4 files changed, 18 insertions, 16 deletions
diff --git a/demos/ARMCM3-STM32F107-GCC/Makefile b/demos/ARMCM3-STM32F107-GCC/Makefile
index dc4ebeeeb..9a7631be9 100644
--- a/demos/ARMCM3-STM32F107-GCC/Makefile
+++ b/demos/ARMCM3-STM32F107-GCC/Makefile
@@ -57,7 +57,7 @@ LDSCRIPT= ch.ld
 
 # Imported source files
 CHIBIOS = ../..
-include $(CHIBIOS)/boards/ST_STM3210C_EVAL/board.mk
+include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk
 include $(CHIBIOS)/os/hal/platforms/STM32/platform.mk
 include $(CHIBIOS)/os/hal/hal.mk
 include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32/port.mk
diff --git a/demos/ARMCM3-STM32F107-GCC/main.c b/demos/ARMCM3-STM32F107-GCC/main.c
index 73bc0b402..418966941 100644
--- a/demos/ARMCM3-STM32F107-GCC/main.c
+++ b/demos/ARMCM3-STM32F107-GCC/main.c
@@ -22,19 +22,18 @@
 #include "test.h"
 
 /*
- * Red LED blinker thread, times are in milliseconds.
+ * Green LED blinker thread, times are in milliseconds.
  */
 static WORKING_AREA(waThread1, 128);
 static msg_t Thread1(void *arg) {
 
   (void)arg;
   while (TRUE) {
-    palClearPad(IOPORT4, 7);
+    palClearPad(GPIOC, GPIOC_LED_STATUS1);
     chThdSleepMilliseconds(500);
-    palSetPad(IOPORT4, 7);
+    palSetPad(GPIOC, GPIOC_LED_STATUS1);
     chThdSleepMilliseconds(500);
   }
-  return 0;
 }
 
 /*
@@ -55,7 +54,7 @@ int main(void) {
   /*
    * Activates the serial driver 2 using the driver default configuration.
    */
-  sdStart(&SD2, NULL);
+  sdStart(&SD3, NULL);
 
   /*
    * Creates the blinker thread.
@@ -67,8 +66,8 @@ int main(void) {
    * sleeping in a loop and check the button state.
    */
   while (TRUE) {
-    if (palReadPad(IOPORT2, 9) == 0)
-      TestThread(&SD2);
+    if (palReadPad(GPIOC, GPIOC_SWITCH_TAMPER) == 0)
+      TestThread(&SD3);
     chThdSleepMilliseconds(500);
   }
   return 0;
diff --git a/demos/ARMCM3-STM32F107-GCC/mcuconf.h b/demos/ARMCM3-STM32F107-GCC/mcuconf.h
index f3e7ad40b..3c741ceb8 100644
--- a/demos/ARMCM3-STM32F107-GCC/mcuconf.h
+++ b/demos/ARMCM3-STM32F107-GCC/mcuconf.h
@@ -94,8 +94,8 @@
  * SERIAL driver system settings.
  */
 #define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             TRUE
-#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             TRUE
 #define STM32_SERIAL_USE_UART4              FALSE
 #define STM32_SERIAL_USE_UART5              FALSE
 #define STM32_SERIAL_USART1_PRIORITY        12
@@ -107,9 +107,9 @@
 /*
  * SPI driver system settings.
  */
-#define STM32_SPI_USE_SPI1                  TRUE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  TRUE
 #define STM32_SPI_SPI1_DMA_PRIORITY         2
 #define STM32_SPI_SPI2_DMA_PRIORITY         2
 #define STM32_SPI_SPI3_DMA_PRIORITY         2
diff --git a/demos/ARMCM3-STM32F107-GCC/readme.txt b/demos/ARMCM3-STM32F107-GCC/readme.txt
index 959a23363..f535df8b4 100644
--- a/demos/ARMCM3-STM32F107-GCC/readme.txt
+++ b/demos/ARMCM3-STM32F107-GCC/readme.txt
@@ -4,15 +4,18 @@
 
 ** TARGET **
 
-The demo runs on an ST STM3210C-EVAL board.
+The demo runs on an Olimex STM32-P107 board.
 
 ** The Demo **
 
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD3 (USART3).
 
 ** Build Procedure **
 
-The demo has been tested by using the free Codesourcery GCC-based toolchain,
-YAGARTO and an experimental WinARM build including GCC 4.3.0.
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
 Just modify the TRGT line in the makefile in order to use different GCC ports.
 
 ** Notes **