diff options
Diffstat (limited to 'testhal/NRF52/NRF52832/RADIO-ESB/nrf52_radio.h')
-rw-r--r-- | testhal/NRF52/NRF52832/RADIO-ESB/nrf52_radio.h | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/testhal/NRF52/NRF52832/RADIO-ESB/nrf52_radio.h b/testhal/NRF52/NRF52832/RADIO-ESB/nrf52_radio.h new file mode 100644 index 0000000..2f94465 --- /dev/null +++ b/testhal/NRF52/NRF52832/RADIO-ESB/nrf52_radio.h @@ -0,0 +1,256 @@ +/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is property of Nordic Semiconductor ASA. + * Terms and conditions of usage are described in detail in NORDIC + * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + * + * @brief Enhanced ShockBurst (ESB) is a basic protocol supporting two-way data + * packet communication including packet buffering, packet acknowledgment + * and automatic retransmission of lost packets. + * + * ported on: 25/10/2018, by andru + * + */ + +#ifndef NRF52_RADIO_H_ +#define NRF52_RADIO_H_ + +// Hard coded parameters - change if necessary +#ifndef NRF52_MAX_PAYLOAD_LENGTH +#define NRF52_MAX_PAYLOAD_LENGTH 32 /**< The max size of the payload. Valid values are 1 to 252 */ +#endif + +#define NRF52_CRC_RESET_VALUE 0xFFFF /**< CRC reset value*/ + +#define NRF52_TX_FIFO_SIZE 8 /**< The size of the transmission first in first out buffer. */ +#define NRF52_RX_FIFO_SIZE 8 /**< The size of the reception first in first out buffer. */ + +#define NRF52_RADIO_USE_TIMER0 FALSE /**< TIMER0 will be used by the module. */ +#define NRF52_RADIO_USE_TIMER1 TRUE /**< TIMER1 will be used by the module. */ +#define NRF52_RADIO_USE_TIMER2 FALSE /**< TIMER2 will be used by the module. */ +#define NRF52_RADIO_USE_TIMER3 FALSE /**< TIMER3 will be used by the module. */ +#define NRF52_RADIO_USE_TIMER4 FALSE /**< TIMER4 will be used by the module. */ + +#define NRF52_RADIO_IRQ_PRIORITY 3 /**< RADIO interrupt priority. */ +#define NRF52_RADIO_INTTHD_PRIORITY (NORMALPRIO+2) /**< Interrupts handle thread priority. */ +#define NRF52_RADIO_EVTTHD_PRIORITY (NORMALPRIO+1) /**< Events handle thread priority */ + +#define NRF52_RADIO_PPI_TIMER_START 10 /**< The PPI channel used for timer start. */ +#define NRF52_RADIO_PPI_TIMER_STOP 11 /**< The PPI channel used for timer stop. */ +#define NRF52_RADIO_PPI_RX_TIMEOUT 12 /**< The PPI channel used for RX timeout. */ +#define NRF52_RADIO_PPI_TX_START 13 /**< The PPI channel used for starting TX. */ + + +typedef enum { + NRF52_SUCCESS, /* Call was successful. */ + NRF52_INVALID_STATE, /* Module is not initialized. */ + NRF52_ERROR_BUSY, /* Module was not in idle state. */ + NRF52_ERROR_NULL, /* Required parameter was NULL. */ + NRF52_ERROR_INVALID_PARAM, /* Required parameter is invalid */ + NRF52_ERROR_NOT_SUPPORTED, /* p_payload->noack was false while selective ack was not enabled. */ + NRF52_ERROR_INVALID_LENGTH, /* Payload length was invalid (zero or larger than max allowed). */ +} nrf52_error_t; + +// Internal radio module state. +typedef enum { + NRF52_STATE_UNINIT, /**< Module not initialized. */ + NRF52_STATE_IDLE, /**< Module idle. */ + NRF52_STATE_PTX_TX, /**< Module transmitting without ack. */ + NRF52_STATE_PTX_TX_ACK, /**< Module transmitting with ack. */ + NRF52_STATE_PTX_RX_ACK, /**< Module transmitting with ack and reception of payload with the ack response. */ + NRF52_STATE_PRX, /**< Module receiving packets without ack. */ + NRF52_STATE_PRX_SEND_ACK, /**< Module transmitting ack in RX mode. */ +} nrf52_state_t; + +/**@brief Events to indicate the last transmission/receiving status. */ +typedef enum { + NRF52_EVENT_TX_SUCCESS = 0x01, /**< Event triggered on TX success. */ + NRF52_EVENT_TX_FAILED = 0x02, /**< Event triggered on TX failed. */ + NRF52_EVENT_RX_RECEIVED = 0x04, /**< Event triggered on RX Received. */ +} nrf52_event_t; + +// Interrupt flags +typedef enum { + NRF52_INT_TX_SUCCESS_MSK = 0x01, /**< The flag used to indicate a success since last event. */ + NRF52_INT_TX_FAILED_MSK = 0x02, /**< The flag used to indicate a failiure since last event. */ + NRF52_INT_RX_DR_MSK = 0x04, /**< The flag used to indicate a received packet since last event. */ +} nrf52_int_flags_t; + +/**Macro to create initializer for a TX data packet. + * + * @details This macro generates an initializer. It is more efficient + * than setting the individual parameters dynamically. + * + * @param[in] _pipe The pipe to use for the data packet. + * @param[in] ... Comma separated list of character data to put in the TX buffer. + * Supported values are from 1 to 63 characters. + * + * @return Initializer that sets up pipe, length and the byte array for content of the TX data. + */ +#define NRF52_CREATE_PAYLOAD(_pipe, ...) \ + {.pipe = _pipe, .length = NUM_VA_ARGS(__VA_ARGS__), .data = {__VA_ARGS__}}; \ + STATIC_ASSERT(NUM_VA_ARGS(__VA_ARGS__) > 0 && NUM_VA_ARGS(__VA_ARGS__) <= 63) + +/**@brief Enhanced ShockBurst protocol. */ +typedef enum { + NRF52_PROTOCOL_ESB, /*< Enhanced ShockBurst with fixed payload length. */ + NRF52_PROTOCOL_ESB_DPL /*< Enhanced ShockBurst with dynamic payload length. */ +} nrf52_protocol_t; + +/**@brief Enhanced ShockBurst mode. */ +typedef enum { + NRF52_MODE_PTX, /*< Primary transmitter mode. */ + NRF52_MODE_PRX /*< Primary receiver mode. */ +} nrf52_mode_t; + +/**@brief Enhanced ShockBurst bitrate mode. */ +typedef enum { + NRF52_BITRATE_2MBPS = RADIO_MODE_MODE_Nrf_2Mbit, /**< 2Mbit radio mode. */ + NRF52_BITRATE_1MBPS = RADIO_MODE_MODE_Nrf_1Mbit, /**< 1Mbit radio mode. */ +} nrf52_bitrate_t; + +/**@brief Enhanced ShockBurst CRC modes. */ +typedef enum { + NRF52_CRC_16BIT = RADIO_CRCCNF_LEN_Two, /**< Use two byte CRC. */ + NRF52_CRC_8BIT = RADIO_CRCCNF_LEN_One, /**< Use one byte CRC. */ + NRF52_CRC_OFF = RADIO_CRCCNF_LEN_Disabled /**< Disable CRC. */ +} nrf52_crc_t; + +/**@brief Enhanced ShockBurst radio transmission power modes. */ +typedef enum { + NRF52_TX_POWER_4DBM = RADIO_TXPOWER_TXPOWER_Pos4dBm, /**< 4 dBm radio transmit power. */ + NRF52_TX_POWER_0DBM = RADIO_TXPOWER_TXPOWER_0dBm, /**< 0 dBm radio transmit power. */ + NRF52_TX_POWER_NEG4DBM = RADIO_TXPOWER_TXPOWER_Neg4dBm, /**< -4 dBm radio transmit power. */ + NRF52_TX_POWER_NEG8DBM = RADIO_TXPOWER_TXPOWER_Neg8dBm, /**< -8 dBm radio transmit power. */ + NRF52_TX_POWER_NEG12DBM = RADIO_TXPOWER_TXPOWER_Neg12dBm, /**< -12 dBm radio transmit power. */ + NRF52_TX_POWER_NEG16DBM = RADIO_TXPOWER_TXPOWER_Neg16dBm, /**< -16 dBm radio transmit power. */ + NRF52_TX_POWER_NEG20DBM = RADIO_TXPOWER_TXPOWER_Neg20dBm, /**< -20 dBm radio transmit power. */ + NRF52_TX_POWER_NEG30DBM = RADIO_TXPOWER_TXPOWER_Neg30dBm /**< -30 dBm radio transmit power. */ +} nrf52_tx_power_t; + +/**@brief Enhanced ShockBurst transmission modes. */ +typedef enum { + NRF52_TXMODE_AUTO, /*< Automatic TX mode - When the TX fifo is non-empty and the radio is idle packets will be sent automatically. */ + NRF52_TXMODE_MANUAL, /*< Manual TX mode - Packets will not be sent until radio_start_tx() is called. Can be used to ensure consistent packet timing. */ + NRF52_TXMODE_MANUAL_START /*< Manual start TX mode - Packets will not be sent until radio_start_tx() is called, but transmission will continue automatically until the TX fifo is empty. */ +} nrf52_tx_mode_t; + +/**@brief Enhanced ShockBurst addresses. + * + * @details The module is able to transmit packets with the TX address stored in tx_address. + The module can also receive packets from peers with up to eight different tx_addresses + stored in esb_addr_p0 - esb_addr_p7. esb_addr_p0 can have 5 arbitrary bytes + independent of the other addresses. esb_addr_p1 - esb_addr_p7 will share the + same four byte base address found in the last four bytes of esb_addr_p1. + They have an independent prefix byte found in esb_addr_p1[0] and esb_addr_p2 - + esb_addr_p7. +*/ +typedef struct { + uint8_t base_addr_p0[4]; /**< Base address for pipe 0 encoded in big endian. */ + uint8_t base_addr_p1[4]; /**< Base address for pipe 1-7 encoded in big endian. */ + uint8_t pipe_prefixes[8]; /**< Address prefix for pipe P0 to P7. */ + uint8_t num_pipes; /**< Number of pipes available. */ + uint8_t addr_length; /**< Length of address including prefix */ + uint8_t rx_pipes; /**< Bitfield for enabled RX pipes. */ + uint8_t rf_channel; /**< Which channel is to be used. Must be in range 0 and 125 to be valid. */ +} nrf52_address_t; + +/**@brief Enhanced ShockBurst payload. + * + * @note The payload is used both for transmission and receive with ack and payload. +*/ +typedef struct +{ + uint8_t length; /**< Length of the packet. Should be equal or less than NRF_ESB_MAX_PAYLOAD_LENGTH. */ + uint8_t pipe; /**< Pipe used for this payload. */ + int8_t rssi; /**< RSSI for received packet. */ + uint8_t noack; /**< Flag indicating that this packet will not be acknowledged. */ + uint8_t pid; /**< PID assigned during communication. */ + uint8_t data[NRF52_MAX_PAYLOAD_LENGTH]; /**< The payload data. */ +} nrf52_payload_t; + +/**@brief Retransmit attempts delay and counter. */ +typedef struct { + uint16_t delay; /**< The delay between each retransmission of unacked packets. */ + uint16_t count; /**< The number of retransmissions attempts before transmission fail. */ +} nrf52_retransmit_t; + +/**@brief Main nrf_esb configuration struct. */ +typedef struct { + nrf52_protocol_t protocol; /**< Enhanced ShockBurst protocol. */ + nrf52_mode_t mode; /**< Enhanced ShockBurst default RX or TX mode. */ + + // General RF parameters + nrf52_bitrate_t bitrate; /**< Enhanced ShockBurst bitrate mode. */ + nrf52_crc_t crc; /**< Enhanced ShockBurst CRC mode. */ + nrf52_tx_power_t tx_power; /**< Enhanced ShockBurst radio transmission power mode.*/ + + // Control settings + nrf52_tx_mode_t tx_mode; /**< Enhanced ShockBurst transmit mode. */ + + bool selective_auto_ack; /**< Enable or disable selective auto acknowledgement. */ + + nrf52_retransmit_t retransmit; /**< Packet retransmit parameters */ + + uint8_t payload_length; /**< Enhanced ShockBurst static payload length */ + + nrf52_address_t address; /**< Address parameters structure */ +} nrf52_config_t; + +typedef struct { + /** + * @brief NRF52 radio peripheral. + */ + NRF_RADIO_Type *radio; + /** + * @brief NRF52 timer peripheral. + */ + NRF_TIMER_Type *timer; + /** + * @brief Driver state. + */ + nrf52_state_t state; + /** + * @brief RF parameters. + */ + nrf52_config_t config; + /** + * @brief Interrupts flag. + */ + nrf52_int_flags_t flags; + /** + * @brief TX attempt number. + */ + uint16_t tx_attempt; + /** + * @brief TX retransmits remaining. + */ + uint16_t tx_remaining; + /** + * @brief Radio events source. + */ + event_source_t eventsrc; +} RFDriver; + +extern RFDriver RFD1; + +nrf52_error_t radio_init(nrf52_config_t const *config); +nrf52_error_t radio_disable(void); +nrf52_error_t radio_write_payload(nrf52_payload_t const * p_payload); +nrf52_error_t radio_read_rx_payload(nrf52_payload_t * p_payload); +nrf52_error_t radio_start_tx(void); +nrf52_error_t radio_start_rx(void); +nrf52_error_t radio_stop_rx(void); +nrf52_error_t radio_flush_tx(void); +nrf52_error_t radio_flush_rx(void); +nrf52_error_t radio_pop_tx(void); +nrf52_error_t radio_set_base_address_0(uint8_t const * p_addr); +nrf52_error_t radio_set_base_address_1(uint8_t const * p_addr); +nrf52_error_t radio_set_prefixes(uint8_t const * p_prefixes, uint8_t num_pipes); +nrf52_error_t radio_set_prefix(uint8_t pipe, uint8_t prefix); + +#endif /* NRF52_RADIO_H_ */ |