1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
|
Dom0 kernel and ramdisk modules
================================
Xen is passed the dom0 kernel and initrd via a reference in the /chosen
node of the device tree.
Each node has the form /chosen/modules/module@<N> and contains the following
properties:
- compatible
Must be:
"xen,<type>", "xen,multiboot-module"
where <type> must be one of:
- "linux-zimage" -- the dom0 kernel
- "linux-initrd" -- the dom0 ramdisk
- reg
Specifies the physical address of the module in RAM and the
length of the module.
- bootargs (optional)
Command line associated with this module. This is deprecated and should
be replaced by the bootargs variations described below.
Command lines
=============
Xen also checks for properties directly under /chosen to find suitable command
lines for Xen and Dom0. The logic is the following:
- If xen,xen-bootargs is present, it will be used for Xen.
- If xen,dom0-bootargs is present, it will be used for Dom0.
- If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is,
bootargs will be used for Xen.
- If no Xen specific properties are present, bootargs is for Dom0.
- If xen,xen-bootargs is present, but xen,dom0-bootargs is missing,
bootargs will be used for Dom0.
Most of these cases is to make booting with Xen-unaware bootloaders easier.
For those you would hardcode the Xen commandline in the DTB under
/chosen/xen,xen-bootargs and would let the bootloader set the Dom0 command
line by writing bootargs (as for native Linux).
A Xen-aware bootloader would set xen,xen-bootargs for Xen, xen,dom0-bootargs
for Dom0 and bootargs for native Linux.
|