More demos updated.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12382 110e8d01-0319-4d1e-a829-52ad28d1bb01
author: gdisirio <gdisirio@110e8d01-0319-4d1e-a829-52ad28d1bb01> 2018-10-21 17:00:36 +0000
committer: gdisirio <gdisirio@110e8d01-0319-4d1e-a829-52ad28d1bb01> 2018-10-21 17:00:36 +0000
commit: 7dd779520635144a79181c0383f1c4be3e06b38e (patch)
tree: 3973fc4b9a1b2927d4fedf21aaa27879e0a1994e /demos
parent: 03b9e4ed20e3909b327e3f88cface7ecf0bc2b4a (diff)
download: ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.tar.gz
ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.tar.bz2
ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.zip
40 files changed, 2148 insertions, 822 deletions
diff --git a/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/chconf.h b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/chconf.h
new file mode 100644
index 000000000..d0a50e1be
--- /dev/null
+++ b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/chconf.h
@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     TRUE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                TRUE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    TRUE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  TRUE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/demos/STM32/RT-STM32F207-DISCOVERY/halconf.h b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F207-DISCOVERY/halconf.h
+++ b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/mcuconf.h b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/mcuconf.h
new file mode 100644
index 000000000..c30e375c0
--- /dev/null
+++ b/demos/STM32/RT-STM32F091RC-NUCLEO64/cfg/mcuconf.h
@@ -0,0 +1,253 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_IRQ_EXTI16_IRQ_PRIORITY       3
+#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY    3
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         3
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 3)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM6_IRQ_PRIORITY         2
+#define STM32_GPT_TIM7_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USE_UART7              FALSE
+#define STM32_SERIAL_USE_UART8              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+#define STM32_SERIAL_USART3_8_PRIORITY      3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USE_UART7                FALSE
+#define STM32_UART_USE_UART8                FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART3_8_IRQ_PRIORITY    3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_UART7_DMA_PRIORITY       0
+#define STM32_UART_UART8_DMA_PRIORITY       0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART7_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART7_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART8_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_UART8_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */
diff --git a/demos/STM32/RT-STM32F207-DISCOVERY/Makefile b/demos/STM32/RT-STM32F207-DISCOVERY/Makefile
index 3ee08428d..705c9109f 100644
--- a/demos/STM32/RT-STM32F207-DISCOVERY/Makefile
+++ b/demos/STM32/RT-STM32F207-DISCOVERY/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m3
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m3
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F207-DISCOVERY/chconf.h b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F207-DISCOVERY/chconf.h
+++ b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F207ZG-NUCLEO144/halconf.h b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F207ZG-NUCLEO144/halconf.h
+++ b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F207-DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/mcuconf.h
index 70897bdfd..70897bdfd 100644
--- a/demos/STM32/RT-STM32F207-DISCOVERY/mcuconf.h
+++ b/demos/STM32/RT-STM32F207-DISCOVERY/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F207ZG-NUCLEO144/Makefile b/demos/STM32/RT-STM32F207ZG-NUCLEO144/Makefile
index d5a02d2dc..08dc4c351 100644
--- a/demos/STM32/RT-STM32F207ZG-NUCLEO144/Makefile
+++ b/demos/STM32/RT-STM32F207ZG-NUCLEO144/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m3
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,11 +106,12 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
 include $(CHIBIOS)/test/oslib/oslib_test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
 
 # Define linker script file here
 LDSCRIPT= $(STARTUPLD)/STM32F207xG.ld
@@ -119,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m3
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -208,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F207ZG-NUCLEO144/chconf.h b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F207ZG-NUCLEO144/chconf.h
+++ b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F302R8-NUCLEO64/halconf.h b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F302R8-NUCLEO64/halconf.h
+++ b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F207ZG-NUCLEO144/mcuconf.h b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/mcuconf.h
index 819c260ec..819c260ec 100644
--- a/demos/STM32/RT-STM32F207ZG-NUCLEO144/mcuconf.h
+++ b/demos/STM32/RT-STM32F207ZG-NUCLEO144/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F302R8-NUCLEO64/Makefile b/demos/STM32/RT-STM32F302R8-NUCLEO64/Makefile
index ad0bb77c0..5234bf354 100644
--- a/demos/STM32/RT-STM32F302R8-NUCLEO64/Makefile
+++ b/demos/STM32/RT-STM32F302R8-NUCLEO64/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F302R8-NUCLEO64/chconf.h b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F302R8-NUCLEO64/chconf.h
+++ b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F303K8-NUCLEO32/halconf.h b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F303K8-NUCLEO32/halconf.h
+++ b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/mcuconf.h b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/mcuconf.h
new file mode 100644
index 000000000..a6a190cdb
--- /dev/null
+++ b/demos/STM32/RT-STM32F302R8-NUCLEO64/cfg/mcuconf.h
@@ -0,0 +1,253 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY            6
+#define STM32_IRQ_EXTI1_PRIORITY            6
+#define STM32_IRQ_EXTI2_PRIORITY            6
+#define STM32_IRQ_EXTI3_PRIORITY            6
+#define STM32_IRQ_EXTI4_PRIORITY            6
+#define STM32_IRQ_EXTI5_9_PRIORITY          6
+#define STM32_IRQ_EXTI10_15_PRIORITY        6
+#define STM32_IRQ_EXTI16_PRIORITY           6
+#define STM32_IRQ_EXTI17_PRIORITY           6
+#define STM32_IRQ_EXTI18_PRIORITY           6
+#define STM32_IRQ_EXTI19_PRIORITY           6
+#define STM32_IRQ_EXTI20_PRIORITY           6
+#define STM32_IRQ_EXTI21_22_29_PRIORITY     6
+#define STM32_IRQ_EXTI30_32_PRIORITY        6
+#define STM32_IRQ_EXTI33_PRIORITY           6
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */
diff --git a/demos/STM32/RT-STM32F302R8-NUCLEO64/mcuconf.h b/demos/STM32/RT-STM32F302R8-NUCLEO64/mcuconf.h
deleted file mode 100644
index 13341df65..000000000
--- a/demos/STM32/RT-STM32F302R8-NUCLEO64/mcuconf.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   FALSE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSI
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  12
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_USART2SW                      STM32_USART2SW_PCLK
-#define STM32_USART3SW                      STM32_USART3SW_PCLK
-#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
-#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY            6
-#define STM32_IRQ_EXTI1_PRIORITY            6
-#define STM32_IRQ_EXTI2_PRIORITY            6
-#define STM32_IRQ_EXTI3_PRIORITY            6
-#define STM32_IRQ_EXTI4_PRIORITY            6
-#define STM32_IRQ_EXTI5_9_PRIORITY          6
-#define STM32_IRQ_EXTI10_15_PRIORITY        6
-#define STM32_IRQ_EXTI16_PRIORITY           6
-#define STM32_IRQ_EXTI17_PRIORITY           6
-#define STM32_IRQ_EXTI18_PRIORITY           6
-#define STM32_IRQ_EXTI19_PRIORITY           6
-#define STM32_IRQ_EXTI20_PRIORITY           6
-#define STM32_IRQ_EXTI21_22_29_PRIORITY     6
-#define STM32_IRQ_EXTI30_32_PRIORITY        6
-#define STM32_IRQ_EXTI33_PRIORITY           6
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_COMPACT_SAMPLES           FALSE
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC12_IRQ_PRIORITY        5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE                 FALSE
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#define STM32_DAC_USE_DAC2_CH1              TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
-#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
-#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM6                  FALSE
-#define STM32_GPT_USE_TIM7                  FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM6_IRQ_PRIORITY         7
-#define STM32_GPT_TIM7_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         10
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             TRUE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */
diff --git a/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile b/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile
index 0b35f7812..deedc2b67 100644
--- a/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile
+++ b/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F303K8-NUCLEO32/chconf.h b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F303K8-NUCLEO32/chconf.h
+++ b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F303RE-NUCLEO64/halconf.h b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F303RE-NUCLEO64/halconf.h
+++ b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F303K8-NUCLEO32/mcuconf.h b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/mcuconf.h
index e2e79a526..e2e79a526 100644
--- a/demos/STM32/RT-STM32F303K8-NUCLEO32/mcuconf.h
+++ b/demos/STM32/RT-STM32F303K8-NUCLEO32/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F303RE-NUCLEO64/Makefile b/demos/STM32/RT-STM32F303RE-NUCLEO64/Makefile
index bfd5c64f4..af0d6f9b4 100644
--- a/demos/STM32/RT-STM32F303RE-NUCLEO64/Makefile
+++ b/demos/STM32/RT-STM32F303RE-NUCLEO64/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F303RE-NUCLEO64/chconf.h b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F303RE-NUCLEO64/chconf.h
+++ b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F303ZE-NUCLEO144/halconf.h b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F303ZE-NUCLEO144/halconf.h
+++ b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F303RE-NUCLEO64/mcuconf.h b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/mcuconf.h
index ef132ceaf..ef132ceaf 100644
--- a/demos/STM32/RT-STM32F303RE-NUCLEO64/mcuconf.h
+++ b/demos/STM32/RT-STM32F303RE-NUCLEO64/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F303ZE-NUCLEO144/Makefile b/demos/STM32/RT-STM32F303ZE-NUCLEO144/Makefile
index 72ea0b1ff..1e7300a67 100644
--- a/demos/STM32/RT-STM32F303ZE-NUCLEO144/Makefile
+++ b/demos/STM32/RT-STM32F303ZE-NUCLEO144/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F303ZE-NUCLEO144/chconf.h b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F303ZE-NUCLEO144/chconf.h
+++ b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F334-DISCOVERY/halconf.h b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F334-DISCOVERY/halconf.h
+++ b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F303ZE-NUCLEO144/mcuconf.h b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/mcuconf.h
index 92be9f8aa..92be9f8aa 100644
--- a/demos/STM32/RT-STM32F303ZE-NUCLEO144/mcuconf.h
+++ b/demos/STM32/RT-STM32F303ZE-NUCLEO144/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F334-DISCOVERY/Makefile b/demos/STM32/RT-STM32F334-DISCOVERY/Makefile
index 686399775..e8acaea55 100644
--- a/demos/STM32/RT-STM32F334-DISCOVERY/Makefile
+++ b/demos/STM32/RT-STM32F334-DISCOVERY/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F334-DISCOVERY/chconf.h b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F334-DISCOVERY/chconf.h
+++ b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F334R8-NUCLEO64/halconf.h b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F334R8-NUCLEO64/halconf.h
+++ b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F334-DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/mcuconf.h
index a35065a6f..a35065a6f 100644
--- a/demos/STM32/RT-STM32F334-DISCOVERY/mcuconf.h
+++ b/demos/STM32/RT-STM32F334-DISCOVERY/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F334R8-NUCLEO64/Makefile b/demos/STM32/RT-STM32F334R8-NUCLEO64/Makefile
index 5a6f16e2c..79d3cd805 100644
--- a/demos/STM32/RT-STM32F334R8-NUCLEO64/Makefile
+++ b/demos/STM32/RT-STM32F334R8-NUCLEO64/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F334R8-NUCLEO64/chconf.h b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F334R8-NUCLEO64/chconf.h
+++ b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F373-STM32373C_EVAL/halconf.h b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/halconf.h
index 89be0946a..89be0946a 100644
--- a/demos/STM32/RT-STM32F373-STM32373C_EVAL/halconf.h
+++ b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/halconf.h
diff --git a/demos/STM32/RT-STM32F334R8-NUCLEO64/mcuconf.h b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h
index a35065a6f..a35065a6f 100644
--- a/demos/STM32/RT-STM32F334R8-NUCLEO64/mcuconf.h
+++ b/demos/STM32/RT-STM32F334R8-NUCLEO64/cfg/mcuconf.h
diff --git a/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile b/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile
index aeba7805b..6b417d997 100644
--- a/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile
+++ b/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),)
   USE_CPPOPT = -fno-rtti
 endif
 
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
 ifeq ($(USE_LINK_GC),)
   USE_LINK_GC = yes
 endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),)
   USE_LDOPT = 
 endif
 
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
 ifeq ($(USE_LTO),)
   USE_LTO = yes
 endif
 
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
 # Enable this if you want to see the full log while compiling.
 ifeq ($(USE_VERBOSE_COMPILE),)
   USE_VERBOSE_COMPILE = no
@@ -74,19 +69,30 @@ ifeq ($(USE_FPU),)
   USE_FPU = no
 endif
 
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+  USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
 #
 # Architecture or project specific options
 ##############################################################################
 
 ##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
 #
 
 # Define project name here
 PROJECT = ch
 
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU  = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS  := ../../..
+CONFDIR  := ./cfg
+BUILDDIR := ./build
+DEPDIR   := ./.dep
 
 # Licensing files.
 include $(CHIBIOS)/os/license/license.mk
@@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk
 # RTOS files (optional).
 include $(CHIBIOS)/os/rt/rt.mk
 include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
 # Other files (optional).
 include $(CHIBIOS)/test/lib/test.mk
 include $(CHIBIOS)/test/rt/rt_test.mk
@@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \
 # setting.
 CPPSRC = $(ALLCPPSRC)
 
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
+# List ASM source files here.
 ASMSRC = $(ALLASMSRC)
-ASMXSRC = $(ALLXASMSRC)
-
-INCDIR = $(ALLINC) $(TESTINC)
 
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
 
-MCU  = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
 
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
 CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
 
-# Define C++ warning options here
+# Define C++ warning options here.
 CPPWARN = -Wall -Wextra -Wundef
 
 #
-# Compiler settings
+# Project, target, sources and paths
 ##############################################################################
 
 ##############################################################################
@@ -207,8 +165,25 @@ ULIBDIR =
 ULIBS =
 
 #
-# End of user defines
+# End of user section
+##############################################################################
+
 ##############################################################################
+# Common rules
+#
 
 RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
 include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F373-STM32373C_EVAL/chconf.h b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/chconf.h
index a7343edc2..a7343edc2 100644
--- a/demos/STM32/RT-STM32F373-STM32373C_EVAL/chconf.h
+++ b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/chconf.h
diff --git a/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/halconf.h b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/halconf.h
new file mode 100644
index 000000000..89be0946a
--- /dev/null
+++ b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/halconf.h
@@ -0,0 +1,532 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_6_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/demos/STM32/RT-STM32F373-STM32373C_EVAL/mcuconf.h b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/mcuconf.h
index 0a5deff96..0a5deff96 100644
--- a/demos/STM32/RT-STM32F373-STM32373C_EVAL/mcuconf.h
+++ b/demos/STM32/RT-STM32F373-STM32373C_EVAL/cfg/mcuconf.h
author	gdisirio <gdisirio@110e8d01-0319-4d1e-a829-52ad28d1bb01>	2018-10-21 17:00:36 +0000
committer	gdisirio <gdisirio@110e8d01-0319-4d1e-a829-52ad28d1bb01>	2018-10-21 17:00:36 +0000
commit	7dd779520635144a79181c0383f1c4be3e06b38e (patch)
tree	3973fc4b9a1b2927d4fedf21aaa27879e0a1994e /demos
parent	03b9e4ed20e3909b327e3f88cface7ecf0bc2b4a (diff)
download	ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.tar.gz ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.tar.bz2 ChibiOS-7dd779520635144a79181c0383f1c4be3e06b38e.zip