I2C. Moved Alberto drivers to backup.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/i2c_dev@2711 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 574 deletions

diff --git a/os/hal/platforms/STM32/i2c_lld.c b/os/hal/platforms/STM32/i2c_lld.c
deleted file mode 100644
index cd6a851db..000000000
--- a/os/hal/platforms/STM32/i2c_lld.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file STM32/i2c_lld.c

- * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.

- * @addtogroup STM32_I2C

- * @{

- */

-

-#include "ch.h"

-#include "hal.h"

-

-#if HAL_USE_I2C || defined(__DOXYGEN__)

-

-/*===========================================================================*/

-/* Driver exported variables.                                                */

-/*===========================================================================*/

-

-/** @brief I2C1 driver identifier.*/

-#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)

-I2CDriver I2CD1;

-#endif

-

-/** @brief I2C2 driver identifier.*/

-#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)

-I2CDriver I2CD2;

-#endif

-

-

-static uint32_t i2c_get_event(I2CDriver *i2cp){

-  uint32_t regSR1 = i2cp->i2c_register->SR1;

-  uint32_t regSR2 = i2cp->i2c_register->SR2;

-  /* return the last event value from I2C status registers */

-  return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));

-}

-

-static void i2c_serve_event_interrupt(I2CDriver *i2cp) {

-  static __IO uint8_t *txBuffp, *rxBuffp, *datap;

-

-  I2C_TypeDef *dp = i2cp->i2c_register;

-

-  switch(i2c_get_event(i2cp)) {

-  case I2C_EV5_MASTER_MODE_SELECT:

-    i2cp->flags &= ~I2C_FLG_HEADER_SENT;

-    dp->DR = i2cp->slave_addr1;

-    break;

-  case I2C_EV9_MASTER_ADDR_10BIT:

-    if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) {

-      i2cp->slave_addr1 |= 0x01;

-      i2cp->flags |= I2C_FLG_HEADER_SENT;

-    }

-    dp->DR = i2cp->slave_addr2;

-    break;

-  //------------------------------------------------------------------------

-  // Master Transmitter ----------------------------------------------------

-  //------------------------------------------------------------------------

-  case I2C_EV6_MASTER_TRA_MODE_SELECTED:

-    if(i2cp->flags & I2C_FLG_HEADER_SENT){

-      dp->CR1 |= I2C_CR1_START;               // re-send the start in 10-Bit address mode

-      break;

-    }

-    //Initialize the transmit buffer pointer

-    txBuffp = (uint8_t*)i2cp->txbuf;

-    datap = txBuffp;

-    txBuffp++;

-    i2cp->remaining_bytes--;

-    /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */

-    if(i2cp->remaining_bytes == 0) {

-      dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;

-    }

-    //EV8_1 write the first data

-    dp->DR = *datap;

-    break;

-  case I2C_EV8_MASTER_BYTE_TRANSMITTING:

-    if(i2cp->remaining_bytes > 0) {

-      datap = txBuffp;

-      txBuffp++;

-      i2cp->remaining_bytes--;

-      if(i2cp->remaining_bytes == 0) {

-        /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */

-        dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;

-      }

-      dp->DR = *datap;

-    }

-    break;

-  case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:

-    dp->CR1 |= I2C_CR1_STOP;   // stop generation

-    /* Disable ITEVT In order to not have again a BTF IT */

-    dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;

-    /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/

-    _i2c_isr_code(i2cp);

-    break;

-  //------------------------------------------------------------------------

-  // Master Receiver -------------------------------------------------------

-  //------------------------------------------------------------------------

-  case I2C_EV6_MASTER_REC_MODE_SELECTED:

-    chSysLockFromIsr();

-    switch(i2cp->flags & EV6_SUBEV_MASK) {

-    case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: // only an single byte to receive

-      /* Clear ACK */

-      dp->CR1 &= (uint16_t)~I2C_CR1_ACK;

-      /* Program the STOP */

-      dp->CR1 |= I2C_CR1_STOP;

-      break;

-    case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: // only two bytes to receive

-      /* Clear ACK */

-      dp->CR1 &= (uint16_t)~I2C_CR1_ACK;

-      /* Disable the ITBUF in order to have only the BTF interrupt */

-      dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;

-      break;

-    }

-    chSysUnlockFromIsr();

-    /* Initialize receive buffer pointer */

-    rxBuffp = i2cp->rxbuf;

-    break;

-  case I2C_EV7_MASTER_REC_BYTE_RECEIVED:

-    if(i2cp->remaining_bytes != 3) {

-      /* Read the data register */

-      *rxBuffp = dp->DR;

-      rxBuffp++;

-      i2cp->remaining_bytes--;

-      switch(i2cp->remaining_bytes){

-      case 3:

-        /* Disable the ITBUF in order to have only the BTF interrupt */

-        dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;

-        i2cp->flags |= I2C_FLG_3BTR;

-        break;

-      case 0:

-        /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/

-        _i2c_isr_code(i2cp);

-        break;

-      }

-    }

-    // when remaining 3 bytes do nothing, wait until RXNE and BTF are set (until 2 bytes are received)

-    break;

-  case I2C_EV7_MASTER_REC_BYTE_QUEUED:

-    switch(i2cp->flags & EV7_SUBEV_MASK) {

-    case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:

-      // DataN-2 and DataN-1 are received

-      chSysLockFromIsr();

-      dp->CR2 |= I2C_CR2_ITBUFEN;

-      /* Clear ACK */

-      dp->CR1 &= (uint16_t)~I2C_CR1_ACK;

-      /* Read the DataN-2*/

-      *rxBuffp = dp->DR; //This clear the RXE & BFT flags and launch the DataN reception in the shift register (ending the SCL stretch)

-      rxBuffp++;

-      /* Program the STOP */

-      dp->CR1 |= I2C_CR1_STOP;

-      /* Read the DataN-1 */

-      *rxBuffp = dp->DR;

-      chSysUnlockFromIsr();

-      rxBuffp++;

-      /* Decrement the number of readed bytes */

-      i2cp->remaining_bytes -= 2;

-      i2cp->flags = 0;

-      // ready for read DataN on the next EV7

-      break;

-    case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: // only for case of two bytes to be received

-      // DataN-1 and DataN are received

-      chSysLockFromIsr();

-      /* Program the STOP */

-      dp->CR1 |= I2C_CR1_STOP;

-      /* Read the DataN-1*/

-      *rxBuffp = dp->DR;

-      chSysUnlockFromIsr();

-      rxBuffp++;

-      /* Read the DataN*/

-      *rxBuffp = dp->DR;

-      i2cp->remaining_bytes = 0;

-      i2cp->flags = 0;

-      /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/

-      _i2c_isr_code(i2cp);

-      break;

-    }

-    break;

-  }

-}

-

-static void i2c_serve_error_interrupt(I2CDriver *i2cp) {

-  i2cflags_t flags;

-  I2C_TypeDef *reg;

-

-  reg = i2cp->i2c_register;

-  flags = I2CD_NO_ERROR;

-

-  if(reg->SR1 & I2C_SR1_BERR) {                // Bus error

-    reg->SR1 &= ~I2C_SR1_BERR;

-    flags |= I2CD_BUS_ERROR;

-  }

-  if(reg->SR1 & I2C_SR1_ARLO) {                // Arbitration lost

-    reg->SR1 &= ~I2C_SR1_ARLO;

-    flags |= I2CD_ARBITRATION_LOST;

-  }

-  if(reg->SR1 & I2C_SR1_AF) {                  // Acknowledge fail

-    reg->SR1 &= ~I2C_SR1_AF;

-    reg->CR1 |= I2C_CR1_STOP;                   // setting stop bit

-    flags |= I2CD_ACK_FAILURE;

-  }

-  if(reg->SR1 & I2C_SR1_OVR) {                 // Overrun

-    reg->SR1 &= ~I2C_SR1_OVR;

-    flags |= I2CD_OVERRUN;

-  }

-  if(reg->SR1 & I2C_SR1_PECERR) {              // PEC error

-    reg->SR1 &= ~I2C_SR1_PECERR;

-    flags |= I2CD_PEC_ERROR;

-  }

-  if(reg->SR1 & I2C_SR1_TIMEOUT) {             // SMBus Timeout

-    reg->SR1 &= ~I2C_SR1_TIMEOUT;

-    flags |= I2CD_TIMEOUT;

-  }

-  if(reg->SR1 & I2C_SR1_SMBALERT) {            // SMBus alert

-    reg->SR1 &= ~I2C_SR1_SMBALERT;

-    flags |= I2CD_SMB_ALERT;

-  }

-

-  if(flags != I2CD_NO_ERROR) {

-    // send communication end signal

-    _i2c_isr_code(i2cp);

-    chSysLockFromIsr();

-    i2cAddFlagsI(i2cp, flags);

-    chSysUnlockFromIsr();

-  }

-}

-

-#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)

-/**

- * @brief I2C1 event interrupt handler.

- */

-CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {

-

-  CH_IRQ_PROLOGUE();

-  i2c_serve_event_interrupt(&I2CD1);

-  CH_IRQ_EPILOGUE();

-}

-

-/**

- * @brief I2C1 error interrupt handler.

- */

-CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {

-

-  CH_IRQ_PROLOGUE();

-  i2c_serve_error_interrupt(&I2CD1);

-  CH_IRQ_EPILOGUE();

-}

-#endif

-

-#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)

-/**

- * @brief I2C2 event interrupt handler.

- */

-CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {

-

-  CH_IRQ_PROLOGUE();

-  i2c_serve_event_interrupt(&I2CD2);

-  CH_IRQ_EPILOGUE();

-}

-

-/**

- * @brief I2C2 error interrupt handler.

- */

-CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {

-

-  CH_IRQ_PROLOGUE();

-  i2c_serve_error_interrupt(&I2CD2);

-  CH_IRQ_EPILOGUE();

-}

-#endif

-

-void i2c_lld_reset(I2CDriver *i2cp){

-  chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),

-             "i2c_lld_reset: invalid state");

-

-  RCC->APB1RSTR     = RCC_APB1RSTR_I2C1RST;           // reset I2C 1

-  RCC->APB1RSTR     = 0;

-}

-

-void i2c_lld_set_clock(I2CDriver *i2cp, int32_t clock_speed, I2C_DutyCycle_t duty) {

-  volatile uint16_t regCCR, regCR2, freq, clock_div;

-  volatile uint16_t pe_bit_saved;

-

-  chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),

-             "i2c_lld_set_clock");

-

-  /*---------------------------- CR2 Configuration ------------------------*/

-  /* Get the I2Cx CR2 value */

-  regCR2 = i2cp->i2c_register->CR2;

-  /* Clear frequency FREQ[5:0] bits */

-  regCR2 &= (uint16_t)~I2C_CR2_FREQ;

-  /* Set frequency bits depending on pclk1 value */

-  freq = (uint16_t)(STM32_PCLK1 / 1000000);

-  chDbgCheck((freq >= 2) && (freq <= 36),

-              "i2c_lld_set_clock() : Peripheral clock freq. out of range");

-  regCR2 |= freq;

-  i2cp->i2c_register->CR2 = regCR2;

-

-  /*---------------------------- CCR Configuration ------------------------*/

-  pe_bit_saved = (i2cp->i2c_register->CR1 & I2C_CR1_PE);

-  /* Disable the selected I2C peripheral to configure TRISE */

-  i2cp->i2c_register->CR1 &= (uint16_t)~I2C_CR1_PE;

-

-  /* Clear F/S, DUTY and CCR[11:0] bits */

-  regCCR = 0;

-  clock_div = I2C_CCR_CCR;

-  /* Configure clock_div in standard mode */

-  if (clock_speed <= 100000) {

-    chDbgAssert(duty == stdDutyCycle,

-                "i2c_lld_set_clock(), #3", "Invalid standard mode duty cycle");

-    /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */

-    clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));

-    /* Test if CCR value is under 0x4, and set the minimum allowed value */

-    if (clock_div < 0x04) clock_div = 0x04;

-    /* Set clock_div value for standard mode */

-    regCCR |= (clock_div & I2C_CCR_CCR);

-    /* Set Maximum Rise Time for standard mode */

-    i2cp->i2c_register->TRISE = freq + 1;

-  }

-  /* Configure clock_div in fast mode */

-  else if(clock_speed <= 400000) {

-    chDbgAssert((duty == fastDutyCycle_2) || (duty == fastDutyCycle_16_9),

-                "i2c_lld_set_clock(), #3", "Invalid fast mode duty cycle");

-    if(duty == fastDutyCycle_2) {

-      /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */

-      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));

-    }

-    else if(duty == fastDutyCycle_16_9) {

-      /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */

-      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));

-      /* Set DUTY bit */

-      regCCR |= I2C_CCR_DUTY;

-    }

-    /* Test if CCR value is under 0x1, and set the minimum allowed value */

-    if(clock_div < 0x01) clock_div = 0x01;

-    /* Set clock_div value and F/S bit for fast mode*/

-    regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));

-    /* Set Maximum Rise Time for fast mode */

-    i2cp->i2c_register->TRISE = (freq * 300 / 1000) + 1;

-  }

-  chDbgAssert((clock_div <= I2C_CCR_CCR),

-      "i2c_lld_set_clock(), #2", "Too low clock clock speed selected");

-

-  /* Write to I2Cx CCR */

-  i2cp->i2c_register->CCR = regCCR;

-

-  /* restore the I2C peripheral enabled state */

-  i2cp->i2c_register->CR1 |= pe_bit_saved;

-}

-

-void i2c_lld_set_opmode(I2CDriver *i2cp, I2C_opMode_t opmode) {

-  uint16_t regCR1;

-

-  /*---------------------------- CR1 Configuration ------------------------*/

-  /* Get the I2Cx CR1 value */

-  regCR1 = i2cp->i2c_register->CR1;

-  switch(opmode){

-  case opmodeI2C:

-    regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);

-    break;

-  case opmodeSMBusDevice:

-    regCR1 |= I2C_CR1_SMBUS;

-    regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);

-    break;

-  case opmodeSMBusHost:

-    regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);

-    break;

-  }

-  /* Write to I2Cx CR1 */

-  i2cp->i2c_register->CR1 = regCR1;

-}

-

-void i2c_lld_set_own_address(I2CDriver *i2cp, int16_t address, int8_t nbit_addr) {

-  /*---------------------------- OAR1 Configuration -----------------------*/

-  /* Set the Own Address1 and bit number address acknowledged */

-  i2cp->i2c_register->OAR1 = address & I2C_OAR1_ADD0_9;

-  switch(nbit_addr) {

-  case 10:

-    i2cp->i2c_register->OAR1 |= I2C_OAR1_ADDMODE;  // set ADDMODE bit and bit 14.

-  case 7:

-    i2cp->i2c_register->OAR1 |= I2C_OAR1_BIT14;     // set only bit 14.

-  }

-}

-

-/**

- * @brief Low level I2C driver initialization.

- */

-void i2c_lld_init(void) {

-

-#if STM32_I2C_USE_I2C1

-  RCC->APB1RSTR     = RCC_APB1RSTR_I2C1RST;           // reset I2C 1

-  RCC->APB1RSTR     = 0;

-  i2cObjectInit(&I2CD1);

-  I2CD1.i2c_register = I2C1;

-#endif

-#if STM32_I2C_USE_I2C2

-  RCC->APB1RSTR     = RCC_APB1RSTR_I2C2RST;           // reset I2C 2

-  RCC->APB1RSTR     = 0;

-  i2cObjectInit(&I2CD2);

-  I2CD2.i2c_register = I2C2;

-#endif

-}

-

-/**

- * @brief Configures and activates the I2C peripheral.

- *

- * @param[in] i2cp      pointer to the @p I2CDriver object

- */

-void i2c_lld_start(I2CDriver *i2cp) {

-  chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),

-             "i2c_lld_start: invalid state");

-

-  /* If in stopped state then enables the I2C clock.*/

-  if (i2cp->state == I2C_STOP) {

-#if STM32_I2C_USE_I2C1

-    if (&I2CD1 == i2cp) {

-      NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);

-      NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);

-      RCC->APB1ENR |= RCC_APB1ENR_I2C1EN;                       // I2C 1 clock enable

-    }

-#endif

-#if STM32_I2C_USE_I2C2

-    if (&I2CD2 == i2cp) {

-      NVICEnableVector(I2C2_EV_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);

-      NVICEnableVector(I2C2_ER_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);

-      RCC->APB1ENR |= RCC_APB1ENR_I2C2EN;                       // I2C 2 clock enable

-    }

-#endif

-    i2cp->i2c_register->CR1 |= I2C_CR1_PE;                  // enable I2C peripheral

-  }

-}

-

-/**

- * @brief Deactivates the I2C peripheral.

- *

- * @param[in] i2cp      pointer to the @p I2CDriver object

- */

-void i2c_lld_stop(I2CDriver *i2cp) {

-

-  chDbgCheck((i2cp->state == I2C_READY),

-             "i2c_lld_stop: invalid state");

-

-  /* I2C disable.*/

-   i2cp->i2c_register->CR1 = 0;

-

-  /* If in ready state then disables the I2C clock.*/

-  if (i2cp->state == I2C_READY) {

-#if STM32_I2C_USE_I2C1

-    if (&I2CD1 == i2cp) {

-      NVICDisableVector(I2C1_EV_IRQn);

-      NVICDisableVector(I2C1_ER_IRQn);

-      RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;

-    }

-#endif

-#if STM32_I2C_USE_I2C2

-    if (&I2CD2 == i2cp) {

-      NVICDisableVector(I2C2_EV_IRQn);

-      NVICDisableVector(I2C2_ER_IRQn);

-      RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;

-    }

-#endif

-  }

-}

-

-/**

- * @brief Transmits data ever the I2C bus as master.

- *

- * @param[in] i2cp          pointer to the @p I2CDriver object

- * @param[in] n             number of words to send

- * @param[in] slave_addr1   the 7-bit address of the slave (should be aligned to left)

- * @param[in] slave_addr2   used in 10 bit address mode

- * @param[in] txbuf         the pointer to the transmit buffer

- *

- */

-void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf) {

-

-  // enable ERR, EVT & BUF ITs

-  i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);

-  i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;

-

-  switch(i2cp->nbit_address){

-  case 7:

-    i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE);    // LSB = 0 -> write

-    break;

-  case 10:

-    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);  // add the two msb of 10-bit address to the header

-    i2cp->slave_addr1 |= 0xF0;                        // add the header bits with LSB = 0 -> write

-    i2cp->slave_addr2 = slave_addr & 0x00FF;          // the remaining 8 bit of 10-bit address

-    break;

-  }

-

-  i2cp->txbuf = txbuf;

-  i2cp->remaining_bytes = n;

-  i2cp->flags = 0;

-  i2cp->errors = 0;

-

-  i2cp->i2c_register->CR1 |= I2C_CR1_START;               // send start bit

-

-#if !I2C_USE_WAIT

-  /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */

-  uint32_t tmo = 0xfffff;

-  while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)

-    ;

-#endif /* I2C_USE_WAIT */

-}

-

-/**

- * @brief Receives data from the I2C bus.

- *

- * @param[in] i2cp          pointer to the @p I2CDriver object

- * @param[in] slave_addr1   7-bit address of he slave

- * @param[in] slave_addr2   used in 10-bit address mode

- * @param[in] n             number of words to receive

- * @param[out] rxbuf        the pointer to the receive buffer

- *

- */

-void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf) {

-  // enable ERR, EVT & BUF ITs

-  i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);

-  i2cp->i2c_register->CR1 |= I2C_CR1_ACK;                 // acknowledge returned

-  i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;

-

-  switch(i2cp->nbit_address){

-  case 7:

-    i2cp->slave_addr1 = ((slave_addr <<1) | 0x01);  // LSB = 1 -> receive

-    break;

-  case 10:

-    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);  // add the two msb of 10-bit address to the header

-    i2cp->slave_addr1 |= 0xF0;                        // add the header bits (the LSB -> 1 will be add to second

-    i2cp->slave_addr2 = slave_addr & 0x00FF;          // the remaining 8 bit of 10-bit address

-    break;

-  }

-

-  i2cp->rxbuf = rxbuf;

-  i2cp->remaining_bytes = n;

-  i2cp->flags = I2C_FLG_MASTER_RECEIVER;

-  i2cp->errors = 0;

-

-  // Only one byte to be received

-  if(i2cp->remaining_bytes == 1) {

-    i2cp->flags |= I2C_FLG_1BTR;

-  }

-  // Only two bytes to be received

-  else if(i2cp->remaining_bytes == 2) {

-    i2cp->flags |= I2C_FLG_2BTR;

-    i2cp->i2c_register->CR1 |= I2C_CR1_POS;            // Acknowledge Position

-  }

-

-  i2cp->i2c_register->CR1 |= I2C_CR1_START;            // send start bit

-

-#if !I2C_USE_WAIT

-  /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */

-  uint32_t tmo = 0xfffff;

-  while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)

-    ;

-#endif /* I2C_USE_WAIT */

-}

-

-#endif // HAL_USE_I2C

-