diff options
Diffstat (limited to 'os/hal/platforms/LPC11xx/hal_lld.c')
| -rw-r--r-- | os/hal/platforms/LPC11xx/hal_lld.c | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/os/hal/platforms/LPC11xx/hal_lld.c b/os/hal/platforms/LPC11xx/hal_lld.c new file mode 100644 index 000000000..976fed23b --- /dev/null +++ b/os/hal/platforms/LPC11xx/hal_lld.c @@ -0,0 +1,132 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file LPC111x/hal_lld.c
+ * @brief LPC111x HAL subsystem low level driver source.
+ *
+ * @addtogroup LPC111x_HAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+/**
+ * @brief Register missing in NXP header file. + */
+#define FLASHCFG (*((volatile uint32_t *)0x4003C010))
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ */
+const PALConfig pal_default_config = {
+ {VAL_GPIO0DATA, VAL_GPIO0DIR},
+ {VAL_GPIO1DATA, VAL_GPIO1DIR},
+ {VAL_GPIO2DATA, VAL_GPIO2DIR},
+ {VAL_GPIO3DATA, VAL_GPIO3DIR},
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ */
+void hal_lld_init(void) {
+
+ /* SysTick initialization using the system clock.*/
+ NVICSetSystemHandlerPriority(HANDLER_SYSTICK, CORTEX_PRIORITY_SYSTICK);
+ SysTick->LOAD = LPC11xx_SYSCLK / CH_FREQUENCY - 1;
+ SysTick->VAL = 0;
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk |
+ SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief LPC111x clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ */
+void lpc111x_clock_init(void) {
+ unsigned i;
+
+ /* Flash wait states setting, the code takes care to not touch TBD bits.*/
+ FLASHCFG = (FLASHCFG & ~3) | LPC11xx_FLASHCFG_FLASHTIM;
+
+ /* System oscillator initialization if required.*/
+#if LPC11xx_MAINCLK_SOURCE == SYSMAINCLKSEL_PLLOUT
+#if LPC11xx_PLLCLK_SOURCE == SYSPLLCLKSEL_SYSOSC
+ LPC_SYSCON->SYSOSCCTRL = LPC11xx_SYSOSCCTRL;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* System oscillator ON. */
+ for (i = 0; i < 200; i++)
+ __NOP(); /* Stabilization delay. */
+#endif /* LPC11xx_PLLCLK_SOURCE == SYSPLLCLKSEL_SYSOSC */
+
+ /* PLL initialization if required.*/
+ LPC_SYSCON->SYSPLLCLKSEL = LPC11xx_PLLCLK_SOURCE;
+ LPC_SYSCON->SYSPLLCLKUEN = 1; /* Really required? */
+ LPC_SYSCON->SYSPLLCLKUEN = 0;
+ LPC_SYSCON->SYSPLLCLKUEN = 1;
+ LPC_SYSCON->SYSPLLCTRL = LPC11xx_SYSPLLCTRL_MSEL | LPC11xx_SYSPLLCTRL_PSEL;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* System PLL ON. */
+ while ((LPC_SYSCON->SYSPLLSTAT & 1) == 0) /* Wait PLL lock. */
+ ;
+#endif /* LPC11xx_MAINCLK_SOURCE == SYSMAINCLKSEL_PLLOUT */
+
+ /* Main clock source selection.*/
+ LPC_SYSCON->MAINCLKSEL = LPC11xx_MAINCLK_SOURCE;
+ LPC_SYSCON->MAINCLKUEN = 1; /* Really required? */
+ LPC_SYSCON->MAINCLKUEN = 0;
+ LPC_SYSCON->MAINCLKUEN = 1;
+ while ((LPC_SYSCON->MAINCLKUEN & 1) == 0) /* Wait switch completion. */
+ ;
+
+ /* ABH divider initialization, peripheral clocks are initially disabled,
+ the various device drivers will handle their own setup except GPIO and
+ IOCON that are left enabled.*/
+ LPC_SYSCON->SYSAHBCLKDIV = LPC11xx_SYSABHCLK_DIV;
+ LPC_SYSCON->SYSAHBCLKCTRL = 0x0001005F;
+
+ /* Peripheral clock dividers initialization.*/
+ LPC_SYSCON->UARTCLKDIV = LPC11xx_UART_PCLK_DIV;
+
+ /* Memory remapping, vectors always in ROM.*/
+ LPC_SYSCON->SYSMEMREMAP = 2;
+}
+
+/** @} */
|