1 files changed, 93 insertions, 0 deletions
diff --git a/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h b/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h
new file mode 100644
index 000000000..1bb61e40c
--- /dev/null
+++ b/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h
@@ -0,0 +1,93 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the Studiel AT91SAM7A3-EK board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_STUDIEL_AT91SAM7A3_EK
+#define BOARD_NAME "Studiel AT91SAM7A3-EK eval. board"
+
+/*
+ * Select your platform by modifying the following line.
+ */
+#if !defined(SAM7A3_PLATFORM)
+#define SAM7_PLATFORM   SAM7A3
+#endif
+
+#include "at91sam7.h"
+
+#define CLK             18432000
+#define MCK             48054857
+
+/*
+ * I/O definitions.
+ */
+#define PIOA_RXD0               2
+#define PIOA_RXD0_MASK          (1 << PIOA_RXD0)
+#define PIOA_TXD0               3
+#define PIOA_TXD0_MASK          (1 << PIOA_TXD0)
+#define PIOA_LED1               20
+#define PIOA_LED1_MASK          (1 << PIOA_LED1)
+#define PIOA_LED2               21
+#define PIOA_LED2_MASK          (1 << PIOA_LED2)
+#define PIOA_LED3               24
+#define PIOA_LED3_MASK          (1 << PIOA_LED3)
+#define PIOA_LED4               25
+#define PIOA_LED4_MASK          (1 << PIOA_LED4)
+// mmc-spi
+#define PIOA_SPI0_NSS           14
+#define PIOA_SPI0_NSS_MASK      (1 << PIOA_SPI0_NSS)
+#define PIOA_SPI0_MISO          15
+#define PIOA_SPI0_MISO_MASK     (1 << PIOA_SPI0_MISO)
+#define PIOA_SPI0_MOSI          16
+#define PIOA_SPI0_MOSI_MASK     (1 << PIOA_SPI0_MOSI)
+#define PIOA_SPI0_CLK           17
+#define PIOA_SPI0_CLK_MASK      (1 << PIOA_SPI0_CLK)
+
+/*
+ * Initial I/O setup.
+ */
+/* Output data. */
+#define VAL_PIOA_ODSR           0x00000000
+/* Direction. */
+#define VAL_PIOA_OSR            0x00000000 | PIOA_LED1_MASK | PIOA_LED2_MASK | \
+                                             PIOA_LED3_MASK | PIOA_LED4_MASK
+/* Pull-up. */
+#define VAL_PIOA_PUSR           0xFFFFFFFF
+
+#define VAL_PIOB_ODSR           0x00000000      /* Output data. */
+#define VAL_PIOB_OSR            0x00000000      /* Direction. */
+#define VAL_PIOB_PUSR           0xFFFFFFFF      /* Pull-up. */
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */