I2C. Old driver moved to I2Cv1 dir.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/i2c_dev@3547 35acf78f-673a-0410-8e92-d51de3d6d3f4

2 files changed, 1418 insertions, 0 deletions

diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c
new file mode 100644
index 000000000..93b4c4061
--- /dev/null
+++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c
@@ -0,0 +1,1100 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+                 2011 Giovanni Di Sirio.
+
+    This file is part of ChibiOS/RT.
+
+    ChibiOS/RT is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS/RT is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+#include "i2c_lld.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Datasheet notes.                                                          */
+/*===========================================================================*/
+/**
+ * From RM0008.pdf
+ *
+ * Note:
+ * When the STOP, START or PEC bit is set, the software must NOT perform
+ * any write access to I2C_CR1 before this bit is cleared by hardware.
+ * Otherwise there is a  risk of setting a second STOP, START or PEC request.
+ */
+
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+#define I2C_STOP_GPT_TIMEOUT  50     /* waiting timer value */
+#define I2C_START_GPT_TIMEOUT 50     /* waiting timer value */
+#define I2C_POLLING_TIMEOUT   0xFFFF
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables.                                                   */
+/*===========================================================================*/
+
+/* Debugging variables */
+#if CH_DBG_ENABLE_ASSERTS
+static volatile uint16_t dbgSR1 = 0;
+static volatile uint16_t dbgSR2 = 0;
+static volatile uint16_t dbgCR1 = 0;
+static volatile uint16_t dbgCR2 = 0;
+#endif /* CH_DBG_ENABLE_ASSERTS */
+
+/* defines for convenience purpose */
+#if I2C_SUPPORTS_CALLBACKS
+#define txBuffp (i2cp->txbuff_p)
+#define rxBuffp (i2cp->rxbuff_p)
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+#if I2C_SUPPORTS_CALLBACKS
+#if (!(STM32_I2C_I2C1_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C1
+/* I2C1 GPT callback. */
+static void i2c1gptcb(GPTDriver *gptp) {
+  (void)gptp;
+  I2CDriver *i2cp = &I2CD1;
+
+  chSysLockFromIsr();
+  i2cp->flags &= ~I2C_FLG_TIMER_ARMED;
+
+  switch(i2cp->id_state){
+  case I2C_ACTIVE_TRANSMIT:
+    i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes);
+  break;
+
+  case I2C_ACTIVE_RECEIVE:
+    i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes);
+  break;
+
+  case I2C_ACTIVE_TRANSCEIVE:
+    i2c_lld_master_transceive(i2cp);
+  break;
+
+  default:
+  break;
+  }
+  chSysUnlockFromIsr();
+}
+/* I2C1 GPT configuration. */
+static const GPTConfig i2c1gptcfg = {
+  1000000,  /* 1MHz timer clock.*/
+  i2c1gptcb    /* Timer callback.*/
+};
+#endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */
+
+#if (!(STM32_I2C_I2C2_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C2
+/* I2C2 GPT callback. */
+static void i2c2gptcb(GPTDriver *gptp) {
+  (void)gptp;
+  I2CDriver *i2cp = &I2CD2;
+
+  chSysLockFromIsr();
+  i2cp->flags &= ~I2C_FLG_TIMER_ARMED;
+
+  switch(i2cp->id_state){
+  case I2C_ACTIVE_TRANSMIT:
+    i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes);
+  break;
+
+  case I2C_ACTIVE_RECEIVE:
+    i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes);
+  break;
+
+  case I2C_ACTIVE_TRANSCEIVE:
+    i2c_lld_master_transceive(i2cp);
+  break;
+
+  default:
+  break;
+  }
+  chSysUnlockFromIsr();
+}
+/* I2C2 GPT configuration. */
+static const GPTConfig i2c2gptcfg = {
+  1000000,  /* 1MHz timer clock.*/
+  i2c2gptcb    /* Timer callback.*/
+};
+#endif /* STM32_I2C_I2C2_USE_POLLING_WAIT */
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+/**
+ * @brief   Function for I2C debugging purpose.
+ * @note    Internal use only.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#if CH_DBG_ENABLE_ASSERTS
+void _i2c_unhandled_case(I2CDriver *i2cp){
+  dbgCR1 = i2cp->id_i2c->CR1;
+  dbgCR2 = i2cp->id_i2c->CR2;
+  chDbgAssert((dbgSR1 + dbgSR2) == 0,
+        "i2c_serve_event_interrupt(), #1",
+        "unhandled case");
+}
+#else
+#define _i2c_unhandled_case(i2cp)
+#endif /* CH_DBG_ENABLE_ASSERTS */
+
+#if I2C_SUPPORTS_CALLBACKS
+/**
+ * @brief   Return the last event value from I2C status registers.
+ * @note    Internal use only.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static uint32_t i2c_get_event(I2CDriver *i2cp){
+  uint16_t regSR1 = i2cp->id_i2c->SR1;
+  uint16_t regSR2 = i2cp->id_i2c->SR2;
+  #if CH_DBG_ENABLE_ASSERTS
+    dbgSR1 = regSR1;
+    dbgSR2 = regSR2;
+  #endif /* CH_DBG_ENABLE_ASSERTS */
+
+  return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
+}
+
+/**
+ * @brief   Handle the flags/interrupts.
+ * @note    Internal use only.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void _i2c_ev6_master_rec_mode_selected(I2CDriver *i2cp){
+  I2C_TypeDef *dp = i2cp->id_i2c;
+
+  switch(i2cp->flags & EV6_SUBEV_MASK) {
+
+  case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: /* only an single byte to receive */
+    dp->CR1 &= (uint16_t)~I2C_CR1_ACK;          /* Clear ACK */
+    dp->CR1 |= I2C_CR1_STOP;                    /* Program the STOP */
+    break;
+
+  case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: /* only two bytes to receive */
+    dp->CR1 &= (uint16_t)~I2C_CR1_ACK;          /* Clear ACK */
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;      /* Disable the ITBUF in order to have only the BTF interrupt */
+    break;
+
+  default: /* more than 2 bytes to receive */
+    break;
+  }
+}
+
+/**
+ * @brief   Handle cases of 2 or 3 bytes receiving.
+ * @note    Internal use only.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void _i2c_ev7_master_rec_byte_qued(I2CDriver *i2cp){
+  I2C_TypeDef *dp = i2cp->id_i2c;
+
+  switch(i2cp->flags & EV7_SUBEV_MASK) {
+
+  case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:
+    /* Only for case of three bytes to be received.
+     * DataN-2 and DataN-1 already received. */
+    dp->CR1 &= (uint16_t)~I2C_CR1_ACK;  /* Clear ACK */
+    *rxBuffp = dp->DR;                  /* Read the DataN-2. This clear the RXE & BFT flags and launch the DataN exception in the shift register (ending the SCL stretch) */
+    rxBuffp++;
+    chSysLockFromIsr();
+    dp->CR1 |= I2C_CR1_STOP;            /* Program the STOP */
+    *rxBuffp = dp->DR;                  /* Read the DataN-1 */
+    chSysUnlockFromIsr();
+    rxBuffp++;
+    i2cp->rxbytes -= 2;                 /* Decrement the number of readed bytes */
+    i2cp->flags = 0;
+    dp->CR2 |= I2C_CR2_ITBUFEN;         /* ready for read DataN. Enable interrupt for next (and last) RxNE event*/
+    break;
+
+  case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS:
+    /* only for case of two bytes to be received
+     * DataN-1 and DataN are received */
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+    chSysLockFromIsr();
+    dp->CR1 |= I2C_CR1_STOP;                    /* Program the STOP */
+    *rxBuffp = dp->DR;                          /* Read the DataN-1*/
+    rxBuffp++;
+    *rxBuffp = dp->DR;                          /* Read the DataN*/
+    chSysUnlockFromIsr();
+    i2cp->rxbytes = 0;
+    i2cp->flags = 0;
+    _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */
+    break;
+
+  case I2C_FLG_MASTER_RECEIVER:
+    /* Some times in hi load scenarions it is possible to "miss" interrupt
+     * because STM32 I2C has OR'ed interrupt sources. This case handle that
+     * scenario. */
+    if (i2cp->rxbytes > 3){
+      *rxBuffp = dp->DR;
+      rxBuffp++;
+      (i2cp->rxbytes)--;
+    }
+    else{
+      _i2c_unhandled_case(i2cp);
+    }
+    break;
+
+  default:
+    _i2c_unhandled_case(i2cp);
+    break;
+  }
+}
+
+/**
+ * @brief   Main I2C interrupt handler.
+ * @note    Internal use only.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
+  I2C_TypeDef *dp = i2cp->id_i2c;
+
+  switch(i2c_get_event(i2cp)) {
+
+  case I2C_EV5_MASTER_MODE_SELECT:
+    i2cp->flags &= ~I2C_FLG_HEADER_SENT;
+    dp->DR = i2cp->slave_addr1;
+    break;
+
+  case I2C_EV9_MASTER_ADDR_10BIT:
+    if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) {
+      i2cp->slave_addr1 |= 0x01;
+      i2cp->flags |= I2C_FLG_HEADER_SENT;
+    }
+    dp->DR = i2cp->slave_addr2;
+    break;
+
+  /**************************************************************************
+   * Master Transmitter part
+   */
+  case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+    if(i2cp->flags & I2C_FLG_HEADER_SENT){
+      dp->CR1 |= I2C_CR1_START;             /* re-send the start in 10-Bit address mode */
+      break;
+    }
+    txBuffp = (uint8_t*)i2cp->txbuf;        /* Initialize the transmit buffer pointer */
+    i2cp->txbytes--;
+    if(i2cp->txbytes == 0) {                /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */
+      dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+    }
+    dp->DR = *txBuffp;                      /* EV8_1 write the first data */
+    txBuffp++;
+    break;
+
+  case I2C_EV8_MASTER_BYTE_TRANSMITTING:
+    if(i2cp->txbytes > 0) {
+      i2cp->txbytes--;
+      if(i2cp->txbytes == 0) {              /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */
+        dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+      }
+      dp->DR = *txBuffp;
+      txBuffp++;
+    }
+    break;
+
+  case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;        /* Disable ITEVT In order to not have again a BTF IT */
+    if (i2cp->rxbytes == 0){                      /* if nothing to read then generate stop */
+      dp->CR1 |= I2C_CR1_STOP;
+      _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */
+    }
+    else{                                         /* start reading operation */
+      i2cp->id_i2c->CR1 |= I2C_CR1_START;         /* send start bit */
+      i2c_lld_master_transceive(i2cp);
+    }
+    break;
+
+  /**************************************************************************
+   * Master Receiver part
+   */
+  case I2C_EV6_MASTER_REC_MODE_SELECTED:
+    _i2c_ev6_master_rec_mode_selected(i2cp);
+    rxBuffp = i2cp->rxbuf;                        /* Initialize receive buffer pointer */
+    break;
+
+  case I2C_EV7_MASTER_REC_BYTE_RECEIVED:
+    if(i2cp->rxbytes > 3) {
+      *rxBuffp = dp->DR;                          /* Read the data register */
+      rxBuffp++;
+      i2cp->rxbytes--;
+      if(i2cp->rxbytes == 3){                     /* Disable the ITBUF in order to have only the BTF interrupt */
+        dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+        i2cp->flags |= I2C_FLG_3BTR;
+      }
+    }
+    else if (i2cp->rxbytes == 3){                 /* Disable the ITBUF in order to have only the BTF interrupt */
+      dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+      i2cp->flags |= I2C_FLG_3BTR;
+    }
+    break;
+
+  case I2C_EV7_MASTER_REC_BYTE_QUEUED:
+    _i2c_ev7_master_rec_byte_qued(i2cp);
+    break;
+
+  default:                                        /* only 1 byte must to be read to complete trasfer. Stop already sent to bus. */
+    chDbgAssert((i2cp->rxbytes) == 1,
+          "i2c_serve_event_interrupt(), #1",
+          "more than 1 byte to be received");
+    *rxBuffp = dp->DR;                            /* Read the data register */
+    i2cp->rxbytes = 0;
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;        /* disable interrupts */
+    dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+    _i2c_isr_code(i2cp, i2cp->id_slave_config);   /* Portable I2C ISR code defined in the high level driver.*/
+    break;
+  }
+}
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
+  i2cflags_t flags;
+  I2C_TypeDef *reg;
+
+  reg = i2cp->id_i2c;
+  flags = I2CD_NO_ERROR;
+
+  if(reg->SR1 & I2C_SR1_BERR) {                /* Bus error */
+    reg->SR1 &= ~I2C_SR1_BERR;
+    flags |= I2CD_BUS_ERROR;
+  }
+  if(reg->SR1 & I2C_SR1_ARLO) {                /* Arbitration lost */
+    reg->SR1 &= ~I2C_SR1_ARLO;
+    flags |= I2CD_ARBITRATION_LOST;
+  }
+  if(reg->SR1 & I2C_SR1_AF) {                  /* Acknowledge fail */
+    reg->SR1 &= ~I2C_SR1_AF;
+    reg->CR1 |= I2C_CR1_STOP;                  /* setting stop bit */
+    while(i2cp->id_i2c->CR1 & I2C_CR1_STOP)
+      ;
+    flags |= I2CD_ACK_FAILURE;
+  }
+  if(reg->SR1 & I2C_SR1_OVR) {                 /* Overrun */
+    reg->SR1 &= ~I2C_SR1_OVR;
+    flags |= I2CD_OVERRUN;
+  }
+  if(reg->SR1 & I2C_SR1_PECERR) {              /* PEC error */
+    reg->SR1 &= ~I2C_SR1_PECERR;
+    flags |= I2CD_PEC_ERROR;
+  }
+  if(reg->SR1 & I2C_SR1_TIMEOUT) {             /* SMBus Timeout */
+    reg->SR1 &= ~I2C_SR1_TIMEOUT;
+    flags |= I2CD_TIMEOUT;
+  }
+  if(reg->SR1 & I2C_SR1_SMBALERT) {            /* SMBus alert */
+    reg->SR1 &= ~I2C_SR1_SMBALERT;
+    flags |= I2CD_SMB_ALERT;
+  }
+
+  if(flags != I2CD_NO_ERROR) {                /* send communication end signal */
+    chSysLockFromIsr();
+    i2cAddFlagsI(i2cp, flags);
+    chSysUnlockFromIsr();
+  #if I2C_SUPPORTS_CALLBACKS
+    _i2c_isr_err_code(i2cp, i2cp->id_slave_config);
+  #endif /* I2C_SUPPORTS_CALLBACKS */
+  }
+}
+
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ */
+#if I2C_SUPPORTS_CALLBACKS
+CH_IRQ_HANDLER(VectorBC) {
+
+  CH_IRQ_PROLOGUE();
+  i2c_serve_event_interrupt(&I2CD1);
+  CH_IRQ_EPILOGUE();
+}
+#endif /* I2C_SUPPORTS_CALLBACKS */
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC0) {
+
+  CH_IRQ_PROLOGUE();
+  i2c_serve_error_interrupt(&I2CD1);
+  CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ */
+#if I2C_SUPPORTS_CALLBACKS
+CH_IRQ_HANDLER(VectorC4) {
+
+  CH_IRQ_PROLOGUE();
+  i2c_serve_event_interrupt(&I2CD2);
+  CH_IRQ_EPILOGUE();
+}
+#endif /* I2C_SUPPORTS_CALLBACKS */
+/**
+ * @brief I2C2 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC8) {
+
+  CH_IRQ_PROLOGUE();
+  i2c_serve_error_interrupt(&I2CD2);
+  CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C2 */
+
+/**
+ * @brief Low level I2C driver initialization.
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+  i2cObjectInit(&I2CD1);
+  I2CD1.id_i2c      = I2C1;
+
+#if I2C_SUPPORTS_CALLBACKS
+#if !(STM32_I2C_I2C1_USE_POLLING_WAIT)
+  I2CD1.timer       = &(STM32_I2C_I2C1_USE_GPT_TIM);
+  I2CD1.timer_cfg   = &i2c1gptcfg;
+#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+#endif /* STM32_I2C_USE_I2C */
+
+#if STM32_I2C_USE_I2C2
+  i2cObjectInit(&I2CD2);
+  I2CD2.id_i2c      = I2C2;
+
+#if I2C_SUPPORTS_CALLBACKS
+#if !(STM32_I2C_I2C2_USE_POLLING_WAIT)
+  I2CD2.timer       = &(STM32_I2C_I2C2_USE_GPT_TIM);
+  I2CD2.timer_cfg   = &i2c2gptcfg;
+#endif /* !(STM32_I2C_I2C2_USE_POLLING_WAIT) */
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+#endif /* STM32_I2C_USE_I2C2 */
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+  if (i2cp->id_state == I2C_STOP) {         /* If in stopped state then enables the I2C clock.*/
+#if STM32_I2C_USE_I2C1
+    if (&I2CD1 == i2cp) {
+#if I2C_SUPPORTS_CALLBACKS
+      NVICEnableVector(I2C1_EV_IRQn,
+          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#endif /* I2C_SUPPORTS_CALLBACKS */
+      NVICEnableVector(I2C1_ER_IRQn,
+          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+      rccEnableI2C1(FALSE);
+    }
+#endif
+#if STM32_I2C_USE_I2C2
+    if (&I2CD2 == i2cp) {
+#if I2C_SUPPORTS_CALLBACKS
+      NVICEnableVector(I2C2_EV_IRQn,
+          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#endif /* I2C_SUPPORTS_CALLBACKS */
+      NVICEnableVector(I2C2_ER_IRQn,
+          CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+      rccEnableI2C2(FALSE);
+    }
+#endif
+  }
+
+  i2cp->id_i2c->CR1 = I2C_CR1_SWRST;        /* reset i2c peripherial */
+  i2cp->id_i2c->CR1 = 0;
+  i2c_lld_set_clock(i2cp);
+  i2c_lld_set_opmode(i2cp);
+  i2cp->id_i2c->CR1 |= 1;                   /* enable interface */
+}
+
+void i2c_lld_reset(I2CDriver *i2cp){
+  chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY),
+             "i2c_lld_reset: invalid state");
+
+  rccResetI2C1();
+}
+
+
+/**
+ * @brief Set clock speed.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_clock(I2CDriver *i2cp) {
+  volatile uint16_t regCCR, regCR2, freq, clock_div;
+  volatile uint16_t pe_bit_saved;
+  int32_t clock_speed = i2cp->id_config->clock_speed;
+  i2cdutycycle_t duty = i2cp->id_config->duty_cycle;
+
+  chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+             "i2c_lld_set_clock");
+
+  /**************************************************************************
+   * CR2 Configuration
+   */
+  regCR2 = i2cp->id_i2c->CR2;                   /* Get the I2Cx CR2 value */
+  regCR2 &= (uint16_t)~I2C_CR2_FREQ;            /* Clear frequency FREQ[5:0] bits */
+  freq = (uint16_t)(STM32_PCLK1 / 1000000);     /* Set frequency bits depending on pclk1 value */
+#ifdef STM32F4XX
+  chDbgCheck((freq >= 2) && (freq <= 42),
+                "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+#else
+  chDbgCheck((freq >= 2) && (freq <= 36),
+              "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+#endif
+  regCR2 |= freq;
+  i2cp->id_i2c->CR2 = regCR2;
+
+  /**************************************************************************
+   * CCR Configuration
+   */
+  pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE);
+  i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE;                   /* Disable the selected I2C peripheral to configure TRISE */
+  regCCR = 0;                                                   /* Clear F/S, DUTY and CCR[11:0] bits */
+  clock_div = I2C_CCR_CCR;
+
+  if (clock_speed <= 100000) {                                  /* Configure clock_div in standard mode */
+    chDbgAssert(duty == STD_DUTY_CYCLE,
+                "i2c_lld_set_clock(), #1",
+                "Invalid standard mode duty cycle");
+    clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));    /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
+    if (clock_div < 0x04) clock_div = 0x04;                     /* Test if CCR value is under 0x4, and set the minimum allowed value */
+    regCCR |= (clock_div & I2C_CCR_CCR);                        /* Set clock_div value for standard mode */
+    i2cp->id_i2c->TRISE = freq + 1;                             /* Set Maximum Rise Time for standard mode */
+  }
+  else if(clock_speed <= 400000) {                              /* Configure clock_div in fast mode */
+    chDbgAssert((duty == FAST_DUTY_CYCLE_2) ||
+                (duty == FAST_DUTY_CYCLE_16_9),
+                "i2c_lld_set_clock(), #2",
+                "Invalid fast mode duty cycle");
+    if(duty == FAST_DUTY_CYCLE_2) {
+      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));  /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
+    }
+    else if(duty == FAST_DUTY_CYCLE_16_9) {
+      clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25)); /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
+      regCCR |= I2C_CCR_DUTY;                                   /* Set DUTY bit */
+    }
+    if(clock_div < 0x01) clock_div = 0x01;                      /* Test if CCR value is under 0x1, and set the minimum allowed value */
+    regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));         /* Set clock_div value and F/S bit for fast mode*/
+    i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1;              /* Set Maximum Rise Time for fast mode */
+  }
+  chDbgAssert((clock_div <= I2C_CCR_CCR),
+      "i2c_lld_set_clock(), #3", "Too low clock clock speed selected");
+
+  i2cp->id_i2c->CCR = regCCR;                                   /* Write to I2Cx CCR */
+  i2cp->id_i2c->CR1 |= pe_bit_saved;                            /* restore the I2C peripheral enabled state */
+}
+
+/**
+ * @brief Set operation mode of I2C hardware.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_opmode(I2CDriver *i2cp) {
+  i2copmode_t opmode = i2cp->id_config->op_mode;
+  uint16_t regCR1;
+
+  regCR1 = i2cp->id_i2c->CR1;             /* Get the I2Cx CR1 value */
+  switch(opmode){
+  case OPMODE_I2C:
+    regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+    break;
+  case OPMODE_SMBUS_DEVICE:
+    regCR1 |= I2C_CR1_SMBUS;
+    regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+    break;
+  case OPMODE_SMBUS_HOST:
+    regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+    break;
+  }
+
+  i2cp->id_i2c->CR1 = regCR1;             /* Write to I2Cx CR1 */
+}
+
+/**
+ * @brief Set own address.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_own_address(I2CDriver *i2cp) {
+  /* TODO: dual address mode */
+
+  i2cp->id_i2c->OAR1 |= 1 << 14;
+
+  if (&(i2cp->id_config->own_addr_10) == NULL){       /* only 7-bit address */
+    i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE);
+    i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_7 << 1;
+  }
+  else {
+    chDbgAssert((i2cp->id_config->own_addr_10 < 1024),
+        "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit")
+    i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE;
+    i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_10;
+  }
+}
+
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp      pointer to the @p I2CDriver object
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+  if (i2cp->id_state == I2C_READY) {  /* If in ready state then disables the I2C clock.*/
+#if STM32_I2C_USE_I2C1
+    if (&I2CD1 == i2cp) {
+      NVICDisableVector(I2C1_EV_IRQn);
+      NVICDisableVector(I2C1_ER_IRQn);
+      rccDisableI2C1(FALSE);
+    }
+#endif
+#if STM32_I2C_USE_I2C2
+    if (&I2CD2 == i2cp) {
+      NVICDisableVector(I2C2_EV_IRQn);
+      NVICDisableVector(I2C2_ER_IRQn);
+      rccDisableI2C2(FALSE);
+    }
+#endif
+  }
+
+  i2cp->id_state = I2C_STOP;
+}
+
+
+#if I2C_SUPPORTS_CALLBACKS
+/**
+ * @brief Transmits data via the I2C bus as master.
+ *
+ * @param[in] i2cp        pointer to the @p I2CDriver object
+ * @param[in] slave_addr  Slave device address. Bits 0-9 contain slave
+ *                        device address. Bit 15 must be set to 1 if 10-bit
+ *                        addressing modes used. Otherwise	keep it cleared.
+ *                        Bits 10-14 unused.
+ * @param[in] txbuf       pointer to the transmit buffer
+ * @param[in] txbytes     number of bytes to be transmitted
+ * @param[in] rxbuf       pointer to the receive buffer
+ * @param[in] rxbytes     number of bytes to be received
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) {
+
+  /* "waiting" for STOP bit routine*/
+  #if STM32_I2C_I2C1_USE_POLLING_WAIT
+    uint32_t timeout = I2C_POLLING_TIMEOUT;
+    while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout)
+      timeout--;
+    chDbgAssert((timeout > 0), "i2c_lld_master_transmit(), #1", "time to STOP is out");
+  #else
+    chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transmit(), #1", "time to STOP is out");
+    if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){
+      chSysLockFromIsr();
+      gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT);
+      i2cp->flags |= I2C_FLG_TIMER_ARMED;
+      chSysUnlockFromIsr();
+      return;
+    }
+  #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */
+
+  /* init driver fields */
+  i2cp->slave_addr = slave_addr;
+  i2cp->txbytes = txbytes;
+  i2cp->rxbytes = rxbytes;
+  i2cp->txbuf = txbuf;
+  i2cp->rxbuf = rxbuf;
+
+  /* init address fields */
+  if(slave_addr & 0x8000){                                    /* 10-bit mode used */
+    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);          /* add the two msb of 10-bit address to the header */
+    i2cp->slave_addr1 |= 0xF0;                                /* add the header bits with LSB = 0 -> write */
+    i2cp->slave_addr2 = slave_addr & 0x00FF;                  /* the remaining 8 bit of 10-bit address */
+  }
+  else{
+    i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE);          /* LSB = 0 -> write */
+  }
+
+  /* setting flags and register bits */
+  i2cp->flags = 0;
+  i2cp->errors = 0;
+  i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+  i2cp->id_i2c->CR1 |= I2C_CR1_START;
+  i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */
+}
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp        pointer to the @p I2CDriver object
+ * @param[in] slave_addr  Slave device address. Bits 0-9 contain slave
+ *                        device address. Bit 15 must be set to 1 if 10-bit
+ *                        addressing modes used. Otherwise	keep it cleared.
+ *                        Bits 10-14 unused.
+ * @param[in] rxbuf       pointer to the receive buffer
+ * @param[in] rxbytes     number of bytes to be received
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *rxbuf, size_t rxbytes){
+
+  chDbgAssert((i2cp->id_i2c->SR1 + i2cp->id_i2c->SR2) == 0,
+        "i2c_lld_master_receive(), #1",
+        "some interrupt sources not clear");
+
+  /* "waiting" for STOP bit routine*/
+  #if STM32_I2C_I2C1_USE_POLLING_WAIT
+    uint32_t timeout = I2C_POLLING_TIMEOUT;
+    while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout)
+      timeout--;
+    chDbgAssert((timeout > 0), "i2c_lld_master_receive(), #1", "time to STOP is out");
+  #else
+    chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_receive(), #1", "time to STOP is out");
+    if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){
+      chSysLockFromIsr();
+      gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT);
+      i2cp->flags |= I2C_FLG_TIMER_ARMED;
+      chSysUnlockFromIsr();
+      return;
+    }
+  #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */
+
+  /* init driver fields */
+	i2cp->slave_addr = slave_addr;
+	i2cp->rxbytes = rxbytes;
+	i2cp->rxbuf = rxbuf;
+
+	/* init address fields */
+  if(slave_addr & 0x8000){                            /* 10-bit mode used */
+    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);  /* add the two msb of 10-bit address to the header */
+    i2cp->slave_addr1 |= 0xF0;                        /* add the header bits (the LSB -> 1 will be add to second */
+    i2cp->slave_addr2 = slave_addr & 0x00FF;          /* the remaining 8 bit of 10-bit address */
+  }
+  else{
+    i2cp->slave_addr1 = ((slave_addr <<1) | 0x01);    /* LSB = 1 -> receive */
+  }
+
+  /* setting flags and register bits */
+  i2cp->flags |= I2C_FLG_MASTER_RECEIVER;
+  i2cp->errors = 0;
+
+  i2cp->id_i2c->CR1 |= I2C_CR1_ACK;                   /* acknowledge returned */
+  i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+
+  if(i2cp->rxbytes == 1) {                            /* Only one byte to be received */
+    i2cp->flags |= I2C_FLG_1BTR;
+  }
+  else if(i2cp->rxbytes == 2) {                       /* Only two bytes to be received */
+    i2cp->flags |= I2C_FLG_2BTR;
+    i2cp->id_i2c->CR1 |= I2C_CR1_POS;                 /* Acknowledge Position */
+  }
+
+  i2cp->id_i2c->CR1 |= I2C_CR1_START;                 /* send start bit */
+  i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */
+}
+
+
+/**
+ * @brief Realize read-though-write behavior.
+ *
+ * @param[in] i2cp        pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_master_transceive(I2CDriver *i2cp){
+
+  chDbgAssert((i2cp != NULL) && (i2cp->slave_addr1 != 0) &&\
+      (i2cp->rxbytes > 0) && (i2cp->rxbuf != NULL),
+      "i2c_lld_master_transceive(), #1",
+      "");
+
+  i2cp->id_state = I2C_ACTIVE_TRANSCEIVE;
+
+  /* "waiting" for START bit routine*/
+  #if STM32_I2C_I2C1_USE_POLLING_WAIT
+    uint32_t timeout = I2C_POLLING_TIMEOUT;
+    while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout);
+      timeout--;
+    chDbgAssert((timeout > 0), "i2c_lld_master_transceive(), #1", "time to START is out");
+  #else
+    chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transceive(), #1", "time to START is out");
+    if ((i2cp->id_i2c->CR1 & I2C_CR1_START) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){
+      chSysLockFromIsr();
+      gptStartOneShotI(i2cp->timer, I2C_START_GPT_TIMEOUT);
+      i2cp->flags |= I2C_FLG_TIMER_ARMED;
+      chSysUnlockFromIsr();
+      return;
+    }
+  #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */
+
+  /* init address fields */
+  if(i2cp->slave_addr & 0x8000){                          /* 10-bit mode used */
+    i2cp->slave_addr1 = ((i2cp->slave_addr >>7) & 0x0006);/* add the two msb of 10-bit address to the header */
+    i2cp->slave_addr1 |= 0xF0;                            /* add the header bits (the LSB -> 1 will be add to second */
+    i2cp->slave_addr2 = i2cp->slave_addr & 0x00FF;        /* the remaining 8 bit of 10-bit address */
+  }
+  else{
+    i2cp->slave_addr1 |= 0x01;
+  }
+
+  /* setting flags and register bits */
+  i2cp->flags |= I2C_FLG_MASTER_RECEIVER;
+  i2cp->errors = 0;
+  i2cp->id_i2c->CR1 |= I2C_CR1_ACK;                       /* acknowledge returned */
+  i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+
+  if(i2cp->rxbytes == 1) {                                /* Only one byte to be received */
+    i2cp->flags |= I2C_FLG_1BTR;
+  }
+  else if(i2cp->rxbytes == 2) {                           /* Only two bytes to be received */
+    i2cp->flags |= I2C_FLG_2BTR;
+    i2cp->id_i2c->CR1 |= I2C_CR1_POS;                     /* Acknowledge Position */
+  }
+
+  i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);  /* enable ERR, EVT & BUF ITs */
+}
+
+#else /*I2C_SUPPORTS_CALLBACKS*/
+
+/**
+ * @brief Synchronously transmits data via the I2C bus as master.
+ *
+ * @param[in] i2cp        pointer to the @p I2CDriver object
+ * @param[in] slave_addr  Slave device address. Bits 0-9 contain slave
+ *                        device address. Bit 15 must be set to 1 if 10-bit
+ *                        addressing modes used. Otherwise  keep it cleared.
+ *                        Bits 10-14 unused.
+ * @param[in] txbuf       pointer to the transmit buffer
+ * @param[in] txbytes     number of bytes to be transmitted
+ * @param[in] rxbuf       pointer to the receive buffer
+ * @param[in] rxbytes     number of bytes to be received
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) {
+
+  /* init driver fields */
+  i2cp->slave_addr = slave_addr;
+  i2cp->txbytes = txbytes;
+  i2cp->rxbytes = rxbytes;
+  i2cp->txbuf = txbuf;
+  i2cp->rxbuf = rxbuf;
+
+  /* init address fields */
+  if(slave_addr & 0x8000){                                    /* 10-bit mode used */
+    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);          /* add the two msb of 10-bit address to the header */
+    i2cp->slave_addr1 |= 0xF0;                                /* add the header bits with LSB = 0 -> write */
+    i2cp->slave_addr2 = slave_addr & 0x00FF;                  /* the remaining 8 bit of 10-bit address */
+  }
+  else{
+    i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE);          /* LSB = 0 -> write */
+  }
+
+  i2cp->flags = 0;
+  i2cp->errors = 0;
+  i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+  i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN;                      /* disable event interrupts */
+  i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN;                       /* enable error interrupts */
+
+  i2cp->id_i2c->CR1 |= I2C_CR1_START;
+  while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB))
+    ;
+  i2cp->id_i2c->DR = i2cp->slave_addr1;
+  while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR))
+    ;
+  while (!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY))
+    ;
+  i2cp->id_i2c->DR = *txbuf;
+  txbuf++;
+  i2cp->txbytes--;
+  while(i2cp->txbytes > 0){
+    while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF))
+      ;
+    i2cp->id_i2c->DR = *txbuf;
+    txbuf++;
+    i2cp->txbytes--;
+  }
+  while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF))
+    ;
+  if(rxbytes == 0){
+    i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+    while (i2cp->id_i2c->CR1 & I2C_CR1_STOP)
+      ;
+    }
+  else{
+    i2c_lld_master_receive(i2cp, slave_addr, rxbuf, rxbytes);
+  }
+}
+
+
+/**
+ * @brief Synchronously receives data from the I2C bus.
+ *
+ * @param[in] i2cp        pointer to the @p I2CDriver object
+ * @param[in] slave_addr  Slave device address. Bits 0-9 contain slave
+ *                        device address. Bit 15 must be set to 1 if 10-bit
+ *                        addressing modes used. Otherwise  keep it cleared.
+ *                        Bits 10-14 unused.
+ * @param[in] rxbuf       pointer to the receive buffer
+ * @param[in] rxbytes     number of bytes to be received
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *rxbuf, size_t rxbytes){
+
+  /* init driver fields */
+  i2cp->slave_addr = slave_addr;
+  i2cp->rxbytes = rxbytes;
+  i2cp->rxbuf = rxbuf;
+
+  /* init address fields */
+  if(slave_addr & 0x8000){                            /* 10-bit mode used */
+    i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006);  /* add the two msb of 10-bit address to the header */
+    i2cp->slave_addr1 |= 0xF0;                        /* add the header bits (the LSB -> 1 will be add to second */
+    i2cp->slave_addr2 = slave_addr & 0x00FF;          /* the remaining 8 bit of 10-bit address */
+  }
+  else{
+    i2cp->slave_addr1 = ((slave_addr <<1) | 0x01);    /* LSB = 1 -> receive */
+  }
+
+
+  /* setting flags and register bits */
+  i2cp->flags = 0;
+  i2cp->errors = 0;
+  i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+  i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN;              /* disable event interrupts */
+  i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN;               /* enable error interrupts */
+
+  i2cp->id_i2c->CR1 |= I2C_CR1_START;
+  while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB))
+    ;
+
+  i2cp->id_i2c->DR = i2cp->slave_addr1;
+  while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR))
+    ;
+
+  if(i2cp->rxbytes >= 3){                             /* more than 2 bytes receiving procedure */
+    while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY))        /* to clear ADDR bit */
+      ;
+    while(i2cp->rxbytes > 3){
+      while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF))
+        ;
+      *rxbuf = i2cp->id_i2c->DR;
+      rxbuf++;
+      i2cp->rxbytes--;
+    }
+    while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF))          /* stopping procedure */
+      ;
+    i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK;
+    chSysLock();
+    i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+    *rxbuf = i2cp->id_i2c->DR;
+    rxbuf++;
+    i2cp->rxbytes--;
+    chSysUnlock();
+    while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE))
+      ;
+    *rxbuf = i2cp->id_i2c->DR;
+    rxbuf++;
+    i2cp->rxbytes--;
+    while (i2cp->id_i2c->CR1 & I2C_CR1_STOP)
+      ;
+    i2cp->id_i2c->CR1 |= I2C_CR1_ACK;
+  }
+  else{                                                 /* 1 or 2 bytes receiving procedure */
+    if(i2cp->rxbytes == 2){
+      i2cp->id_i2c->CR1 |= I2C_CR1_POS;
+      chSysLock();
+      while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY))        /* to clear ADDR bit */
+        ;
+      i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK;
+      chSysUnlock();
+      while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF))
+        ;
+      chSysLock();
+      i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+      *rxbuf = i2cp->id_i2c->DR;
+      rxbuf++;
+      i2cp->rxbytes--;
+      chSysUnlock();
+      *rxbuf = i2cp->id_i2c->DR;
+      rxbuf++;
+      i2cp->rxbytes--;
+      while (i2cp->id_i2c->CR1 & I2C_CR1_STOP)
+        ;
+      i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+      i2cp->id_i2c->CR1 |= I2C_CR1_ACK;
+    }
+    else{ /* 1 byte */
+      i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK;
+      chSysLock();
+      while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY))       /* to clear ADDR bit */
+        ;
+      i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+      chSysUnlock();
+      while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE))
+        ;
+      *rxbuf = i2cp->id_i2c->DR;
+      rxbuf++;
+      i2cp->rxbytes--;
+      while (i2cp->id_i2c->CR1 & I2C_CR1_STOP)
+        ;
+      i2cp->id_i2c->CR1 |= I2C_CR1_ACK;
+    }
+  }
+}
+#endif /* I2C_SUPPORTS_CALLBACKS */
+
+#undef rxBuffp
+#undef txBuffp
+
+#endif /* HAL_USE_I2C */
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h
new file mode 100644
index 000000000..81a9f62dc
--- /dev/null
+++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h
@@ -0,0 +1,318 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+                 2011 Giovanni Di Sirio.
+
+    This file is part of ChibiOS/RT.
+
+    ChibiOS/RT is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS/RT is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings.                                         */
+/*===========================================================================*/
+
+/**
+ * @name    Configuration options
+ * @{
+ */
+/**
+ * @brief Switch between callback based and synchronouse driver.
+ * @note  The default is synchronouse.
+ */
+#if !defined(I2C_SUPPORTS_CALLBACKS) || defined(__DOXYGEN__)
+#define I2C_SUPPORTS_CALLBACKS              TRUE
+#endif
+
+/**
+ * @brief I2C1 driver synchronization choice between GPT and polling.
+ * @note The default is polling wait.
+ */
+#if !defined(STM32_I2C_I2C1_USE_GPT_TIM)       || \
+    !defined(STM32_I2C_I2C1_USE_POLLING_WAIT)  || \
+    defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_USE_POLLING_WAIT     TRUE
+#endif
+
+/**
+ * @brief I2C2 driver synchronization choice between GPT and polling.
+ * @note The default is polling wait.
+ */
+#if !defined(STM32_I2C_I2C2_USE_GPT_TIM)       || \
+    !defined(STM32_I2C_I2C2_USE_POLLING_WAIT)  || \
+    defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_USE_POLLING_WAIT     TRUE
+#endif
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1              TRUE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2              TRUE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY     0xA0
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY     0xA0
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks.                                       */
+/*===========================================================================*/
+
+/** @brief  EV5 */
+#define I2C_EV5_MASTER_MODE_SELECT          ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB))  /* BUSY, MSL and SB flag */
+/** @brief  EV6 */
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED    ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE))  /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EV6_MASTER_REC_MODE_SELECTED    ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR))  /* BUSY, MSL and ADDR flags */
+/** @brief  EV7 */
+#define I2C_EV7_MASTER_REC_BYTE_RECEIVED    ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE))             /* BUSY, MSL and RXNE flags */
+#define I2C_EV7_MASTER_REC_BYTE_QUEUED      ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/
+/** @brief  EV8 */
+#define I2C_EV8_MASTER_BYTE_TRANSMITTING    ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE))   /* TRA, BUSY, MSL, TXE flags */
+/** @brief  EV8_2 */
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED   ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE))  /* TRA, BUSY, MSL, TXE and BTF flags */
+/** @brief  EV9 */
+#define I2C_EV9_MASTER_ADDR_10BIT           ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10))  /* BUSY, MSL and ADD10 flags */
+#define I2C_EV_MASK                         0x00FFFFFF  /* First byte zeroed because there is no need of PEC register part from SR2 */
+
+#define I2C_FLG_1BTR            0x01 /* Single byte to be received and processed */
+#define I2C_FLG_2BTR            0x02 /* Two bytes to be received and processed */
+#define I2C_FLG_3BTR            0x04 /* Last three received bytes to be processed */
+#define I2C_FLG_MASTER_RECEIVER 0x10
+#define I2C_FLG_HEADER_SENT     0x80
+#define I2C_FLG_TIMER_ARMED     0x40 /* Used to check locks on the bus */
+
+#define EV6_SUBEV_MASK  (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define EV7_SUBEV_MASK  (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+
+#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS  (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS  (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+
+/*===========================================================================*/
+/* Driver data structures and types.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+typedef enum {
+  OPMODE_I2C = 1,
+  OPMODE_SMBUS_DEVICE = 2,
+  OPMODE_SMBUS_HOST = 3,
+} i2copmode_t;
+
+typedef enum {
+  STD_DUTY_CYCLE = 1,
+  FAST_DUTY_CYCLE_2 = 2,
+  FAST_DUTY_CYCLE_16_9 = 3,
+} i2cdutycycle_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+  i2copmode_t     op_mode;       /**< @brief Specifies the I2C mode.*/
+  uint32_t        clock_speed;   /**< @brief Specifies the clock frequency. Must be set to a value lower than 400kHz */
+  i2cdutycycle_t  duty_cycle;    /**< @brief Specifies the I2C fast mode duty cycle */
+  uint8_t         own_addr_7;    /**< @brief Specifies the first device 7-bit own address. */
+  uint16_t        own_addr_10;   /**< @brief Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */
+  uint8_t         nbit_own_addr; /**< @brief Specifies if 7-bit or 10-bit address is acknowledged */
+} I2CConfig;
+
+
+/**
+ * @brief   Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief   Type of a structure representing an I2C slave config.
+ */
+typedef struct I2CSlaveConfig I2CSlaveConfig;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+  /**
+   * @brief Driver state.
+   */
+  i2cstate_t            id_state;
+
+#if I2C_USE_WAIT
+  /**
+   * @brief Thread waiting for I/O completion.
+   */
+  Thread                *id_thread;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+  /**
+   * @brief Mutex protecting the bus.
+   */
+  Mutex                 id_mutex;
+#elif CH_USE_SEMAPHORES
+  Semaphore             id_semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+  /**
+   * @brief Current configuration data.
+   */
+  const I2CConfig       *id_config;
+  /**
+   * @brief Current slave configuration data.
+   */
+  const I2CSlaveConfig  *id_slave_config;
+
+  __IO size_t           txbytes;    /*!< @brief Number of bytes to be transmitted. */
+  __IO size_t           rxbytes;    /*!< @brief Number of bytes to be received. */
+  uint8_t               *rxbuf;     /*!< @brief Pointer to receive buffer. */
+  uint8_t               *txbuf;     /*!< @brief Pointer to transmit buffer.*/
+  uint8_t               *rxbuff_p;  /*!< @brief Pointer to the current byte in slave rx buffer. */
+  uint8_t               *txbuff_p;  /*!< @brief Pointer to the current byte in slave tx buffer. */
+
+  __IO i2cflags_t       errors;     /*!< @brief Error flags.*/
+  __IO i2cflags_t       flags;      /*!< @brief State flags.*/
+
+  uint16_t              slave_addr; /*!< @brief Current slave address. */
+  uint8_t               slave_addr1;/*!< @brief 7-bit address of the slave with r\w bit.*/
+  uint8_t               slave_addr2;/*!< @brief Uses in 10-bit address mode. */
+
+#if CH_USE_EVENTS
+  EventSource           sevent;     /*!< @brief Status Change @p EventSource.*/
+#endif
+
+  /*********** End of the mandatory fields. **********************************/
+
+  /**
+   * @brief Pointer to the I2Cx registers block.
+   */
+  I2C_TypeDef           *id_i2c;
+
+#if !(STM32_I2C_I2C1_USE_POLLING_WAIT)
+  /* TODO: capability to switch this GPT fields off */
+  /**
+   * @brief Timer for waiting STOP condition on the bus.
+   * @details This is workaround for STM32 buggy I2C cell.
+   */
+  GPTDriver             *timer;
+
+  /**
+   * @brief Config for workaround timer.
+   */
+  const GPTConfig       *timer_cfg;
+#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */
+};
+
+
+/*===========================================================================*/
+/* Driver macros.                                                            */
+/*===========================================================================*/
+
+#define i2c_lld_bus_is_busy(i2cp)                                           \
+  (i2cp->id_i2c->SR2 & I2C_SR2_BUSY)
+
+
+/* Wait until BUSY flag is reset: a STOP has been generated on the bus
+ * signaling the end of transmission. Normally this wait function
+ * does not block thread, only if slave not response it does.
+ */
+#define i2c_lld_wait_bus_free(i2cp) {                                       \
+  uint32_t tmo = 0xfffff;                                                   \
+  while((i2cp->id_i2c->SR2 & I2C_SR2_BUSY) && tmo--)                        \
+    ;                                                                       \
+}
+
+/*===========================================================================*/
+/* External declarations.                                                    */
+/*===========================================================================*/
+
+/** @cond never*/
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void i2c_lld_init(void);
+void i2c_lld_reset(I2CDriver *i2cp);
+void i2c_lld_set_clock(I2CDriver *i2cp);
+void i2c_lld_set_opmode(I2CDriver *i2cp);
+void i2c_lld_set_own_address(I2CDriver *i2cp);
+void i2c_lld_start(I2CDriver *i2cp);
+void i2c_lld_stop(I2CDriver *i2cp);
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes);
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr,
+    uint8_t *rxbuf, size_t rxbytes);
+void i2c_lld_master_transceive(I2CDriver *i2cp);
+
+#ifdef __cplusplus
+}
+#endif
+/** @endcond*/
+
+#endif /* CH_HAL_USE_I2C  */
+
+#endif /* _I2C_LLD_H_ */