diff options
Diffstat (limited to 'xen-2.4.16/drivers/ide/ide_modes.h')
| -rw-r--r-- | xen-2.4.16/drivers/ide/ide_modes.h | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/xen-2.4.16/drivers/ide/ide_modes.h b/xen-2.4.16/drivers/ide/ide_modes.h new file mode 100644 index 0000000000..16b8cf123a --- /dev/null +++ b/xen-2.4.16/drivers/ide/ide_modes.h @@ -0,0 +1,236 @@ +/* + * linux/drivers/ide/ide_modes.h + * + * Copyright (C) 1996 Linus Torvalds, Igor Abramov, and Mark Lord + */ + +#ifndef _IDE_MODES_H +#define _IDE_MODES_H + +#include <linux/config.h> + +/* + * Shared data/functions for determining best PIO mode for an IDE drive. + * Most of this stuff originally lived in cmd640.c, and changes to the + * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid + * breaking the fragile cmd640.c support. + */ + +#ifdef CONFIG_BLK_DEV_IDE_MODES + +/* + * Standard (generic) timings for PIO modes, from ATA2 specification. + * These timings are for access to the IDE data port register *only*. + * Some drives may specify a mode, while also specifying a different + * value for cycle_time (from drive identification data). + */ +typedef struct ide_pio_timings_s { + int setup_time; /* Address setup (ns) minimum */ + int active_time; /* Active pulse (ns) minimum */ + int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */ +} ide_pio_timings_t; + +typedef struct ide_pio_data_s { + byte pio_mode; + byte use_iordy; + byte overridden; + byte blacklisted; + unsigned int cycle_time; +} ide_pio_data_t; + +#ifndef _IDE_C + +int ide_scan_pio_blacklist (char *model); +byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d); +extern const ide_pio_timings_t ide_pio_timings[6]; + +#else /* _IDE_C */ + +const ide_pio_timings_t ide_pio_timings[6] = { + { 70, 165, 600 }, /* PIO Mode 0 */ + { 50, 125, 383 }, /* PIO Mode 1 */ + { 30, 100, 240 }, /* PIO Mode 2 */ + { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ + { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ + { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ +}; + +/* + * Black list. Some drives incorrectly report their maximal PIO mode, + * at least in respect to CMD640. Here we keep info on some known drives. + */ +static struct ide_pio_info { + const char *name; + int pio; +} ide_pio_blacklist [] = { +/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */ + { "Conner Peripherals 540MB - CFS540A", 3 }, + + { "WDC AC2700", 3 }, + { "WDC AC2540", 3 }, + { "WDC AC2420", 3 }, + { "WDC AC2340", 3 }, + { "WDC AC2250", 0 }, + { "WDC AC2200", 0 }, + { "WDC AC21200", 4 }, + { "WDC AC2120", 0 }, + { "WDC AC2850", 3 }, + { "WDC AC1270", 3 }, + { "WDC AC1170", 1 }, + { "WDC AC1210", 1 }, + { "WDC AC280", 0 }, +/* { "WDC AC21000", 4 }, */ + { "WDC AC31000", 3 }, + { "WDC AC31200", 3 }, +/* { "WDC AC31600", 4 }, */ + + { "Maxtor 7131 AT", 1 }, + { "Maxtor 7171 AT", 1 }, + { "Maxtor 7213 AT", 1 }, + { "Maxtor 7245 AT", 1 }, + { "Maxtor 7345 AT", 1 }, + { "Maxtor 7546 AT", 3 }, + { "Maxtor 7540 AV", 3 }, + + { "SAMSUNG SHD-3121A", 1 }, + { "SAMSUNG SHD-3122A", 1 }, + { "SAMSUNG SHD-3172A", 1 }, + +/* { "ST51080A", 4 }, + * { "ST51270A", 4 }, + * { "ST31220A", 4 }, + * { "ST31640A", 4 }, + * { "ST32140A", 4 }, + * { "ST3780A", 4 }, + */ + { "ST5660A", 3 }, + { "ST3660A", 3 }, + { "ST3630A", 3 }, + { "ST3655A", 3 }, + { "ST3391A", 3 }, + { "ST3390A", 1 }, + { "ST3600A", 1 }, + { "ST3290A", 0 }, + { "ST3144A", 0 }, + { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */ + /* drive) according to Seagates FIND-ATA program */ + + { "QUANTUM ELS127A", 0 }, + { "QUANTUM ELS170A", 0 }, + { "QUANTUM LPS240A", 0 }, + { "QUANTUM LPS210A", 3 }, + { "QUANTUM LPS270A", 3 }, + { "QUANTUM LPS365A", 3 }, + { "QUANTUM LPS540A", 3 }, + { "QUANTUM LIGHTNING 540A", 3 }, + { "QUANTUM LIGHTNING 730A", 3 }, + + { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ + { "QUANTUM FIREBALL_640", 3 }, + { "QUANTUM FIREBALL_1080", 3 }, + { "QUANTUM FIREBALL_1280", 3 }, + { NULL, 0 } +}; + +/* + * This routine searches the ide_pio_blacklist for an entry + * matching the start/whole of the supplied model name. + * + * Returns -1 if no match found. + * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. + */ +int ide_scan_pio_blacklist (char *model) +{ + struct ide_pio_info *p; + + for (p = ide_pio_blacklist; p->name != NULL; p++) { + if (strncmp(p->name, model, strlen(p->name)) == 0) + return p->pio; + } + return -1; +} + +/* + * This routine returns the recommended PIO settings for a given drive, + * based on the drive->id information and the ide_pio_blacklist[]. + * This is used by most chipset support modules when "auto-tuning". + */ + +/* + * Drive PIO mode auto selection + */ +byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d) +{ + int pio_mode; + int cycle_time = 0; + int use_iordy = 0; + struct hd_driveid* id = drive->id; + int overridden = 0; + int blacklisted = 0; + + if (mode_wanted != 255) { + pio_mode = mode_wanted; + } else if (!drive->id) { + pio_mode = 0; + } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) { + overridden = 1; + blacklisted = 1; + use_iordy = (pio_mode > 2); + } else { + pio_mode = id->tPIO; + if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ + pio_mode = 2; + overridden = 1; + } + if (id->field_valid & 2) { /* drive implements ATA2? */ + if (id->capability & 8) { /* drive supports use_iordy? */ + use_iordy = 1; + cycle_time = id->eide_pio_iordy; + if (id->eide_pio_modes & 7) { + overridden = 0; + if (id->eide_pio_modes & 4) + pio_mode = 5; + else if (id->eide_pio_modes & 2) + pio_mode = 4; + else + pio_mode = 3; + } + } else { + cycle_time = id->eide_pio; + } + } + +#if 0 + if (drive->id->major_rev_num & 0x0004) printk("ATA-2 "); +#endif + + /* + * Conservative "downgrade" for all pre-ATA2 drives + */ + if (pio_mode && pio_mode < 4) { + pio_mode--; + overridden = 1; +#if 0 + use_iordy = (pio_mode > 2); +#endif + if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time) + cycle_time = 0; /* use standard timing */ + } + } + if (pio_mode > max_mode) { + pio_mode = max_mode; + cycle_time = 0; + } + if (d) { + d->pio_mode = pio_mode; + d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time; + d->use_iordy = use_iordy; + d->overridden = overridden; + d->blacklisted = blacklisted; + } + return pio_mode; +} + +#endif /* _IDE_C */ +#endif /* CONFIG_BLK_DEV_IDE_MODES */ +#endif /* _IDE_MODES_H */ |