git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6916 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 80 deletions

diff --git a/boards/RENESAS_RPBRX62N/board.c b/boards/RENESAS_RPBRX62N/board.c
deleted file mode 100644
index df66b4d26..000000000
--- a/boards/RENESAS_RPBRX62N/board.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "ch.h"

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config = {

- {VAL_PORT0DATA, VAL_PORT0DIR, VAL_PORT0ICR, VAL_PORT0ODR, 0},

- {VAL_PORT1DATA, VAL_PORT1DIR, VAL_PORT1ICR, VAL_PORT1ODR, 0},

- {VAL_PORT2DATA, VAL_PORT2DIR, VAL_PORT2ICR, VAL_PORT2ODR, 0},

- {VAL_PORT3DATA, VAL_PORT3DIR, VAL_PORT3ICR, VAL_PORT3ODR, 0},

- {VAL_PORT4DATA, VAL_PORT4DIR, VAL_PORT4ICR, 0           , 0},

- {VAL_PORT5DATA, VAL_PORT5DIR, VAL_PORT5ICR, 0           , 0},

- {VAL_PORTADATA, VAL_PORTADIR, VAL_PORTAICR, 0           , VAL_PORTAPCR},

- {VAL_PORTBDATA, VAL_PORTBDIR, VAL_PORTBICR, 0           , VAL_PORTBPCR},

- {VAL_PORTCDATA, VAL_PORTCDIR, VAL_PORTCICR, VAL_PORTCODR, VAL_PORTCPCR},

- {VAL_PORTDDATA, VAL_PORTDDIR, VAL_PORTDICR, 0           , VAL_PORTDPCR},

- {VAL_PORTEDATA, VAL_PORTEDIR, VAL_PORTEICR, 0           , VAL_PORTEPCR},

-};

-#endif

-

-/**

- * @brief   CMT3 interrupt handler.

- */

-CH_IRQ_HANDLER(Excep_CMTU1_CMT3) {

-

-  CH_IRQ_PROLOGUE();

-

-  chSysLockFromIsr();

-  chSysTimerHandlerI();

-  chSysUnlockFromIsr();

-

-  CH_IRQ_EPILOGUE();

-}

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-void __early_init(void) {

-

-  rx62n_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-void boardInit(void) {

-

-  /* Setup tick timer */

-  MSTP(CMT3) = 0;             /* Enable CMT3 timer (cancel module stop state) */

-  CMT.CMSTR1.BIT.STR3 = 0;    /* Stop timer */

-  CMT3.CMCR.BIT.CKS = 2;      /* PCLK/128 */

-  CMT3.CMCNT = 0;

-  CMT3.CMCOR = RX62N_PERCLK / 128 / CH_FREQUENCY;

-  CMT3.CMCR.BIT.CMIE = 1;     /* Enable compare match interrupts */

-  IEN(CMT3,CMI3) = 1;         /* Set Interrupt Enable Register */

-  IPR(CMT3,CMI3) = 8;         /* Setup interrupt priority */

-  CMT.CMSTR1.BIT.STR3 = 1;    /* Start timer */

-}