[KINETIS] Added shell demo for FRDM-KL25Z

8 files changed, 1487 insertions, 0 deletions

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile
new file mode 100644
index 0000000..8366acd
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile
@@ -0,0 +1,218 @@
+##############################################################################

+# Build global options

+# NOTE: Can be overridden externally.

+#

+

+# Compiler options here.

+ifeq ($(USE_OPT),)

+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nosys.specs -lnosys -D SHELL_CONFIG_FILE

+endif

+

+# C specific options here (added to USE_OPT).

+ifeq ($(USE_COPT),)

+  USE_COPT =

+endif

+

+# C++ specific options here (added to USE_OPT).

+ifeq ($(USE_CPPOPT),)

+  USE_CPPOPT = -fno-rtti

+endif

+

+# Enable this if you want the linker to remove unused code and data

+ifeq ($(USE_LINK_GC),)

+  USE_LINK_GC = yes

+endif

+

+# Linker extra options here.

+ifeq ($(USE_LDOPT),)

+  USE_LDOPT =

+endif

+

+# Enable this if you want link time optimizations (LTO)

+ifeq ($(USE_LTO),)

+  USE_LTO = no

+endif

+

+# If enabled, this option allows to compile the application in THUMB mode.

+ifeq ($(USE_THUMB),)

+  USE_THUMB = yes

+endif

+

+# Enable this if you want to see the full log while compiling.

+ifeq ($(USE_VERBOSE_COMPILE),)

+  USE_VERBOSE_COMPILE = no

+endif

+

+# If enabled, this option makes the build process faster by not compiling

+# modules not used in the current configuration.

+ifeq ($(USE_SMART_BUILD),)

+  USE_SMART_BUILD = yes

+endif

+

+#

+# Build global options

+##############################################################################

+

+##############################################################################

+# Architecture or project specific options

+#

+

+# Stack size to be allocated to the Cortex-M process stack. This stack is

+# the stack used by the main() thread.

+ifeq ($(USE_PROCESS_STACKSIZE),)

+  USE_PROCESS_STACKSIZE = 0x200

+endif

+

+# Stack size to the allocated to the Cortex-M main/exceptions stack. This

+# stack is used for processing interrupts and exceptions.

+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)

+  USE_EXCEPTIONS_STACKSIZE = 0x400

+endif

+

+#

+# Architecture or project specific options

+##############################################################################

+

+##############################################################################

+# Project, sources and paths

+#

+

+# Define project name here

+PROJECT = ch

+

+# Imported source files and paths

+CHIBIOS = ../../../../ChibiOS-RT

+CHIBIOS_CONTRIB = ../../..

+# Startup files.

+include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk

+# HAL-OSAL files (optional).

+include $(CHIBIOS)/os/hal/hal.mk

+include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk

+include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk

+include $(CHIBIOS)/os/hal/osal/rt/osal.mk

+# RTOS files (optional).

+include $(CHIBIOS)/os/rt/rt.mk

+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk

+# Other files (optional).

+include $(CHIBIOS)/test/rt/test.mk

+include $(CHIBIOS)/os/hal/lib/streams/streams.mk

+include $(CHIBIOS)/os/various/shell/shell.mk

+

+# Define linker script file here

+LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld

+

+# C sources that can be compiled in ARM or THUMB mode depending on the global

+# setting.

+CSRC = $(STARTUPSRC) \

+       $(KERNSRC) \

+       $(PORTSRC) \

+       $(OSALSRC) \

+       $(HALSRC) \

+       $(PLATFORMSRC) \

+       $(BOARDSRC) \

+       $(TESTSRC) \

+       $(STREAMSSRC) \

+       $(SHELLSRC) \

+       shellcfg.c \

+       main.c

+

+# C++ sources that can be compiled in ARM or THUMB mode depending on the global

+# setting.

+CPPSRC =

+

+# C sources to be compiled in ARM mode regardless of the global setting.

+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler

+#       option that results in lower performance and larger code size.

+ACSRC =

+

+# C++ sources to be compiled in ARM mode regardless of the global setting.

+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler

+#       option that results in lower performance and larger code size.

+ACPPSRC =

+

+# C sources to be compiled in THUMB mode regardless of the global setting.

+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler

+#       option that results in lower performance and larger code size.

+TCSRC =

+

+# C sources to be compiled in THUMB mode regardless of the global setting.

+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler

+#       option that results in lower performance and larger code size.

+TCPPSRC =

+

+# List ASM source files here

+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)

+

+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \

+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \

+         $(STREAMSINC) $(SHELLINC)

+

+#

+# Project, sources and paths

+##############################################################################

+

+##############################################################################

+# Compiler settings

+#

+

+MCU  = cortex-m0

+

+#TRGT = arm-elf-

+TRGT = arm-none-eabi-

+CC   = $(TRGT)gcc

+CPPC = $(TRGT)g++

+# Enable loading with g++ only if you need C++ runtime support.

+# NOTE: You can use C++ even without C++ support if you are careful. C++

+#       runtime support makes code size explode.

+LD   = $(TRGT)gcc

+#LD   = $(TRGT)g++

+CP   = $(TRGT)objcopy

+AS   = $(TRGT)gcc -x assembler-with-cpp

+AR   = $(TRGT)ar

+OD   = $(TRGT)objdump

+SZ   = $(TRGT)size

+HEX  = $(CP) -O ihex

+BIN  = $(CP) -O binary

+SREC = $(CP) -O srec

+

+# ARM-specific options here

+AOPT =

+

+# THUMB-specific options here

+TOPT = -mthumb -DTHUMB

+

+# Define C warning options here

+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes

+

+# Define C++ warning options here

+CPPWARN = -Wall -Wextra -Wundef

+

+#

+# Compiler settings

+##############################################################################

+

+##############################################################################

+# Start of user section

+#

+

+# List all user C define here, like -D_DEBUG=1

+UDEFS =

+

+# Define ASM defines here

+UADEFS =

+

+# List all user directories here

+UINCDIR =

+

+# List the user directory to look for the libraries here

+ULIBDIR =

+

+# List all user libraries here

+ULIBS =

+

+#

+# End of user defines

+##############################################################################

+

+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC

+include $(RULESPATH)/rules.mk

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h
new file mode 100644
index 0000000..c78e879
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h
@@ -0,0 +1,516 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/chconf.h

+ * @brief   Configuration file template.

+ * @details A copy of this file must be placed in each project directory, it

+ *          contains the application specific kernel settings.

+ *

+ * @addtogroup config

+ * @details Kernel related settings and hooks.

+ * @{

+ */

+

+#ifndef CHCONF_H

+#define CHCONF_H

+

+#define _CHIBIOS_RT_CONF_

+

+/*===========================================================================*/

+/**

+ * @name System timers settings

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   System time counter resolution.

+ * @note    Allowed values are 16 or 32 bits.

+ */

+#define CH_CFG_ST_RESOLUTION                32

+

+/**

+ * @brief   System tick frequency.

+ * @details Frequency of the system timer that drives the system ticks. This

+ *          setting also defines the system tick time unit.

+ */

+#define CH_CFG_ST_FREQUENCY                 1000

+

+/**

+ * @brief   Time delta constant for the tick-less mode.

+ * @note    If this value is zero then the system uses the classic

+ *          periodic tick. This value represents the minimum number

+ *          of ticks that is safe to specify in a timeout directive.

+ *          The value one is not valid, timeouts are rounded up to

+ *          this value.

+ */

+#define CH_CFG_ST_TIMEDELTA                 0

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel parameters and options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Round robin interval.

+ * @details This constant is the number of system ticks allowed for the

+ *          threads before preemption occurs. Setting this value to zero

+ *          disables the preemption for threads with equal priority and the

+ *          round robin becomes cooperative. Note that higher priority

+ *          threads can still preempt, the kernel is always preemptive.

+ * @note    Disabling the round robin preemption makes the kernel more compact

+ *          and generally faster.

+ * @note    The round robin preemption is not supported in tickless mode and

+ *          must be set to zero in that case.

+ */

+#define CH_CFG_TIME_QUANTUM                 20

+

+/**

+ * @brief   Managed RAM size.

+ * @details Size of the RAM area to be managed by the OS. If set to zero

+ *          then the whole available RAM is used. The core memory is made

+ *          available to the heap allocator and/or can be used directly through

+ *          the simplified core memory allocator.

+ *

+ * @note    In order to let the OS manage the whole RAM the linker script must

+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.

+ * @note    Requires @p CH_CFG_USE_MEMCORE.

+ */

+#define CH_CFG_MEMCORE_SIZE                 0

+

+/**

+ * @brief   Idle thread automatic spawn suppression.

+ * @details When this option is activated the function @p chSysInit()

+ *          does not spawn the idle thread. The application @p main()

+ *          function becomes the idle thread and must implement an

+ *          infinite loop.

+ */

+#define CH_CFG_NO_IDLE_THREAD               FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Performance options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   OS optimization.

+ * @details If enabled then time efficient rather than space efficient code

+ *          is used when two possible implementations exist.

+ *

+ * @note    This is not related to the compiler optimization options.

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_OPTIMIZE_SPEED               TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Subsystem options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Time Measurement APIs.

+ * @details If enabled then the time measurement APIs are included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_TM                       FALSE

+

+/**

+ * @brief   Threads registry APIs.

+ * @details If enabled then the registry APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_REGISTRY                 TRUE

+

+/**

+ * @brief   Threads synchronization APIs.

+ * @details If enabled then the @p chThdWait() function is included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_WAITEXIT                 TRUE

+

+/**

+ * @brief   Semaphores APIs.

+ * @details If enabled then the Semaphores APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_SEMAPHORES               TRUE

+

+/**

+ * @brief   Semaphores queuing mode.

+ * @details If enabled then the threads are enqueued on semaphores by

+ *          priority rather than in FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

+

+/**

+ * @brief   Mutexes APIs.

+ * @details If enabled then the mutexes APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MUTEXES                  TRUE

+

+/**

+ * @brief   Enables recursive behavior on mutexes.

+ * @note    Recursive mutexes are heavier and have an increased

+ *          memory footprint.

+ *

+ * @note    The default is @p FALSE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

+

+/**

+ * @brief   Conditional Variables APIs.

+ * @details If enabled then the conditional variables APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_CONDVARS                 TRUE

+

+/**

+ * @brief   Conditional Variables APIs with timeout.

+ * @details If enabled then the conditional variables APIs with timeout

+ *          specification are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_CONDVARS.

+ */

+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

+

+/**

+ * @brief   Events Flags APIs.

+ * @details If enabled then the event flags APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_EVENTS                   TRUE

+

+/**

+ * @brief   Events Flags APIs with timeout.

+ * @details If enabled then the events APIs with timeout specification

+ *          are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_EVENTS.

+ */

+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

+

+/**

+ * @brief   Synchronous Messages APIs.

+ * @details If enabled then the synchronous messages APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MESSAGES                 TRUE

+

+/**

+ * @brief   Synchronous Messages queuing mode.

+ * @details If enabled then messages are served by priority rather than in

+ *          FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_MESSAGES.

+ */

+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

+

+/**

+ * @brief   Mailboxes APIs.

+ * @details If enabled then the asynchronous messages (mailboxes) APIs are

+ *          included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_MAILBOXES                TRUE

+

+/**

+ * @brief   Core Memory Manager APIs.

+ * @details If enabled then the core memory manager APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMCORE                  TRUE

+

+/**

+ * @brief   Heap Allocator APIs.

+ * @details If enabled then the memory heap allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

+ *          @p CH_CFG_USE_SEMAPHORES.

+ * @note    Mutexes are recommended.

+ */

+#define CH_CFG_USE_HEAP                     TRUE

+

+/**

+ * @brief   Memory Pools Allocator APIs.

+ * @details If enabled then the memory pools allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMPOOLS                 TRUE

+

+/**

+ * @brief   Dynamic Threads APIs.

+ * @details If enabled then the dynamic threads creation APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_WAITEXIT.

+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

+ */

+#define CH_CFG_USE_DYNAMIC                  TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Debug options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Debug option, kernel statistics.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_STATISTICS                   FALSE

+

+/**

+ * @brief   Debug option, system state check.

+ * @details If enabled the correct call protocol for system APIs is checked

+ *          at runtime.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE

+

+/**

+ * @brief   Debug option, parameters checks.

+ * @details If enabled then the checks on the API functions input

+ *          parameters are activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_CHECKS                TRUE

+

+/**

+ * @brief   Debug option, consistency checks.

+ * @details If enabled then all the assertions in the kernel code are

+ *          activated. This includes consistency checks inside the kernel,

+ *          runtime anomalies and port-defined checks.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_ASSERTS               TRUE

+

+/**

+ * @brief   Debug option, trace buffer.

+ * @details If enabled then the context switch circular trace buffer is

+ *          activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_TRACE                 TRUE

+

+/**

+ * @brief   Debug option, stack checks.

+ * @details If enabled then a runtime stack check is performed.

+ *

+ * @note    The default is @p FALSE.

+ * @note    The stack check is performed in a architecture/port dependent way.

+ *          It may not be implemented or some ports.

+ * @note    The default failure mode is to halt the system with the global

+ *          @p panic_msg variable set to @p NULL.

+ */

+#define CH_DBG_ENABLE_STACK_CHECK           TRUE

+

+/**

+ * @brief   Debug option, stacks initialization.

+ * @details If enabled then the threads working area is filled with a byte

+ *          value when a thread is created. This can be useful for the

+ *          runtime measurement of the used stack.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_FILL_THREADS                 TRUE

+

+/**

+ * @brief   Debug option, threads profiling.

+ * @details If enabled then a field is added to the @p thread_t structure that

+ *          counts the system ticks occurred while executing the thread.

+ *

+ * @note    The default is @p FALSE.

+ * @note    This debug option is not currently compatible with the

+ *          tickless mode.

+ */

+#define CH_DBG_THREADS_PROFILING            FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel hooks

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads descriptor structure extension.

+ * @details User fields added to the end of the @p thread_t structure.

+ */

+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

+  /* Add threads custom fields here.*/

+

+/**

+ * @brief   Threads initialization hook.

+ * @details User initialization code added to the @p chThdInit() API.

+ *

+ * @note    It is invoked from within @p chThdInit() and implicitly from all

+ *          the threads creation APIs.

+ */

+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

+  /* Add threads initialization code here.*/                                \

+}

+

+/**

+ * @brief   Threads finalization hook.

+ * @details User finalization code added to the @p chThdExit() API.

+ *

+ * @note    It is inserted into lock zone.

+ * @note    It is also invoked when the threads simply return in order to

+ *          terminate.

+ */

+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

+  /* Add threads finalization code here.*/                                  \

+}

+

+/**

+ * @brief   Context switch hook.

+ * @details This hook is invoked jus * @brief   ISR enter hook.

+ */

+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

+  /* IRQ prologue code here.*/                                              \

+}

+

+/**

+ * @brief   ISR exit hook.

+ */

+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

+  /* IRQ epilogue code here.*/                                              \

+}

+

+/**

+t before switching between threads.

+ */

+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

+  /* Context switch code here.*/                                            \

+}

+

+/**

+ * @brief   Idle thread enter hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to activate a power saving mode.

+ */

+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle thread leave hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to deactivate a power saving mode.

+ */

+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle Loop hook.

+ * @details This hook is continuously invoked by the idle thread loop.

+ */

+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

+  /* Idle loop code here.*/                                                 \

+}

+

+/**

+ * @brief   System tick event hook.

+ * @details This hook is invoked in the system tick handler immediately

+ *          after processing the virtual timers queue.

+ */

+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

+  /* System tick event code here.*/                                         \

+}

+

+/**

+ * @brief   System halt hook.

+ * @details This hook is invoked in case to a system halting error before

+ *          the system is halted.

+ */

+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

+  /* System halt code here.*/                                               \

+}

+

+/**

+ * @brief   Trace hook.

+ * @details This hook is invoked each time a new record is written in the

+ *          trace buffer.

+ */

+#define CH_CFG_TRACE_HOOK(tep) {                                            \

+  /* Trace code here.*/                                                     \

+}

+

+/** @} */

+

+/*===========================================================================*/

+/* Port-specific settings (override port settings defaulted in chcore.h).    */

+/*===========================================================================*/

+

+#endif  /* CHCONF_H */

+

+/** @} */

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h
new file mode 100644
index 0000000..cffae66
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h
@@ -0,0 +1,362 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/halconf.h

+ * @brief   HAL configuration header.

+ * @details HAL configuration file, this file allows to enable or disable the

+ *          various device drivers from your application. You may also use

+ *          this file in order to override the device drivers default settings.

+ *

+ * @addtogroup HAL_CONF

+ * @{

+ */

+

+#ifndef HALCONF_H

+#define HALCONF_H

+

+#include "mcuconf.h"

+

+/**

+ * @brief   Enables the PAL subsystem.

+ */

+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

+#define HAL_USE_PAL                 TRUE

+#endif

+

+/**

+ * @brief   Enables the ADC subsystem.

+ */

+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

+#define HAL_USE_ADC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the CAN subsystem.

+ */

+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

+#define HAL_USE_CAN                 FALSE

+#endif

+

+/**

+ * @brief   Enables the DAC subsystem.

+ */

+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

+#define HAL_USE_DAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the EXT subsystem.

+ */

+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

+#define HAL_USE_EXT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the GPT subsystem.

+ */

+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

+#define HAL_USE_GPT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the I2C subsystem.

+ */

+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

+#define HAL_USE_I2C                 FALSE

+#endif

+

+/**

+ * @brief   Enables the I2S subsystem.

+ */

+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

+#define HAL_USE_I2S                 FALSE

+#endif

+

+/**

+ * @brief   Enables the ICU subsystem.

+ */

+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

+#define HAL_USE_ICU                 FALSE

+#endif

+

+/**

+ * @brief   Enables the MAC subsystem.

+ */

+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

+#define HAL_USE_MAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the MMC_SPI subsystem.

+ */

+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_MMC_SPI             FALSE

+#endif

+

+/**

+ * @brief   Enables the PWM subsystem.

+ */

+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

+#define HAL_USE_PWM                 FALSE

+#endif

+

+/**

+ * @brief   Enables the RTC subsystem.

+ */

+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

+#define HAL_USE_RTC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SDC subsystem.

+ */

+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

+#define HAL_USE_SDC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SERIAL subsystem.

+ */

+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL              TRUE

+#endif

+

+/**

+ * @brief   Enables the SERIAL over USB subsystem.

+ */

+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL_USB          FALSE

+#endif

+

+/**

+ * @brief   Enables the SPI subsystem.

+ */

+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_SPI                 FALSE

+#endif

+

+/**

+ * @brief   Enables the UART subsystem.

+ */

+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

+#define HAL_USE_UART                FALSE

+#endif

+

+/**

+ * @brief   Enables the USB subsystem.

+ */

+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

+#define HAL_USE_USB                 FALSE

+#endif

+

+/**

+ * @brief   Enables the WDG subsystem.

+ */

+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

+#define HAL_USE_WDG                 FALSE

+#endif

+

+/*===========================================================================*/

+/* ADC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)

+#define ADC_USE_WAIT                TRUE

+#endif

+

+/**

+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define ADC_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+/*===========================================================================*/

+/* CAN driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Sleep mode related APIs inclusion switch.

+ */

+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)

+#define CAN_USE_SLEEP_MODE          TRUE

+#endif

+

+/*===========================================================================*/

+/* I2C driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables the mutual exclusion APIs on the I2C bus.

+ */

+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define I2C_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+/*===========================================================================*/

+/* MAC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables an event sources for incoming packets.

+ */

+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)

+#define MAC_USE_ZERO_COPY           FALSE

+#endif

+

+/**

+ * @brief   Enables an event sources for incoming packets.

+ */

+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)

+#define MAC_USE_EVENTS              TRUE

+#endif

+

+/*===========================================================================*/

+/* MMC_SPI driver related settings.                                          */

+/*===========================================================================*/

+

+/**

+ * @brief   Delays insertions.

+ * @details If enabled this options inserts delays into the MMC waiting

+ *          routines releasing some extra CPU time for the threads with

+ *          lower priority, this may slow down the driver a bit however.

+ *          This option is recommended also if the SPI driver does not

+ *          use a DMA channel and heavily loads the CPU.

+ */

+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)

+#define MMC_NICE_WAITING            TRUE

+#endif

+

+/*===========================================================================*/

+/* SDC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Number of initialization attempts before rejecting the card.

+ * @note    Attempts are performed at 10mS intervals.

+ */

+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)

+#define SDC_INIT_RETRY              100

+#endif

+

+/**

+ * @brief   Include support for MMC cards.

+ * @note    MMC support is not yet implemented so this option must be kept

+ *          at @p FALSE.

+ */

+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)

+#define SDC_MMC_SUPPORT             FALSE

+#endif

+

+/**

+ * @brief   Delays insertions.

+ * @details If enabled this options inserts delays into the MMC waiting

+ *          routines releasing some extra CPU time for the threads with

+ *          lower priority, this may slow down the driver a bit however.

+ */

+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)

+#define SDC_NICE_WAITING            TRUE

+#endif

+

+/*===========================================================================*/

+/* SERIAL driver related settings.                                           */

+/*===========================================================================*/

+

+/**

+ * @brief   Default bit rate.

+ * @details Configuration parameter, this is the baud rate selected for the

+ *          default configuration.

+ */

+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)

+#define SERIAL_DEFAULT_BITRATE      38400

+#endif

+

+/**

+ * @brief   Serial buffers size.

+ * @details Configuration parameter, you can change the depth of the queue

+ *          buffers depending on the requirements of your application.

+ * @note    The default is 64 bytes for both the transmission and receive

+ *          buffers.

+ */

+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

+#define SERIAL_BUFFERS_SIZE         16

+#endif

+

+/*===========================================================================*/

+/* SERIAL_USB driver related setting.                                        */

+/*===========================================================================*/

+

+/**

+ * @brief   Serial over USB buffers size.

+ * @details Configuration parameter, the buffer size must be a multiple of

+ *          the USB data endpoint maximum packet size.

+ * @note    The default is 256 bytes for both the transmission and receive

+ *          buffers.

+ */

+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)

+#define SERIAL_USB_BUFFERS_SIZE     64

+#endif

+

+/**

+ * @brief   Serial over USB number of buffers.

+ * @note    The default is 2 buffers.

+ */

+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)

+#define SERIAL_USB_BUFFERS_NUMBER   8

+#endif

+/** @} */

+

+/*===========================================================================*/

+/* SPI driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)

+#define SPI_USE_WAIT                TRUE

+#endif

+

+/**

+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define SPI_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+/*===========================================================================*/

+/* USB driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

+#define USB_USE_WAIT                FALSE

+#endif

+

+#endif /* HALCONF_H */

+

+/** @} */

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c
new file mode 100644
index 0000000..f789ad1
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c
@@ -0,0 +1,83 @@
+/*

+    Copyright (C) 2016 Jonathan Struebel

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+#include "hal.h"

+

+#include "shellcfg.h"

+

+SerialConfig s0cfg = {

+  115200

+};

+

+/*

+ * Blue LED blinker thread, times are in milliseconds.

+ */

+static THD_WORKING_AREA(waBlinkThread, 128);

+static THD_FUNCTION(BlinkThread, arg) {

+

+  (void)arg;

+

+  chRegSetThreadName("blinker");

+  while (true) {

+    systime_t time = 500;

+    palTogglePad(GPIO_LED_BLUE, PIN_LED_BLUE);

+    chThdSleepMilliseconds(time);

+  }

+}

+

+/*

+ * Application entry point.

+ */

+int main(void) {

+  /*

+   * System initializations.

+   * - HAL initialization, this also initializes the configured device drivers

+   *   and performs the board-specific initializations.

+   * - Kernel initialization, the main() function becomes a thread and the

+   *   RTOS is active.

+   */

+  halInit();

+  chSysInit();

+

+  /*

+   * Turn off the RGB LED.

+   */

+  palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */

+  palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */

+  palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */

+

+  sdStart(&SD1, &s0cfg);

+

+  /*

+   * Shell manager initialization.

+   */

+  shellInit();

+

+  /*

+   * Creates the blinker thread.

+   */

+  chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL);

+

+  while (true) {

+    if (SD1.state == SD_READY) {

+      thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE,

+                                              "shell", NORMALPRIO + 1,

+                                              shellThread, (void *)&shell_cfg);

+      chThdWait(shelltp);               /* Waiting termination.             */

+    }

+    palTogglePad(GPIO_LED_RED, PIN_LED_RED);

+    chThdSleepMilliseconds(1000);

+  }

+}

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h
new file mode 100644
index 0000000..8d5ef1c
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h
@@ -0,0 +1,58 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#ifndef MCUCONF_H

+#define MCUCONF_H

+

+#define KL2x_MCUCONF

+

+/*

+ * HAL driver system settings.

+ */

+#if 0

+/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */

+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE

+#define KINETIS_PLLCLK_FREQUENCY    96000000UL

+#define KINETIS_SYSCLK_FREQUENCY    48000000UL

+#endif

+

+#if 1

+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */

+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */

+#endif

+

+/*

+ * I2C driver system settings.

+ */

+#define KINETIS_I2C_USE_I2C0                  TRUE

+

+/*

+ * SERIAL driver system settings.

+ */

+#define KINETIS_SERIAL_USE_UART0              TRUE

+

+/*

+ * USB driver settings

+ */

+#define KINETIS_USB_USE_USB0                  TRUE

+/* need to redefine this, since the default is for K20x */

+#define KINETIS_USB_USB0_IRQ_PRIORITY         2

+

+#endif /* MCUCONF_H */

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c
new file mode 100644
index 0000000..253043d
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c
@@ -0,0 +1,72 @@
+/*

+    Copyright (C) 2016 Jonathan Struebel

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    common/shellcfg.c

+ * @brief   CLI shell config.

+ *

+ * @addtogroup SHELL

+ * @{

+ */

+#include <stdlib.h>

+

+#include "hal.h"

+#include "shell.h"

+#include "chprintf.h"

+

+char ** endptr;

+

+/*

+ * Shell history buffer

+ */

+char history_buffer[SHELL_MAX_HIST_BUFF];

+

+/*

+ * Shell completion buffer

+ */

+char *completion_buffer[SHELL_MAX_COMPLETIONS];

+

+/*

+ * Shell commands

+ */

+static void cmd_argt(BaseSequentialStream *chp, int argc, char *argv[]) {

+  size_t n;

+

+  if (argc > 1) {

+    chprintf(chp, "Usage: arg_test arg\r\n");

+    return;

+  }

+  n = strtol(argv[0], endptr, 0);

+  chprintf(chp, "Argument is: %u\r\n", n);

+}

+

+static const ShellCommand commands[] = {

+  {"arg_test", cmd_argt},

+  {NULL, NULL}

+};

+

+/*

+ * Shell configuration

+ */

+const ShellConfig shell_cfg = {

+  (BaseSequentialStream *)&SD1,

+  commands,

+  history_buffer,

+  sizeof(history_buffer),

+  completion_buffer

+};

+

+/** @} */

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h
new file mode 100644
index 0000000..cbb2e44
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h
@@ -0,0 +1,39 @@
+/*

+    Copyright (C) 2016 Jonathan Struebel

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    common/shellcfg.h

+ * @brief   CLI shell config header.

+ *

+ * @addtogroup SHELL

+ * @{

+ */

+

+#ifndef SHELLCFG_H

+#define SHELLCFG_H

+

+#include "shell.h"

+

+/*

+ * Shell Thread size

+ */

+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)

+

+extern ShellConfig shell_cfg;

+

+#endif  /* SHELLCFG_H */

+

+/** @} */

diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h
new file mode 100644
index 0000000..3568e3a
--- /dev/null
+++ b/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h
@@ -0,0 +1,139 @@
+/*

+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    shell.h

+ * @brief   Simple CLI shell header.

+ *

+ * @addtogroup SHELL

+ * @{

+ */

+

+#ifndef SHELLCONF_H

+#define SHELLCONF_H

+

+/**

+ * @brief   Shell maximum input line length.

+ */

+#if !defined(SHELL_MAX_LINE_LENGTH) || defined(__DOXYGEN__)

+#define SHELL_MAX_LINE_LENGTH       64

+#endif

+

+/**

+ * @brief   Shell maximum arguments per command.

+ */

+#if !defined(SHELL_MAX_ARGUMENTS) || defined(__DOXYGEN__)

+#define SHELL_MAX_ARGUMENTS         4

+#endif

+

+/**

+ * @brief   Shell maximum command history.

+ */

+#if !defined(SHELL_MAX_HIST_BUFF) || defined(__DOXYGEN__)

+#define SHELL_MAX_HIST_BUFF         8 * SHELL_MAX_LINE_LENGTH

+#endif

+

+/**

+ * @brief   Enable shell command history

+ */

+#if !defined(SHELL_USE_HISTORY) || defined(__DOXYGEN__)

+#define SHELL_USE_HISTORY           TRUE

+#endif

+

+/**

+ * @brief   Enable shell command completion

+ */

+#if !defined(SHELL_USE_COMPLETION) || defined(__DOXYGEN__)

+#define SHELL_USE_COMPLETION        TRUE

+#endif

+

+/**

+ * @brief   Shell Maximum Completions (Set to max commands with common prefix)

+ */

+#if !defined(SHELL_MAX_COMPLETIONS) || defined(__DOXYGEN__)

+#define SHELL_MAX_COMPLETIONS       8

+#endif

+

+/**

+ * @brief   Enable shell escape sequence processing

+ */

+#if !defined(SHELL_USE_ESC_SEQ) || defined(__DOXYGEN__)

+#define SHELL_USE_ESC_SEQ           TRUE

+#endif

+

+/*===========================================================================*/

+/* Shell command settings                                                    */

+/*===========================================================================*/

+

+/**

+ * @brief   Enable shell exit command

+ */

+#if !defined(SHELL_CMD_EXIT_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_EXIT_ENABLED              TRUE

+#endif

+

+/**

+ * @brief   Enable shell info command

+ */

+#if !defined(SHELL_CMD_INFO_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_INFO_ENABLED              TRUE

+#endif

+

+/**

+ * @brief   Enable shell echo command

+ */

+#if !defined(SHELL_CMD_ECHO_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_ECHO_ENABLED              TRUE

+#endif

+

+/**

+ * @brief   Enable shell systime command

+ */

+#if !defined(SHELL_CMD_SYSTIME_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_SYSTIME_ENABLED           TRUE

+#endif

+

+/**

+ * @brief   Enable shell mem command

+ */

+#if !defined(SHELL_CMD_MEM_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_MEM_ENABLED               TRUE

+#endif

+

+/**

+ * @brief   Enable shell threads command

+ */

+#if !defined(SHELL_CMD_THREADS_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_THREADS_ENABLED           TRUE

+#endif

+

+/**

+ * @brief   Enable shell test command

+ */

+#if !defined(SHELL_CMD_TEST_ENABLED) || defined(__DOXYGEN__)

+#define SHELL_CMD_TEST_ENABLED              TRUE

+#endif

+

+/**

+ * @brief   Define test thread working area

+ */

+#if !defined(SHELL_CMD_TEST_WA_SIZE) || defined(__DOXYGEN__)

+#define SHELL_CMD_TEST_WA_SIZE              THD_WORKING_AREA_SIZE(256)

+#endif

+

+#endif /* SHELLCONF_H */

+

+/** @} */