git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6180 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 2127 deletions

diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h
deleted file mode 100644
index 5a8e51970..000000000
--- a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h
+++ /dev/null
@@ -1,2127 +0,0 @@
-/**

- * @file

- *

- * lwIP Options Configuration

- */

-

-/*

- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.

- * All rights reserved. 

- * 

- * Redistribution and use in source and binary forms, with or without modification, 

- * are permitted provided that the following conditions are met:

- *

- * 1. Redistributions of source code must retain the above copyright notice,

- *    this list of conditions and the following disclaimer.

- * 2. Redistributions in binary form must reproduce the above copyright notice,

- *    this list of conditions and the following disclaimer in the documentation

- *    and/or other materials provided with the distribution.

- * 3. The name of the author may not be used to endorse or promote products

- *    derived from this software without specific prior written permission. 

- *

- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 

- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 

- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 

- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 

- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 

- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 

- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 

- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 

- * OF SUCH DAMAGE.

- *

- * This file is part of the lwIP TCP/IP stack.

- * 

- * Author: Adam Dunkels <adam@sics.se>

- *

- */

-#ifndef __LWIPOPT_H__

-#define __LWIPOPT_H__

-

-

-/*

-   -----------------------------------------------

-   ---------- Platform specific locking ----------

-   -----------------------------------------------

-*/

-

-/**

- * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain

- * critical regions during buffer allocation, deallocation and memory

- * allocation and deallocation.

- */

-#ifndef SYS_LIGHTWEIGHT_PROT

-#define SYS_LIGHTWEIGHT_PROT            0

-#endif

-

-/** 

- * NO_SYS==1: Provides VERY minimal functionality. Otherwise,

- * use lwIP facilities.

- */

-#ifndef NO_SYS

-#define NO_SYS                          0

-#endif

-

-/**

- * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1

- * Mainly for compatibility to old versions.

- */

-#ifndef NO_SYS_NO_TIMERS

-#define NO_SYS_NO_TIMERS                0

-#endif

-

-/**

- * MEMCPY: override this if you have a faster implementation at hand than the

- * one included in your C library

- */

-#ifndef MEMCPY

-#define MEMCPY(dst,src,len)             memcpy(dst,src,len)

-#endif

-

-/**

- * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a

- * call to memcpy() if the length is known at compile time and is small.

- */

-#ifndef SMEMCPY

-#define SMEMCPY(dst,src,len)            memcpy(dst,src,len)

-#endif

-

-/*

-   ------------------------------------

-   ---------- Memory options ----------

-   ------------------------------------

-*/

-/**

- * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library

- * instead of the lwip internal allocator. Can save code size if you

- * already use it.

- */

-#ifndef MEM_LIBC_MALLOC

-#define MEM_LIBC_MALLOC                 0

-#endif

-

-/**

-* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.

-* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution

-* speed and usage from interrupts!

-*/

-#ifndef MEMP_MEM_MALLOC

-#define MEMP_MEM_MALLOC                 0

-#endif

-

-/**

- * MEM_ALIGNMENT: should be set to the alignment of the CPU

- *    4 byte alignment -> #define MEM_ALIGNMENT 4

- *    2 byte alignment -> #define MEM_ALIGNMENT 2

- */

-#ifndef MEM_ALIGNMENT

-#define MEM_ALIGNMENT                   4

-#endif

-

-/**

- * MEM_SIZE: the size of the heap memory. If the application will send

- * a lot of data that needs to be copied, this should be set high.

- */

-#ifndef MEM_SIZE

-#define MEM_SIZE                        1600

-#endif

-

-/**

- * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.

- * This can be used to individually change the location of each pool.

- * Default is one big array for all pools

- */

-#ifndef MEMP_SEPARATE_POOLS

-#define MEMP_SEPARATE_POOLS             0

-#endif

-

-/**

- * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable

- * amount of bytes before and after each memp element in every pool and fills

- * it with a prominent default value.

- *    MEMP_OVERFLOW_CHECK == 0 no checking

- *    MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed

- *    MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time

- *      memp_malloc() or memp_free() is called (useful but slow!)

- */

-#ifndef MEMP_OVERFLOW_CHECK

-#define MEMP_OVERFLOW_CHECK             0

-#endif

-

-/**

- * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make

- * sure that there are no cycles in the linked lists.

- */

-#ifndef MEMP_SANITY_CHECK

-#define MEMP_SANITY_CHECK               0

-#endif

-

-/**

- * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set

- * of memory pools of various sizes. When mem_malloc is called, an element of

- * the smallest pool that can provide the length needed is returned.

- * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.

- */

-#ifndef MEM_USE_POOLS

-#define MEM_USE_POOLS                   0

-#endif

-

-/**

- * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next

- * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more

- * reliable. */

-#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL

-#define MEM_USE_POOLS_TRY_BIGGER_POOL   0

-#endif

-

-/**

- * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h

- * that defines additional pools beyond the "standard" ones required

- * by lwIP. If you set this to 1, you must have lwippools.h in your 

- * inlude path somewhere. 

- */

-#ifndef MEMP_USE_CUSTOM_POOLS

-#define MEMP_USE_CUSTOM_POOLS           0

-#endif

-

-/**

- * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from

- * interrupt context (or another context that doesn't allow waiting for a

- * semaphore).

- * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,

- * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs

- * with each loop so that mem_free can run.

- *

- * ATTENTION: As you can see from the above description, this leads to dis-/

- * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc

- * can need longer.

- *

- * If you don't want that, at least for NO_SYS=0, you can still use the following

- * functions to enqueue a deallocation call which then runs in the tcpip_thread

- * context:

- * - pbuf_free_callback(p);

- * - mem_free_callback(m);

- */

-#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT

-#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0

-#endif

-

-/*

-   ------------------------------------------------

-   ---------- Internal Memory Pool Sizes ----------

-   ------------------------------------------------

-*/

-/**

- * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).

- * If the application sends a lot of data out of ROM (or other static memory),

- * this should be set high.

- */

-#ifndef MEMP_NUM_PBUF

-#define MEMP_NUM_PBUF                   16

-#endif

-

-/**

- * MEMP_NUM_RAW_PCB: Number of raw connection PCBs

- * (requires the LWIP_RAW option)

- */

-#ifndef MEMP_NUM_RAW_PCB

-#define MEMP_NUM_RAW_PCB                4

-#endif

-

-/**

- * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One

- * per active UDP "connection".

- * (requires the LWIP_UDP option)

- */

-#ifndef MEMP_NUM_UDP_PCB

-#define MEMP_NUM_UDP_PCB                4

-#endif

-

-/**

- * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.

- * (requires the LWIP_TCP option)

- */

-#ifndef MEMP_NUM_TCP_PCB

-#define MEMP_NUM_TCP_PCB                5

-#endif

-

-/**

- * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.

- * (requires the LWIP_TCP option)

- */

-#ifndef MEMP_NUM_TCP_PCB_LISTEN

-#define MEMP_NUM_TCP_PCB_LISTEN         8

-#endif

-

-/**

- * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.

- * (requires the LWIP_TCP option)

- */

-#ifndef MEMP_NUM_TCP_SEG

-#define MEMP_NUM_TCP_SEG                16

-#endif

-

-/**

- * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for

- * reassembly (whole packets, not fragments!)

- */

-#ifndef MEMP_NUM_REASSDATA

-#define MEMP_NUM_REASSDATA              5

-#endif

-

-/**

- * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent

- * (fragments, not whole packets!).

- * This is only used with IP_FRAG_USES_STATIC_BUF==0 and

- * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs

- * where the packet is not yet sent when netif->output returns.

- */

-#ifndef MEMP_NUM_FRAG_PBUF

-#define MEMP_NUM_FRAG_PBUF              15

-#endif

-

-/**

- * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing

- * packets (pbufs) that are waiting for an ARP request (to resolve

- * their destination address) to finish.

- * (requires the ARP_QUEUEING option)

- */

-#ifndef MEMP_NUM_ARP_QUEUE

-#define MEMP_NUM_ARP_QUEUE              30

-#endif

-

-/**

- * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces

- * can be members et the same time (one per netif - allsystems group -, plus one

- * per netif membership).

- * (requires the LWIP_IGMP option)

- */

-#ifndef MEMP_NUM_IGMP_GROUP

-#define MEMP_NUM_IGMP_GROUP             8

-#endif

-

-/**

- * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.

- * (requires NO_SYS==0)

- * The default number of timeouts is calculated here for all enabled modules.

- * The formula expects settings to be either '0' or '1'.

- */

-#ifndef MEMP_NUM_SYS_TIMEOUT

-#define MEMP_NUM_SYS_TIMEOUT            (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT)

-#endif

-

-/**

- * MEMP_NUM_NETBUF: the number of struct netbufs.

- * (only needed if you use the sequential API, like api_lib.c)

- */

-#ifndef MEMP_NUM_NETBUF

-#define MEMP_NUM_NETBUF                 2

-#endif

-

-/**

- * MEMP_NUM_NETCONN: the number of struct netconns.

- * (only needed if you use the sequential API, like api_lib.c)

- */

-#ifndef MEMP_NUM_NETCONN

-#define MEMP_NUM_NETCONN                4

-#endif

-

-/**

- * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used

- * for callback/timeout API communication. 

- * (only needed if you use tcpip.c)

- */

-#ifndef MEMP_NUM_TCPIP_MSG_API

-#define MEMP_NUM_TCPIP_MSG_API          8

-#endif

-

-/**

- * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used

- * for incoming packets. 

- * (only needed if you use tcpip.c)

- */

-#ifndef MEMP_NUM_TCPIP_MSG_INPKT

-#define MEMP_NUM_TCPIP_MSG_INPKT        8

-#endif

-

-/**

- * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.

- */

-#ifndef MEMP_NUM_SNMP_NODE

-#define MEMP_NUM_SNMP_NODE              50

-#endif

-

-/**

- * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.

- * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least!

- */

-#ifndef MEMP_NUM_SNMP_ROOTNODE

-#define MEMP_NUM_SNMP_ROOTNODE          30

-#endif

-

-/**

- * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to

- * be changed normally) - 2 of these are used per request (1 for input,

- * 1 for output)

- */

-#ifndef MEMP_NUM_SNMP_VARBIND

-#define MEMP_NUM_SNMP_VARBIND           2

-#endif

-

-/**

- * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used

- * (does not have to be changed normally) - 3 of these are used per request

- * (1 for the value read and 2 for OIDs - input and output)

- */

-#ifndef MEMP_NUM_SNMP_VALUE

-#define MEMP_NUM_SNMP_VALUE             3

-#endif

-

-/**

- * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls

- * (before freeing the corresponding memory using lwip_freeaddrinfo()).

- */

-#ifndef MEMP_NUM_NETDB

-#define MEMP_NUM_NETDB                  1

-#endif

-

-/**

- * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list

- * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.

- */

-#ifndef MEMP_NUM_LOCALHOSTLIST

-#define MEMP_NUM_LOCALHOSTLIST          1

-#endif

-

-/**

- * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE

- * interfaces (only used with PPPOE_SUPPORT==1)

- */

-#ifndef MEMP_NUM_PPPOE_INTERFACES

-#define MEMP_NUM_PPPOE_INTERFACES       1

-#endif

-

-/**

- * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. 

- */

-#ifndef PBUF_POOL_SIZE

-#define PBUF_POOL_SIZE                  16

-#endif

-

-/*

-   ---------------------------------

-   ---------- ARP options ----------

-   ---------------------------------

-*/

-/**

- * LWIP_ARP==1: Enable ARP functionality.

- */

-#ifndef LWIP_ARP

-#define LWIP_ARP                        1

-#endif

-

-/**

- * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.

- */

-#ifndef ARP_TABLE_SIZE

-#define ARP_TABLE_SIZE                  10

-#endif

-

-/**

- * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address

- * resolution. By default, only the most recent packet is queued per IP address.

- * This is sufficient for most protocols and mainly reduces TCP connection

- * startup time. Set this to 1 if you know your application sends more than one

- * packet in a row to an IP address that is not in the ARP cache.

- */

-#ifndef ARP_QUEUEING

-#define ARP_QUEUEING                    0

-#endif

-

-/**

- * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be

- * updated with the source MAC and IP addresses supplied in the packet.

- * You may want to disable this if you do not trust LAN peers to have the

- * correct addresses, or as a limited approach to attempt to handle

- * spoofing. If disabled, lwIP will need to make a new ARP request if

- * the peer is not already in the ARP table, adding a little latency.

- * The peer *is* in the ARP table if it requested our address before.

- * Also notice that this slows down input processing of every IP packet!

- */

-#ifndef ETHARP_TRUST_IP_MAC

-#define ETHARP_TRUST_IP_MAC             0

-#endif

-

-/**

- * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.

- * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.

- * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.

- * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.

- * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)

- * that returns 1 to accept a packet or 0 to drop a packet.

- */

-#ifndef ETHARP_SUPPORT_VLAN

-#define ETHARP_SUPPORT_VLAN             0

-#endif

-

-/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP

- * might be disabled

- */

-#ifndef LWIP_ETHERNET

-#define LWIP_ETHERNET                   (LWIP_ARP || PPPOE_SUPPORT)

-#endif

-

-/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure

- * alignment of payload after that header. Since the header is 14 bytes long,

- * without this padding e.g. addresses in the IP header will not be aligned

- * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.

- */

-#ifndef ETH_PAD_SIZE

-#define ETH_PAD_SIZE                    0

-#endif

-

-/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table

- * entries (using etharp_add_static_entry/etharp_remove_static_entry).

- */

-#ifndef ETHARP_SUPPORT_STATIC_ENTRIES

-#define ETHARP_SUPPORT_STATIC_ENTRIES   0

-#endif

-

-

-/*

-   --------------------------------

-   ---------- IP options ----------

-   --------------------------------

-*/

-/**

- * IP_FORWARD==1: Enables the ability to forward IP packets across network

- * interfaces. If you are going to run lwIP on a device with only one network

- * interface, define this to 0.

- */

-#ifndef IP_FORWARD

-#define IP_FORWARD                      0

-#endif

-

-/**

- * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.

- *      IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.

- *      IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).

- */

-#ifndef IP_OPTIONS_ALLOWED

-#define IP_OPTIONS_ALLOWED              1

-#endif

-

-/**

- * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that

- * this option does not affect outgoing packet sizes, which can be controlled

- * via IP_FRAG.

- */

-#ifndef IP_REASSEMBLY

-#define IP_REASSEMBLY                   1

-#endif

-

-/**

- * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note

- * that this option does not affect incoming packet sizes, which can be

- * controlled via IP_REASSEMBLY.

- */

-#ifndef IP_FRAG

-#define IP_FRAG                         1

-#endif

-

-/**

- * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)

- * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived

- * in this time, the whole packet is discarded.

- */

-#ifndef IP_REASS_MAXAGE

-#define IP_REASS_MAXAGE                 3

-#endif

-

-/**

- * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.

- * Since the received pbufs are enqueued, be sure to configure

- * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive

- * packets even if the maximum amount of fragments is enqueued for reassembly!

- */

-#ifndef IP_REASS_MAX_PBUFS

-#define IP_REASS_MAX_PBUFS              10

-#endif

-

-/**

- * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP

- * fragmentation. Otherwise pbufs are allocated and reference the original

- * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1,

- * new PBUF_RAM pbufs are used for fragments).

- * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs!

- */

-#ifndef IP_FRAG_USES_STATIC_BUF

-#define IP_FRAG_USES_STATIC_BUF         0

-#endif

-

-/**

- * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer

- * (requires IP_FRAG_USES_STATIC_BUF==1)

- */

-#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)

-#define IP_FRAG_MAX_MTU                 1500

-#endif

-

-/**

- * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.

- */

-#ifndef IP_DEFAULT_TTL

-#define IP_DEFAULT_TTL                  255

-#endif

-

-/**

- * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast

- * filter per pcb on udp and raw send operations. To enable broadcast filter

- * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.

- */

-#ifndef IP_SOF_BROADCAST

-#define IP_SOF_BROADCAST                0

-#endif

-

-/**

- * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast

- * filter on recv operations.

- */

-#ifndef IP_SOF_BROADCAST_RECV

-#define IP_SOF_BROADCAST_RECV           0

-#endif

-

-/**

- * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back

- * out on the netif where it was received. This should only be used for

- * wireless networks.

- * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming

- * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!

- */

-#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF

-#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0

-#endif

-

-/**

- * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first

- * local TCP/UDP pcb (default==0). This can prevent creating predictable port

- * numbers after booting a device.

- */

-#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS

-#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0

-#endif

-

-/*

-   ----------------------------------

-   ---------- ICMP options ----------

-   ----------------------------------

-*/

-/**

- * LWIP_ICMP==1: Enable ICMP module inside the IP stack.

- * Be careful, disable that make your product non-compliant to RFC1122

- */

-#ifndef LWIP_ICMP

-#define LWIP_ICMP                       1

-#endif

-

-/**

- * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.

- */

-#ifndef ICMP_TTL

-#define ICMP_TTL                       (IP_DEFAULT_TTL)

-#endif

-

-/**

- * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)

- */

-#ifndef LWIP_BROADCAST_PING

-#define LWIP_BROADCAST_PING             0

-#endif

-

-/**

- * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)

- */

-#ifndef LWIP_MULTICAST_PING

-#define LWIP_MULTICAST_PING             0

-#endif

-

-/*

-   ---------------------------------

-   ---------- RAW options ----------

-   ---------------------------------

-*/

-/**

- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.

- */

-#ifndef LWIP_RAW

-#define LWIP_RAW                        1

-#endif

-

-/**

- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.

- */

-#ifndef RAW_TTL

-#define RAW_TTL                        (IP_DEFAULT_TTL)

-#endif

-

-/*

-   ----------------------------------

-   ---------- DHCP options ----------

-   ----------------------------------

-*/

-/**

- * LWIP_DHCP==1: Enable DHCP module.

- */

-#ifndef LWIP_DHCP

-#define LWIP_DHCP                       0

-#endif

-

-/**

- * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.

- */

-#ifndef DHCP_DOES_ARP_CHECK

-#define DHCP_DOES_ARP_CHECK             ((LWIP_DHCP) && (LWIP_ARP))

-#endif

-

-/*

-   ------------------------------------

-   ---------- AUTOIP options ----------

-   ------------------------------------

-*/

-/**

- * LWIP_AUTOIP==1: Enable AUTOIP module.

- */

-#ifndef LWIP_AUTOIP

-#define LWIP_AUTOIP                     0

-#endif

-

-/**

- * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on

- * the same interface at the same time.

- */

-#ifndef LWIP_DHCP_AUTOIP_COOP

-#define LWIP_DHCP_AUTOIP_COOP           0

-#endif

-

-/**

- * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes

- * that should be sent before falling back on AUTOIP. This can be set

- * as low as 1 to get an AutoIP address very quickly, but you should

- * be prepared to handle a changing IP address when DHCP overrides

- * AutoIP.

- */

-#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES

-#define LWIP_DHCP_AUTOIP_COOP_TRIES     9

-#endif

-

-/*

-   ----------------------------------

-   ---------- SNMP options ----------

-   ----------------------------------

-*/

-/**

- * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP

- * transport.

- */

-#ifndef LWIP_SNMP

-#define LWIP_SNMP                       0

-#endif

-

-/**

- * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will

- * allow. At least one request buffer is required.

- * Does not have to be changed unless external MIBs answer request asynchronously

- */

-#ifndef SNMP_CONCURRENT_REQUESTS

-#define SNMP_CONCURRENT_REQUESTS        1

-#endif

-

-/**

- * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap

- * destination is required

- */

-#ifndef SNMP_TRAP_DESTINATIONS

-#define SNMP_TRAP_DESTINATIONS          1

-#endif

-

-/**

- * SNMP_PRIVATE_MIB: 

- * When using a private MIB, you have to create a file 'private_mib.h' that contains

- * a 'struct mib_array_node mib_private' which contains your MIB.

- */

-#ifndef SNMP_PRIVATE_MIB

-#define SNMP_PRIVATE_MIB                0

-#endif

-

-/**

- * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not

- * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).

- * Unsafe requests are disabled by default!

- */

-#ifndef SNMP_SAFE_REQUESTS

-#define SNMP_SAFE_REQUESTS              1

-#endif

-

-/**

- * The maximum length of strings used. This affects the size of

- * MEMP_SNMP_VALUE elements.

- */

-#ifndef SNMP_MAX_OCTET_STRING_LEN

-#define SNMP_MAX_OCTET_STRING_LEN       127

-#endif

-

-/**

- * The maximum depth of the SNMP tree.

- * With private MIBs enabled, this depends on your MIB!

- * This affects the size of MEMP_SNMP_VALUE elements.

- */

-#ifndef SNMP_MAX_TREE_DEPTH

-#define SNMP_MAX_TREE_DEPTH             15

-#endif

-

-/**

- * The size of the MEMP_SNMP_VALUE elements, normally calculated from

- * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.

- */

-#ifndef SNMP_MAX_VALUE_SIZE

-#define SNMP_MAX_VALUE_SIZE             LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH))

-#endif

-

-/*

-   ----------------------------------

-   ---------- IGMP options ----------

-   ----------------------------------

-*/

-/**

- * LWIP_IGMP==1: Turn on IGMP module. 

- */

-#ifndef LWIP_IGMP

-#define LWIP_IGMP                       0

-#endif

-

-/*

-   ----------------------------------

-   ---------- DNS options -----------

-   ----------------------------------

-*/

-/**

- * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS

- * transport.

- */

-#ifndef LWIP_DNS

-#define LWIP_DNS                        0

-#endif

-

-/** DNS maximum number of entries to maintain locally. */

-#ifndef DNS_TABLE_SIZE

-#define DNS_TABLE_SIZE                  4

-#endif

-

-/** DNS maximum host name length supported in the name table. */

-#ifndef DNS_MAX_NAME_LENGTH

-#define DNS_MAX_NAME_LENGTH             256

-#endif

-

-/** The maximum of DNS servers */

-#ifndef DNS_MAX_SERVERS

-#define DNS_MAX_SERVERS                 2

-#endif

-

-/** DNS do a name checking between the query and the response. */

-#ifndef DNS_DOES_NAME_CHECK

-#define DNS_DOES_NAME_CHECK             1

-#endif

-

-/** DNS message max. size. Default value is RFC compliant. */

-#ifndef DNS_MSG_SIZE

-#define DNS_MSG_SIZE                    512

-#endif

-

-/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,

- *  you have to define

- *    #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}

- *  (an array of structs name/address, where address is an u32_t in network

- *  byte order).

- *

- *  Instead, you can also use an external function:

- *  #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)

- *  that returns the IP address or INADDR_NONE if not found.

- */

-#ifndef DNS_LOCAL_HOSTLIST

-#define DNS_LOCAL_HOSTLIST              0

-#endif /* DNS_LOCAL_HOSTLIST */

-

-/** If this is turned on, the local host-list can be dynamically changed

- *  at runtime. */

-#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC

-#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC   0

-#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */

-

-/*

-   ---------------------------------

-   ---------- UDP options ----------

-   ---------------------------------

-*/

-/**

- * LWIP_UDP==1: Turn on UDP.

- */

-#ifndef LWIP_UDP

-#define LWIP_UDP                        1

-#endif

-

-/**

- * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)

- */

-#ifndef LWIP_UDPLITE

-#define LWIP_UDPLITE                    0

-#endif

-

-/**

- * UDP_TTL: Default Time-To-Live value.

- */

-#ifndef UDP_TTL

-#define UDP_TTL                         (IP_DEFAULT_TTL)

-#endif

-

-/**

- * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.

- */

-#ifndef LWIP_NETBUF_RECVINFO

-#define LWIP_NETBUF_RECVINFO            0

-#endif

-

-/*

-   ---------------------------------

-   ---------- TCP options ----------

-   ---------------------------------

-*/

-/**

- * LWIP_TCP==1: Turn on TCP.

- */

-#ifndef LWIP_TCP

-#define LWIP_TCP                        1

-#endif

-

-/**

- * TCP_TTL: Default Time-To-Live value.

- */

-#ifndef TCP_TTL

-#define TCP_TTL                         (IP_DEFAULT_TTL)

-#endif

-

-/**

- * TCP_WND: The size of a TCP window.  This must be at least 

- * (2 * TCP_MSS) for things to work well

- */

-#ifndef TCP_WND

-#define TCP_WND                         (4 * TCP_MSS)

-#endif 

-

-/**

- * TCP_MAXRTX: Maximum number of retransmissions of data segments.

- */

-#ifndef TCP_MAXRTX

-#define TCP_MAXRTX                      12

-#endif

-

-/**

- * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.

- */

-#ifndef TCP_SYNMAXRTX

-#define TCP_SYNMAXRTX                   6

-#endif

-

-/**

- * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.

- * Define to 0 if your device is low on memory.

- */

-#ifndef TCP_QUEUE_OOSEQ

-#define TCP_QUEUE_OOSEQ                 (LWIP_TCP)

-#endif

-

-/**

- * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,

- * you might want to increase this.)

- * For the receive side, this MSS is advertised to the remote side

- * when opening a connection. For the transmit size, this MSS sets

- * an upper limit on the MSS advertised by the remote host.

- */

-#ifndef TCP_MSS

-#define TCP_MSS                         536

-#endif

-

-/**

- * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really

- * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which

- * reflects the available reassembly buffer size at the remote host) and the

- * largest size permitted by the IP layer" (RFC 1122)

- * Setting this to 1 enables code that checks TCP_MSS against the MTU of the

- * netif used for a connection and limits the MSS if it would be too big otherwise.

- */

-#ifndef TCP_CALCULATE_EFF_SEND_MSS

-#define TCP_CALCULATE_EFF_SEND_MSS      1

-#endif

-

-

-/**

- * TCP_SND_BUF: TCP sender buffer space (bytes).

- * To achieve good performance, this should be at least 2 * TCP_MSS.

- */

-#ifndef TCP_SND_BUF

-#define TCP_SND_BUF                     (2 * TCP_MSS)

-#endif

-

-/**

- * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least

- * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.

- */

-#ifndef TCP_SND_QUEUELEN

-#define TCP_SND_QUEUELEN                ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))

-#endif

-

-/**

- * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than

- * TCP_SND_BUF. It is the amount of space which must be available in the

- * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).

- */

-#ifndef TCP_SNDLOWAT

-#define TCP_SNDLOWAT                    LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)

-#endif

-

-/**

- * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less

- * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below

- * this number, select returns writable (combined with TCP_SNDLOWAT).

- */

-#ifndef TCP_SNDQUEUELOWAT

-#define TCP_SNDQUEUELOWAT               LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)

-#endif

-

-/**

- * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.

- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.

- */

-#ifndef TCP_OOSEQ_MAX_BYTES

-#define TCP_OOSEQ_MAX_BYTES             0

-#endif

-

-/**

- * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.

- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.

- */

-#ifndef TCP_OOSEQ_MAX_PBUFS

-#define TCP_OOSEQ_MAX_PBUFS             0

-#endif

-

-/**

- * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.

- */

-#ifndef TCP_LISTEN_BACKLOG

-#define TCP_LISTEN_BACKLOG              0

-#endif

-

-/**

- * The maximum allowed backlog for TCP listen netconns.

- * This backlog is used unless another is explicitly specified.

- * 0xff is the maximum (u8_t).

- */

-#ifndef TCP_DEFAULT_LISTEN_BACKLOG

-#define TCP_DEFAULT_LISTEN_BACKLOG      0xff

-#endif

-

-/**

- * TCP_OVERSIZE: The maximum number of bytes that tcp_write may

- * allocate ahead of time in an attempt to create shorter pbuf chains

- * for transmission. The meaningful range is 0 to TCP_MSS. Some

- * suggested values are:

- *

- * 0:         Disable oversized allocation. Each tcp_write() allocates a new

-              pbuf (old behaviour).

- * 1:         Allocate size-aligned pbufs with minimal excess. Use this if your

- *            scatter-gather DMA requires aligned fragments.

- * 128:       Limit the pbuf/memory overhead to 20%.

- * TCP_MSS:   Try to create unfragmented TCP packets.

- * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.

- */

-#ifndef TCP_OVERSIZE

-#define TCP_OVERSIZE                    TCP_MSS

-#endif

-

-/**

- * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.

- */

-#ifndef LWIP_TCP_TIMESTAMPS

-#define LWIP_TCP_TIMESTAMPS             0

-#endif

-

-/**

- * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an

- * explicit window update

- */

-#ifndef TCP_WND_UPDATE_THRESHOLD

-#define TCP_WND_UPDATE_THRESHOLD   (TCP_WND / 4)

-#endif

-

-/**

- * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.

- *     LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all

- *         events (accept, sent, etc) that happen in the system.

- *     LWIP_CALLBACK_API==1: The PCB callback function is called directly

- *         for the event. This is the default.

- */

-#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API)

-#define LWIP_EVENT_API                  0

-#define LWIP_CALLBACK_API               1

-#endif

-

-

-/*

-   ----------------------------------

-   ---------- Pbuf options ----------

-   ----------------------------------

-*/

-/**

- * PBUF_LINK_HLEN: the number of bytes that should be allocated for a

- * link level header. The default is 14, the standard value for

- * Ethernet.

- */

-#ifndef PBUF_LINK_HLEN

-#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)

-#endif

-

-/**

- * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is

- * designed to accomodate single full size TCP frame in one pbuf, including

- * TCP_MSS, IP header, and link header.

- */

-#ifndef PBUF_POOL_BUFSIZE

-#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)

-#endif

-

-/*

-   ------------------------------------------------

-   ---------- Network Interfaces options ----------

-   ------------------------------------------------

-*/

-/**

- * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname

- * field.

- */

-#ifndef LWIP_NETIF_HOSTNAME

-#define LWIP_NETIF_HOSTNAME             0

-#endif

-

-/**

- * LWIP_NETIF_API==1: Support netif api (in netifapi.c)

- */

-#ifndef LWIP_NETIF_API

-#define LWIP_NETIF_API                  0

-#endif

-

-/**

- * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface

- * changes its up/down status (i.e., due to DHCP IP acquistion)

- */

-#ifndef LWIP_NETIF_STATUS_CALLBACK

-#define LWIP_NETIF_STATUS_CALLBACK      0

-#endif

-

-/**

- * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface

- * whenever the link changes (i.e., link down)

- */

-#ifndef LWIP_NETIF_LINK_CALLBACK

-#define LWIP_NETIF_LINK_CALLBACK        0

-#endif

-

-/**

- * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called

- * when a netif has been removed

- */

-#ifndef LWIP_NETIF_REMOVE_CALLBACK

-#define LWIP_NETIF_REMOVE_CALLBACK      0

-#endif

-

-/**

- * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table

- * indices) in struct netif. TCP and UDP can make use of this to prevent

- * scanning the ARP table for every sent packet. While this is faster for big

- * ARP tables or many concurrent connections, it might be counterproductive

- * if you have a tiny ARP table or if there never are concurrent connections.

- */

-#ifndef LWIP_NETIF_HWADDRHINT

-#define LWIP_NETIF_HWADDRHINT           0

-#endif

-

-/**

- * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP

- * address equal to the netif IP address, looping them back up the stack.

- */

-#ifndef LWIP_NETIF_LOOPBACK

-#define LWIP_NETIF_LOOPBACK             0

-#endif

-

-/**

- * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback

- * sending for each netif (0 = disabled)

- */

-#ifndef LWIP_LOOPBACK_MAX_PBUFS

-#define LWIP_LOOPBACK_MAX_PBUFS         0

-#endif

-

-/**

- * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in

- * the system, as netifs must change how they behave depending on this setting

- * for the LWIP_NETIF_LOOPBACK option to work.

- * Setting this is needed to avoid reentering non-reentrant functions like

- * tcp_input().

- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a

- *       multithreaded environment like tcpip.c. In this case, netif->input()

- *       is called directly.

- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.

- *       The packets are put on a list and netif_poll() must be called in

- *       the main application loop.

- */

-#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING

-#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)

-#endif

-

-/**

- * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data

- * to be sent into one single pbuf. This is for compatibility with DMA-enabled

- * MACs that do not support scatter-gather.

- * Beware that this might involve CPU-memcpy before transmitting that would not

- * be needed without this flag! Use this only if you need to!

- *

- * @todo: TCP and IP-frag do not work with this, yet:

- */

-#ifndef LWIP_NETIF_TX_SINGLE_PBUF

-#define LWIP_NETIF_TX_SINGLE_PBUF             0

-#endif /* LWIP_NETIF_TX_SINGLE_PBUF */

-

-/*

-   ------------------------------------

-   ---------- LOOPIF options ----------

-   ------------------------------------

-*/

-/**

- * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c

- */

-#ifndef LWIP_HAVE_LOOPIF

-#define LWIP_HAVE_LOOPIF                0

-#endif

-

-/*

-   ------------------------------------

-   ---------- SLIPIF options ----------

-   ------------------------------------

-*/

-/**

- * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c

- */

-#ifndef LWIP_HAVE_SLIPIF

-#define LWIP_HAVE_SLIPIF                0

-#endif

-

-/*

-   ------------------------------------

-   ---------- Thread options ----------

-   ------------------------------------

-*/

-/**

- * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.

- */

-#ifndef TCPIP_THREAD_NAME

-#define TCPIP_THREAD_NAME              "tcpip_thread"

-#endif

-

-/**

- * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.

- * The stack size value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef TCPIP_THREAD_STACKSIZE

-#define TCPIP_THREAD_STACKSIZE          1024

-#endif

-

-/**

- * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.

- * The priority value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef TCPIP_THREAD_PRIO

-#define TCPIP_THREAD_PRIO               (LOWPRIO + 1)

-#endif

-

-/**

- * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages

- * The queue size value itself is platform-dependent, but is passed to

- * sys_mbox_new() when tcpip_init is called.

- */

-#ifndef TCPIP_MBOX_SIZE

-#define TCPIP_MBOX_SIZE                 MEMP_NUM_PBUF

-#endif

-

-/**

- * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.

- */

-#ifndef SLIPIF_THREAD_NAME

-#define SLIPIF_THREAD_NAME             "slipif_loop"

-#endif

-

-/**

- * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.

- * The stack size value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef SLIPIF_THREAD_STACKSIZE

-#define SLIPIF_THREAD_STACKSIZE         1024

-#endif

-

-/**

- * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.

- * The priority value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef SLIPIF_THREAD_PRIO

-#define SLIPIF_THREAD_PRIO              (LOWPRIO + 1)

-#endif

-

-/**

- * PPP_THREAD_NAME: The name assigned to the pppInputThread.

- */

-#ifndef PPP_THREAD_NAME

-#define PPP_THREAD_NAME                "pppInputThread"

-#endif

-

-/**

- * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.

- * The stack size value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef PPP_THREAD_STACKSIZE

-#define PPP_THREAD_STACKSIZE            1024

-#endif

-

-/**

- * PPP_THREAD_PRIO: The priority assigned to the pppInputThread.

- * The priority value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef PPP_THREAD_PRIO

-#define PPP_THREAD_PRIO                 (LOWPRIO + 1)

-#endif

-

-/**

- * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.

- */

-#ifndef DEFAULT_THREAD_NAME

-#define DEFAULT_THREAD_NAME            "lwIP"

-#endif

-

-/**

- * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.

- * The stack size value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef DEFAULT_THREAD_STACKSIZE

-#define DEFAULT_THREAD_STACKSIZE        1024

-#endif

-

-/**

- * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.

- * The priority value itself is platform-dependent, but is passed to

- * sys_thread_new() when the thread is created.

- */

-#ifndef DEFAULT_THREAD_PRIO

-#define DEFAULT_THREAD_PRIO             (LOWPRIO + 1)

-#endif

-

-/**

- * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a

- * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed

- * to sys_mbox_new() when the recvmbox is created.

- */

-#ifndef DEFAULT_RAW_RECVMBOX_SIZE

-#define DEFAULT_RAW_RECVMBOX_SIZE       4

-#endif

-

-/**

- * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a

- * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed

- * to sys_mbox_new() when the recvmbox is created.

- */

-#ifndef DEFAULT_UDP_RECVMBOX_SIZE

-#define DEFAULT_UDP_RECVMBOX_SIZE       4

-#endif

-

-/**

- * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a

- * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed

- * to sys_mbox_new() when the recvmbox is created.

- */

-#ifndef DEFAULT_TCP_RECVMBOX_SIZE

-#define DEFAULT_TCP_RECVMBOX_SIZE       40

-#endif

-

-/**

- * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.

- * The queue size value itself is platform-dependent, but is passed to

- * sys_mbox_new() when the acceptmbox is created.

- */

-#ifndef DEFAULT_ACCEPTMBOX_SIZE

-#define DEFAULT_ACCEPTMBOX_SIZE         4

-#endif

-

-/*

-   ----------------------------------------------

-   ---------- Sequential layer options ----------

-   ----------------------------------------------

-*/

-/**

- * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)

- * Don't use it if you're not an active lwIP project member

- */

-#ifndef LWIP_TCPIP_CORE_LOCKING

-#define LWIP_TCPIP_CORE_LOCKING         0

-#endif

-

-/**

- * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!)

- * Don't use it if you're not an active lwIP project member

- */

-#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT

-#define LWIP_TCPIP_CORE_LOCKING_INPUT   0

-#endif

-

-/**

- * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)

- */

-#ifndef LWIP_NETCONN

-#define LWIP_NETCONN                    1

-#endif

-

-/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create

- * timers running in tcpip_thread from another thread.

- */

-#ifndef LWIP_TCPIP_TIMEOUT

-#define LWIP_TCPIP_TIMEOUT              1

-#endif

-

-/*

-   ------------------------------------

-   ---------- Socket options ----------

-   ------------------------------------

-*/

-/**

- * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)

- */

-#ifndef LWIP_SOCKET

-#define LWIP_SOCKET                     1

-#endif

-

-/**

- * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.

- * (only used if you use sockets.c)

- */

-#ifndef LWIP_COMPAT_SOCKETS

-#define LWIP_COMPAT_SOCKETS             1

-#endif

-

-/**

- * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.

- * Disable this option if you use a POSIX operating system that uses the same

- * names (read, write & close). (only used if you use sockets.c)

- */

-#ifndef LWIP_POSIX_SOCKETS_IO_NAMES

-#define LWIP_POSIX_SOCKETS_IO_NAMES     1

-#endif

-

-/**

- * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT

- * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set

- * in seconds. (does not require sockets.c, and will affect tcp.c)

- */

-#ifndef LWIP_TCP_KEEPALIVE

-#define LWIP_TCP_KEEPALIVE              0

-#endif

-

-/**

- * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and

- * SO_SNDTIMEO processing.

- */

-#ifndef LWIP_SO_SNDTIMEO

-#define LWIP_SO_SNDTIMEO                0

-#endif

-

-/**

- * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and

- * SO_RCVTIMEO processing.

- */

-#ifndef LWIP_SO_RCVTIMEO

-#define LWIP_SO_RCVTIMEO                0

-#endif

-

-/**

- * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.

- */

-#ifndef LWIP_SO_RCVBUF

-#define LWIP_SO_RCVBUF                  0

-#endif

-

-/**

- * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.

- */

-#ifndef RECV_BUFSIZE_DEFAULT

-#define RECV_BUFSIZE_DEFAULT            INT_MAX

-#endif

-

-/**

- * SO_REUSE==1: Enable SO_REUSEADDR option.

- */

-#ifndef SO_REUSE

-#define SO_REUSE                        0

-#endif

-

-/**

- * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets

- * to all local matches if SO_REUSEADDR is turned on.

- * WARNING: Adds a memcpy for every packet if passing to more than one pcb!

- */

-#ifndef SO_REUSE_RXTOALL

-#define SO_REUSE_RXTOALL                0

-#endif

-

-/*

-   ----------------------------------------

-   ---------- Statistics options ----------

-   ----------------------------------------

-*/

-/**

- * LWIP_STATS==1: Enable statistics collection in lwip_stats.

- */

-#ifndef LWIP_STATS

-#define LWIP_STATS                      1

-#endif

-

-#if LWIP_STATS

-

-/**

- * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.

- */

-#ifndef LWIP_STATS_DISPLAY

-#define LWIP_STATS_DISPLAY              0

-#endif

-

-/**

- * LINK_STATS==1: Enable link stats.

- */

-#ifndef LINK_STATS

-#define LINK_STATS                      1

-#endif

-

-/**

- * ETHARP_STATS==1: Enable etharp stats.

- */

-#ifndef ETHARP_STATS

-#define ETHARP_STATS                    (LWIP_ARP)

-#endif

-

-/**

- * IP_STATS==1: Enable IP stats.

- */

-#ifndef IP_STATS

-#define IP_STATS                        1

-#endif

-

-/**

- * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is

- * on if using either frag or reass.

- */

-#ifndef IPFRAG_STATS

-#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)

-#endif

-

-/**

- * ICMP_STATS==1: Enable ICMP stats.

- */

-#ifndef ICMP_STATS

-#define ICMP_STATS                      1

-#endif

-

-/**

- * IGMP_STATS==1: Enable IGMP stats.

- */

-#ifndef IGMP_STATS

-#define IGMP_STATS                      (LWIP_IGMP)

-#endif

-

-/**

- * UDP_STATS==1: Enable UDP stats. Default is on if

- * UDP enabled, otherwise off.

- */

-#ifndef UDP_STATS

-#define UDP_STATS                       (LWIP_UDP)

-#endif

-

-/**

- * TCP_STATS==1: Enable TCP stats. Default is on if TCP

- * enabled, otherwise off.

- */

-#ifndef TCP_STATS

-#define TCP_STATS                       (LWIP_TCP)

-#endif

-

-/**

- * MEM_STATS==1: Enable mem.c stats.

- */

-#ifndef MEM_STATS

-#define MEM_STATS                       ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))

-#endif

-

-/**

- * MEMP_STATS==1: Enable memp.c pool stats.

- */

-#ifndef MEMP_STATS

-#define MEMP_STATS                      (MEMP_MEM_MALLOC == 0)

-#endif

-

-/**

- * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).

- */

-#ifndef SYS_STATS

-#define SYS_STATS                       (NO_SYS == 0)

-#endif

-

-#else

-

-#define LINK_STATS                      0

-#define IP_STATS                        0

-#define IPFRAG_STATS                    0

-#define ICMP_STATS                      0

-#define IGMP_STATS                      0

-#define UDP_STATS                       0

-#define TCP_STATS                       0

-#define MEM_STATS                       0

-#define MEMP_STATS                      0

-#define SYS_STATS                       0

-#define LWIP_STATS_DISPLAY              0

-

-#endif /* LWIP_STATS */

-

-/*

-   ---------------------------------

-   ---------- PPP options ----------

-   ---------------------------------

-*/

-/**

- * PPP_SUPPORT==1: Enable PPP.

- */

-#ifndef PPP_SUPPORT

-#define PPP_SUPPORT                     0

-#endif

-

-/**

- * PPPOE_SUPPORT==1: Enable PPP Over Ethernet

- */

-#ifndef PPPOE_SUPPORT

-#define PPPOE_SUPPORT                   0

-#endif

-

-/**

- * PPPOS_SUPPORT==1: Enable PPP Over Serial

- */

-#ifndef PPPOS_SUPPORT

-#define PPPOS_SUPPORT                   PPP_SUPPORT

-#endif

-

-#if PPP_SUPPORT

-

-/**

- * NUM_PPP: Max PPP sessions.

- */

-#ifndef NUM_PPP

-#define NUM_PPP                         1

-#endif

-

-/**

- * PAP_SUPPORT==1: Support PAP.

- */

-#ifndef PAP_SUPPORT

-#define PAP_SUPPORT                     0

-#endif

-

-/**

- * CHAP_SUPPORT==1: Support CHAP.

- */

-#ifndef CHAP_SUPPORT

-#define CHAP_SUPPORT                    0

-#endif

-

-/**

- * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!

- */

-#ifndef MSCHAP_SUPPORT

-#define MSCHAP_SUPPORT                  0

-#endif

-

-/**

- * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!

- */

-#ifndef CBCP_SUPPORT

-#define CBCP_SUPPORT                    0

-#endif

-

-/**

- * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!

- */

-#ifndef CCP_SUPPORT

-#define CCP_SUPPORT                     0

-#endif

-

-/**

- * VJ_SUPPORT==1: Support VJ header compression.

- */

-#ifndef VJ_SUPPORT

-#define VJ_SUPPORT                      0

-#endif

-

-/**

- * MD5_SUPPORT==1: Support MD5 (see also CHAP).

- */

-#ifndef MD5_SUPPORT

-#define MD5_SUPPORT                     0

-#endif

-

-/*

- * Timeouts

- */

-#ifndef FSM_DEFTIMEOUT

-#define FSM_DEFTIMEOUT                  6       /* Timeout time in seconds */

-#endif

-

-#ifndef FSM_DEFMAXTERMREQS

-#define FSM_DEFMAXTERMREQS              2       /* Maximum Terminate-Request transmissions */

-#endif

-

-#ifndef FSM_DEFMAXCONFREQS

-#define FSM_DEFMAXCONFREQS              10      /* Maximum Configure-Request transmissions */

-#endif

-

-#ifndef FSM_DEFMAXNAKLOOPS

-#define FSM_DEFMAXNAKLOOPS              5       /* Maximum number of nak loops */

-#endif

-

-#ifndef UPAP_DEFTIMEOUT

-#define UPAP_DEFTIMEOUT                 6       /* Timeout (seconds) for retransmitting req */

-#endif

-

-#ifndef UPAP_DEFREQTIME

-#define UPAP_DEFREQTIME                 30      /* Time to wait for auth-req from peer */

-#endif

-

-#ifndef CHAP_DEFTIMEOUT

-#define CHAP_DEFTIMEOUT                 6       /* Timeout time in seconds */

-#endif

-

-#ifndef CHAP_DEFTRANSMITS

-#define CHAP_DEFTRANSMITS               10      /* max # times to send challenge */

-#endif

-

-/* Interval in seconds between keepalive echo requests, 0 to disable. */

-#ifndef LCP_ECHOINTERVAL

-#define LCP_ECHOINTERVAL                0

-#endif

-

-/* Number of unanswered echo requests before failure. */

-#ifndef LCP_MAXECHOFAILS

-#define LCP_MAXECHOFAILS                3

-#endif

-

-/* Max Xmit idle time (in jiffies) before resend flag char. */

-#ifndef PPP_MAXIDLEFLAG

-#define PPP_MAXIDLEFLAG                 100

-#endif

-

-/*

- * Packet sizes

- *

- * Note - lcp shouldn't be allowed to negotiate stuff outside these

- *    limits.  See lcp.h in the pppd directory.

- * (XXX - these constants should simply be shared by lcp.c instead

- *    of living in lcp.h)

- */

-#define PPP_MTU                         1500     /* Default MTU (size of Info field) */

-#ifndef PPP_MAXMTU

-/* #define PPP_MAXMTU  65535 - (PPP_HDRLEN + PPP_FCSLEN) */

-#define PPP_MAXMTU                      1500 /* Largest MTU we allow */

-#endif

-#define PPP_MINMTU                      64

-#define PPP_MRU                         1500     /* default MRU = max length of info field */

-#define PPP_MAXMRU                      1500     /* Largest MRU we allow */

-#ifndef PPP_DEFMRU

-#define PPP_DEFMRU                      296             /* Try for this */

-#endif

-#define PPP_MINMRU                      128             /* No MRUs below this */

-

-#ifndef MAXNAMELEN

-#define MAXNAMELEN                      256     /* max length of hostname or name for auth */

-#endif

-#ifndef MAXSECRETLEN

-#define MAXSECRETLEN                    256     /* max length of password or secret */

-#endif

-

-#endif /* PPP_SUPPORT */

-

-/*

-   --------------------------------------

-   ---------- Checksum options ----------

-   --------------------------------------

-*/

-/**

- * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.

- */

-#ifndef CHECKSUM_GEN_IP

-#define CHECKSUM_GEN_IP                 1

-#endif

- 

-/**

- * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.

- */

-#ifndef CHECKSUM_GEN_UDP

-#define CHECKSUM_GEN_UDP                1

-#endif

- 

-/**

- * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.

- */

-#ifndef CHECKSUM_GEN_TCP

-#define CHECKSUM_GEN_TCP                1

-#endif

-

-/**

- * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.

- */

-#ifndef CHECKSUM_GEN_ICMP

-#define CHECKSUM_GEN_ICMP               1

-#endif

- 

-/**

- * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.

- */

-#ifndef CHECKSUM_CHECK_IP

-#define CHECKSUM_CHECK_IP               1

-#endif

- 

-/**

- * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.

- */

-#ifndef CHECKSUM_CHECK_UDP

-#define CHECKSUM_CHECK_UDP              1

-#endif

-

-/**

- * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.

- */

-#ifndef CHECKSUM_CHECK_TCP

-#define CHECKSUM_CHECK_TCP              1

-#endif

-

-/**

- * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from

- * application buffers to pbufs.

- */

-#ifndef LWIP_CHECKSUM_ON_COPY

-#define LWIP_CHECKSUM_ON_COPY           0

-#endif

-

-/*

-   ---------------------------------------

-   ---------- Hook options ---------------

-   ---------------------------------------

-*/

-

-/* Hooks are undefined by default, define them to a function if you need them. */

-

-/**

- * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):

- * - called from ip_input() (IPv4)

- * - pbuf: received struct pbuf passed to ip_input()

- * - input_netif: struct netif on which the packet has been received

- * Return values:

- * - 0: Hook has not consumed the packet, packet is processed as normal

- * - != 0: Hook has consumed the packet.

- * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook

- * (i.e. free it when done).

- */

-

-/**

- * LWIP_HOOK_IP4_ROUTE(dest):

- * - called from ip_route() (IPv4)

- * - dest: destination IPv4 address

- * Returns the destination netif or NULL if no destination netif is found. In

- * that case, ip_route() continues as normal.

- */

-

-/*

-   ---------------------------------------

-   ---------- Debugging options ----------

-   ---------------------------------------

-*/

-/**

- * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is

- * compared against this value. If it is smaller, then debugging

- * messages are written.

- */

-#ifndef LWIP_DBG_MIN_LEVEL

-#define LWIP_DBG_MIN_LEVEL              LWIP_DBG_LEVEL_ALL

-#endif

-

-/**

- * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable

- * debug messages of certain types.

- */

-#ifndef LWIP_DBG_TYPES_ON

-#define LWIP_DBG_TYPES_ON               LWIP_DBG_ON

-#endif

-

-/**

- * ETHARP_DEBUG: Enable debugging in etharp.c.

- */

-#ifndef ETHARP_DEBUG

-#define ETHARP_DEBUG                    LWIP_DBG_OFF

-#endif

-

-/**

- * NETIF_DEBUG: Enable debugging in netif.c.

- */

-#ifndef NETIF_DEBUG

-#define NETIF_DEBUG                     LWIP_DBG_OFF

-#endif

-

-/**

- * PBUF_DEBUG: Enable debugging in pbuf.c.

- */

-#ifndef PBUF_DEBUG

-#define PBUF_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * API_LIB_DEBUG: Enable debugging in api_lib.c.

- */

-#ifndef API_LIB_DEBUG

-#define API_LIB_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * API_MSG_DEBUG: Enable debugging in api_msg.c.

- */

-#ifndef API_MSG_DEBUG

-#define API_MSG_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * SOCKETS_DEBUG: Enable debugging in sockets.c.

- */

-#ifndef SOCKETS_DEBUG

-#define SOCKETS_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * ICMP_DEBUG: Enable debugging in icmp.c.

- */

-#ifndef ICMP_DEBUG

-#define ICMP_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * IGMP_DEBUG: Enable debugging in igmp.c.

- */

-#ifndef IGMP_DEBUG

-#define IGMP_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * INET_DEBUG: Enable debugging in inet.c.

- */

-#ifndef INET_DEBUG

-#define INET_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * IP_DEBUG: Enable debugging for IP.

- */

-#ifndef IP_DEBUG

-#define IP_DEBUG                        LWIP_DBG_OFF

-#endif

-

-/**

- * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.

- */

-#ifndef IP_REASS_DEBUG

-#define IP_REASS_DEBUG                  LWIP_DBG_OFF

-#endif

-

-/**

- * RAW_DEBUG: Enable debugging in raw.c.

- */

-#ifndef RAW_DEBUG

-#define RAW_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * MEM_DEBUG: Enable debugging in mem.c.

- */

-#ifndef MEM_DEBUG

-#define MEM_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * MEMP_DEBUG: Enable debugging in memp.c.

- */

-#ifndef MEMP_DEBUG

-#define MEMP_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * SYS_DEBUG: Enable debugging in sys.c.

- */

-#ifndef SYS_DEBUG

-#define SYS_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * TIMERS_DEBUG: Enable debugging in timers.c.

- */

-#ifndef TIMERS_DEBUG

-#define TIMERS_DEBUG                    LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_DEBUG: Enable debugging for TCP.

- */

-#ifndef TCP_DEBUG

-#define TCP_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.

- */

-#ifndef TCP_INPUT_DEBUG

-#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.

- */

-#ifndef TCP_FR_DEBUG

-#define TCP_FR_DEBUG                    LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit

- * timeout.

- */

-#ifndef TCP_RTO_DEBUG

-#define TCP_RTO_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.

- */

-#ifndef TCP_CWND_DEBUG

-#define TCP_CWND_DEBUG                  LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.

- */

-#ifndef TCP_WND_DEBUG

-#define TCP_WND_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.

- */

-#ifndef TCP_OUTPUT_DEBUG

-#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.

- */

-#ifndef TCP_RST_DEBUG

-#define TCP_RST_DEBUG                   LWIP_DBG_OFF

-#endif

-

-/**

- * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.

- */

-#ifndef TCP_QLEN_DEBUG

-#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF

-#endif

-

-/**

- * UDP_DEBUG: Enable debugging in UDP.

- */

-#ifndef UDP_DEBUG

-#define UDP_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * TCPIP_DEBUG: Enable debugging in tcpip.c.

- */

-#ifndef TCPIP_DEBUG

-#define TCPIP_DEBUG                     LWIP_DBG_OFF

-#endif

-

-/**

- * PPP_DEBUG: Enable debugging for PPP.

- */

-#ifndef PPP_DEBUG

-#define PPP_DEBUG                       LWIP_DBG_OFF

-#endif

-

-/**

- * SLIP_DEBUG: Enable debugging in slipif.c.

- */

-#ifndef SLIP_DEBUG

-#define SLIP_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * DHCP_DEBUG: Enable debugging in dhcp.c.

- */

-#ifndef DHCP_DEBUG

-#define DHCP_DEBUG                      LWIP_DBG_OFF

-#endif

-

-/**

- * AUTOIP_DEBUG: Enable debugging in autoip.c.

- */

-#ifndef AUTOIP_DEBUG

-#define AUTOIP_DEBUG                    LWIP_DBG_OFF

-#endif

-

-/**

- * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.

- */

-#ifndef SNMP_MSG_DEBUG

-#define SNMP_MSG_DEBUG                  LWIP_DBG_OFF

-#endif

-

-/**

- * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.

- */

-#ifndef SNMP_MIB_DEBUG

-#define SNMP_MIB_DEBUG                  LWIP_DBG_OFF

-#endif

-

-/**

- * DNS_DEBUG: Enable debugging for DNS.

- */

-#ifndef DNS_DEBUG

-#define DNS_DEBUG                       LWIP_DBG_OFF

-#endif

-

-#endif /* __LWIPOPT_H__ */