git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 155 insertions, 0 deletions

diff --git a/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c
new file mode 100644
index 000000000..d25d93d20
--- /dev/null
+++ b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c
@@ -0,0 +1,59 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#include "ch.h"

+#include "hal.h"

+

+/**

+ * @brief   PAL setup.

+ * @details Digital I/O ports static configuration as defined in @p board.h.

+ *          This variable is used by the HAL when initializing the PAL driver.

+ */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+const PALConfig pal_default_config = {

+ {VAL_GPIO0DATA, VAL_GPIO0DIR},

+ {VAL_GPIO1DATA, VAL_GPIO1DIR},

+ {VAL_GPIO2DATA, VAL_GPIO2DIR},

+ {VAL_GPIO3DATA, VAL_GPIO3DIR},

+};

+#endif

+

+/*

+ * Early initialization code.

+ * This initialization must be performed just after stack setup and before

+ * any other initialization.

+ */

+void __early_init(void) {

+

+  LPC13xx_clock_init();

+}

+

+/*

+ * Board-specific initialization code.

+ */

+void boardInit(void) {

+

+  /*

+   * Extra, board-specific, initializations.

+   * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG

+   *       you must comment that line first.

+   */

+  LPC_IOCON->PIO0_7 = 0xC0;             /* Disables pull-up on LED2 output. */

+  LPC_IOCON->R_PIO1_2 = 0xC1;           /* Disables pull-up on LED3B output

+                                           and makes it GPIO1_2.            */

+  LPC_IOCON->PIO1_9 = 0xC0;             /* Disables pull-up on LED3R output.*/

+  LPC_IOCON->PIO1_10 = 0xC0;            /* Disables pull-up on LED3G output.*/

+}

diff --git a/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h
new file mode 100644
index 000000000..b5ad73dbd
--- /dev/null
+++ b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h
@@ -0,0 +1,91 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#ifndef _BOARD_H_

+#define _BOARD_H_

+

+/*

+ * Setup for Embedded Artists LPCXpresso Base Board with LPC1343 daughter

+ * board.

+ */

+

+/*

+ * Board identifiers.

+ */

+#define BOARD_EA_BB_LPC1343

+#define BOARD_NAME "Embedded Artists LPCXpresso Base Board + LPC1343"

+

+/*

+ * Board frequencies.

+ */

+#define SYSOSCCLK               12000000

+

+/*

+ * GPIO 0 initial setup.

+ */

+#define VAL_GPIO0DIR            PAL_PORT_BIT(GPIO0_OLEDSEL) |               \

+                                PAL_PORT_BIT(GPIO0_LED2)

+#define VAL_GPIO0DATA           PAL_PORT_BIT(GPIO0_OLEDSEL) |               \

+                                PAL_PORT_BIT(GPIO0_LED2)

+

+/*

+ * GPIO 1 initial setup.

+ */

+#define VAL_GPIO1DIR            PAL_PORT_BIT(GPIO1_LED3B)   |               \

+                                PAL_PORT_BIT(GPIO1_LED3R)   |               \

+                                PAL_PORT_BIT(GPIO1_LED3G)   |               \

+                                PAL_PORT_BIT(GPIO1_SPI0SEL)

+#define VAL_GPIO1DATA           PAL_PORT_BIT(GPIO1_LED3B)   |               \

+                                PAL_PORT_BIT(GPIO1_LED3R)   |               \

+                                PAL_PORT_BIT(GPIO1_LED3G)   |               \

+                                PAL_PORT_BIT(GPIO1_SPI0SEL)

+

+/*

+ * GPIO 2 initial setup.

+ */

+#define VAL_GPIO2DIR            0x00000000

+#define VAL_GPIO2DATA           0x00000000

+

+/*

+ * GPIO 3 initial setup.

+ */

+#define VAL_GPIO3DIR            0x00000000

+#define VAL_GPIO3DATA           0x00000000

+

+/*

+ * Pin definitions.

+ */

+#define GPIO0_SW3               1

+#define GPIO0_OLEDSEL           2

+#define GPIO0_LED2              7

+

+#define GPIO1_LED3B             2

+#define GPIO1_SW4               4

+#define GPIO1_LED3R             9

+#define GPIO1_LED3G             10

+#define GPIO1_SPI0SEL           11

+

+#if !defined(_FROM_ASM_)

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void boardInit(void);

+#ifdef __cplusplus

+}

+#endif

+#endif /* _FROM_ASM_ */

+

+#endif /* _BOARD_H_ */

diff --git a/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.mk b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.mk
new file mode 100644
index 000000000..da59e98c4
--- /dev/null
+++ b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.

+BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343/board.c

+

+# Required include directories

+BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343