1 files changed, 17 insertions, 16 deletions
diff --git a/os/hal/platforms/MSP430/pal_lld.c b/os/hal/platforms/MSP430/pal_lld.c
index 9a8cf5605..419b1ca82 100644
--- a/os/hal/platforms/MSP430/pal_lld.c
+++ b/os/hal/platforms/MSP430/pal_lld.c
@@ -18,8 +18,9 @@
 */
 
 /**
- * @file MSP430/pal_lld.c
- * @brief MSP430 Digital I/O low level driver code.
+ * @file    MSP430/pal_lld.c
+ * @brief   MSP430 Digital I/O low level driver code.
+ *
  * @addtogroup MSP430_PAL
  * @{
  */
@@ -50,12 +51,13 @@
 /*===========================================================================*/
 
 /**
- * @brief MSP430 I/O ports configuration.
+ * @brief   MSP430 I/O ports configuration.
+ * @note    The @p PxIFG, @p PxIE and @p PxSEL registers are cleared. @p PxOUT
+ *          and @p PxDIR are configured as specified.
  *
  * @param[in] config the MSP430 ports configuration
  *
- * @note The @p PxIFG, @p PxIE and @p PxSEL registers are cleared. @p PxOUT
- *       and @p PxDIR are configured as specified.
+ * @notapi
  */
 void _pal_lld_init(const PALConfig *config) {
 
@@ -101,21 +103,20 @@ void _pal_lld_init(const PALConfig *config) {
 }
 
 /**
- * @brief Pads mode setup.
+ * @brief   Pads mode setup.
  * @details This function programs a pads group belonging to the same port
  *          with the specified mode.
+ * @note    @p PAL_MODE_UNCONNECTED is implemented as output as recommended by
+ *          the MSP430x1xx Family User's Guide. Unconnected pads are set to
+ *          high logic state by default.
+ * @note    This function does not alter the @p PxSEL registers. Alternate
+ *          functions setup must be handled by device-specific code.
  *
- * @param[in] port the port identifier
- * @param[in] mask the group mask
- * @param[in] mode the mode
+ * @param[in] port      the port identifier
+ * @param[in] mask      the group mask
+ * @param[in] mode      the mode
  *
- * @note This function is not meant to be invoked directly by the application
- *       code.
- * @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by
- *       the MSP430x1xx Family User's Guide. Unconnected pads are set to
- *       high logic state by default.
- * @note This function does not alter the @p PxSEL registers. Alternate
- *       functions setup must be handled by device-specific code.
+ * @notapi
  */
 void _pal_lld_setgroupmode(ioportid_t port,
                            ioportmask_t mask,