diff options
| author | Fabio Utzig <utzig@utzig.org> | 2016-03-07 12:33:00 -0300 |
|---|---|---|
| committer | Fabio Utzig <utzig@utzig.org> | 2016-03-07 12:33:00 -0300 |
| commit | b67ecdfeca2d1d5289e4c9b577a1940cf8702ab3 (patch) | |
| tree | 9c78c9da3117a04f99d651ad8b774b6de18e4d83 /testhal/KINETIS | |
| parent | 37ac6a4611ca3625343ef1a17943e66459f825af (diff) | |
| download | ChibiOS-Contrib-b67ecdfeca2d1d5289e4c9b577a1940cf8702ab3.tar.gz ChibiOS-Contrib-b67ecdfeca2d1d5289e4c9b577a1940cf8702ab3.tar.bz2 ChibiOS-Contrib-b67ecdfeca2d1d5289e4c9b577a1940cf8702ab3.zip | |
[KINETIS] Move from main repo to contrib
Diffstat (limited to 'testhal/KINETIS')
| -rw-r--r-- | testhal/KINETIS/ADC/.cproject | 53 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/.project | 27 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/Makefile | 205 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/chconf.h | 499 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch | 31 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/halconf.h | 381 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/main.c | 132 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/mcuconf.h | 81 | ||||
| -rw-r--r-- | testhal/KINETIS/ADC/readme.txt | 14 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/Makefile | 206 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/chconf.h | 499 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/halconf.h | 381 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/main.c | 73 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/mcuconf.h | 76 | ||||
| -rw-r--r-- | testhal/KINETIS/I2C/readme.txt | 20 |
15 files changed, 2678 insertions, 0 deletions
diff --git a/testhal/KINETIS/ADC/.cproject b/testhal/KINETIS/ADC/.cproject new file mode 100644 index 0000000..4e28c4a --- /dev/null +++ b/testhal/KINETIS/ADC/.cproject @@ -0,0 +1,53 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="0.747687884"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.747687884" moduleId="org.eclipse.cdt.core.settings" name="Default"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration buildProperties="" description="" id="0.747687884" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> + <folderInfo id="0.747687884." name="/" resourcePath=""> + <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.11066026" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> + <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.11066026.1166893629" name=""/> + <builder id="org.eclipse.cdt.build.core.settings.default.builder.1831380856" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.libs.1419137561" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.1364315252" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.incpaths.718372197" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.479764409" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.754184888" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.incpaths.852559462" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.937950678" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1605316565" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.incpaths.363143178" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1077140712" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + </toolChain> + </folderInfo> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="RT-FREEDOM-KL25Z-ADC.null.299384367" name="RT-FREEDOM-KL25Z-ADC"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <scannerConfigBuildInfo instanceId="0.747687884"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"/> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> + <storageModule moduleId="refreshScope"/> +</cproject> diff --git a/testhal/KINETIS/ADC/.project b/testhal/KINETIS/ADC/.project new file mode 100644 index 0000000..0bd79df --- /dev/null +++ b/testhal/KINETIS/ADC/.project @@ -0,0 +1,27 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>RT-FREEDOM-KL25Z-ADC</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <triggers>full,incremental,</triggers> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.core.ccnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> +</projectDescription> diff --git a/testhal/KINETIS/ADC/Makefile b/testhal/KINETIS/ADC/Makefile new file mode 100644 index 0000000..d438436 --- /dev/null +++ b/testhal/KINETIS/ADC/Makefile @@ -0,0 +1,205 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT = -std=gnu99
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/KL2x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/KL25Z128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/KINETIS/ADC/chconf.h b/testhal/KINETIS/ADC/chconf.h new file mode 100644 index 0000000..b7a340d --- /dev/null +++ b/testhal/KINETIS/ADC/chconf.h @@ -0,0 +1,499 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE FALSE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/KINETIS/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch b/testhal/KINETIS/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch new file mode 100644 index 0000000..67d3e82 --- /dev/null +++ b/testhal/KINETIS/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="com.zylin.embeddedcdt.idleNative"> +<stringAttribute key="bad_container_name" value="/RT-MCHCK-K20-DMA/deb"/> +<booleanAttribute key="com.zylin.embeddedcdt.debugger_app_console" value="false"/> +<stringAttribute key="com.zylin.embeddedcdt.debugger_init_commands" value="target extended-remote localhost:3333 monitor reset init load monitor reset halt"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="/Users/derek/Documents/Arm/gcc-arm-none-eabi-4_8-2014q2/bin/arm-none-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="org.eclipse.cdt.debug.mi.core.standardCommandFactory"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.zylin.embeddedcdt.EmbeddedCDebugger"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/> +<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="false"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/> +<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/> +<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="*buffer-buffer-adc_end_cb-(format)" val="4"/><content id="sensor-adc_end_cb-(format)" val="0"/></contentList>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList> <memoryBlockExpressionItem> <expression text="0x1ffff928"/> </memoryBlockExpressionItem> </memoryBlockExpressionList> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="build/ch.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-FREEDOM-KL25Z-ADC"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1185372693"/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/RT-FREEDOM-KL25Z-ADC"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +</launchConfiguration> diff --git a/testhal/KINETIS/ADC/halconf.h b/testhal/KINETIS/ADC/halconf.h new file mode 100644 index 0000000..f8b4e8c --- /dev/null +++ b/testhal/KINETIS/ADC/halconf.h @@ -0,0 +1,381 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC TRUE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/KINETIS/ADC/main.c b/testhal/KINETIS/ADC/main.c new file mode 100644 index 0000000..f01051b --- /dev/null +++ b/testhal/KINETIS/ADC/main.c @@ -0,0 +1,132 @@ +/*
+ ChibiOS - Copyright (C) 2014 Derek Mulcahy
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#define ADC_GRP1_NUM_CHANNELS 2
+#define ADC_GRP1_BUF_DEPTH 1
+
+static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH];
+
+static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
+
+ (void)adcp;
+ (void)n;
+
+ /*
+ * The bandgap value represents the ADC reading for 1.0V
+ */
+ uint16_t sensor = buffer[0];
+ uint16_t bandgap = buffer[1];
+
+ /*
+ * The v25 value is the voltage reading at 25C, it comes from the ADC
+ * electricals table in the processor manual. V25 is in millivolts.
+ */
+ int32_t v25 = 716;
+
+ /*
+ * The m value is slope of the temperature sensor values, again from
+ * the ADC electricals table in the processor manual.
+ * M in microvolts per degree.
+ */
+ int32_t m = 1620;
+
+ /*
+ * Divide the temperature sensor reading by the bandgap to get
+ * the voltage for the ambient temperature in millivolts.
+ */
+ int32_t vamb = (sensor * 1000) / bandgap;
+
+ /*
+ * This formula comes from the reference manual.
+ * Temperature is in millidegrees C.
+ */
+ int32_t delta = (((vamb - v25) * 1000000) / m);
+ int32_t temp = 25000 - delta;
+
+ if (temp < 19000) {
+ /* Turn just the Blue LED on if less than 19C */
+ palSetPad(GPIOB,18); // Red
+ palSetPad(GPIOB,19); // Green
+ palClearPad(GPIOD,1); // Blue
+ } else if (temp > 28000) {
+ /* Turn just the Red LED on if greater than 28C */
+ palClearPad(GPIOB,18); // Red
+ palSetPad(GPIOB,19); // Green
+ palSetPad(GPIOD,1); // Blue
+ } else {
+ /* Turn just the Green LED on if between 19C and 28C */
+ palSetPad(GPIOB,18); // Red
+ palClearPad(GPIOB,19); // Green
+ palSetPad(GPIOD,1); // Blue
+ }
+}
+
+/*
+ * ADC conversion group.
+ * Mode: Linear buffer, 8 samples of 1 channel, SW triggered.
+ */
+static const ADCConversionGroup adcgrpcfg1 = {
+ false,
+ ADC_GRP1_NUM_CHANNELS,
+ adc_end_cb,
+ NULL,
+ ADC_TEMP_SENSOR | ADC_BANDGAP,
+ /* CFG1 Regiser - ADCCLK = SYSCLK / 16, 16 bits per sample */
+ ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) |
+ ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2) |
+ ADCx_CFG1_MODE(ADCx_CFG1_MODE_16_BITS),
+ /* SC3 Register - Average 32 readings per sample */
+ ADCx_SC3_AVGE |
+ ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES)
+};
+
+static const ADCConfig adccfg1 = {
+ /* Perform initial calibration */
+ true
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Activates the ADC1 driver.
+ */
+ adcStart(&ADCD1, &adccfg1);
+
+ while (1) {
+ /*
+ * ADC linear conversion.
+ */
+ adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH);
+
+ chThdSleepMilliseconds(500);
+ }
+}
diff --git a/testhal/KINETIS/ADC/mcuconf.h b/testhal/KINETIS/ADC/mcuconf.h new file mode 100644 index 0000000..03a7de5 --- /dev/null +++ b/testhal/KINETIS/ADC/mcuconf.h @@ -0,0 +1,81 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* FEI mode */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_SYSCLK_FREQUENCY 21000000UL
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define KINETIS_ADC_USE_ADC0 TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/testhal/KINETIS/ADC/readme.txt b/testhal/KINETIS/ADC/readme.txt new file mode 100644 index 0000000..4077343 --- /dev/null +++ b/testhal/KINETIS/ADC/readme.txt @@ -0,0 +1,14 @@ +*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0+ Freedom Board KL25Z. **
+*****************************************************************************
+
+The demo runs on an Freescale Freedom KL25Z board and demonstrates
+the usage of the ADC.
+
+It reads the internal temperature sensor. If the temperature drops
+below 20C (68F) it turns on the blue LED. If the temperature rises
+above 27C (81F) it turns on the red LED. Otherwise the green LED is
+illuminated.
+
+The internal bandgap voltage reference is used to calibrate the
+results returned from the temperature sensor.
diff --git a/testhal/KINETIS/I2C/Makefile b/testhal/KINETIS/I2C/Makefile new file mode 100644 index 0000000..9935923 --- /dev/null +++ b/testhal/KINETIS/I2C/Makefile @@ -0,0 +1,206 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0
+# USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/KINETIS/I2C/chconf.h b/testhal/KINETIS/I2C/chconf.h new file mode 100644 index 0000000..b7a340d --- /dev/null +++ b/testhal/KINETIS/I2C/chconf.h @@ -0,0 +1,499 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE FALSE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/KINETIS/I2C/halconf.h b/testhal/KINETIS/I2C/halconf.h new file mode 100644 index 0000000..6430fb2 --- /dev/null +++ b/testhal/KINETIS/I2C/halconf.h @@ -0,0 +1,381 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/KINETIS/I2C/main.c b/testhal/KINETIS/I2C/main.c new file mode 100644 index 0000000..8c0df50 --- /dev/null +++ b/testhal/KINETIS/I2C/main.c @@ -0,0 +1,73 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#define MMA8451_ADDR 0x1D
+#define WHO_AM_I 0x0D
+
+static bool i2cOk = false;
+
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+ chRegSetThreadName("Blinker");
+ while (TRUE) {
+ if (i2cOk) {
+ palSetPad(IOPORT3, 3);
+ palTogglePad(IOPORT4, 4);
+ } else {
+ palSetPad(IOPORT4, 4);
+ palTogglePad(IOPORT3, 3);
+ }
+ chThdSleepMilliseconds(500);
+ }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ uint8_t tx[1], rx[1];
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ palSetPad(IOPORT3, 3);
+ palSetPad(IOPORT4, 4);
+ palSetPad(IOPORT1, 2);
+
+ i2cStart(&I2CD1, NULL);
+
+ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ while (1) {
+ tx[0] = WHO_AM_I;
+ i2cMasterTransmitTimeout(&I2CD1, MMA8451_ADDR, tx, 1, rx, 1, TIME_INFINITE);
+ i2cOk = (rx[0] == 0x1A) ? true : false;
+ chThdSleepMilliseconds(2000);
+ }
+}
diff --git a/testhal/KINETIS/I2C/mcuconf.h b/testhal/KINETIS/I2C/mcuconf.h new file mode 100644 index 0000000..c5d56f2 --- /dev/null +++ b/testhal/KINETIS/I2C/mcuconf.h @@ -0,0 +1,76 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* Enable clock initialization by HAL */
+#define KINETIS_NO_INIT FALSE
+
+/* PEE mode - external 8 MHz crystal with PLL for 48 MHz core/system clock. */
+#if 1
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
+#define KINETIS_XTAL_FREQUENCY 8000000UL
+#define KINETIS_SYSCLK_FREQUENCY 48000000UL
+#endif
+
+/* FEI mode - 48 MHz with internal 32.768 kHz oscillator */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 FALSE
+#define KINETIS_I2C_USE_I2C0 TRUE
+#define KINETIS_I2C_I2C0_PRIORITY 8
+
+#endif /* _MCUCONF_H_ */
diff --git a/testhal/KINETIS/I2C/readme.txt b/testhal/KINETIS/I2C/readme.txt new file mode 100644 index 0000000..0a9a5fc --- /dev/null +++ b/testhal/KINETIS/I2C/readme.txt @@ -0,0 +1,20 @@ +*********************************************************************
+** ChibiOS/RT I2C test demo for Freedom Board K20D50M. **
+*********************************************************************
+
+** TARGET **
+
+The test runs on an Freescale Freedom K20D50M board.
+
+** The Demo **
+
+This test tries to access the onboard MMA8451 chip using the I2C bus.
+It sends the command WHO_AM_I which has a standard answer that can be
+verified. If the correct answer is received the GREEN led will blink.
+If no answer or invalid answer is received the RED led will blink.
+
+** Build Procedure **
+
+This test was built using the ARM GCC toolchain available at:
+
+https://launchpad.net/gcc-arm-embedded
|