC->APB2ENR |= (mask); \
-}
-
-/**
- * @brief Disables the clock of one or more peripheral on the APB2 bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask APB2 peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableAPB2(mask, lp) { \
- RCC->APB2ENR &= ~(mask); \
-}
-
-/**
- * @brief Resets one or more peripheral on the APB2 bus.
- *
- * @param[in] mask APB2 peripherals mask
- *
- * @api
- */
-#define rccResetAPB2(mask) { \
- RCC->APB2RSTR |= (mask); \
- RCC->APB2RSTR = 0; \
-}
-
-/**
- * @brief Enables the clock of one or more peripheral on the AHB bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask AHB peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableAHB(mask, lp) { \
- RCC->AHBENR |= (mask); \
-}
-
-/**
- * @brief Disables the clock of one or more peripheral on the AHB bus.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] mask AHB peripherals mask
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableAHB(mask, lp) { \
- RCC->AHBENR &= ~(mask); \
-}
-
-/**
- * @brief Resets one or more peripheral on the AHB bus.
- *
- * @param[in] mask AHB peripherals mask
- *
- * @api
- */
-#define rccResetAHB(mask) { \
- RCC->AHBRSTR |= (mask); \
- RCC->AHBRSTR = 0; \
-}
-/** @} */
-
-/**
- * @name ADC peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the ADC1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableADC1(lp) rccEnableAPB2(RCC_APB2ENR_ADC1EN, lp)
-
-/**
- * @brief Disables the ADC1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableADC1(lp) rccDisableAPB2(RCC_APB2ENR_ADC1EN, lp)
-
-/**
- * @brief Resets the ADC1 peripheral.
- *
- * @api
- */
-#define rccResetADC1() rccResetAPB2(RCC_APB2RSTR_ADC1RST)
-/** @} */
-
-/**
- * @name Backup domain interface specific RCC operations
- * @{
- */
-/**
- * @brief Enables the BKP interface clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableBKPInterface(lp) rccEnableAPB1((RCC_APB1ENR_BKPEN), lp)
-
-/**
- * @brief Disables BKP interface clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableBKPInterface(lp) rccDisableAPB1((RCC_APB1ENR_BKPEN), lp)
-
-/**
- * @brief Resets the Backup Domain interface.
- *
- * @api
- */
-#define rccResetBKPInterface() rccResetAPB1(RCC_APB1ENR_BKPRST)
-
-/**
- * @brief Resets the entire Backup Domain.
- *
- * @api
- */
-#define rccResetBKP() (RCC->BDCR |= RCC_BDCR_BDRST)
-/** @} */
-
-/**
- * @name PWR interface specific RCC operations
- * @{
- */
-/**
- * @brief Enables the PWR interface clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnablePWRInterface(lp) rccEnableAPB1(RCC_APB1ENR_PWREN, lp)
-
-/**
- * @brief Disables PWR interface clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisablePWRInterface(lp) rccDisableAPB1(RCC_APB1ENR_PWREN, lp)
-
-/**
- * @brief Resets the PWR interface.
- *
- * @api
- */
-#define rccResetPWRInterface() rccResetAPB1(RCC_APB1RSTR_PWRRST)
-/** @} */
-
-/**
- * @name CAN peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the CAN1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableCAN1(lp) rccEnableAPB1(RCC_APB1ENR_CAN1EN, lp)
-
-/**
- * @brief Disables the CAN1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableCAN1(lp) rccDisableAPB1(RCC_APB1ENR_CAN1EN, lp)
-
-/**
- * @brief Resets the CAN1 peripheral.
- *
- * @api
- */
-#define rccResetCAN1() rccResetAPB1(RCC_APB1RSTR_CAN1RST)
-/** @} */
-
-/**
- * @name DMA peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the DMA1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableDMA1(lp) rccEnableAHB(RCC_AHBENR_DMA1EN, lp)
-
-/**
- * @brief Disables the DMA1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableDMA1(lp) rccDisableAHB(RCC_AHBENR_DMA1EN, lp)
-
-/**
- * @brief Resets the DMA1 peripheral.
- * @note Not supported in this family, does nothing.
- *
- * @api
- */
-#define rccResetDMA1()
-
-/**
- * @brief Enables the DMA2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableDMA2(lp) rccEnableAHB(RCC_AHBENR_DMA2EN, lp)
-
-/**
- * @brief Disables the DMA2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableDMA2(lp) rccDisableAHB(RCC_AHBENR_DMA2EN, lp)
-
-/**
- * @brief Resets the DMA1 peripheral.
- * @note Not supported in this family, does nothing.
- *
- * @api
- */
-#define rccResetDMA2()
-/** @} */
-
-/**
- * @name ETH peripheral specific RCC operations
- * @{
- */
-/**
- * @brief Enables the ETH peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableETH(lp) rccEnableAHB(RCC_AHBENR_ETHMACEN | \
- RCC_AHBENR_ETHMACTXEN | \
- RCC_AHBENR_ETHMACRXEN, lp)
-
-/**
- * @brief Disables the ETH peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableETH(lp) rccDisableAHB(RCC_AHBENR_ETHMACEN | \
- RCC_AHBENR_ETHMACTXEN | \
- RCC_AHBENR_ETHMACRXEN, lp)
-
-/**
- * @brief Resets the ETH peripheral.
- *
- * @api
- */
-#define rccResetETH() rccResetAHB(RCC_AHBRSTR_ETHMACRST)
-/** @} */
-
-/**
- * @name I2C peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the I2C1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableI2C1(lp) rccEnableAPB1(RCC_APB1ENR_I2C1EN, lp)
-
-/**
- * @brief Disables the I2C1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableI2C1(lp) rccDisableAPB1(RCC_APB1ENR_I2C1EN, lp)
-
-/**
- * @brief Resets the I2C1 peripheral.
- *
- * @api
- */
-#define rccResetI2C1() rccResetAPB1(RCC_APB1RSTR_I2C1RST)
-
-/**
- * @brief Enables the I2C2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableI2C2(lp) rccEnableAPB1(RCC_APB1ENR_I2C2EN, lp)
-
-/**
- * @brief Disables the I2C2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableI2C2(lp) rccDisableAPB1(RCC_APB1ENR_I2C2EN, lp)
-
-/**
- * @brief Resets the I2C2 peripheral.
- *
- * @api
- */
-#define rccResetI2C2() rccResetAPB1(RCC_APB1RSTR_I2C2RST)
-/** @} */
-
-/**
- * @name OTG peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the OTG_FS peripheral clock.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableOTG_FS(lp) rccEnableAHB(RCC_AHBENR_OTGFSEN, lp)
-
-/**
- * @brief Disables the OTG_FS peripheral clock.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableOTG_FS(lp) rccDisableAHB(RCC_AHBENR_OTGFSEN, lp)
-
-/**
- * @brief Resets the OTG_FS peripheral.
- *
- * @api
- */
-#define rccResetOTG_FS() rccResetAHB(RCC_AHBRSTR_OTGFSRST)
-/** @} */
-
-/**
- * @name SDIO peripheral specific RCC operations
- * @{
- */
-/**
- * @brief Enables the SDIO peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableSDIO(lp) rccEnableAHB(RCC_AHBENR_SDIOEN, lp)
-
-/**
- * @brief Disables the SDIO peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableSDIO(lp) rccDisableAHB(RCC_AHBENR_SDIOEN, lp)
-
-/**
- * @brief Resets the SDIO peripheral.
- * @note Not supported in this family, does nothing.
- *
- * @api
- */
-#define rccResetSDIO()
-/** @} */
-
-/**
- * @name SPI peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the SPI1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableSPI1(lp) rccEnableAPB2(RCC_APB2ENR_SPI1EN, lp)
-
-/**
- * @brief Disables the SPI1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableSPI1(lp) rccDisableAPB2(RCC_APB2ENR_SPI1EN, lp)
-
-/**
- * @brief Resets the SPI1 peripheral.
- *
- * @api
- */
-#define rccResetSPI1() rccResetAPB2(RCC_APB2RSTR_SPI1RST)
-
-/**
- * @brief Enables the SPI2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableSPI2(lp) rccEnableAPB1(RCC_APB1ENR_SPI2EN, lp)
-
-/**
- * @brief Disables the SPI2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableSPI2(lp) rccDisableAPB1(RCC_APB1ENR_SPI2EN, lp)
-
-/**
- * @brief Resets the SPI2 peripheral.
- *
- * @api
- */
-#define rccResetSPI2() rccResetAPB1(RCC_APB1RSTR_SPI2RST)
-
-/**
- * @brief Enables the SPI3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableSPI3(lp) rccEnableAPB1(RCC_APB1ENR_SPI3EN, lp)
-
-/**
- * @brief Disables the SPI3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableSPI3(lp) rccDisableAPB1(RCC_APB1ENR_SPI3EN, lp)
-
-/**
- * @brief Resets the SPI3 peripheral.
- *
- * @api
- */
-#define rccResetSPI3() rccResetAPB1(RCC_APB1RSTR_SPI3RST)
-/** @} */
-
-/**
- * @name TIM peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the TIM1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM1(lp) rccEnableAPB2(RCC_APB2ENR_TIM1EN, lp)
-
-/**
- * @brief Disables the TIM1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM1(lp) rccDisableAPB2(RCC_APB2ENR_TIM1EN, lp)
-
-/**
- * @brief Resets the TIM1 peripheral.
- *
- * @api
- */
-#define rccResetTIM1() rccResetAPB2(RCC_APB2RSTR_TIM1RST)
-
-/**
- * @brief Enables the TIM2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM2(lp) rccEnableAPB1(RCC_APB1ENR_TIM2EN, lp)
-
-/**
- * @brief Disables the TIM2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM2(lp) rccDisableAPB1(RCC_APB1ENR_TIM2EN, lp)
-
-/**
- * @brief Resets the TIM2 peripheral.
- *
- * @api
- */
-#define rccResetTIM2() rccResetAPB1(RCC_APB1RSTR_TIM2RST)
-
-/**
- * @brief Enables the TIM3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM3(lp) rccEnableAPB1(RCC_APB1ENR_TIM3EN, lp)
-
-/**
- * @brief Disables the TIM3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM3(lp) rccDisableAPB1(RCC_APB1ENR_TIM3EN, lp)
-
-/**
- * @brief Resets the TIM3 peripheral.
- *
- * @api
- */
-#define rccResetTIM3() rccResetAPB1(RCC_APB1RSTR_TIM3RST)
-
-/**
- * @brief Enables the TIM4 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM4(lp) rccEnableAPB1(RCC_APB1ENR_TIM4EN, lp)
-
-/**
- * @brief Disables the TIM4 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM4(lp) rccDisableAPB1(RCC_APB1ENR_TIM4EN, lp)
-
-/**
- * @brief Resets the TIM4 peripheral.
- *
- * @api
- */
-#define rccResetTIM4() rccResetAPB1(RCC_APB1RSTR_TIM4RST)
-
-/**
- * @brief Enables the TIM5 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM5(lp) rccEnableAPB1(RCC_APB1ENR_TIM5EN, lp)
-
-/**
- * @brief Disables the TIM5 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM5(lp) rccDisableAPB1(RCC_APB1ENR_TIM5EN, lp)
-
-/**
- * @brief Resets the TIM5 peripheral.
- *
- * @api
- */
-#define rccResetTIM5() rccResetAPB1(RCC_APB1RSTR_TIM5RST)
-
-/**
- * @brief Enables the TIM8 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableTIM8(lp) rccEnableAPB2(RCC_APB2ENR_TIM8EN, lp)
-
-/**
- * @brief Disables the TIM8 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableTIM8(lp) rccDisableAPB2(RCC_APB2ENR_TIM8EN, lp)
-
-/**
- * @brief Resets the TIM8 peripheral.
- *
- * @api
- */
-#define rccResetTIM8() rccResetAPB2(RCC_APB2RSTR_TIM8RST)
-/** @} */
-
-/**
- * @name USART/UART peripherals specific RCC operations
- * @{
- */
-/**
- * @brief Enables the USART1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUSART1(lp) rccEnableAPB2(RCC_APB2ENR_USART1EN, lp)
-
-/**
- * @brief Disables the USART1 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUSART1(lp) rccDisableAPB2(RCC_APB2ENR_USART1EN, lp)
-
-/**
- * @brief Resets the USART1 peripheral.
- *
- * @api
- */
-#define rccResetUSART1() rccResetAPB2(RCC_APB2RSTR_USART1RST)
-
-/**
- * @brief Enables the USART2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUSART2(lp) rccEnableAPB1(RCC_APB1ENR_USART2EN, lp)
-
-/**
- * @brief Disables the USART2 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUSART2(lp) rccDisableAPB1(RCC_APB1ENR_USART2EN, lp)
-
-/**
- * @brief Resets the USART2 peripheral.
- *
- * @api
- */
-#define rccResetUSART2() rccResetAPB1(RCC_APB1RSTR_USART2RST)
-
-/**
- * @brief Enables the USART3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUSART3(lp) rccEnableAPB1(RCC_APB1ENR_USART3EN, lp)
-
-/**
- * @brief Disables the USART3 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUSART3(lp) rccDisableAPB1(RCC_APB1ENR_USART3EN, lp)
-
-/**
- * @brief Resets the USART3 peripheral.
- *
- * @api
- */
-#define rccResetUSART3() rccResetAPB1(RCC_APB1RSTR_USART3RST)
-
-/**
- * @brief Enables the UART4 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUART4(lp) rccEnableAPB1(RCC_APB1ENR_UART4EN, lp)
-
-/**
- * @brief Disables the UART4 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUART4(lp) rccDisableAPB1(RCC_APB1ENR_UART4EN, lp)
-
-/**
- * @brief Resets the UART4 peripheral.
- *
- * @api
- */
-#define rccResetUART4() rccResetAPB1(RCC_APB1RSTR_UART4RST)
-
-/**
- * @brief Enables the UART5 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUART5(lp) rccEnableAPB1(RCC_APB1ENR_UART5EN, lp)
-
-/**
- * @brief Disables the UART5 peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUART5(lp) rccDisableAPB1(RCC_APB1ENR_UART5EN, lp)
-
-/**
- * @brief Resets the UART5 peripheral.
- *
- * @api
- */
-#define rccResetUART5() rccResetAPB1(RCC_APB1RSTR_UART5RST)
-/** @} */
-
-/**
- * @name USB peripheral specific RCC operations
- * @{
- */
-/**
- * @brief Enables the USB peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccEnableUSB(lp) rccEnableAPB1(RCC_APB1ENR_USBEN, lp)
-
-/**
- * @brief Disables the USB peripheral clock.
- * @note The @p lp parameter is ignored in this family.
- *
- * @param[in] lp low power enable flag
- *
- * @api
- */
-#define rccDisableUSB(lp) rccDisableAPB1(RCC_APB1ENR_USBEN, lp)
-
-/**
- * @brief Resets the USB peripheral.
- *
- * @api
- */
-#define rccResetUSB() rccResetAPB1(RCC_APB1RSTR_USBRST)
-/** @} */
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _STM32_RCC_ */
-
-/** @} */
|