diff options
Diffstat (limited to 'testhal')
73 files changed, 9481 insertions, 1188 deletions
diff --git a/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile b/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile index a4de448..e2ad0c8 100644 --- a/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile +++ b/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile @@ -89,6 +89,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk
# HAL-OSAL files (optional).
@@ -106,18 +108,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX128.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -140,13 +137,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h b/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h index 5f05547..1750f63 100644 --- a/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h +++ b/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
- -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -438,20 +615,20 @@ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
- -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
/**
* @brief Idle thread enter hook.
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -496,15 +675,15 @@ #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
- -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
/** @} */
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-K20D50M/I2C/halconf_community.h b/testhal/KINETIS/FRDM-K20D50M/I2C/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-K20D50M/I2C/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile index a5f4c68..1f34aba 100644 --- a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile +++ b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk # HAL-OSAL files (optional). @@ -99,7 +101,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk include $(CHIBIOS)/os/hal/lib/streams/streams.mk include $(CHIBIOS)/os/various/shell/shell.mk @@ -108,22 +112,14 @@ LDSCRIPT= $(STARTUPLD)/MK20DX128.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ usbcfg.c \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -146,13 +142,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h index 222c5ea..0ac7be8 100644 --- a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h +++ b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,11 +25,11 @@ * @{ */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#define _CHIBIOS_RT_CONF_VER_5_1_ /*===========================================================================*/ /** @@ -42,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 1000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 0 +#endif /** @} */ @@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ -#define CH_CFG_TIME_QUANTUM 20 +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 2 +#endif /** * @brief Managed RAM size. @@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE +#endif /** @} */ @@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED TRUE +#endif /** @} */ @@ -141,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -149,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -158,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -166,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -177,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -185,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -195,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -205,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -215,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif /** * @brief Events Flags APIs. @@ -223,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -233,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -242,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -253,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -263,7 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -272,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE TRUE +#endif /** * @brief Heap Allocator APIs. @@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP TRUE +#endif /** * @brief Memory Pools Allocator APIs. @@ -293,7 +355,20 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif /** @} */ @@ -320,7 +461,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -329,7 +472,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif /** * @brief Debug option, parameters checks. @@ -338,7 +483,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_CHECKS FALSE +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif /** * @brief Debug option, consistency checks. @@ -348,16 +495,28 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_ENABLE_ASSERTS FALSE +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif /** * @brief Debug option, stacks initialization. @@ -379,7 +540,9 @@ * * @note The default is @p FALSE. */ -#define CH_DBG_FILL_THREADS FALSE +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif /** * @brief Debug option, threads profiling. @@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -402,6 +567,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -410,9 +591,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -422,10 +603,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode. */ #define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode. */ #define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf_community.h b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile b/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile index d5120b9..0a813ec 100644 --- a/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile +++ b/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile @@ -5,12 +5,12 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
- USE_COPT = -std=gnu99
+ USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,32 +88,32 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
+# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
+# HAL-OSAL files (optional).
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk
include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk
include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -131,13 +136,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
@@ -160,6 +163,7 @@ LD = $(TRGT)gcc #LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
OD = $(TRGT)objdump
SZ = $(TRGT)size
HEX = $(CP) -O ihex
diff --git a/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h b/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h index 5f05547..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h +++ b/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
- -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -438,20 +615,20 @@ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
- -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
/**
* @brief Idle thread enter hook.
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -496,15 +675,15 @@ #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
- -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
/** @} */
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL25Z/ADC/halconf_community.h b/testhal/KINETIS/FRDM-KL25Z/ADC/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL25Z/ADC/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile b/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile index 8ea9026..0a813ec 100644 --- a/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile +++ b/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,25 +101,19 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -135,12 +136,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h b/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h index 5d231c8..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h +++ b/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file FRDM-KL25Z/GPT/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL25Z/GPT/halconf_community.h b/testhal/KINETIS/FRDM-KL25Z/GPT/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL25Z/GPT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile b/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile index 8ea9026..0a813ec 100644 --- a/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile +++ b/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,25 +101,19 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -135,12 +136,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h b/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h index 2a25a25..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h +++ b/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file FRDM-KL25Z/PWM/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL25Z/PWM/halconf_community.h b/testhal/KINETIS/FRDM-KL25Z/PWM/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL25Z/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile b/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile index 39c7ccd..3c25877 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile +++ b/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nosys.specs -lnosys
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,27 +101,24 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-#include $(CHIBIOS)/test/rt/test.mk
-#include $(CHIBIOS)/os/hal/lib/streams/streams.mk
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
+include $(CHIBIOS)/os/hal/lib/streams/streams.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
usbcfg.c \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -137,13 +141,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
@@ -153,7 +155,7 @@ INCDIR = $(CHIBIOS)/os/license \ # Compiler settings
#
-MCU = cortex-m0
+MCU = cortex-m0plus
#TRGT = arm-elf-
TRGT = arm-none-eabi-
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h b/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h index 424cf02..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h +++ b/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -29,7 +29,7 @@ #define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -433,7 +610,14 @@ /**
* @brief Context switch hook.
- * @details This hook is invoked jus * @brief ISR enter hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
@@ -447,19 +631,13 @@ }
/**
-t before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ t before switching between threads. * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h b/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h index b2f75af..fb7ebf6 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h +++ b/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h @@ -81,14 +81,35 @@ #endif
/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
* @brief Enables the USBH subsystem.
*/
#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
-#define HAL_USE_USBH FALSE
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
#endif
/**
- * @brief Enables the USB HID subsystem.
+ * @brief Enables the USB_HID subsystem.
*/
#if !defined(HAL_USE_USB_HID) || defined(__DOXYGEN__)
#define HAL_USE_USB_HID TRUE
@@ -121,7 +142,25 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
- /*===========================================================================*/
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -129,13 +168,12 @@ * @brief Enables 24xx series I2C eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE24XX TRUE
+#define EEPROM_USE_EE24XX FALSE
/**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE25XX TRUE
-
+#define EEPROM_USE_EE25XX FALSE
#endif /* HALCONF_COMMUNITY_H */
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile index 57ab9e8..0eab704 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile +++ b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,7 +101,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
include $(CHIBIOS)/os/hal/lib/streams/streams.mk
include $(CHIBIOS)/os/various/shell/shell.mk
@@ -103,22 +112,14 @@ LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
$(TESTSRC) \
- $(STREAMSSRC) \
- $(SHELLSRC) \
usbcfg.c \
- main.c \
+ main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -141,13 +142,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(STREAMSINC) $(SHELLINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h index e89ec1f..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h +++ b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file FRDM-KL25Z/USB_SERIAL/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf_community.h b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf_community.h new file mode 100644 index 0000000..cf0b508 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf_community.h @@ -0,0 +1,180 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/** + * @brief Enables the USB_HID subsystem. + */ +#if !defined(HAL_USE_USB_HID) || defined(__DOXYGEN__) +#define HAL_USE_USB_HID FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile b/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile index 597f431..7ce4956 100644 --- a/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile +++ b/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -100,18 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -134,12 +136,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h b/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h index 5f05547..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h +++ b/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
- -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ +#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -438,20 +615,20 @@ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
- -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
/**
* @brief Idle thread enter hook.
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -496,15 +675,15 @@ #define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
- -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
/** @} */
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL26Z/I2C/halconf_community.h b/testhal/KINETIS/FRDM-KL26Z/I2C/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL26Z/I2C/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile b/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile index bca626d..7ce4956 100644 --- a/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile +++ b/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,25 +101,19 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
+ $(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -135,12 +136,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h b/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h index 9f9b3e9..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h +++ b/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file FRDM-KL26Z/PWM/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL26Z/PWM/halconf_community.h b/testhal/KINETIS/FRDM-KL26Z/PWM/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL26Z/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile index 3cf61b4..b71d3b1 100644 --- a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile +++ b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
# HAL-OSAL files (optional).
@@ -94,7 +101,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
include $(CHIBIOS)/os/hal/lib/streams/streams.mk
include $(CHIBIOS)/os/various/shell/shell.mk
@@ -103,22 +112,14 @@ LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
$(TESTSRC) \
- $(STREAMSSRC) \
- $(SHELLSRC) \
- main.c \
usbcfg.c \
+ main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -141,13 +142,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(STREAMSINC) $(SHELLINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h index 9c9a479..1750f63 100644 --- a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h +++ b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file FRDM-KL26Z/USB_SERIAL/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf_community.h b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/KL27Z/BLINK/Makefile b/testhal/KINETIS/KL27Z/BLINK/Makefile index 16025f3..cd6424e 100644 --- a/testhal/KINETIS/KL27Z/BLINK/Makefile +++ b/testhal/KINETIS/KL27Z/BLINK/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400 endif +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + # # Architecture or project specific options ############################################################################## @@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk # HAL-OSAL files (optional). @@ -100,18 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MKL27Z256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -134,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/KL27Z/BLINK/board/board.mk b/testhal/KINETIS/KL27Z/BLINK/board/board.mk index 14102c4..b410cdb 100644 --- a/testhal/KINETIS/KL27Z/BLINK/board/board.mk +++ b/testhal/KINETIS/KL27Z/BLINK/board/board.mk @@ -3,3 +3,7 @@ BOARDSRC = ./board/board.c # Required include directories
BOARDINC = ./board
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
diff --git a/testhal/KINETIS/KL27Z/BLINK/chconf.h b/testhal/KINETIS/KL27Z/BLINK/chconf.h index 49d21ae..1750f63 100644 --- a/testhal/KINETIS/KL27Z/BLINK/chconf.h +++ b/testhal/KINETIS/KL27Z/BLINK/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@ */
/**
- * @file KL27Z/BLINK/chconf.h
+ * @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/KL27Z/BLINK/halconf_community.h b/testhal/KINETIS/KL27Z/BLINK/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/KL27Z/BLINK/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile b/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile index 884d20e..8ff8acd 100644 --- a/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile +++ b/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk # HAL-OSAL files (optional). @@ -106,19 +108,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -141,13 +137,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h b/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h index a185459..1750f63 100644 --- a/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h +++ b/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file MCHCK/BOOTLOADER/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/MCHCK/BOOTLOADER/halconf_community.h b/testhal/KINETIS/MCHCK/BOOTLOADER/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/MCHCK/BOOTLOADER/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/MCHCK/PWM/Makefile b/testhal/KINETIS/MCHCK/PWM/Makefile index 884d20e..8ff8acd 100644 --- a/testhal/KINETIS/MCHCK/PWM/Makefile +++ b/testhal/KINETIS/MCHCK/PWM/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk # HAL-OSAL files (optional). @@ -106,19 +108,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -141,13 +137,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/MCHCK/PWM/chconf.h b/testhal/KINETIS/MCHCK/PWM/chconf.h index 2f2938a..1750f63 100644 --- a/testhal/KINETIS/MCHCK/PWM/chconf.h +++ b/testhal/KINETIS/MCHCK/PWM/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file MCHCK/PWM/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/MCHCK/PWM/halconf_community.h b/testhal/KINETIS/MCHCK/PWM/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/MCHCK/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile b/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile index b4d1ef8..cc51364 100644 --- a/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile +++ b/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk
# HAL-OSAL files (optional).
@@ -99,7 +101,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
include $(CHIBIOS)/os/hal/lib/streams/streams.mk
include $(CHIBIOS)/os/various/shell/shell.mk
@@ -109,22 +113,14 @@ LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
$(TESTSRC) \
- $(STREAMSSRC) \
- $(SHELLSRC) \
usbcfg.c \
- main.c \
+ main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
+CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
@@ -147,13 +143,11 @@ TCSRC = TCPPSRC =
# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+ASMSRC = $(ALLASMSRC)
+ASMXSRC = $(ALLXASMSRC)
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(STREAMSINC) $(SHELLINC)
+INCDIR = $(ALLINC) $(TESTINC) \
+ $(TESTHAL)
#
# Project, sources and paths
diff --git a/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h b/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h index 22272b1..1750f63 100644 --- a/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h +++ b/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file MCHCK/USB_SERIAL/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,15 +119,20 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
- * infinite loop. */
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -120,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -138,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -146,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -155,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -163,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -174,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -182,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -192,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -202,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -212,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -220,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -230,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -239,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -250,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -260,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -269,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -281,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -290,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -301,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -317,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -326,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -335,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -345,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -366,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -376,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -387,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -399,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -407,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -419,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -433,7 +613,7 @@ * @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
+ /* Context switch code here.*/ \
}
/**
@@ -456,7 +636,8 @@ * should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
-#define CH_CFG_IDLE_ENTER_HOOK() { \
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -465,7 +646,8 @@ * should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -509,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/MCHCK/USB_SERIAL/halconf_community.h b/testhal/KINETIS/MCHCK/USB_SERIAL/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/MCHCK/USB_SERIAL/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/ADC/Makefile b/testhal/KINETIS/TEENSY3_x/ADC/Makefile index 6510052..d12b346 100644 --- a/testhal/KINETIS/TEENSY3_x/ADC/Makefile +++ b/testhal/KINETIS/TEENSY3_x/ADC/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/ADC/chconf.h b/testhal/KINETIS/TEENSY3_x/ADC/chconf.h index 029e4ec..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/ADC/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/ADC/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY3_x/ADC/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/ADC/halconf_community.h b/testhal/KINETIS/TEENSY3_x/ADC/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/ADC/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile index fa5084c..1733c56 100644 --- a/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile +++ b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,14 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ eeprom.c \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +137,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h index 3bb57de..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@ */
/**
- * @file TEENSY3_x/EEPROM_EMU/chconf.h
+ * @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf_community.h b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/EXT/Makefile b/testhal/KINETIS/TEENSY3_x/EXT/Makefile index 6510052..d12b346 100644 --- a/testhal/KINETIS/TEENSY3_x/EXT/Makefile +++ b/testhal/KINETIS/TEENSY3_x/EXT/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/EXT/chconf.h b/testhal/KINETIS/TEENSY3_x/EXT/chconf.h index 0be6605..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/EXT/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/EXT/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY3_x/EXT/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/EXT/halconf_community.h b/testhal/KINETIS/TEENSY3_x/EXT/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/EXT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/GPT/Makefile b/testhal/KINETIS/TEENSY3_x/GPT/Makefile index 6510052..d12b346 100644 --- a/testhal/KINETIS/TEENSY3_x/GPT/Makefile +++ b/testhal/KINETIS/TEENSY3_x/GPT/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/GPT/chconf.h b/testhal/KINETIS/TEENSY3_x/GPT/chconf.h index 93ba7b8..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/GPT/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/GPT/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY3_x/GPT/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/GPT/halconf_community.h b/testhal/KINETIS/TEENSY3_x/GPT/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/GPT/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/PWM/Makefile b/testhal/KINETIS/TEENSY3_x/PWM/Makefile index 6510052..d12b346 100644 --- a/testhal/KINETIS/TEENSY3_x/PWM/Makefile +++ b/testhal/KINETIS/TEENSY3_x/PWM/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/PWM/chconf.h b/testhal/KINETIS/TEENSY3_x/PWM/chconf.h index a661f7e..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/PWM/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/PWM/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@ */
/**
- * @file TEENSY3_x/PWM/chconf.h
+ * @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
@@ -25,11 +25,11 @@ * @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -42,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -82,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -95,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -104,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -123,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -141,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -149,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -158,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -166,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -177,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -185,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -195,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -205,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -215,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -223,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -233,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -242,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -253,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -263,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -272,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -284,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -293,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -304,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -320,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -329,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -338,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -348,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -369,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -379,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -390,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -402,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -410,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -422,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -460,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -469,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -512,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/PWM/halconf_community.h b/testhal/KINETIS/TEENSY3_x/PWM/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile b/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile index 6510052..d12b346 100644 --- a/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile +++ b/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -88,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk # HAL-OSAL files (optional). @@ -105,19 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MK20DX256.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h b/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h index 27ed81c..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY3_x/SERIAL/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/SERIAL/halconf_community.h b/testhal/KINETIS/TEENSY3_x/SERIAL/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/SERIAL/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile index 055c3dc..0cd1dbc 100644 --- a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile +++ b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile @@ -1,225 +1,219 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk
-include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
-include $(CHIBIOS)/os/various/shell/shell.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/MK20DX256.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- $(STREAMSSRC) \
- $(SHELLSRC) \
- usbcfg.c \
- main.c \
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(STREAMSINC) $(SHELLINC)
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m4
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-SREC = $(CP) -O srec
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ + usbcfg.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h index 6dbecb5..1750f63 100644 --- a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h +++ b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY3_x/USB_SERIAL/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,15 +119,20 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
- * infinite loop. */
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -120,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -138,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -146,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -155,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -163,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -174,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -182,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -192,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -202,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -212,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -220,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -230,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -239,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -250,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -260,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -269,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -281,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -290,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -301,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -317,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -326,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -335,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -345,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -366,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -376,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -387,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -399,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -407,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -419,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -433,7 +613,7 @@ * @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
+ /* Context switch code here.*/ \
}
/**
@@ -456,7 +636,8 @@ * should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
-#define CH_CFG_IDLE_ENTER_HOOK() { \
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -465,7 +646,8 @@ * should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -509,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf_community.h b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile index f868337..71438e9 100644 --- a/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile +++ b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400 endif +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + # # Architecture or project specific options ############################################################################## @@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk # HAL-OSAL files (optional). @@ -100,18 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -134,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h index f0c238c..1750f63 100644 --- a/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h +++ b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY_LC/BOOTLOADER/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf_community.h b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile index a9534fc..812efc4 100644 --- a/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile +++ b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400 endif +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + # # Architecture or project specific options ############################################################################## @@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk # HAL-OSAL files (optional). @@ -96,23 +103,18 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). # Define linker script file here -LDSCRIPT = MKL26Z64.ld +LDSCRIPT= MKL26Z64.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ eeprom.c \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -135,13 +137,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h index 97c98b7..1750f63 100644 --- a/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h +++ b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY_LC/EEPROM_EMU/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf_community.h b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/testhal/KINETIS/TEENSY_LC/PWM/Makefile b/testhal/KINETIS/TEENSY_LC/PWM/Makefile index f868337..71438e9 100644 --- a/testhal/KINETIS/TEENSY_LC/PWM/Makefile +++ b/testhal/KINETIS/TEENSY_LC/PWM/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -69,6 +69,11 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400 endif +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + # # Architecture or project specific options ############################################################################## @@ -83,6 +88,8 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk # HAL-OSAL files (optional). @@ -100,18 +107,13 @@ LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -134,13 +136,11 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) $(TESTINC) \ + $(TESTHAL) # # Project, sources and paths diff --git a/testhal/KINETIS/TEENSY_LC/PWM/chconf.h b/testhal/KINETIS/TEENSY_LC/PWM/chconf.h index d910706..1750f63 100644 --- a/testhal/KINETIS/TEENSY_LC/PWM/chconf.h +++ b/testhal/KINETIS/TEENSY_LC/PWM/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,19 +15,21 @@ */
/**
- * @file TEENSY_LC/PWM/chconf.h
- * @brief Configuration file.
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
+#ifndef CHCONF_H
+#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_5_1_
/*===========================================================================*/
/**
@@ -40,14 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -57,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 0
+#endif
/** @} */
@@ -80,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
-#define CH_CFG_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 2
+#endif
/**
* @brief Managed RAM size.
@@ -93,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -102,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -121,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -139,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -147,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -156,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -164,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -175,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -183,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -193,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -203,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -213,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -221,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -231,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -240,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -251,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -261,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -270,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -282,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -291,7 +355,20 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -302,7 +379,73 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
/** @} */
@@ -318,7 +461,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -327,7 +472,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -336,7 +483,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -346,16 +495,28 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
+#endif
/**
* @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
+ * @details If enabled then the trace buffer is activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_ENABLE_TRACE TRUE
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -367,7 +528,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -377,7 +540,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -388,7 +553,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -400,6 +567,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -408,9 +591,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -420,10 +603,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -458,6 +637,7 @@ * @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -467,6 +647,7 @@ * @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -510,6 +691,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
-#endif /* _CHCONF_H_ */
+#endif /* CHCONF_H */
/** @} */
diff --git a/testhal/KINETIS/TEENSY_LC/PWM/halconf_community.h b/testhal/KINETIS/TEENSY_LC/PWM/halconf_community.h new file mode 100644 index 0000000..43fdbf8 --- /dev/null +++ b/testhal/KINETIS/TEENSY_LC/PWM/halconf_community.h @@ -0,0 +1,173 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__) +#define HAL_USE_COMP FALSE +#endif + +/** + * @brief Enables the QEI subsystem. + */ +#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) +#define HAL_USE_QEI FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB_MSD subsystem. + */ +#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) +#define HAL_USE_USB_MSD FALSE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + +/*===========================================================================*/ +/* QEI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables discard of overlow + */ +#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_DISCARD FALSE +#endif + +/** + * @brief Enables min max of overlow + */ +#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__) +#define QEI_USE_OVERFLOW_MINMAX FALSE +#endif + +/*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX FALSE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX FALSE + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ |