diff options
| author | Rocco Marco Guglielmi <roccomarco.guglielmi@live.com> | 2016-04-10 22:59:53 +0000 |
|---|---|---|
| committer | Rocco Marco Guglielmi <roccomarco.guglielmi@live.com> | 2016-04-10 22:59:53 +0000 |
| commit | 8961963e6a21d3be99919d1567e8cbc4e9f8a412 (patch) | |
| tree | 19b07a014538fb82c4a09cb3c7ba50374e78925c /demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h | |
| parent | 3dea21bb83ff98f9a87b6caafd43fd680f058867 (diff) | |
| download | ChibiOS-8961963e6a21d3be99919d1567e8cbc4e9f8a412.tar.gz ChibiOS-8961963e6a21d3be99919d1567e8cbc4e9f8a412.tar.bz2 ChibiOS-8961963e6a21d3be99919d1567e8cbc4e9f8a412.zip | |
Added ARD labels in STM32 Nucleo-64 board files
Renamed board from ST_NUCLEO_XXXX to ST_NUCLEO64_XXXX
Renamed ST Nucleo demos
Updated makefiles with new board file paths
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9278 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h')
| -rw-r--r-- | demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h b/demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h new file mode 100644 index 000000000..e47f6600d --- /dev/null +++ b/demos/STM32/RT-STM32F030R8-NUCLEO64/mcuconf.h @@ -0,0 +1,191 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV STM32_PLLNODIV_DIV2
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1 FALSE
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \
+ STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \
+ STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY 2
+#define STM32_I2S_SPI2_IRQ_PRIORITY 2
+#define STM32_I2S_SPI1_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 3
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
|