diff options
Diffstat (limited to 'xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in')
| -rw-r--r-- | xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in | 361 |
1 files changed, 0 insertions, 361 deletions
diff --git a/xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in b/xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in deleted file mode 100644 index 217398d6e2..0000000000 --- a/xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in +++ /dev/null @@ -1,361 +0,0 @@ -# -# Character device configuration -# -mainmenu_option next_comment -comment 'Character devices' - -bool 'Xen console support' CONFIG_XEN_CONSOLE -comment 'The options below are alpha-stage and will probably not work' -bool 'Virtual terminal' CONFIG_VT -if [ "$CONFIG_VT" = "y" ]; then - bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE - bool ' Support for VGA Video' CONFIG_VGA_CONSOLE - bool ' Support for Dummy Video (for testing)' CONFIG_DUMMY_CONSOLE - bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE -fi - -bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS -if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then - int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256 -fi - - -endmenu - -# KEPT IN CASE WE WANT TO BRING SOME BACK... -# -#if [ "$CONFIG_VT" = "y" ]; then -# bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE -# if [ "$CONFIG_GSC_LASI" = "y" ]; then -# bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2 -# fi -#fi -# -#tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL -#if [ "$CONFIG_SERIAL" = "y" ]; then -# bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE -# if [ "$CONFIG_GSC_LASI" = "y" ]; then -# bool ' serial port on GSC support' CONFIG_SERIAL_GSC -# fi -# if [ "$CONFIG_IA64" = "y" ]; then -# bool 'Support for serial console port described by EFI HCDP table' CONFIG_SERIAL_HCDP -# fi -# if [ "$CONFIG_ARCH_ACORN" = "y" ]; then -# tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL -# tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL -# fi -#fi -#dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL -#if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then -# bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS -# bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ -# bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ -# bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT -# bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6 -#fi -#bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD -#if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then -# tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE -# tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT -# tristate ' Cyclades async mux support' CONFIG_CYCLADES -# if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then -# bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR -# fi -# if [ "$CONFIG_X86_64" != "y" ]; then -# tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA -# if [ "$CONFIG_DIGIEPCA" = "n" ]; then -# tristate ' Digiboard PC/Xx Support' CONFIG_DIGI -# fi -# fi -# dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA -# tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO -# tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO -# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then -# dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m -# fi -# tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK -# tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP -# tristate ' HDLC line discipline support' CONFIG_N_HDLC -# tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8 -# if [ "$CONFIG_X86_64" != "y" ]; then -# tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX -# if [ "$CONFIG_SPECIALIX" != "n" ]; then -# bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS -# fi -# tristate ' Specialix SX (and SI) card support' CONFIG_SX -# tristate ' Specialix RIO system support' CONFIG_RIO -# if [ "$CONFIG_RIO" != "n" ]; then -# bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI -# fi -# fi -# bool ' Stallion multiport serial support' CONFIG_STALDRV -# if [ "$CONFIG_STALDRV" = "y" ]; then -# tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION -# tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION -# fi -# if [ "$CONFIG_PARISC" = "y" ]; then -# if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then -# bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD -# fi -# if [ "$CONFIG_SERIAL_MUX" != "y" ]; then -# bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD -# fi -# fi -# if [ "$CONFIG_MIPS" = "y" ]; then -# bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912 -# dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912 -# bool ' Enable Au1000 UART Support' CONFIG_AU1000_UART -# if [ "$CONFIG_AU1000_UART" = "y" ]; then -# bool ' Enable Au1000 serial console' CONFIG_AU1000_SERIAL_CONSOLE -# fi -# bool 'TXx927 SIO support' CONFIG_TXX927_SERIAL -# if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then -# bool 'TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE -# fi -# if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then -# bool ' Support for sb1250 onchip DUART' CONFIG_SIBYTE_SB1250_DUART -# if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then -# bool ' Console on SB1250 DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE -# if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then -# define_bool CONFIG_SERIAL_CONSOLE y -# fi -# int ' Output buffers size (in bytes)' CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE 1024 -# bool ' Leave port 1 alone (for kgdb or audio)' CONFIG_SIBYTE_SB1250_DUART_NO_PORT_1 -# fi -# fi -# fi -#fi -#if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then -# tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 -#fi -#if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then -# bool 'DC21285 serial port support' CONFIG_SERIAL_21285 -# if [ "$CONFIG_SERIAL_21285" = "y" ]; then -# if [ "$CONFIG_OBSOLETE" = "y" ]; then -# bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD -# fi -# bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE -# fi -# if [ "$CONFIG_MIPS" = "y" ]; then -# bool ' TMPTX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912 -# dep_bool ' Console on TMPTX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912 -# bool ' Enable Au1000 UART Support' CONFIG_AU1000_UART -# if [ "$CONFIG_AU1000_UART" = "y" ]; then -# bool ' Enable Au1000 serial console' CONFIG_AU1000_SERIAL_CONSOLE -# fi -# fi -# if [ "$CONFIG_PARISC" = "y" ]; then -# bool ' PDC software console support' CONFIG_PDC_CONSOLE -# fi -#fi -#if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then -# bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD -# if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then -# define_bool CONFIG_IT8172_CIR y -# else -# bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB -# fi -# bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 -# bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1 -#fi -#if [ "$CONFIG_MIPS_IVR" = "y" ]; then -# bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD -# if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then -# define_bool CONFIG_IT8172_CIR y -# fi -# bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 -#fi -##PTYS WERE HERE -#if [ "$CONFIG_PARPORT" != "n" ]; then -# dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT -# if [ "$CONFIG_PRINTER" != "n" ]; then -# bool ' Support for console on line printer' CONFIG_LP_CONSOLE -# fi -# dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT -# dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT -#fi -# -#if [ "$CONFIG_PPC64" ] ; then -# bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE -#fi -# -#source drivers/i2c/Config.in -# -#mainmenu_option next_comment -#comment 'Mice' -#tristate 'Bus Mouse Support' CONFIG_BUSMOUSE -#if [ "$CONFIG_BUSMOUSE" != "n" ]; then -# dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE -# dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE -# dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE -# if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then -# dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE -# fi -#fi -# -#tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE -#if [ "$CONFIG_MOUSE" != "n" ]; then -# bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE -# tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE -# tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD -# tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE -#fi -#endmenu -# -#source drivers/char/joystick/Config.in -# -#tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE -#if [ "$CONFIG_QIC02_TAPE" != "n" ]; then -# bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF -# if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then -# comment ' Edit configuration parameters in ./include/linux/tpqic02.h!' -# else -# comment ' Setting runtime QIC-02 configuration is done with qic02conf' -# comment ' from the tpqic02-support package. It is available at' -# comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/' -# fi -#fi -# -#tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER -#dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER -#dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER -#dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER -#dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER -# -#mainmenu_option next_comment -#comment 'Watchdog Cards' -#bool 'Watchdog Timer Support' CONFIG_WATCHDOG -#if [ "$CONFIG_WATCHDOG" != "n" ]; then -# bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT -# tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT -# tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT -# tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT -# tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT -# tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG -# if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then -# tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG -# if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then -# tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG -# fi -# fi -# tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT -# tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT -# tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT -# if [ "$CONFIG_SGI_IP22" = "y" ]; then -# dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 -# fi -# tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO -# tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD -# tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT -# dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL -# tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT -# tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG -# tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT -# tristate ' WDT Watchdog timer' CONFIG_WDT -# tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI -# if [ "$CONFIG_WDT" != "n" ]; then -# bool ' WDT501 features' CONFIG_WDT_501 -# if [ "$CONFIG_WDT_501" = "y" ]; then -# bool ' Fan Tachometer' CONFIG_WDT_501_FAN -# fi -# fi -# tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT -# dep_tristate ' AMD 766/768 TCO Timer/Watchdog' CONFIG_AMD7XX_TCO $CONFIG_EXPERIMENTAL -#fi -#endmenu -# -#if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then -# tristate 'NetWinder thermometer support' CONFIG_DS1620 -# tristate 'NetWinder Button' CONFIG_NWBUTTON -# if [ "$CONFIG_NWBUTTON" != "n" ]; then -# bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT -# fi -# tristate 'NetWinder flash support' CONFIG_NWFLASH -#fi -#dep_tristate 'NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200 -# -#if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then -# dep_tristate 'AMD 768 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI -#fi -#if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then -# dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI -#fi -#dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI -#tristate '/dev/nvram support' CONFIG_NVRAM -#tristate 'Enhanced Real Time Clock Support' CONFIG_RTC -#if [ "$CONFIG_IA64" = "y" ]; then -# bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC -#fi -#if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then -# bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8 -#fi -# -#tristate 'Double Talk PC internal speech card support' CONFIG_DTLK -#tristate 'Siemens R3964 line discipline' CONFIG_R3964 -#tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM -#if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then -# dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI -#fi -# -#mainmenu_option next_comment -#comment 'Ftape, the floppy tape device driver' -#tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE -#if [ "$CONFIG_FTAPE" != "n" ]; then -# source drivers/char/ftape/Config.in -#fi -#endmenu -# -#if [ "$CONFIG_GART_IOMMU" = "y" ]; then -# bool '/dev/agpgart (AGP Support)' CONFIG_AGP -# define_bool CONFIG_AGP_AMD_8151 y -#else -# tristate '/dev/agpgart (AGP Support)' CONFIG_AGP -#fi -#if [ "$CONFIG_AGP" != "n" ]; then -# bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL -# bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810 -# bool ' VIA chipset support' CONFIG_AGP_VIA -# bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD -# if [ "$CONFIG_GART_IOMMU" != "y" ]; then -# bool ' AMD 8151 support' CONFIG_AGP_AMD_8151 -# fi -# bool ' Generic SiS support' CONFIG_AGP_SIS -# bool ' ALI chipset support' CONFIG_AGP_ALI -# bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS -# if [ "$CONFIG_IA64" = "y" ]; then -# bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1 -# fi -#fi -# -#bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM -#if [ "$CONFIG_DRM" = "y" ]; then -# bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD -# if [ "$CONFIG_DRM_OLD" = "y" ]; then -# comment 'DRM 4.0 drivers' -# source drivers/char/drm-4.0/Config.in -# else -# comment 'DRM 4.1 drivers' -# define_bool CONFIG_DRM_NEW y -# source drivers/char/drm/Config.in -# fi -#fi -# -#if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then -# source drivers/char/pcmcia/Config.in -#fi -#if [ "$CONFIG_MIPS_AU1000" = "y" ]; then -# tristate ' Alchemy Au1000 GPIO device support' CONFIG_AU1000_GPIO -# tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1000_ADS7846 -#fi -#if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then -# tristate ' ITE GPIO' CONFIG_ITE_GPIO -#fi -# -#if [ "$CONFIG_X86" = "y" ]; then -# tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE -#fi - - - - - |