diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-06-15 15:58:20 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-06-15 15:58:20 +0000 |
| commit | 7c68ef157d009f9932ac47ba21ba5d74e321623f (patch) | |
| tree | 6c2442ca44cd090656ec3059ffb959f3d747e18d /os/hal/platforms/SPC563Mxx/platform.dox | |
| parent | 076746af63d317f8e96766b9137a65679f60463f (diff) | |
| parent | e0d850113610f3efa0c0ac4946901f683e5e7332 (diff) | |
| download | ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.tar.gz ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.tar.bz2 ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.zip | |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@5854 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/platforms/SPC563Mxx/platform.dox')
| -rw-r--r-- | os/hal/platforms/SPC563Mxx/platform.dox | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/os/hal/platforms/SPC563Mxx/platform.dox b/os/hal/platforms/SPC563Mxx/platform.dox new file mode 100644 index 000000000..21401e88d --- /dev/null +++ b/os/hal/platforms/SPC563Mxx/platform.dox @@ -0,0 +1,64 @@ +/*
+ * Licensed under ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @defgroup SPC563 SPC563Mx Drivers
+ * @details This section describes all the supported drivers on the
+ * SPC563Mx/MPC563xM platform and the implementation details
+ * of the single drivers.
+ *
+ * @ingroup platforms
+ */
+
+/**
+ * @defgroup SPC563_HAL SPC563Mx Initialization Support
+ * @details The SPC563Mx/MPC563xM HAL support is responsible for system
+ * initialization.
+ *
+ * @section spc563_hal_1 Supported HW resources
+ * - FMPLL.
+ * - INTC.
+ * - XBAR.
+ * - CFLASH0.
+ * .
+ * @section spc563_hal_2 SPC563Mx HAL driver implementation features
+ * - FMPLL startup and stabilization.
+ * - Clock tree initialization.
+ * - Clock source selection.
+ * - Flash wait states initialization based on the selected clock options.
+ * - SYSTICK initialization based on current clock and kernel required rate.
+ * - DMA support initialization.
+ * .
+ * @ingroup SPC563
+ */
+
+/**
+ * @defgroup SPC563_SERIAL SPC563Mx Serial Support
+ * @details The SPC563Mx/MPC563xM Serial driver uses the ESCI peripherals
+ * in a buffered, interrupt driven, implementation.
+ *
+ * @section spc563_serial_1 Supported HW resources
+ * The serial driver can support any of the following hardware resources:
+ * - ESCIA.
+ * - ESCIB.
+ * .
+ * @section spc563_serial_2 SPC563Mx Serial driver implementation features
+ * - Clock stop for reduced power usage when the driver is in stop state.
+ * - Each ESCI can be independently enabled and programmed. Unused
+ * peripherals are left in low power mode.
+ * - Fully interrupt driven.
+ * - Programmable priority levels for each ESCI.
+ * .
+ * @ingroup SPC563
+ */
|