Documentation related fixes.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@2222 35acf78f-673a-0410-8e92-d51de3d6d3f4

2 files changed, 18 insertions, 14 deletions

diff --git a/os/ports/GCC/AVR/port.dox b/os/ports/GCC/AVR/port.dox
index d5bf64f99..220f3d20a 100644
--- a/os/ports/GCC/AVR/port.dox
+++ b/os/ports/GCC/AVR/port.dox
@@ -54,15 +54,14 @@
 

 /**

  * @defgroup AVR_CONF Configuration Options

- * @brief AVR Configuration Options.

- * @details The AVR port allows some architecture-specific configurations

- * settings that can be overridden by redefining them in @p chconf.h.

- * Usually there is no need to change the default values.

+ * @details AVR Configuration Options. The AVR port allows some

+ * architecture-specific configurations settings that can be overridden

+ * by redefining them in @p chconf.h. Usually there is no need to change

+ * the default values.

  * - @p INT_REQUIRED_STACK, this value represent the amount of stack space

  *   used by the interrupt handlers.<br>

  *   The default for this value is @p 32, this space is allocated for each

- *   thread so be careful in order to not waste precious RAM space.<br>

- *   The default value is set into <b>./os/ports/GCC/AVR/chcore.h</b>.

+ *   thread so be careful in order to not waste precious RAM space.

  * - @p IDLE_THREAD_STACK_SIZE, stack area size to be assigned to the IDLE

  *   thread. Usually there is no need to change this value unless inserting

  *   code in the IDLE thread hook macro.

@@ -70,12 +69,18 @@
  * @ingroup AVR

  */

 

+ /**

+ * @defgroup AVR_STARTUP Startup Support

+ * @details ChibiOS/RT doed not provide startup files for the AVR, there

+ * are no special startup requirement so the normal toolchain-provided

+ * startup files can be used.

+ *

+ * @ingroup AVR

+ */

+

 /**

  * @defgroup AVR_CORE AVR Core Implementation

- * @brief AVR specific port code, structures and macros.

+ * @details AVR specific port code, structures and macros.

  *

  * @ingroup AVR

- * @file AVR/chtypes.h Port types.

- * @file AVR/chcore.h Port related structures and macros.

- * @file AVR/chcore.c Port related code.

  */

diff --git a/os/ports/GCC/MSP430/port.dox b/os/ports/GCC/MSP430/port.dox
index 3f9609cf9..66f2562c8 100644
--- a/os/ports/GCC/MSP430/port.dox
+++ b/os/ports/GCC/MSP430/port.dox
@@ -48,8 +48,8 @@
  * .

  * @section MSP430_NOTES The MSP430 port notes

  * - The MSP430 does not have a dedicated interrupt stack, make sure to reserve

- *     enough stack space for interrupts in each thread stack. This can be done

- *     by modifying the @p INT_REQUIRED_STACK configuration options.

+ *   enough stack space for interrupts in each thread stack. This can be done

+ *   by modifying the @p INT_REQUIRED_STACK configuration options.

  * - The state of the hardware multiplier is not saved in the thread context,

  *   make sure to use it in <b>Suspended</b> state (interrupts masked).

  * - The port code does not define the switch to a low power mode for the

@@ -69,8 +69,7 @@
  * - @p INT_REQUIRED_STACK, this value represent the amount of stack space

  *   used by the interrupt handlers.<br>

  *   The default for this value is @p 32, this space is allocated for each

- *   thread so be careful in order to not waste precious RAM space.<br>

- *   The default value is set into <b>./os/ports/GCC/MSP430/chcore.h</b>.

+ *   thread so be careful in order to not waste precious RAM space.

  * - @p IDLE_THREAD_STACK_SIZE, stack area size to be assigned to the IDLE

  *   thread. Usually there is no need to change this value unless inserting

  *   code in the IDLE thread hook macro.