diff options
25 files changed, 5443 insertions, 0 deletions
diff --git a/os/ex/ST/lsm303dlhc.c b/os/ex/ST/lsm303dlhc.c new file mode 100644 index 000000000..2722ff9e8 --- /dev/null +++ b/os/ex/ST/lsm303dlhc.c @@ -0,0 +1,905 @@ +/* + ChibiOS - Copyright (C) 2016 Rocco Marco Guglielmi + + This file is part of ChibiOS. + + ChibiOS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +*/ + +/** + * @file lsm303dlhc.c + * @brief LSM303DLHC MEMS interface module code. + * + * @addtogroup lsm303dlhc + * @{ + */ + +#include "hal.h" + +#include "lsm303dlhc.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#define LSM303DLHC_ACC_SENS_2G ((float)0.0610f) +#define LSM303DLHC_ACC_SENS_4G ((float)0.1221f) +#define LSM303DLHC_ACC_SENS_8G ((float)0.2442f) +#define LSM303DLHC_ACC_SENS_16G ((float)0.4884f) + +#define LSM303DLHC_COMP_SENS_XY_1_3GA ((float)1100.0f) +#define LSM303DLHC_COMP_SENS_XY_1_9GA ((float)855.0f) +#define LSM303DLHC_COMP_SENS_XY_2_5GA ((float)670.0f) +#define LSM303DLHC_COMP_SENS_XY_4_0GA ((float)450.0f) +#define LSM303DLHC_COMP_SENS_XY_4_7GA ((float)400.0f) +#define LSM303DLHC_COMP_SENS_XY_5_6GA ((float)330.0f) +#define LSM303DLHC_COMP_SENS_XY_8_1GA ((float)230.0f) + +#define LSM303DLHC_COMP_SENS_Z_1_3GA ((float)980.0f) +#define LSM303DLHC_COMP_SENS_Z_1_9GA ((float)765.0f) +#define LSM303DLHC_COMP_SENS_Z_2_5GA ((float)600.0f) +#define LSM303DLHC_COMP_SENS_Z_4_0GA ((float)400.0f) +#define LSM303DLHC_COMP_SENS_Z_4_7GA ((float)355.0f) +#define LSM303DLHC_COMP_SENS_Z_5_6GA ((float)295.0f) +#define LSM303DLHC_COMP_SENS_Z_8_1GA ((float)205.0f) + +#define LSM303DLHC_DI ((uint8_t)0xFF) +#define LSM303DLHC_DI_0 ((uint8_t)0x01) +#define LSM303DLHC_DI_1 ((uint8_t)0x02) +#define LSM303DLHC_DI_2 ((uint8_t)0x04) +#define LSM303DLHC_DI_3 ((uint8_t)0x08) +#define LSM303DLHC_DI_4 ((uint8_t)0x10) +#define LSM303DLHC_DI_5 ((uint8_t)0x20) +#define LSM303DLHC_DI_6 ((uint8_t)0x40) +#define LSM303DLHC_DI_7 ((uint8_t)0x80) + +#define LSM303DLHC_AD_0 ((uint8_t)0x01) +#define LSM303DLHC_AD_1 ((uint8_t)0x02) +#define LSM303DLHC_AD_2 ((uint8_t)0x04) +#define LSM303DLHC_AD_3 ((uint8_t)0x08) +#define LSM303DLHC_AD_4 ((uint8_t)0x10) +#define LSM303DLHC_AD_5 ((uint8_t)0x20) +#define LSM303DLHC_AD_6 ((uint8_t)0x40) + +#define LSM303DLHC_RW ((uint8_t)0x80) + +#define LSM303DLHC_AD_ACC_CTRL_REG1 ((uint8_t)0x20) +#define LSM303DLHC_AD_ACC_CTRL_REG2 ((uint8_t)0x21) +#define LSM303DLHC_AD_ACC_CTRL_REG3 ((uint8_t)0x22) +#define LSM303DLHC_AD_ACC_CTRL_REG4 ((uint8_t)0x23) +#define LSM303DLHC_AD_ACC_CTRL_REG5 ((uint8_t)0x24) +#define LSM303DLHC_AD_ACC_CTRL_REG6 ((uint8_t)0x25) +#define LSM303DLHC_AD_ACC_REFERENCE ((uint8_t)0x26) +#define LSM303DLHC_AD_ACC_STATUS_REG ((uint8_t)0x27) +#define LSM303DLHC_AD_ACC_OUT_X_L ((uint8_t)0x28) +#define LSM303DLHC_AD_ACC_OUT_X_H ((uint8_t)0x29) +#define LSM303DLHC_AD_ACC_OUT_Y_L ((uint8_t)0x2A) +#define LSM303DLHC_AD_ACC_OUT_Y_H ((uint8_t)0x2B) +#define LSM303DLHC_AD_ACC_OUT_Z_L ((uint8_t)0x2C) +#define LSM303DLHC_AD_ACC_OUT_Z_H ((uint8_t)0x2D) +#define LSM303DLHC_AD_ACC_FIFO_CTRL_REG ((uint8_t)0x2E) +#define LSM303DLHC_AD_ACC_FIFO_SRC_REG ((uint8_t)0x2F) +#define LSM303DLHC_AD_ACC_INT1_CFG ((uint8_t)0x30) +#define LSM303DLHC_AD_ACC_INT1_SRC ((uint8_t)0x31) +#define LSM303DLHC_AD_ACC_INT1_THS ((uint8_t)0x32) +#define LSM303DLHC_AD_ACC_INT1_DURATION ((uint8_t)0x33) +#define LSM303DLHC_AD_ACC_INT2_CFG ((uint8_t)0x34) +#define LSM303DLHC_AD_ACC_INT2_SRC ((uint8_t)0x35) +#define LSM303DLHC_AD_ACC_INT2_THS ((uint8_t)0x36) +#define LSM303DLHC_AD_ACC_INT2_DURATION ((uint8_t)0x37) +#define LSM303DLHC_AD_ACC_CLICK_CFG ((uint8_t)0x38) +#define LSM303DLHC_AD_ACC_CLICK_SRC ((uint8_t)0x39) +#define LSM303DLHC_AD_ACC_CLICK_THS ((uint8_t)0x3A) +#define LSM303DLHC_AD_ACC_TIME_LIMIT ((uint8_t)0x3B) +#define LSM303DLHC_AD_ACC_TIME_LATENCY ((uint8_t)0x3C) +#define LSM303DLHC_AD_ACC_TIME_WINDOW ((uint8_t)0x3D) +#define LSM303DLHC_AD_COMP_CRA_REG ((uint8_t)0x00) +#define LSM303DLHC_AD_COMP_CRB_REG ((uint8_t)0x01) +#define LSM303DLHC_AD_COMP_MR_REG ((uint8_t)0x02) +#define LSM303DLHC_AD_COMP_OUT_X_H ((uint8_t)0x03) +#define LSM303DLHC_AD_COMP_OUT_X_L ((uint8_t)0x04) +#define LSM303DLHC_AD_COMP_OUT_Z_H ((uint8_t)0x05) +#define LSM303DLHC_AD_COMP_OUT_Z_L ((uint8_t)0x06) +#define LSM303DLHC_AD_COMP_OUT_Y_H ((uint8_t)0x07) +#define LSM303DLHC_AD_COMP_OUT_Y_L ((uint8_t)0x08) +#define LSM303DLHC_AD_COMP_SR_REG ((uint8_t)0x09) +#define LSM303DLHC_AD_COMP_IRA_REG ((uint8_t)0x0A) +#define LSM303DLHC_AD_COMP_IRB_REG ((uint8_t)0x0B) +#define LSM303DLHC_AD_COMP_IRC_REG ((uint8_t)0x0C) +#define LSM303DLHC_AD_COMP_TEMP_OUT_H ((uint8_t)0x31) +#define LSM303DLHC_AD_COMP_TEMP_OUT_L ((uint8_t)0x32) + +#define LSM303DLHC_ACC_CTRL_REG4_FS_MASK ((uint8_t)0x30) +#define LSM303DLHC_COMP_CTRL_REGB_FS_MASK ((uint8_t)0xE0) + +#define TO_G ((float)0.001f) +#define TO_SI ((float)0.00981f) +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Accelerometer Power Mode + */ +typedef enum { + LSM303DLHC_ACC_PM_NORMAL = 0x00, /**< Normal mode enabled */ + LSM303DLHC_ACC_PM_LP = 0x08 /**< Low Power mode enabled */ +} lsm303dlhc_acc_pm_t; + +/** + * @brief Accelerometer and Compass Slave Address. + */ +typedef enum { + LSM303DLHC_SAD_ACC = 0x19, /**< SAD for accelerometer. */ + LSM303DLHC_SAD_COMP = 0x1E /**< SAD for compass. */ +} lsm303dlhc_sad_t; +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +#if (LSM303DLHC_USE_I2C) || defined(__DOXYGEN__) +/** + * @brief Reads registers value using I2C. + * @pre The I2C interface must be initialized and the driver started. + * @note IF_ADD_INC bit must be 1 in CTRL_REG8 + * + * @param[in] i2cp pointer to the I2C interface + * @param[in] sad slave address without R bit + * @param[in] reg first sub-register address + * @return the read value. + */ +uint8_t lsm303dlhcI2CReadRegister(I2CDriver *i2cp, lsm303dlhc_sad_t sad, uint8_t reg, + msg_t* msgp) { + msg_t msg; +#if defined(STM32F103_MCUCONF) + uint8_t rxbuf[2]; + msg = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, + TIME_INFINITE); + if(msgp != NULL){ + *msgp = msg; + } + return rxbuf[0]; +#else + uint8_t txbuf, rxbuf; + txbuf = reg; + msg = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, &rxbuf, 1, + TIME_INFINITE); + if(msgp != NULL){ + *msgp = msg; + } + return rxbuf; +#endif +} + +/** + * @brief Writes a value into a register using I2C. + * @pre The I2C interface must be initialized and the driver started. + * + * @param[in] i2cp pointer to the I2C interface + * @param[in] sad slave address without R bit + * @param[in] sub sub-register address + * @param[in] value the value to be written + * @return the operation status. + */ +msg_t lsm303dlhcI2CWriteRegister(I2CDriver *i2cp, lsm303dlhc_sad_t sad, uint8_t reg, + uint8_t value) { + uint8_t rxbuf; + uint8_t txbuf[2]; + if(sad == LSM303DLHC_SAD_ACC) { + switch (reg) { + default: + /* Reserved register must not be written, according to the datasheet + * this could permanently damage the device. + */ + osalDbgAssert(FALSE, "lsm303dlhcWriteRegisterI2C(), reserved register"); + case LSM303DLHC_AD_ACC_STATUS_REG: + case LSM303DLHC_AD_ACC_OUT_X_L: + case LSM303DLHC_AD_ACC_OUT_X_H: + case LSM303DLHC_AD_ACC_OUT_Y_L: + case LSM303DLHC_AD_ACC_OUT_Y_H: + case LSM303DLHC_AD_ACC_OUT_Z_L: + case LSM303DLHC_AD_ACC_OUT_Z_H: + case LSM303DLHC_AD_ACC_FIFO_SRC_REG: + case LSM303DLHC_AD_ACC_INT1_SRC: + case LSM303DLHC_AD_ACC_INT2_SRC: + /* Read only registers cannot be written, the command is ignored.*/ + return MSG_RESET; + case LSM303DLHC_AD_ACC_CTRL_REG1: + case LSM303DLHC_AD_ACC_CTRL_REG2: + case LSM303DLHC_AD_ACC_CTRL_REG3: + case LSM303DLHC_AD_ACC_CTRL_REG4: + case LSM303DLHC_AD_ACC_CTRL_REG5: + case LSM303DLHC_AD_ACC_CTRL_REG6: + case LSM303DLHC_AD_ACC_REFERENCE: + case LSM303DLHC_AD_ACC_FIFO_CTRL_REG: + case LSM303DLHC_AD_ACC_INT1_CFG: + case LSM303DLHC_AD_ACC_INT1_THS: + case LSM303DLHC_AD_ACC_INT1_DURATION: + case LSM303DLHC_AD_ACC_INT2_CFG: + case LSM303DLHC_AD_ACC_INT2_THS: + case LSM303DLHC_AD_ACC_INT2_DURATION: + case LSM303DLHC_AD_ACC_CLICK_CFG: + case LSM303DLHC_AD_ACC_CLICK_SRC: + case LSM303DLHC_AD_ACC_CLICK_THS: + case LSM303DLHC_AD_ACC_TIME_LIMIT: + case LSM303DLHC_AD_ACC_TIME_LATENCY: + case LSM303DLHC_AD_ACC_TIME_WINDOW: + txbuf[0] = reg; + txbuf[1] = value; + return i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); + break; + } + } + if(sad == LSM303DLHC_SAD_COMP) { + switch (reg) { + default: + /* Reserved register must not be written, according to the datasheet + * this could permanently damage the device. + */ + osalDbgAssert(FALSE, "lsm303dlhcWriteRegisterI2C(), reserved register"); + case LSM303DLHC_AD_COMP_OUT_X_H: + case LSM303DLHC_AD_COMP_OUT_X_L: + case LSM303DLHC_AD_COMP_OUT_Z_H: + case LSM303DLHC_AD_COMP_OUT_Z_L: + case LSM303DLHC_AD_COMP_OUT_Y_H: + case LSM303DLHC_AD_COMP_OUT_Y_L: + case LSM303DLHC_AD_COMP_SR_REG: + case LSM303DLHC_AD_COMP_IRA_REG: + case LSM303DLHC_AD_COMP_IRB_REG: + case LSM303DLHC_AD_COMP_IRC_REG: + case LSM303DLHC_AD_COMP_TEMP_OUT_H: + case LSM303DLHC_AD_COMP_TEMP_OUT_L: + /* Read only registers cannot be written, the command is ignored.*/ + return MSG_RESET; + case LSM303DLHC_AD_COMP_CRA_REG: + case LSM303DLHC_AD_COMP_CRB_REG: + case LSM303DLHC_AD_COMP_MR_REG: + txbuf[0] = reg; + txbuf[1] = value; + return i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); + break; + } + } + osalDbgAssert(FALSE, "lsm303dlhcWriteRegisterI2C(), wrong SAD"); + return MSG_RESET; +} +#endif /* LSM303DLHC_USE_I2C */ + +/* + * Interface implementation. + */ +static size_t acc_get_axes_number(void *ip) { + + osalDbgCheck(ip != NULL); + return LSM303DLHC_ACC_NUMBER_OF_AXES; +} + +static size_t comp_get_axes_number(void *ip) { + + osalDbgCheck(ip != NULL); + return LSM303DLHC_COMP_NUMBER_OF_AXES; +} + +static size_t sens_get_axes_number(void *ip) { + size_t size = 0; + + osalDbgCheck(ip != NULL); + if (((LSM303DLHCDriver *)ip)->config->acccfg != NULL) + size += acc_get_axes_number(ip); + if (((LSM303DLHCDriver *)ip)->config->compcfg != NULL) + size += comp_get_axes_number(ip); + return size; +} + +static msg_t acc_read_raw(void *ip, int32_t axes[]) { + int16_t tmp; + osalDbgCheck(((ip != NULL) && (axes != NULL)) && + (((LSM303DLHCDriver *)ip)->config->acccfg != NULL)); + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "acc_read_raw(), invalid state"); + +#if LSM303DLHC_USE_I2C + osalDbgAssert((((LSM303DLHCDriver *)ip)->config->i2cp->state == I2C_READY), + "acc_read_raw(), channel not ready"); +#if LSM303DLHC_SHARED_I2C + i2cAcquireBus(((LSM303DLHCDriver *)ip)->config->i2cp); + i2cStart(((LSM303DLHCDriver *)ip)->config->i2cp, + ((LSM303DLHCDriver *)ip)->config->i2ccfg); +#endif /* LSM303DLHC_SHARED_I2C */ + if(((LSM303DLHCDriver *)ip)->config->acccfg->axesenabling & LSM303DLHC_ACC_AE_X){ + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_X_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_X_H, NULL) << 8; + axes[0] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->accbias[0]; + } + if(((LSM303DLHCDriver *)ip)->config->acccfg->axesenabling & LSM303DLHC_ACC_AE_Y){ + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_Y_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_Y_H, NULL) << 8; + axes[1] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->accbias[1]; + } + if(((LSM303DLHCDriver *)ip)->config->acccfg->axesenabling & LSM303DLHC_ACC_AE_Z){ + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_Z_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_OUT_Z_H, NULL) << 8; + axes[2] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->accbias[2]; + } +#if LSM303DLHC_SHARED_I2C + i2cReleaseBus(((LSM303DLHCDriver *)ip)->config->i2cp); +#endif /* LSM303DLHC_SHARED_I2C */ +#endif /* LSM303DLHC_USE_I2C */ + return MSG_OK; +} + +static msg_t comp_read_raw(void *ip, int32_t axes[]) { + int16_t tmp; + osalDbgCheck(((ip != NULL) && (axes != NULL)) && + (((LSM303DLHCDriver *)ip)->config->compcfg != NULL)); + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "comp_read_raw(), invalid state"); + +#if LSM303DLHC_USE_I2C + osalDbgAssert((((LSM303DLHCDriver *)ip)->config->i2cp->state == I2C_READY), + "comp_read_raw(), channel not ready"); +#if LSM303DLHC_SHARED_I2C + i2cAcquireBus(((LSM303DLHCDriver *)ip)->config->i2cp); + i2cStart(((LSM303DLHCDriver *)ip)->config->i2cp, + ((LSM303DLHCDriver *)ip)->config->i2ccfg); +#endif /* LSM303DLHC_SHARED_I2C */ + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_X_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_X_H, NULL) << 8; + axes[0] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->compbias[0]; + + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_Y_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_Y_H, NULL) << 8; + axes[1] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->compbias[1]; + + tmp = lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_Z_L, NULL); + tmp += lsm303dlhcI2CReadRegister(((LSM303DLHCDriver *)ip)->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_OUT_Z_H, NULL) << 8; + axes[2] = (int32_t)tmp - ((LSM303DLHCDriver *)ip)->compbias[2]; +#if LSM303DLHC_SHARED_I2C + i2cReleaseBus(((LSM303DLHCDriver *)ip)->config->i2cp); +#endif /* LSM303DLHC_SHARED_I2C */ +#endif /* LSM303DLHC_USE_I2C */ + return MSG_OK; +} + +static msg_t sens_read_raw(void *ip, int32_t axes[]) { + int32_t* bp = axes; + msg_t msg; + if (((LSM303DLHCDriver *)ip)->config->acccfg != NULL) { + msg = acc_read_raw(ip, bp); + if(msg != MSG_OK) + return msg; + bp += LSM303DLHC_ACC_NUMBER_OF_AXES; + } + if (((LSM303DLHCDriver *)ip)->config->compcfg != NULL) { + msg = comp_read_raw(ip, bp); + } + return msg; +} + +static msg_t acc_read_cooked(void *ip, float axes[]) { + uint32_t i; + int32_t raw[LSM303DLHC_ACC_NUMBER_OF_AXES]; + msg_t msg; + + osalDbgCheck(((ip != NULL) && (axes != NULL)) && + (((LSM303DLHCDriver *)ip)->config->acccfg != NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "acc_read_cooked(), invalid state"); + + msg = acc_read_raw(ip, raw); + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES ; i++){ + axes[i] = raw[i] * ((LSM303DLHCDriver *)ip)->accsensitivity[i]; + if(((LSM303DLHCDriver *)ip)->config->acccfg->unit == LSM303DLHC_ACC_UNIT_G){ + axes[i] *= TO_G; + } + else if(((LSM303DLHCDriver *)ip)->config->acccfg->unit == LSM303DLHC_ACC_UNIT_SI){ + axes[i] *= TO_SI; + } + } + return msg; +} + +static msg_t comp_read_cooked(void *ip, float axes[]) { + uint32_t i; + int32_t raw[LSM303DLHC_COMP_NUMBER_OF_AXES]; + msg_t msg; + + osalDbgCheck(((ip != NULL) && (axes != NULL)) && + (((LSM303DLHCDriver *)ip)->config->compcfg != NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "comp_read_cooked(), invalid state"); + + msg = comp_read_raw(ip, raw); + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES ; i++){ + axes[i] = raw[i] / ((LSM303DLHCDriver *)ip)->compsensitivity[i]; + } + return msg; +} + +static msg_t sens_read_cooked(void *ip, float axes[]) { + float* bp = axes; + msg_t msg; + if (((LSM303DLHCDriver *)ip)->config->acccfg != NULL) { + msg = acc_read_cooked(ip, bp); + if(msg != MSG_OK) + return msg; + bp += LSM303DLHC_ACC_NUMBER_OF_AXES; + } + if (((LSM303DLHCDriver *)ip)->config->compcfg != NULL) { + msg = comp_read_cooked(ip, bp); + } + return msg; +} + +static msg_t acc_set_bias(void *ip, int32_t *bp) { + uint32_t i; + + osalDbgCheck((ip != NULL) && (bp !=NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY) || + (((LSM303DLHCDriver *)ip)->state == LSM303DLHC_STOP), + "acc_set_bias(), invalid state"); + + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) { + ((LSM303DLHCDriver *)ip)->accbias[i] = bp[i]; + } + return MSG_OK; +} + +static msg_t comp_set_bias(void *ip, int32_t *bp) { + uint32_t i; + + osalDbgCheck((ip != NULL) && (bp !=NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY) || + (((LSM303DLHCDriver *)ip)->state == LSM303DLHC_STOP), + "comp_set_bias(), invalid state"); + + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + ((LSM303DLHCDriver *)ip)->compbias[i] = bp[i]; + } + return MSG_OK; +} + +static msg_t acc_reset_bias(void *ip) { + uint32_t i; + + osalDbgCheck(ip != NULL); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY) || + (((LSM303DLHCDriver *)ip)->state == LSM303DLHC_STOP), + "acc_reset_bias(), invalid state"); + + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->accbias[i] = 0; + return MSG_OK; +} + +static msg_t comp_reset_bias(void *ip) { + uint32_t i; + + osalDbgCheck(ip != NULL); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY) || + (((LSM303DLHCDriver *)ip)->state == LSM303DLHC_STOP), + "comp_reset_bias(), invalid state"); + + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->compbias[i] = 0; + return MSG_OK; +} + +static msg_t acc_set_sensivity(void *ip, float *sp) { + uint32_t i; + + osalDbgCheck((ip != NULL) && (sp !=NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "acc_set_sensivity(), invalid state"); + + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) { + ((LSM303DLHCDriver *)ip)->accsensitivity[i] = sp[i]; + } + return MSG_OK; +} + +static msg_t comp_set_sensivity(void *ip, float *sp) { + uint32_t i; + + osalDbgCheck((ip != NULL) && (sp !=NULL)); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "comp_set_sensivity(), invalid state"); + + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = sp[i]; + } + return MSG_OK; +} + +static msg_t acc_reset_sensivity(void *ip) { + uint32_t i; + + osalDbgCheck(ip != NULL); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "acc_reset_sensivity(), invalid state"); + + if(((LSM303DLHCDriver *)ip)->config->acccfg->fullscale == LSM303DLHC_ACC_FS_2G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->accsensitivity[i] = LSM303DLHC_ACC_SENS_2G; + else if(((LSM303DLHCDriver *)ip)->config->acccfg->fullscale == LSM303DLHC_ACC_FS_4G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->accsensitivity[i] = LSM303DLHC_ACC_SENS_4G; + else if(((LSM303DLHCDriver *)ip)->config->acccfg->fullscale == LSM303DLHC_ACC_FS_8G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->accsensitivity[i] = LSM303DLHC_ACC_SENS_8G; + else if(((LSM303DLHCDriver *)ip)->config->acccfg->fullscale == LSM303DLHC_ACC_FS_16G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + ((LSM303DLHCDriver *)ip)->accsensitivity[i] = LSM303DLHC_ACC_SENS_16G; + else { + osalDbgAssert(FALSE, "reset_sensivity(), accelerometer full scale issue"); + return MSG_RESET; + } + return MSG_OK; +} + +static msg_t comp_reset_sensivity(void *ip) { + uint32_t i; + + osalDbgCheck(ip != NULL); + + osalDbgAssert((((LSM303DLHCDriver *)ip)->state == LSM303DLHC_READY), + "comp_reset_sensivity(), invalid state"); + + if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_1_3_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_1_3GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_1_3GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_1_9_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_1_9GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_1_9GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_2_5_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_2_5GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_2_5GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_4_0_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_4_0GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_4_0GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_4_7_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_4_7GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_4_7GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_5_6_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_5_6GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_5_6GA; + } + } + else if(((LSM303DLHCDriver *)ip)->config->compcfg->fullscale == LSM303DLHC_COMP_FS_8_1_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_8_1GA; + } + else { + ((LSM303DLHCDriver *)ip)->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_8_1GA; + } + } + else { + osalDbgAssert(FALSE, "reset_sensivity(), compass full scale issue"); + return MSG_RESET; + } + return MSG_OK; +} + +static const struct BaseSensorVMT vmt_basesensor = { + sens_get_axes_number, sens_read_raw, sens_read_cooked +}; + +static const struct BaseCompassVMT vmt_basecompass = { + comp_get_axes_number, comp_read_raw, comp_read_cooked, + comp_set_bias, comp_reset_bias, comp_set_sensivity, comp_reset_sensivity +}; + +static const struct BaseAccelerometerVMT vmt_baseaccelerometer = { + acc_get_axes_number, acc_read_raw, acc_read_cooked, + acc_set_bias, acc_reset_bias, acc_set_sensivity, acc_reset_sensivity +}; + +static const struct LSM303DLHCACCVMT vmt_lsm303dlhcacc = { + acc_get_axes_number, acc_read_raw, acc_read_cooked, + acc_set_bias, acc_reset_bias, acc_set_sensivity, acc_reset_sensivity +}; + +static const struct LSM303DLHCCOMPVMT vmt_lsm303dlhccomp = { + comp_get_axes_number, comp_read_raw, comp_read_cooked, + comp_set_bias, comp_reset_bias, comp_set_sensivity, comp_reset_sensivity +}; + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Initializes an instance. + * + * @param[out] devp pointer to the @p LSM303DLHCDriver object + * + * @init + */ +void lsm303dlhcObjectInit(LSM303DLHCDriver *devp) { + uint32_t i; + devp->vmt_basesensor = &vmt_basesensor; + devp->vmt_baseaccelerometer = &vmt_baseaccelerometer; + devp->vmt_basecompass = &vmt_basecompass; + devp->vmt_lsm303dlhcacc = &vmt_lsm303dlhcacc; + devp->vmt_lsm303dlhccomp = &vmt_lsm303dlhccomp; + devp->config = NULL; + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + devp->accbias[i] = 0; + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) + devp->compbias[i] = 0; + devp->state = LSM303DLHC_STOP; +} + +/** + * @brief Configures and activates LSM303DLHC Complex Driver peripheral. + * + * @param[in] devp pointer to the @p LSM303DLHCDriver object + * @param[in] config pointer to the @p LSM303DLHCConfig object + * + * @api + */ +void lsm303dlhcStart(LSM303DLHCDriver *devp, const LSM303DLHCConfig *config) { + uint32_t i; + osalDbgCheck((devp != NULL) && (config != NULL)); + + osalDbgAssert((devp->state == LSM303DLHC_STOP) || (devp->state == LSM303DLHC_READY), + "lsm303dlhcStart(), invalid state"); + + devp->config = config; + +#if LSM303DLHC_USE_I2C +#if LSM303DLHC_SHARED_I2C + i2cAcquireBus((devp)->config->i2cp); +#endif /* LSM303DLHC_SHARED_I2C */ + i2cStart((devp)->config->i2cp, + (devp)->config->i2ccfg); + if((devp)->config->acccfg != NULL) { + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_CTRL_REG1, + devp->config->acccfg->axesenabling | + devp->config->acccfg->outdatarate | + devp->config->acccfg->lowpower); + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_CTRL_REG4, + devp->config->acccfg->endianess | + devp->config->acccfg->fullscale | + devp->config->acccfg->blockdataupdate | + devp->config->acccfg->highresmode); + } + if((devp)->config->compcfg != NULL) { + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_CRA_REG, + devp->config->compcfg->outputdatarate); + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_CRB_REG, + devp->config->compcfg->fullscale); + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_MR_REG, + devp->config->compcfg->mode); + } +#if LSM303DLHC_SHARED_I2C + i2cReleaseBus((devp)->config->i2cp); +#endif /* LSM303DLHC_SHARED_I2C */ +#endif /* LSM303DLHC_USE_I2C */ + /* Storing sensitivity information according to full scale value */ + if((devp)->config->acccfg != NULL) { + if(devp->config->acccfg->fullscale == LSM303DLHC_ACC_FS_2G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + devp->accsensitivity[i] = LSM303DLHC_ACC_SENS_2G; + else if(devp->config->acccfg->fullscale == LSM303DLHC_ACC_FS_4G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + devp->accsensitivity[i] = LSM303DLHC_ACC_SENS_4G; + else if(devp->config->acccfg->fullscale == LSM303DLHC_ACC_FS_8G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + devp->accsensitivity[i] = LSM303DLHC_ACC_SENS_8G; + else if(devp->config->acccfg->fullscale == LSM303DLHC_ACC_FS_16G) + for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++) + devp->accsensitivity[i] = LSM303DLHC_ACC_SENS_16G; + else + osalDbgAssert(FALSE, "lsm303dlhcStart(), accelerometer full scale issue"); + } + if((devp)->config->compcfg != NULL) { + if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_1_3_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_1_3GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_1_3GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_1_9_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_1_9GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_1_9GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_2_5_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_2_5GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_2_5GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_4_0_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_4_0GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_4_0GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_4_7_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_4_7GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_4_7GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_5_6_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_5_6GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_5_6GA; + } + } + else if(devp->config->compcfg->fullscale == LSM303DLHC_COMP_FS_8_1_GA) + for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++) { + if(i != 2) { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_XY_8_1GA; + } + else { + devp->compsensitivity[i] = LSM303DLHC_COMP_SENS_Z_8_1GA; + } + } + else + osalDbgAssert(FALSE, "lsm303dlhcStart(), compass full scale issue"); + } + /* This is the Compass transient recovery time */ + osalThreadSleepMilliseconds(5); + + devp->state = LSM303DLHC_READY; +} + +/** + * @brief Deactivates the LSM303DLHC Complex Driver peripheral. + * + * @param[in] devp pointer to the @p LSM303DLHCDriver object + * + * @api + */ +void lsm303dlhcStop(LSM303DLHCDriver *devp) { + + osalDbgCheck(devp != NULL); + + osalDbgAssert((devp->state == LSM303DLHC_STOP) || (devp->state == LSM303DLHC_READY), + "lsm303dlhcStop(), invalid state"); + +#if (LSM303DLHC_USE_I2C) + if (devp->state == LSM303DLHC_STOP) { +#if LSM303DLHC_SHARED_I2C + i2cAcquireBus((devp)->config->i2cp); + i2cStart((devp)->config->i2cp, + (devp)->config->i2ccfg); +#endif /* LSM303DLHC_SHARED_I2C */ + if((devp)->config->acccfg != NULL) { + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_ACC, + LSM303DLHC_AD_ACC_CTRL_REG1, + LSM303DLHC_ACC_AE_DISABLED | + LSM303DLHC_ACC_ODR_PD); + } + if((devp)->config->compcfg != NULL) { + lsm303dlhcI2CWriteRegister(devp->config->i2cp, + LSM303DLHC_SAD_COMP, + LSM303DLHC_AD_COMP_MR_REG, + LSM303DLHC_COMP_MD_SLEEP); + } + i2cStop((devp)->config->i2cp); +#if LSM303DLHC_SHARED_I2C + i2cReleaseBus((devp)->config->i2cp); +#endif /* LSM303DLHC_SHARED_I2C */ + } +#endif /* LSM303DLHC_USE_I2C */ + devp->state = LSM303DLHC_STOP; +} +/** @} */ diff --git a/os/ex/ST/lsm303dlhc.h b/os/ex/ST/lsm303dlhc.h new file mode 100644 index 000000000..86317a691 --- /dev/null +++ b/os/ex/ST/lsm303dlhc.h @@ -0,0 +1,441 @@ +/* + ChibiOS - Copyright (C) 2016 Rocco Marco Guglielmi + + This file is part of ChibiOS. + + ChibiOS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +*/ + +/** + * @file lsm303dlhc.h + * @brief LSM303DLHC MEMS interface module header. + * + * @{ + */ +#ifndef _LSM303DLHC_H_ +#define _LSM303DLHC_H_ + +#include "hal_accelerometer.h" +#include "hal_compass.h" + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/** + * @brief LSM303DLHC accelerometer subsystem number of axes. + */ +#define LSM303DLHC_ACC_NUMBER_OF_AXES ((size_t) 3U) + +/** + * @brief LSM303DLHC compass subsystem number of axes. + */ +#define LSM303DLHC_COMP_NUMBER_OF_AXES ((size_t) 3U) + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief LSM303DLHC SPI interface selector. + * @details If set to @p TRUE the support for SPI is included. + * @note The default is @p FALSE. + */ +#if !defined(LSM303DLHC_USE_SPI) || defined(__DOXYGEN__) +#define LSM303DLHC_USE_SPI FALSE +#endif + +/** + * @brief LSM303DLHC I2C interface selector. + * @details If set to @p TRUE the support for I2C is included. + * @note The default is @p TRUE. + */ +#if !defined(LSM303DLHC_USE_I2C) || defined(__DOXYGEN__) +#define LSM303DLHC_USE_I2C TRUE +#endif + +/** + * @brief LSM303DLHC shared I2C switch. + * @details If set to @p TRUE the device acquires I2C bus ownership + * on each transaction. + * @note The default is @p FALSE. Requires I2C_USE_MUTUAL_EXCLUSION. + */ +#if !defined(LSM303DLHC_SHARED_I2C) || defined(__DOXYGEN__) +#define LSM303DLHC_SHARED_I2C FALSE +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if LSM303DLHC_USE_SPI && LSM303DLHC_USE_I2C +#error "LSM303DLHC_USE_SPI and LSM303DLHC_USE_I2C cannot be both true" +#endif + +#if LSM303DLHC_USE_SPI && !HAL_USE_SPI +#error "LSM303DLHC_USE_SPI requires HAL_USE_SPI" +#endif + +#if LSM303DLHC_USE_I2C && !HAL_USE_I2C +#error "LSM303DLHC_USE_I2C requires HAL_USE_I2C" +#endif + +#if LSM303DLHC_SHARED_I2C && !I2C_USE_MUTUAL_EXCLUSION +#error "LSM303DLHC_SHARED_SPI requires I2C_USE_MUTUAL_EXCLUSION" +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @name LSM303DLHC accelerometer subsystem data structures and types. + * @{ + */ + +/** + * @brief LSM303DLHC accelerometer subsystem full scale. + */ +typedef enum { + LSM303DLHC_ACC_FS_2G = 0x00, /**< Full scale ±2g. */ + LSM303DLHC_ACC_FS_4G = 0x10, /**< Full scale ±4g. */ + LSM303DLHC_ACC_FS_8G = 0x20, /**< Full scale ±8g. */ + LSM303DLHC_ACC_FS_16G = 0x30 /**< Full scale ±16g. */ +} lsm303dlhc_acc_fs_t; + +/** + * @brief LSM303DLHC accelerometer subsystem output data rate. + */ +typedef enum { + LSM303DLHC_ACC_ODR_PD = 0x00, /**< Power down */ + LSM303DLHC_ACC_ODR_1Hz = 0x10, /**< ODR 1 Hz */ + LSM303DLHC_ACC_ODR_10Hz = 0x20, /**< ODR 10 Hz */ + LSM303DLHC_ACC_ODR_25Hz = 0x30, /**< ODR 25 Hz */ + LSM303DLHC_ACC_ODR_50Hz = 0x40, /**< ODR 50 Hz */ + LSM303DLHC_ACC_ODR_100Hz = 0x50, /**< ODR 100 Hz */ + LSM303DLHC_ACC_ODR_200Hz = 0x60, /**< ODR 200 Hz */ + LSM303DLHC_ACC_ODR_400Hz = 0x70, /**< ODR 400 Hz */ + LSM303DLHC_ACC_ODR_1620Hz = 0x80, /**< ODR 1620 Hz (LP only) */ + LSM303DLHC_ACC_ODR_1344Hz = 0x90 /**< ODR 1344 Hz or 5376 Hz in LP */ +} lsm303dlhc_acc_odr_t; + + +/** + * @brief LSM303DLHC accelerometer subsystem axes enabling. + */ +typedef enum { + LSM303DLHC_ACC_AE_DISABLED = 0x00,/**< All axes disabled. */ + LSM303DLHC_ACC_AE_X = 0x01, /**< Only X-axis enabled. */ + LSM303DLHC_ACC_AE_Y = 0x02, /**< Only Y-axis enabled. */ + LSM303DLHC_ACC_AE_XY = 0x03, /**< X and Y axes enabled. */ + LSM303DLHC_ACC_AE_Z = 0x04, /**< Only Z-axis enabled. */ + LSM303DLHC_ACC_AE_XZ = 0x05, /**< X and Z axes enabled. */ + LSM303DLHC_ACC_AE_YZ = 0x06, /**< Y and Z axes enabled. */ + LSM303DLHC_ACC_AE_XYZ = 0x07 /**< All axes enabled. */ +} lsm303dlhc_acc_ae_t; + +/** + * @brief LSM303DLHC accelerometer subsystem low power mode. + */ +typedef enum { + LSM303DLHC_ACC_LP_DISABLED = 0x00,/**< Low power mode disabled. */ + LSM303DLHC_ACC_LP_ENABLED = 0x40 /**< Low power mode enabled. */ +} lsm303dlhc_acc_lp_t; + +/** + * @brief LSM303DLHC accelerometer subsystem high resolution mode. + */ +typedef enum { + LSM303DLHC_ACC_HR_DISABLED = 0x00,/**< High resolution mode disabled. */ + LSM303DLHC_ACC_HR_ENABLED = 0x08 /**< High resolution mode enabled. */ +} lsm303dlhc_acc_hr_t; + +/** + * @brief LSM303DLHC accelerometer subsystem block data update. + */ +typedef enum { + LSM303DLHC_ACC_BDU_CONT = 0x00, /**< Continuous update */ + LSM303DLHC_ACC_BDU_BLOCK = 0x80 /**< Update blocked */ +} lsm303dlhc_acc_bdu_t; + +/** + * @brief LSM303DLHC accelerometer endianness. + */ +typedef enum { + LSM303DLHC_ACC_END_LITTLE = 0x00, /**< Little Endian */ + LSM303DLHC_ACC_END_BIG = 0x40 /**< Big Endian */ +} lsm303dlhc_acc_end_t; + + +/** + * @brief LSM303DLHC accelerometer subsystem unit. + */ +typedef enum { + LSM303DLHC_ACC_UNIT_G = 0x00, /**< Cooked data in g. */ + LSM303DLHC_ACC_UNIT_MG = 0x01, /**< Cooked data in mg. */ + LSM303DLHC_ACC_UNIT_SI = 0x02, /**< Cooked data in m/s^2. */ +} lsm303dlhc_acc_unit_t; + +/** + * @brief LSM303DLHC accelerometer subsystem configuration structure. + */ +typedef struct { + /** + * @brief LSM303DLHC accelerometer subsystem full scale. + */ + lsm303dlhc_acc_fs_t fullscale; + /** + * @brief LSM303DLHC accelerometer subsystem output data rate. + */ + lsm303dlhc_acc_odr_t outdatarate; + /** + * @brief LSM303DLHC accelerometer subsystem axes enabling. + */ + lsm303dlhc_acc_ae_t axesenabling; + /** + * @brief LSM303DLHC accelerometer subsystem low power mode. + */ + lsm303dlhc_acc_lp_t lowpower; + /** + * @brief LSM303DLHC accelerometer subsystem high resolution mode. + */ + lsm303dlhc_acc_hr_t highresmode; + /** + * @brief LSM303DLHC accelerometer subsystem block data update. + */ + lsm303dlhc_acc_bdu_t blockdataupdate; + /** + * @brief LSM303DLHC accelerometer endianness. + */ + lsm303dlhc_acc_end_t endianess; + /** + * @brief LSM303DLHC accelerometer subsystem unit. + */ + lsm303dlhc_acc_unit_t unit; +} LSM303DLHCAccConfig; +/** @} */ + +/** + * @name LSM303DLHC compass subsystem data structures and types. + * @{ + */ +/** + * @brief LSM303DLHC compass subsystem full scale. + */ +typedef enum { + LSM303DLHC_COMP_FS_1_3_GA = 0x20, /**< Full scale ±1.3 Gauss */ + LSM303DLHC_COMP_FS_1_9_GA = 0x40, /**< Full scale ±1.9 Gauss */ + LSM303DLHC_COMP_FS_2_5_GA = 0x60, /**< Full scale ±2.5 Gauss */ + LSM303DLHC_COMP_FS_4_0_GA = 0x80, /**< Full scale ±4.0 Gauss */ + LSM303DLHC_COMP_FS_4_7_GA = 0xA0, /**< Full scale ±4.7 Gauss */ + LSM303DLHC_COMP_FS_5_6_GA = 0xC0, /**< Full scale ±5.6 Gauss */ + LSM303DLHC_COMP_FS_8_1_GA = 0xE0 /**< Full scale ±8.1 Gauss */ +} lsm303dlhc_comp_fs_t; + +/** + * @brief LSM303DLHC compass subsystem output data rate. + */ +typedef enum { + LSM303DLHC_COMP_ODR_0_75HZ = 0x00,/**< ODR 0.75 Hz */ + LSM303DLHC_COMP_ODR_1_5HZ = 0x04, /**< ODR 1.5 Hz */ + LSM303DLHC_COMP_ODR_3_0HZ = 0x08, /**< ODR 3 Hz */ + LSM303DLHC_COMP_ODR_7_5HZ = 0x0C, /**< ODR 7.5 Hz */ + LSM303DLHC_COMP_ODR_15HZ = 0x10, /**< ODR 15 Hz */ + LSM303DLHC_COMP_ODR_30HZ = 0x14, /**< ODR 30 Hz */ + LSM303DLHC_COMP_ODR_75HZ = 0x18, /**< ODR 75 Hz */ + LSM303DLHC_COMP_ODR_220HZ = 0x1C /**< ODR 220 Hz */ +} lsm303dlhc_comp_odr_t; + +/** + * @brief LSM303DLHC compass subsystem working mode. + */ +typedef enum { + LSM303DLHC_COMP_MD_CONT = 0x00, /**< Continuous-Conversion Mode */ + LSM303DLHC_COMP_MD_BLOCK = 0x01, /**< Single-Conversion Mode */ + LSM303DLHC_COMP_MD_SLEEP = 0x02 /**< Sleep Mode */ +} lsm303dlhc_comp_md_t; + +/** + * @brief LSM303DLHC compass subsystem configuration structure. + */ +typedef struct { + /** + * @brief LSM303DLHC compass subsystem full scale. + */ + lsm303dlhc_comp_fs_t fullscale; + /** + * @brief LSM303DLHC compass subsystem output data rate. + */ + lsm303dlhc_comp_odr_t outputdatarate; + /** + * @brief LSM303DLHC compass subsystem working mode. + */ + lsm303dlhc_comp_md_t mode; +} LSM303DLHCCompConfig; +/** @} */ + +/** + * @name LSM303DLHC main system data structures and types. + * @{ + */ + +/** + * @brief Driver state machine possible states. + */ +typedef enum { + LSM303DLHC_UNINIT = 0, /**< Not initialized. */ + LSM303DLHC_STOP = 1, /**< Stopped. */ + LSM303DLHC_READY = 2, /**< Ready. */ +} lsm303dlhc_state_t; + +/** + * @brief LSM303DLHC configuration structure. + */ +typedef struct { +#if (LSM303DLHC_USE_SPI) || defined(__DOXYGEN__) + /** + * @brief SPI driver associated to this LSM303DLHC. + */ + SPIDriver *spip; + /** + * @brief SPI configuration associated to this LSM303DLHC accelerometer + * subsystem. + */ + const SPIConfig *accspicfg; + /** + * @brief SPI configuration associated to this LSM303DLHC compass + * subsystem. + */ + const SPIConfig *compspicfg; +#endif /* LSM303DLHC_USE_SPI */ +#if (LSM303DLHC_USE_I2C) || defined(__DOXYGEN__) + /** + * @brief I2C driver associated to this LSM303DLHC. + */ + I2CDriver *i2cp; + /** + * @brief I2C configuration associated to this LSM303DLHC accelerometer + * subsystem. + */ + const I2CConfig *i2ccfg; +#endif /* LSM303DLHC_USE_I2C */ + /** + * @brief LSM303DLHC accelerometer subsystem configuration structure + */ + const LSM303DLHCAccConfig *acccfg; + /** + * @brief LSM303DLHC compass subsystem configuration structure + */ + const LSM303DLHCCompConfig *compcfg; +} LSM303DLHCConfig; + +/** + * @brief Structure representing a LSM303DLHC driver. + */ +typedef struct LSM303DLHCDriver LSM303DLHCDriver; + +/** + * @brief @p LSM303DLHC accelerometer subsystem specific methods. + */ +#define _lsm303dlhc_acc_methods \ + _base_accelerometer_methods + +/** + * @brief @p LSM303DLHC compass subsystem specific methods. + */ +#define _lsm303dlhc_comp_methods \ + _base_compass_methods + +/** + * @extends BaseAccelerometerVMT + * + * @brief @p LSM303DLHC accelerometer virtual methods table. + */ +struct LSM303DLHCACCVMT { + _lsm303dlhc_acc_methods +}; + +/** + * @extends BaseCompassVMT + * + * @brief @p LSM303DLHC compass virtual methods table. + */ +struct LSM303DLHCCOMPVMT { + _lsm303dlhc_comp_methods +}; + +/** + * @brief @p LSM303DLHCDriver specific data. + */ +#define _lsm303dlhc_data \ + _base_accelerometer_data \ + _base_compass_data \ + /* Driver state.*/ \ + lsm303dlhc_state_t state; \ + /* Current configuration data.*/ \ + const LSM303DLHCConfig *config; \ + /* Current accelerometer sensitivity.*/ \ + float accsensitivity[LSM303DLHC_ACC_NUMBER_OF_AXES]; \ + /* Accelerometer bias data.*/ \ + int32_t accbias[LSM303DLHC_ACC_NUMBER_OF_AXES]; \ + /* Current compass sensitivity.*/ \ + float compsensitivity[LSM303DLHC_COMP_NUMBER_OF_AXES];\ + /* Bias data.*/ \ + int32_t compbias[LSM303DLHC_COMP_NUMBER_OF_AXES]; + +/** + * @brief LSM303DLHC 6-axis accelerometer/compass class. + */ +struct LSM303DLHCDriver { + /** @brief BaseSensor Virtual Methods Table. */ + const struct BaseSensorVMT *vmt_basesensor; + /** @brief BaseAccelerometer Virtual Methods Table. */ + const struct BaseAccelerometerVMT *vmt_baseaccelerometer; + /** @brief BaseCompass Virtual Methods Table. */ + const struct BaseCompassVMT *vmt_basecompass; + /** @brief LSM303DLHC Accelerometer Virtual Methods Table. */ + const struct LSM303DLHCACCVMT *vmt_lsm303dlhcacc; + /** @brief LSM303DLHC Compass Virtual Methods Table. */ + const struct LSM303DLHCCOMPVMT *vmt_lsm303dlhccomp; + _lsm303dlhc_data +}; +/** @} */ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + void lsm303dlhcObjectInit(LSM303DLHCDriver *devp); + void lsm303dlhcStart(LSM303DLHCDriver *devp, const LSM303DLHCConfig *config); + void lsm303dlhcStop(LSM303DLHCDriver *devp); +#ifdef __cplusplus +} +#endif + +#endif /* _LSM303DLHC_H_ */ + +/** @} */ diff --git a/os/ex/ST/lsm303dlhc.mk b/os/ex/ST/lsm303dlhc.mk new file mode 100644 index 000000000..caab8e439 --- /dev/null +++ b/os/ex/ST/lsm303dlhc.mk @@ -0,0 +1,6 @@ +# List of all the LSM303DLHC device files.
+LSM303DLHCSRC := $(CHIBIOS)/os/ex/ST/lsm303dlhc.c
+
+# Required include directories
+LSM303DLHCINC := $(CHIBIOS)/os/hal/lib/peripherals/sensors \
+ $(CHIBIOS)/os/ex/ST
\ No newline at end of file diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.cproject b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.cproject new file mode 100644 index 000000000..644f14e3e --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.cproject @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.1984968159">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1984968159" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1984968159" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.1984968159." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362.270307390" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1075495684" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.1667039593" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1490155624" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1745864609" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1771767067" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.232441590" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1677220503" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2124347918" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="RT-STM32F303-DISCOVERY.null.1212300359" name="RT-STM32F303-DISCOVERY"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.1984968159">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope" versionNumber="2">
+ <configuration configurationName="Default">
+ <resource resourceType="PROJECT" workspacePath="/RT-STM32F303-DISCOVERY"/>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.project b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.project new file mode 100644 index 000000000..73e5a83ea --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/.project @@ -0,0 +1,38 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>STM32F3xx-I2C-LSM303DLHC</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/Makefile b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/Makefile new file mode 100644 index 000000000..fe15d208b --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/Makefile @@ -0,0 +1,220 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = hard
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../..
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/os/ex/ST/lsm303dlhc.mk
+include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(LSM303DLHCSRC) \
+ $(STREAMSSRC) \
+ usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC =
+ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(CHIBIOS)/os/license \
+ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(LSM303DLHCINC) \
+ $(STREAMSINC) $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DCHPRINTF_USE_FLOAT=1
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/chconf.h b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/chconf.h new file mode 100644 index 000000000..ad6b53ade --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/chconf.h @@ -0,0 +1,520 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/debug/STM32F3xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/debug/STM32F3xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch new file mode 100644 index 000000000..f35ed94ba --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/debug/STM32F3xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\STM32F3xx-I2C-LSM303DLHC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20 monitor reset init monitor sleep 50 "/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="STM32F3xx-I2C-LSM303DLHC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/STM32F3xx-I2C-LSM303DLHC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/halconf.h b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/halconf.h new file mode 100644 index 000000000..6e145cea1 --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/halconf.h @@ -0,0 +1,388 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/main.c b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/main.c new file mode 100644 index 000000000..5cee22670 --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/main.c @@ -0,0 +1,138 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#include "usbcfg.h"
+#include "chprintf.h"
+#include "lsm303dlhc.h"
+
+/*
+ * DP resistor control is not possible on the STM32F3-Discovery, using stubs
+ * for the connection macros.
+ */
+#define usb_lld_connect_bus(usbp)
+#define usb_lld_disconnect_bus(usbp)
+
+/* Enable use of special ANSI escape sequences */
+#define CHPRINTF_USE_ANSI_CODE TRUE
+
+static BaseSequentialStream * chp = (BaseSequentialStream*) &SDU1;
+
+/* LSM303DLHC Driver: This object represent an LSM303DLHC instance */
+static LSM303DLHCDriver LSM303DLHCD1;
+
+static int32_t rawdata[LSM303DLHC_ACC_NUMBER_OF_AXES + LSM303DLHC_COMP_NUMBER_OF_AXES];
+static float cookeddata[LSM303DLHC_ACC_NUMBER_OF_AXES + LSM303DLHC_COMP_NUMBER_OF_AXES];
+
+static char axesID[LSM303DLHC_ACC_NUMBER_OF_AXES] = {'X', 'Y', 'Z'};
+static uint32_t i;
+
+static const I2CConfig i2ccfg = {
+ STM32_TIMINGR_PRESC(15U) |
+ STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
+ STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U),
+ 0,
+ 0
+};
+
+static const LSM303DLHCAccConfig lsm303dlhcacccfg = {
+ LSM303DLHC_ACC_FS_2G,
+ LSM303DLHC_ACC_ODR_100Hz,
+ LSM303DLHC_ACC_AE_XYZ,
+ LSM303DLHC_ACC_LP_DISABLED,
+ LSM303DLHC_ACC_HR_DISABLED,
+ LSM303DLHC_ACC_BDU_BLOCK,
+ LSM303DLHC_ACC_END_LITTLE,
+ LSM303DLHC_ACC_UNIT_G
+};
+
+static const LSM303DLHCCompConfig lsm303dlhccompcfg = {
+ LSM303DLHC_COMP_FS_1_3_GA,
+ LSM303DLHC_COMP_ODR_30HZ,
+ LSM303DLHC_COMP_MD_CONT,
+};
+
+static const LSM303DLHCConfig lsm303dlhccfg = {
+ &I2CD1,
+ &i2ccfg,
+ &lsm303dlhcacccfg,
+ &lsm303dlhccompcfg
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Initializes a serial-over-USB CDC driver.
+ */
+ sduObjectInit(&SDU1);
+ sduStart(&SDU1, &serusbcfg);
+
+ /*
+ * Activates the USB driver and then the USB bus pull-up on D+.
+ * Note, a delay is inserted in order to not have to disconnect the cable
+ * after a reset.
+ */
+ usbDisconnectBus(serusbcfg.usbp);
+ chThdSleepMilliseconds(1500);
+ usbStart(serusbcfg.usbp, &usbcfg);
+ usbConnectBus(serusbcfg.usbp);
+
+ /*
+ * LSM303DLHC Object Initialization
+ */
+ lsm303dlhcObjectInit(&LSM303DLHCD1);
+
+ lsm303dlhcStart(&LSM303DLHCD1, &lsm303dlhccfg);
+
+ while (TRUE) {
+ palToggleLine(LINE_LED3_RED);
+ sensorReadRaw(&LSM303DLHCD1, rawdata);
+ sensorReadCooked(&LSM303DLHCD1, cookeddata);
+ chprintf(chp, "ACCELEROMETER DATA\r\n");
+ for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++)
+ chprintf(chp, "RAW-%c:%d\t\t", axesID[i], rawdata[i]);
+ chprintf(chp, "\r\n");
+ for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++)
+ chprintf(chp, "COOKED-%c:%.3f g\t", axesID[i], cookeddata[i]);
+
+ chprintf(chp, "\r\nCOMPSCOPE DATA\r\n");
+ for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++)
+ chprintf(chp, "RAW-%c:%d\t\t", axesID[i], rawdata[i + 3]);
+ chprintf(chp, "\r\n");
+ for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++)
+ chprintf(chp, "COOKED-%c:%.3f Gauss\t", axesID[i], cookeddata[i + 3]);
+ chprintf(chp, "\r\n");
+ chThdSleepMilliseconds(100);
+#if CHPRINTF_USE_ANSI_CODE
+ chprintf(chp, "\033[2J\033[1;1H");
+#endif
+ }
+}
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/mcuconf.h b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/mcuconf.h new file mode 100644 index 000000000..51072e1d6 --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/mcuconf.h @@ -0,0 +1,253 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM6 FALSE
+#define STM32_GPT_USE_TIM7 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 TRUE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/readme.txt b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/readme.txt new file mode 100644 index 000000000..d19c66ffd --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/readme.txt @@ -0,0 +1,27 @@ +*****************************************************************************
+** ChibiOS/HAL + ChibiOS/EX - SPI + LSM303DLHC demo for STM32F3xx. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STM32F3 Discovery board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, read data from LSM303DLHC
+printing it on a BaseSequentialStream (SDU1, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.c b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.c new file mode 100644 index 000000000..13a2e7ee3 --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.c @@ -0,0 +1,334 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP 1
+#define USBD1_DATA_AVAILABLE_EP 1
+#define USBD1_INTERRUPT_REQUEST_EP 2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+ USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
+ 0x02, /* bDeviceClass (CDC). */
+ 0x00, /* bDeviceSubClass. */
+ 0x00, /* bDeviceProtocol. */
+ 0x40, /* bMaxPacketSize. */
+ 0x0483, /* idVendor (ST). */
+ 0x5740, /* idProduct. */
+ 0x0200, /* bcdDevice. */
+ 1, /* iManufacturer. */
+ 2, /* iProduct. */
+ 3, /* iSerialNumber. */
+ 1) /* bNumConfigurations. */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+ sizeof vcom_device_descriptor_data,
+ vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+ /* Configuration Descriptor.*/
+ USB_DESC_CONFIGURATION(67, /* wTotalLength. */
+ 0x02, /* bNumInterfaces. */
+ 0x01, /* bConfigurationValue. */
+ 0, /* iConfiguration. */
+ 0xC0, /* bmAttributes (self powered). */
+ 50), /* bMaxPower (100mA). */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x02, /* bInterfaceClass (Communications
+ Interface Class, CDC section
+ 4.2). */
+ 0x02, /* bInterfaceSubClass (Abstract
+ Control Model, CDC section 4.3). */
+ 0x01, /* bInterfaceProtocol (AT commands,
+ CDC section 4.4). */
+ 0), /* iInterface. */
+ /* Header Functional Descriptor (CDC section 5.2.3).*/
+ USB_DESC_BYTE (5), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
+ Functional Descriptor. */
+ USB_DESC_BCD (0x0110), /* bcdCDC. */
+ /* Call Management Functional Descriptor. */
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
+ USB_DESC_BYTE (0x01), /* bDataInterface. */
+ /* ACM Functional Descriptor.*/
+ USB_DESC_BYTE (4), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
+ Control Management Descriptor). */
+ USB_DESC_BYTE (0x02), /* bmCapabilities. */
+ /* Union Functional Descriptor.*/
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
+ Class Interface). */
+ USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
+ Interface). */
+ /* Endpoint 2 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
+ 0x03, /* bmAttributes (Interrupt). */
+ 0x0008, /* wMaxPacketSize. */
+ 0xFF), /* bInterval. */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x02, /* bNumEndpoints. */
+ 0x0A, /* bInterfaceClass (Data Class
+ Interface, CDC section 4.5). */
+ 0x00, /* bInterfaceSubClass (CDC section
+ 4.6). */
+ 0x00, /* bInterfaceProtocol (CDC section
+ 4.7). */
+ 0x00), /* iInterface. */
+ /* Endpoint 3 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00), /* bInterval. */
+ /* Endpoint 1 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00) /* bInterval. */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+ sizeof vcom_configuration_descriptor_data,
+ vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+ USB_DESC_BYTE(4), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+ USB_DESC_BYTE(38), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+ 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+ 'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+ USB_DESC_BYTE(56), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+ 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+ 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+ 'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+ USB_DESC_BYTE(8), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ '0' + CH_KERNEL_MAJOR, 0,
+ '0' + CH_KERNEL_MINOR, 0,
+ '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+ {sizeof vcom_string0, vcom_string0},
+ {sizeof vcom_string1, vcom_string1},
+ {sizeof vcom_string2, vcom_string2},
+ {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+ uint8_t dtype,
+ uint8_t dindex,
+ uint16_t lang) {
+
+ (void)usbp;
+ (void)lang;
+ switch (dtype) {
+ case USB_DESCRIPTOR_DEVICE:
+ return &vcom_device_descriptor;
+ case USB_DESCRIPTOR_CONFIGURATION:
+ return &vcom_configuration_descriptor;
+ case USB_DESCRIPTOR_STRING:
+ if (dindex < 4)
+ return &vcom_strings[dindex];
+ }
+ return NULL;
+}
+
+/**
+ * @brief IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+ USB_EP_MODE_TYPE_BULK,
+ NULL,
+ sduDataTransmitted,
+ sduDataReceived,
+ 0x0040,
+ 0x0040,
+ &ep1instate,
+ &ep1outstate,
+ 2,
+ NULL
+};
+
+/**
+ * @brief IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+ USB_EP_MODE_TYPE_INTR,
+ NULL,
+ sduInterruptTransmitted,
+ NULL,
+ 0x0010,
+ 0x0000,
+ &ep2instate,
+ NULL,
+ 1,
+ NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+ extern SerialUSBDriver SDU1;
+
+ switch (event) {
+ case USB_EVENT_RESET:
+ return;
+ case USB_EVENT_ADDRESS:
+ return;
+ case USB_EVENT_CONFIGURED:
+ chSysLockFromISR();
+
+ /* Enables the endpoints specified into the configuration.
+ Note, this callback is invoked from an ISR so I-Class functions
+ must be used.*/
+ usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+ usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+ /* Resetting the state of the CDC subsystem.*/
+ sduConfigureHookI(&SDU1);
+
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_SUSPEND:
+ chSysLockFromISR();
+
+ /* Disconnection event on suspend.*/
+ sduDisconnectI(&SDU1);
+
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_WAKEUP:
+ return;
+ case USB_EVENT_STALLED:
+ return;
+ }
+ return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+ (void)usbp;
+
+ osalSysLockFromISR();
+ sduSOFHookI(&SDU1);
+ osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+ usb_event,
+ get_descriptor,
+ sduRequestsHook,
+ sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+ &USBD1,
+ USBD1_DATA_REQUEST_EP,
+ USBD1_DATA_AVAILABLE_EP,
+ USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.h b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.h new file mode 100644 index 000000000..3833bf9fd --- /dev/null +++ b/testhal/STM32/STM32F3xx/I2C-LSM303DLHC/usbcfg.h @@ -0,0 +1,26 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef USBCFG_H
+#define USBCFG_H
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif /* USBCFG_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.cproject b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.cproject new file mode 100644 index 000000000..0012badfd --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.cproject @@ -0,0 +1,55 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="0.603687198">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+ <folderInfo id="0.603687198." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+ <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ <tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+ <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+ </tool>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="RT-STM32L476RG-NUCLEO.null.1004513353" name="RT-STM32L476RG-NUCLEO"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="0.603687198">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+ <storageModule moduleId="refreshScope" versionNumber="2">
+ <configuration configurationName="Default">
+ <resource resourceType="PROJECT" workspacePath="/RT-STM32L476RG-NUCLEO"/>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.project b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.project new file mode 100644 index 000000000..ff166429c --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/.project @@ -0,0 +1,38 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>STM32F4xx-I2C-LSM303DLHC</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+ <linkedResources>
+ <link>
+ <name>board</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os/hal/boards/ST_STM32F401C_DISCOVERY</locationURI>
+ </link>
+ <link>
+ <name>os</name>
+ <type>2</type>
+ <locationURI>CHIBIOS/os</locationURI>
+ </link>
+ </linkedResources>
+</projectDescription>
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/Makefile b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/Makefile new file mode 100644 index 000000000..9c2b36c4f --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/Makefile @@ -0,0 +1,220 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = hard
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../..
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/os/ex/ST/lsm303dlhc.mk
+include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F401xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(LSM303DLHCSRC) \
+ $(STREAMSSRC) \
+ usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC =
+ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(CHIBIOS)/os/license \
+ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(LSM303DLHCINC) \
+ $(STREAMSINC) $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DCHPRINTF_USE_FLOAT=1
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/chconf.h b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/chconf.h new file mode 100644 index 000000000..ad6b53ade --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/chconf.h @@ -0,0 +1,520 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/debug/STM32F4xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/debug/STM32F4xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch new file mode 100644 index 000000000..712c58939 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/debug/STM32F4xx-I2C-LSM303DLHC (OpenOCD, Flash and Run).launch @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\STM32F4xx-I2C-LSM303DLHC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20 monitor reset init monitor sleep 50 "/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="null-read_raw-(format)" val="1"/></contentList>"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="STM32F4xx-I2C-LSM303DLHC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/STM32F4xx-I2C-LSM303DLHC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/halconf.h b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/halconf.h new file mode 100644 index 000000000..6e145cea1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/halconf.h @@ -0,0 +1,388 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/main.c b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/main.c new file mode 100644 index 000000000..e492ef240 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/main.c @@ -0,0 +1,129 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#include "usbcfg.h"
+#include "chprintf.h"
+#include "lsm303dlhc.h"
+
+/* Enable use of special ANSI escape sequences */
+#define CHPRINTF_USE_ANSI_CODE TRUE
+
+static BaseSequentialStream * chp = (BaseSequentialStream*) &SDU1;
+
+/* LSM303DLHC Driver: This object represent an LSM303DLHC instance */
+static LSM303DLHCDriver LSM303DLHCD1;
+
+static int32_t rawdata[LSM303DLHC_ACC_NUMBER_OF_AXES + LSM303DLHC_COMP_NUMBER_OF_AXES];
+static float cookeddata[LSM303DLHC_ACC_NUMBER_OF_AXES + LSM303DLHC_COMP_NUMBER_OF_AXES];
+
+static char axesID[LSM303DLHC_ACC_NUMBER_OF_AXES] = {'X', 'Y', 'Z'};
+static uint32_t i;
+
+static const I2CConfig i2ccfg = {
+ OPMODE_I2C,
+ 400000,
+ FAST_DUTY_CYCLE_2,
+};
+
+static const LSM303DLHCAccConfig lsm303dlhcacccfg = {
+ LSM303DLHC_ACC_FS_2G,
+ LSM303DLHC_ACC_ODR_100Hz,
+ LSM303DLHC_ACC_AE_XYZ,
+ LSM303DLHC_ACC_LP_DISABLED,
+ LSM303DLHC_ACC_HR_DISABLED,
+ LSM303DLHC_ACC_BDU_BLOCK,
+ LSM303DLHC_ACC_END_LITTLE,
+ LSM303DLHC_ACC_UNIT_G
+};
+
+static const LSM303DLHCCompConfig lsm303dlhccompcfg = {
+ LSM303DLHC_COMP_FS_1_3_GA,
+ LSM303DLHC_COMP_ODR_30HZ,
+ LSM303DLHC_COMP_MD_BLOCK
+};
+
+static const LSM303DLHCConfig lsm303dlhccfg = {
+ &I2CD1,
+ &i2ccfg,
+ &lsm303dlhcacccfg,
+ &lsm303dlhccompcfg
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Initializes a serial-over-USB CDC driver.
+ */
+ sduObjectInit(&SDU1);
+ sduStart(&SDU1, &serusbcfg);
+
+ /*
+ * Activates the USB driver and then the USB bus pull-up on D+.
+ * Note, a delay is inserted in order to not have to disconnect the cable
+ * after a reset.
+ */
+ usbDisconnectBus(serusbcfg.usbp);
+ chThdSleepMilliseconds(1500);
+ usbStart(serusbcfg.usbp, &usbcfg);
+ usbConnectBus(serusbcfg.usbp);
+
+ /*
+ * LSM303DLHC Object Initialization
+ */
+ lsm303dlhcObjectInit(&LSM303DLHCD1);
+
+ lsm303dlhcStart(&LSM303DLHCD1, &lsm303dlhccfg);
+
+ while (TRUE) {
+ palToggleLine(LINE_LED3);
+ sensorReadRaw(&LSM303DLHCD1, rawdata);
+ sensorReadCooked(&LSM303DLHCD1, cookeddata);
+ chprintf(chp, "ACCELEROMETER DATA\r\n");
+ for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++)
+ chprintf(chp, "RAW-%c:%d\t\t", axesID[i], rawdata[i]);
+ chprintf(chp, "\r\n");
+ for(i = 0; i < LSM303DLHC_ACC_NUMBER_OF_AXES; i++)
+ chprintf(chp, "COOKED-%c:%.3f g\t", axesID[i], cookeddata[i]);
+
+ chprintf(chp, "\r\nCOMPSCOPE DATA\r\n");
+ for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++)
+ chprintf(chp, "RAW-%c:%d\t\t", axesID[i], rawdata[i + 3]);
+ chprintf(chp, "\r\n");
+ for(i = 0; i < LSM303DLHC_COMP_NUMBER_OF_AXES; i++)
+ chprintf(chp, "COOKED-%c:%.3f Gauss\t", axesID[i], cookeddata[i + 3]);
+ chprintf(chp, "\r\n");
+ chThdSleepMilliseconds(100);
+#if CHPRINTF_USE_ANSI_CODE
+ chprintf(chp, "\033[2J\033[1;1H");
+#endif
+ }
+}
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/mcuconf.h b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/mcuconf.h new file mode 100644 index 000000000..cda46ebc8 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/mcuconf.h @@ -0,0 +1,251 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 8
+#define STM32_PLLN_VALUE 336
+#define STM32_PLLP_VALUE 4
+#define STM32_PLLQ_VALUE 7
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI22_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/readme.txt b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/readme.txt new file mode 100644 index 000000000..87fd3282f --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/readme.txt @@ -0,0 +1,27 @@ +*****************************************************************************
+** ChibiOS/HAL + ChibiOS/EX - SPI + LSM303DLHC demo for STM32F4xx. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STM32F401C Discovery board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, read data from LSM303DLHC
+printing it on a BaseSequentialStream (SDU1, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.c b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.c new file mode 100644 index 000000000..13a2e7ee3 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.c @@ -0,0 +1,334 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP 1
+#define USBD1_DATA_AVAILABLE_EP 1
+#define USBD1_INTERRUPT_REQUEST_EP 2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+ USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
+ 0x02, /* bDeviceClass (CDC). */
+ 0x00, /* bDeviceSubClass. */
+ 0x00, /* bDeviceProtocol. */
+ 0x40, /* bMaxPacketSize. */
+ 0x0483, /* idVendor (ST). */
+ 0x5740, /* idProduct. */
+ 0x0200, /* bcdDevice. */
+ 1, /* iManufacturer. */
+ 2, /* iProduct. */
+ 3, /* iSerialNumber. */
+ 1) /* bNumConfigurations. */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+ sizeof vcom_device_descriptor_data,
+ vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+ /* Configuration Descriptor.*/
+ USB_DESC_CONFIGURATION(67, /* wTotalLength. */
+ 0x02, /* bNumInterfaces. */
+ 0x01, /* bConfigurationValue. */
+ 0, /* iConfiguration. */
+ 0xC0, /* bmAttributes (self powered). */
+ 50), /* bMaxPower (100mA). */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x02, /* bInterfaceClass (Communications
+ Interface Class, CDC section
+ 4.2). */
+ 0x02, /* bInterfaceSubClass (Abstract
+ Control Model, CDC section 4.3). */
+ 0x01, /* bInterfaceProtocol (AT commands,
+ CDC section 4.4). */
+ 0), /* iInterface. */
+ /* Header Functional Descriptor (CDC section 5.2.3).*/
+ USB_DESC_BYTE (5), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
+ Functional Descriptor. */
+ USB_DESC_BCD (0x0110), /* bcdCDC. */
+ /* Call Management Functional Descriptor. */
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
+ USB_DESC_BYTE (0x01), /* bDataInterface. */
+ /* ACM Functional Descriptor.*/
+ USB_DESC_BYTE (4), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
+ Control Management Descriptor). */
+ USB_DESC_BYTE (0x02), /* bmCapabilities. */
+ /* Union Functional Descriptor.*/
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
+ Class Interface). */
+ USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
+ Interface). */
+ /* Endpoint 2 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
+ 0x03, /* bmAttributes (Interrupt). */
+ 0x0008, /* wMaxPacketSize. */
+ 0xFF), /* bInterval. */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x02, /* bNumEndpoints. */
+ 0x0A, /* bInterfaceClass (Data Class
+ Interface, CDC section 4.5). */
+ 0x00, /* bInterfaceSubClass (CDC section
+ 4.6). */
+ 0x00, /* bInterfaceProtocol (CDC section
+ 4.7). */
+ 0x00), /* iInterface. */
+ /* Endpoint 3 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00), /* bInterval. */
+ /* Endpoint 1 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00) /* bInterval. */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+ sizeof vcom_configuration_descriptor_data,
+ vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+ USB_DESC_BYTE(4), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+ USB_DESC_BYTE(38), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+ 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+ 'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+ USB_DESC_BYTE(56), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+ 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+ 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+ 'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+ USB_DESC_BYTE(8), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ '0' + CH_KERNEL_MAJOR, 0,
+ '0' + CH_KERNEL_MINOR, 0,
+ '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+ {sizeof vcom_string0, vcom_string0},
+ {sizeof vcom_string1, vcom_string1},
+ {sizeof vcom_string2, vcom_string2},
+ {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+ uint8_t dtype,
+ uint8_t dindex,
+ uint16_t lang) {
+
+ (void)usbp;
+ (void)lang;
+ switch (dtype) {
+ case USB_DESCRIPTOR_DEVICE:
+ return &vcom_device_descriptor;
+ case USB_DESCRIPTOR_CONFIGURATION:
+ return &vcom_configuration_descriptor;
+ case USB_DESCRIPTOR_STRING:
+ if (dindex < 4)
+ return &vcom_strings[dindex];
+ }
+ return NULL;
+}
+
+/**
+ * @brief IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+ USB_EP_MODE_TYPE_BULK,
+ NULL,
+ sduDataTransmitted,
+ sduDataReceived,
+ 0x0040,
+ 0x0040,
+ &ep1instate,
+ &ep1outstate,
+ 2,
+ NULL
+};
+
+/**
+ * @brief IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+ USB_EP_MODE_TYPE_INTR,
+ NULL,
+ sduInterruptTransmitted,
+ NULL,
+ 0x0010,
+ 0x0000,
+ &ep2instate,
+ NULL,
+ 1,
+ NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+ extern SerialUSBDriver SDU1;
+
+ switch (event) {
+ case USB_EVENT_RESET:
+ return;
+ case USB_EVENT_ADDRESS:
+ return;
+ case USB_EVENT_CONFIGURED:
+ chSysLockFromISR();
+
+ /* Enables the endpoints specified into the configuration.
+ Note, this callback is invoked from an ISR so I-Class functions
+ must be used.*/
+ usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+ usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+ /* Resetting the state of the CDC subsystem.*/
+ sduConfigureHookI(&SDU1);
+
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_SUSPEND:
+ chSysLockFromISR();
+
+ /* Disconnection event on suspend.*/
+ sduDisconnectI(&SDU1);
+
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_WAKEUP:
+ return;
+ case USB_EVENT_STALLED:
+ return;
+ }
+ return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+ (void)usbp;
+
+ osalSysLockFromISR();
+ sduSOFHookI(&SDU1);
+ osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+ usb_event,
+ get_descriptor,
+ sduRequestsHook,
+ sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+ &USBD1,
+ USBD1_DATA_REQUEST_EP,
+ USBD1_DATA_AVAILABLE_EP,
+ USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.h b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.h new file mode 100644 index 000000000..3833bf9fd --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C-LSM303DLHC/usbcfg.h @@ -0,0 +1,26 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef USBCFG_H
+#define USBCFG_H
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif /* USBCFG_H */
+
+/** @} */
|