diff options
| -rw-r--r-- | demos/AVR/NIL-ARDUINO-MEGA/readme.txt | 23 | ||||
| -rw-r--r-- | demos/AVR/NIL-ARDUINO-MINI/readme.txt | 18 | ||||
| -rw-r--r-- | demos/AVR/NIL-ARDUINO-NANO/readme.txt | 18 | ||||
| -rw-r--r-- | demos/AVR/NIL-ARDUINO-UNO/readme.txt | 18 | ||||
| -rw-r--r-- | demos/AVR/NIL-MT-DB-X4/readme.txt | 20 | ||||
| -rw-r--r-- | demos/AVR/RT-MT-DB-X4/readme.txt | 20 |
6 files changed, 117 insertions, 0 deletions
diff --git a/demos/AVR/NIL-ARDUINO-MEGA/readme.txt b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt new file mode 100644 index 000000000..9df55d7f0 --- /dev/null +++ b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt @@ -0,0 +1,23 @@ +*****************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATmega2560. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Mega board.
+
+** The Demo **
+
+One thread prints a message to the serial console, which is available on
+the board USB connector (FT232 converter).
+
+Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo runs natively so the Arduino bootloader must be removed and the FUSEs
+reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
diff --git a/demos/AVR/NIL-ARDUINO-MINI/readme.txt b/demos/AVR/NIL-ARDUINO-MINI/readme.txt new file mode 100644 index 000000000..b9cb207e5 --- /dev/null +++ b/demos/AVR/NIL-ARDUINO-MINI/readme.txt @@ -0,0 +1,18 @@ +*****************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATmega328p. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Mini board.
+
+** The Demo **
+
+One thread prints a message to the serial console, which is available on
+the board USB connector (FT232 converter).
+
+Another thread toggles the LED on PB5 (pin 13 on Arduino IDE) every 500ms.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain.
diff --git a/demos/AVR/NIL-ARDUINO-NANO/readme.txt b/demos/AVR/NIL-ARDUINO-NANO/readme.txt new file mode 100644 index 000000000..5ffa0d103 --- /dev/null +++ b/demos/AVR/NIL-ARDUINO-NANO/readme.txt @@ -0,0 +1,18 @@ +*****************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATmega328p. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Nano board.
+
+** The Demo **
+
+One thread prints a message to the serial console, which is available on
+the board USB connector (FT232 converter).
+
+Another thread toggles the LED on PB5 (pin 13 on Arduino IDE) every 500ms.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain.
diff --git a/demos/AVR/NIL-ARDUINO-UNO/readme.txt b/demos/AVR/NIL-ARDUINO-UNO/readme.txt new file mode 100644 index 000000000..9b1844353 --- /dev/null +++ b/demos/AVR/NIL-ARDUINO-UNO/readme.txt @@ -0,0 +1,18 @@ +*****************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATmega328p. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Uno board.
+
+** The Demo **
+
+One thread prints a message to the serial console, which is available on
+the board USB connector (FT232 converter).
+
+Another thread toggles the LED on PB5 (pin 13 on Arduino IDE) every 500ms.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain.
diff --git a/demos/AVR/NIL-MT-DB-X4/readme.txt b/demos/AVR/NIL-MT-DB-X4/readme.txt new file mode 100644 index 000000000..24419f567 --- /dev/null +++ b/demos/AVR/NIL-MT-DB-X4/readme.txt @@ -0,0 +1,20 @@ +***************************************************************************** +** ChibiOS/NIL port for ATxmega128a4u. ** +***************************************************************************** + +** TARGET ** + +The demo runs on the mattair Tech MT-DB-X4 board. + +** The Demo ** + +The demo show how to blink the onboard LED every second by using a threas. + +** Build Procedure ** + +The demo was built using the GCC AVR toolchain. It should build with WinAVR too! + +** Programming procedure ** + +The board can be flash by using the Makefile and the DFU Programmer tools. +See the make file for more details. diff --git a/demos/AVR/RT-MT-DB-X4/readme.txt b/demos/AVR/RT-MT-DB-X4/readme.txt new file mode 100644 index 000000000..bd8bad930 --- /dev/null +++ b/demos/AVR/RT-MT-DB-X4/readme.txt @@ -0,0 +1,20 @@ +***************************************************************************** +** ChibiOS/RT port for ATxmega128a4u. ** +***************************************************************************** + +** TARGET ** + +The demo runs on the mattair Tech MT-DB-X4 board. + +** The Demo ** + +The demo show how to blink the onboard LED every second. + +** Build Procedure ** + +The demo was built using the GCC AVR toolchain. It should build with WinAVR too! + +** Programming procedure ** + +The board can be flash by using the Makefile and the DFU Programmer tools. +See the make file for more details. |