diff options
Diffstat (limited to 'os/hal/boards')
| -rw-r--r-- | os/hal/boards/ST_STM32373C_EVAL/board.c | 153 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32373C_EVAL/board.h | 23 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F0_DISCOVERY/board.c | 175 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F0_DISCOVERY/board.h | 23 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F3_DISCOVERY/board.c | 153 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F3_DISCOVERY/board.h | 23 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F4_DISCOVERY/board.c | 143 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32F4_DISCOVERY/board.h | 23 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32L053_DISCOVERY/board.c | 153 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32L053_DISCOVERY/board.h | 23 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32L_DISCOVERY/board.c | 153 | ||||
| -rw-r--r-- | os/hal/boards/ST_STM32L_DISCOVERY/board.h | 25 |
12 files changed, 1022 insertions, 48 deletions
diff --git a/os/hal/boards/ST_STM32373C_EVAL/board.c b/os/hal/boards/ST_STM32373C_EVAL/board.c index 52b14f7e2..753ef0076 100644 --- a/os/hal/boards/ST_STM32373C_EVAL/board.c +++ b/os/hal/boards/ST_STM32373C_EVAL/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of STM32 GPIO port setup.
+ */
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief STM32 GPIO static initialization data.
*/
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -62,18 +124,92 @@ const PALConfig pal_default_config = { #endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+ {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+ VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+ {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+ VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetAHB(STM32_GPIO_EN_MASK);
+ rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
@@ -126,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32373C_EVAL/board.h b/os/hal/boards/ST_STM32373C_EVAL/board.h index e7e42e0fb..aaa8acbc0 100644 --- a/os/hal/boards/ST_STM32373C_EVAL/board.h +++ b/os/hal/boards/ST_STM32373C_EVAL/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for STMicroelectronics STM32373C-EVAL board.
*/
@@ -249,6 +253,22 @@ +/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -1207,6 +1227,9 @@ PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
PIN_AFIO_AF(GPIOH_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
diff --git a/os/hal/boards/ST_STM32F0_DISCOVERY/board.c b/os/hal/boards/ST_STM32F0_DISCOVERY/board.c index 92f2d10ef..753ef0076 100644 --- a/os/hal/boards/ST_STM32F0_DISCOVERY/board.c +++ b/os/hal/boards/ST_STM32F0_DISCOVERY/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief Type of STM32 GPIO port setup.
*/
-const PALConfig pal_default_config = {
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
+
+/**
+ * @brief STM32 GPIO static initialization data.
+ */
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -62,21 +124,117 @@ const PALConfig pal_default_config = { #endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+ {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+ VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+ {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+ VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetAHB(STM32_GPIO_EN_MASK);
+ rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif /* HAL_USE_SDC */
+
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
@@ -104,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32F0_DISCOVERY/board.h b/os/hal/boards/ST_STM32F0_DISCOVERY/board.h index 4887327b1..fbb5b839c 100644 --- a/os/hal/boards/ST_STM32F0_DISCOVERY/board.h +++ b/os/hal/boards/ST_STM32F0_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for ST STM32F0-Discovery board.
*/
@@ -159,6 +163,22 @@ #define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -766,6 +786,9 @@ PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
diff --git a/os/hal/boards/ST_STM32F3_DISCOVERY/board.c b/os/hal/boards/ST_STM32F3_DISCOVERY/board.c index 52b14f7e2..753ef0076 100644 --- a/os/hal/boards/ST_STM32F3_DISCOVERY/board.c +++ b/os/hal/boards/ST_STM32F3_DISCOVERY/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of STM32 GPIO port setup.
+ */
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief STM32 GPIO static initialization data.
*/
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -62,18 +124,92 @@ const PALConfig pal_default_config = { #endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+ {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+ VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+ {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+ VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetAHB(STM32_GPIO_EN_MASK);
+ rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
@@ -126,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32F3_DISCOVERY/board.h b/os/hal/boards/ST_STM32F3_DISCOVERY/board.h index 1834ddbcc..df7629a60 100644 --- a/os/hal/boards/ST_STM32F3_DISCOVERY/board.h +++ b/os/hal/boards/ST_STM32F3_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for STMicroelectronics STM32F3-Discovery board.
*/
@@ -244,6 +248,22 @@ +/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -1202,6 +1222,9 @@ PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
PIN_AFIO_AF(GPIOH_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
diff --git a/os/hal/boards/ST_STM32F4_DISCOVERY/board.c b/os/hal/boards/ST_STM32F4_DISCOVERY/board.c index 65b74d0c6..8544deb1b 100644 --- a/os/hal/boards/ST_STM32F4_DISCOVERY/board.c +++ b/os/hal/boards/ST_STM32F4_DISCOVERY/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of STM32 GPIO port setup.
+ */
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief STM32 GPIO static initialization data.
*/
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -73,15 +135,81 @@ const PALConfig pal_default_config = { VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetAHB1(STM32_GPIO_EN_MASK);
+ rccEnableAHB1(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
@@ -134,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32F4_DISCOVERY/board.h b/os/hal/boards/ST_STM32F4_DISCOVERY/board.h index 91e5d6ebd..9ccc2cf24 100644 --- a/os/hal/boards/ST_STM32F4_DISCOVERY/board.h +++ b/os/hal/boards/ST_STM32F4_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for STMicroelectronics STM32F4-Discovery board.
*/
@@ -254,6 +258,22 @@ #define LINE_OSC_OUT PAL_LINE(GPIOH, 1U)
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -1329,6 +1349,9 @@ PIN_AFIO_AF(GPIOI_PIN14, 0U) | \
PIN_AFIO_AF(GPIOI_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
diff --git a/os/hal/boards/ST_STM32L053_DISCOVERY/board.c b/os/hal/boards/ST_STM32L053_DISCOVERY/board.c index 52b14f7e2..22908902f 100644 --- a/os/hal/boards/ST_STM32L053_DISCOVERY/board.c +++ b/os/hal/boards/ST_STM32L053_DISCOVERY/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of STM32 GPIO port setup.
+ */
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief STM32 GPIO static initialization data.
*/
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -62,18 +124,92 @@ const PALConfig pal_default_config = { #endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+ {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+ VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+ {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+ VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetIOP(STM32_GPIO_EN_MASK);
+ rccEnableIOP(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
@@ -126,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32L053_DISCOVERY/board.h b/os/hal/boards/ST_STM32L053_DISCOVERY/board.h index 9d046769f..c3bf67534 100644 --- a/os/hal/boards/ST_STM32L053_DISCOVERY/board.h +++ b/os/hal/boards/ST_STM32L053_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for STMicroelectronics STM32L053-Discovery board.
*/
@@ -183,6 +187,22 @@ +/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -790,6 +810,9 @@ PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
PIN_AFIO_AF(GPIOH_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
diff --git a/os/hal/boards/ST_STM32L_DISCOVERY/board.c b/os/hal/boards/ST_STM32L_DISCOVERY/board.c index 52b14f7e2..753ef0076 100644 --- a/os/hal/boards/ST_STM32L_DISCOVERY/board.c +++ b/os/hal/boards/ST_STM32L_DISCOVERY/board.c @@ -20,14 +20,76 @@ */
#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of STM32 GPIO port setup.
+ */
+typedef struct {
+ uint32_t moder;
+ uint32_t otyper;
+ uint32_t ospeedr;
+ uint32_t pupdr;
+ uint32_t odr;
+ uint32_t afrl;
+ uint32_t afrh;
+} gpio_setup_t;
+
+/**
+ * @brief Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+ gpio_setup_t PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+ gpio_setup_t PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+ gpio_setup_t PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+ gpio_setup_t PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+ gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+ gpio_setup_t PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+ gpio_setup_t PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+ gpio_setup_t PKData;
+#endif
+} gpio_config_t;
-#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
+ * @brief STM32 GPIO static initialization data.
*/
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
@@ -62,18 +124,92 @@ const PALConfig pal_default_config = { #endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+ {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+ VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+ {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+ VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+ /* Enabling GPIO-related clocks, the mask comes from the
+ registry header file.*/
+ rccResetAHB(STM32_GPIO_EN_MASK);
+ rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+ /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+ gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+ gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+ gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+ gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+ gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+ gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+ gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+ gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+ gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
+#if STM32_HAS_GPIOJ
+ gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+ gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
/**
* @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ * else.
*/
void __early_init(void) {
+ stm32_gpio_init();
stm32_clock_init();
}
@@ -126,4 +262,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) { * @todo Add your board-specific code, if any.
*/
void boardInit(void) {
+
}
diff --git a/os/hal/boards/ST_STM32L_DISCOVERY/board.h b/os/hal/boards/ST_STM32L_DISCOVERY/board.h index 441e6d380..de7a8b749 100644 --- a/os/hal/boards/ST_STM32L_DISCOVERY/board.h +++ b/os/hal/boards/ST_STM32L_DISCOVERY/board.h @@ -22,6 +22,10 @@ #ifndef BOARD_H
#define BOARD_H
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
/*
* Setup for ST STM32L-Discovery board.
*/
@@ -47,7 +51,7 @@ #define STM32_HSE_BYPASS
/*
- * MCU type as defined in the ST header file stm32l1xx.h.
+ * MCU type as defined in the ST header.
*/
#define STM32L152xB
@@ -178,6 +182,22 @@ #define LINE_OSC_IN PAL_LINE(GPIOH, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U)
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
@@ -902,6 +922,9 @@ PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
PIN_AFIO_AF(GPIOH_PIN15, 0U))
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
|