diff options
Diffstat (limited to 'xenolinux-2.4.26-sparse/arch/xen/config.in')
| -rw-r--r-- | xenolinux-2.4.26-sparse/arch/xen/config.in | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/xenolinux-2.4.26-sparse/arch/xen/config.in b/xenolinux-2.4.26-sparse/arch/xen/config.in new file mode 100644 index 0000000000..c66383f643 --- /dev/null +++ b/xenolinux-2.4.26-sparse/arch/xen/config.in @@ -0,0 +1,311 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. +# +mainmenu_name "Linux Kernel Configuration" + +define_bool CONFIG_XEN y + +define_bool CONFIG_X86 y +define_bool CONFIG_ISA y +define_bool CONFIG_SBUS n + +define_bool CONFIG_UID16 y + +mainmenu_option next_comment +comment 'Xen' +bool 'Support for privileged operations (domain 0)' CONFIG_XEN_PRIVILEGED_GUEST +bool 'Support for direct physical device access' CONFIG_XEN_PHYSDEV_ACCESS +endmenu +# The IBM S/390 patch needs this. +define_bool CONFIG_NO_IDLE_HZ y + +mainmenu_option next_comment +comment 'Code maturity level options' +bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL +endmenu + +mainmenu_option next_comment +comment 'Loadable module support' +bool 'Enable loadable module support' CONFIG_MODULES +if [ "$CONFIG_MODULES" = "y" ]; then + bool ' Set version information on all module symbols' CONFIG_MODVERSIONS + bool ' Kernel module loader' CONFIG_KMOD +fi +endmenu + +mainmenu_option next_comment +comment 'Processor type and features' +choice 'Processor family' \ + "Pentium-Pro/Celeron/Pentium-II CONFIG_M686 \ + Pentium-III/Celeron(Coppermine) CONFIG_MPENTIUMIII \ + Pentium-4 CONFIG_MPENTIUM4 \ + Athlon/Duron/K7 CONFIG_MK7 \ + Opteron/Athlon64/Hammer/K8 CONFIG_MK8 \ + VIA-C3-2 CONFIG_MVIAC3_2" Pentium-Pro + + define_bool CONFIG_X86_WP_WORKS_OK y + define_bool CONFIG_X86_INVLPG y + define_bool CONFIG_X86_CMPXCHG y + define_bool CONFIG_X86_XADD y + define_bool CONFIG_X86_BSWAP y + define_bool CONFIG_X86_POPAD_OK y + define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n + define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y + + define_bool CONFIG_X86_GOOD_APIC y + define_bool CONFIG_X86_PGE y + define_bool CONFIG_X86_USE_PPRO_CHECKSUM y + define_bool CONFIG_X86_TSC y + +if [ "$CONFIG_M686" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 5 +fi +if [ "$CONFIG_MPENTIUMIII" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 5 +fi +if [ "$CONFIG_MPENTIUM4" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 7 +fi +if [ "$CONFIG_MK8" = "y" ]; then + define_bool CONFIG_MK7 y +fi +if [ "$CONFIG_MK7" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 6 + define_bool CONFIG_X86_USE_3DNOW y +fi +if [ "$CONFIG_MVIAC3_2" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 5 +fi + +#if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then +# tristate 'BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)' CONFIG_EDD +#fi + +choice 'High Memory Support' \ + "off CONFIG_NOHIGHMEM \ + 4GB CONFIG_HIGHMEM4G" off +# 64GB CONFIG_HIGHMEM64G" off +if [ "$CONFIG_HIGHMEM4G" = "y" ]; then + define_bool CONFIG_HIGHMEM y +fi +if [ "$CONFIG_HIGHMEM64G" = "y" ]; then + define_bool CONFIG_HIGHMEM y + define_bool CONFIG_X86_PAE y +fi + +if [ "$CONFIG_HIGHMEM" = "y" ]; then + bool 'HIGHMEM I/O support' CONFIG_HIGHIO +fi + +#bool 'Symmetric multi-processing support' CONFIG_SMP +#if [ "$CONFIG_SMP" = "y" -a "$CONFIG_X86_CMPXCHG" = "y" ]; then +# define_bool CONFIG_HAVE_DEC_LOCK y +#fi +endmenu + +mainmenu_option next_comment +comment 'General setup' + +bool 'Networking support' CONFIG_NET + +if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then + bool 'PCI support' CONFIG_PCI + source drivers/pci/Config.in + + bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG + + if [ "$CONFIG_HOTPLUG" = "y" ] ; then + source drivers/pcmcia/Config.in + source drivers/hotplug/Config.in + else + define_bool CONFIG_PCMCIA n + define_bool CONFIG_HOTPLUG_PCI n + fi +fi + +bool 'System V IPC' CONFIG_SYSVIPC +bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT +bool 'Sysctl support' CONFIG_SYSCTL +if [ "$CONFIG_PROC_FS" = "y" ]; then + choice 'Kernel core (/proc/kcore) format' \ + "ELF CONFIG_KCORE_ELF \ + A.OUT CONFIG_KCORE_AOUT" ELF +fi +tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT +tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF +tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC +bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER + +endmenu + +if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then + source drivers/mtd/Config.in + + source drivers/parport/Config.in + + source drivers/pnp/Config.in + + source drivers/block/Config.in + + source drivers/md/Config.in +fi + +if [ "$CONFIG_NET" = "y" ]; then + source net/Config.in +fi + +if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "n" ]; then + # + # Block device driver configuration + # + mainmenu_option next_comment + comment 'Block devices' + tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP + dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET + tristate 'RAM disk support' CONFIG_BLK_DEV_RAM + if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then + int ' Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096 + fi + dep_bool ' Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD $CONFIG_BLK_DEV_RAM + bool 'Per partition statistics in /proc/partitions' CONFIG_BLK_STATS + bool 'XenoLinux virtual block device support' CONFIG_XEN_VBD + define_bool CONFIG_BLK_DEV_HD n + endmenu +else + mainmenu_option next_comment + comment 'ATA/IDE/MFM/RLL support' + + tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE + + if [ "$CONFIG_IDE" != "n" ]; then + source drivers/ide/Config.in + else + define_bool CONFIG_BLK_DEV_HD n + fi + endmenu + + mainmenu_option next_comment + comment 'SCSI support' + + tristate 'SCSI support' CONFIG_SCSI + + if [ "$CONFIG_SCSI" != "n" ]; then + source drivers/scsi/Config.in + fi + endmenu + + source drivers/message/fusion/Config.in + + source drivers/ieee1394/Config.in + + source drivers/message/i2o/Config.in + + if [ "$CONFIG_NET" = "y" ]; then + mainmenu_option next_comment + comment 'Network device support' + + bool 'Network device support' CONFIG_NETDEVICES + if [ "$CONFIG_NETDEVICES" = "y" ]; then + source drivers/net/Config.in + if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then + source drivers/atm/Config.in + fi + fi + endmenu + fi + + source net/ax25/Config.in + + source net/irda/Config.in + + mainmenu_option next_comment + comment 'ISDN subsystem' + if [ "$CONFIG_NET" != "n" ]; then + tristate 'ISDN support' CONFIG_ISDN + if [ "$CONFIG_ISDN" != "n" ]; then + source drivers/isdn/Config.in + fi + fi + endmenu + + if [ "$CONFIG_ISA" = "y" ]; then + mainmenu_option next_comment + comment 'Old CD-ROM drivers (not SCSI, not IDE)' + + bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI + if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then + source drivers/cdrom/Config.in + fi + endmenu + fi + + # + # input before char - char/joystick depends on it. As does USB. + # + source drivers/input/Config.in +fi + +source drivers/char/Config.in + +if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then + source drivers/media/Config.in +fi + +source fs/Config.in + +mainmenu_option next_comment +comment 'Console drivers' + +bool 'Xen console support' CONFIG_XEN_CONSOLE + +if [ "$CONFIG_VT" = "y" ]; then + bool 'VGA text console' CONFIG_VGA_CONSOLE + bool 'Dummy console' CONFIG_DUMMY_CONSOLE + if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then + bool 'Video mode selection support' CONFIG_VIDEO_SELECT + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE + source drivers/video/Config.in + fi + fi +fi +endmenu + +if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then + mainmenu_option next_comment + comment 'Sound' + + tristate 'Sound card support' CONFIG_SOUND + if [ "$CONFIG_SOUND" != "n" ]; then + source drivers/sound/Config.in + fi + endmenu + + source drivers/usb/Config.in + + source net/bluetooth/Config.in +fi + +mainmenu_option next_comment +comment 'Kernel hacking' + +bool 'Kernel debugging' CONFIG_DEBUG_KERNEL +if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then + bool ' Check for stack overflows' CONFIG_DEBUG_STACKOVERFLOW + bool ' Debug high memory support' CONFIG_DEBUG_HIGHMEM + bool ' Debug memory allocations' CONFIG_DEBUG_SLAB + bool ' Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT + bool ' Magic SysRq key' CONFIG_MAGIC_SYSRQ + bool ' Spinlock debugging' CONFIG_DEBUG_SPINLOCK + bool ' Verbose BUG() reporting (adds 70K)' CONFIG_DEBUG_BUGVERBOSE + bool ' Load all symbols for debugging' CONFIG_KALLSYMS + bool ' Compile the kernel with frame pointers' CONFIG_FRAME_POINTER +fi + +int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0 + +endmenu + +source crypto/Config.in +source lib/Config.in |