diff options
Diffstat (limited to 'linux-2.4-xen-sparse/arch/xen/config.in')
| -rw-r--r-- | linux-2.4-xen-sparse/arch/xen/config.in | 327 |
1 files changed, 0 insertions, 327 deletions
diff --git a/linux-2.4-xen-sparse/arch/xen/config.in b/linux-2.4-xen-sparse/arch/xen/config.in deleted file mode 100644 index a8784a07a5..0000000000 --- a/linux-2.4-xen-sparse/arch/xen/config.in +++ /dev/null @@ -1,327 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. -# -mainmenu_name "Linux Kernel Configuration" - -define_bool CONFIG_XEN y - -define_bool CONFIG_X86 y -define_bool CONFIG_ISA y -define_bool CONFIG_SBUS n - -define_bool CONFIG_UID16 y - -mainmenu_option next_comment -comment 'Xen' -bool 'Support for privileged operations (domain 0)' CONFIG_XEN_PRIVILEGED_GUEST -bool 'Device-driver domain (physical device access)' CONFIG_XEN_PHYSDEV_ACCESS -bool 'Scrub memory before freeing it to Xen' CONFIG_XEN_SCRUB_PAGES -bool 'Network-device frontend driver' CONFIG_XEN_NETDEV_FRONTEND -bool 'Block-device frontend driver' CONFIG_XEN_BLKDEV_FRONTEND -bool 'Block-device uses grant tables' CONFIG_XEN_BLKDEV_GRANT -endmenu -# The IBM S/390 patch needs this. -define_bool CONFIG_NO_IDLE_HZ y - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - define_bool CONFIG_FOREIGN_PAGES y -else - define_bool CONFIG_FOREIGN_PAGES n - define_bool CONFIG_NETDEVICES y - define_bool CONFIG_VT n -fi - -mainmenu_option next_comment -comment 'Code maturity level options' -bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL -endmenu - -mainmenu_option next_comment -comment 'Loadable module support' -bool 'Enable loadable module support' CONFIG_MODULES -if [ "$CONFIG_MODULES" = "y" ]; then - bool ' Set version information on all module symbols' CONFIG_MODVERSIONS - bool ' Kernel module loader' CONFIG_KMOD -fi -endmenu - -mainmenu_option next_comment -comment 'Processor type and features' -choice 'Processor family' \ - "Pentium-Pro/Celeron/Pentium-II CONFIG_M686 \ - Pentium-III/Celeron(Coppermine) CONFIG_MPENTIUMIII \ - Pentium-4 CONFIG_MPENTIUM4 \ - Athlon/Duron/K7 CONFIG_MK7 \ - Opteron/Athlon64/Hammer/K8 CONFIG_MK8 \ - VIA-C3-2 CONFIG_MVIAC3_2" Pentium-Pro - - define_bool CONFIG_X86_WP_WORKS_OK y - define_bool CONFIG_X86_INVLPG y - define_bool CONFIG_X86_CMPXCHG y - define_bool CONFIG_X86_XADD y - define_bool CONFIG_X86_BSWAP y - define_bool CONFIG_X86_POPAD_OK y - define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n - define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y - - define_bool CONFIG_X86_GOOD_APIC y - define_bool CONFIG_X86_PGE y - define_bool CONFIG_X86_USE_PPRO_CHECKSUM y - define_bool CONFIG_X86_TSC y - -if [ "$CONFIG_M686" = "y" ]; then - define_int CONFIG_X86_L1_CACHE_SHIFT 5 -fi -if [ "$CONFIG_MPENTIUMIII" = "y" ]; then - define_int CONFIG_X86_L1_CACHE_SHIFT 5 -fi -if [ "$CONFIG_MPENTIUM4" = "y" ]; then - define_int CONFIG_X86_L1_CACHE_SHIFT 7 -fi -if [ "$CONFIG_MK8" = "y" ]; then - define_bool CONFIG_MK7 y -fi -if [ "$CONFIG_MK7" = "y" ]; then - define_int CONFIG_X86_L1_CACHE_SHIFT 6 - define_bool CONFIG_X86_USE_3DNOW y -fi -if [ "$CONFIG_MVIAC3_2" = "y" ]; then - define_int CONFIG_X86_L1_CACHE_SHIFT 5 -fi - -#if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then -# tristate 'BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)' CONFIG_EDD -#fi - -choice 'High Memory Support' \ - "off CONFIG_NOHIGHMEM \ - 4GB CONFIG_HIGHMEM4G" off -# 64GB CONFIG_HIGHMEM64G" off -if [ "$CONFIG_HIGHMEM4G" = "y" ]; then - define_bool CONFIG_HIGHMEM y -fi -if [ "$CONFIG_HIGHMEM64G" = "y" ]; then - define_bool CONFIG_HIGHMEM y - define_bool CONFIG_X86_PAE y -fi - -if [ "$CONFIG_HIGHMEM" = "y" ]; then - bool 'HIGHMEM I/O support' CONFIG_HIGHIO -fi - -define_int CONFIG_FORCE_MAX_ZONEORDER 11 - -#bool 'Symmetric multi-processing support' CONFIG_SMP -#if [ "$CONFIG_SMP" = "y" -a "$CONFIG_X86_CMPXCHG" = "y" ]; then -# define_bool CONFIG_HAVE_DEC_LOCK y -#fi -endmenu - -mainmenu_option next_comment -comment 'General setup' - -bool 'Networking support' CONFIG_NET - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - bool 'PCI support' CONFIG_PCI - source drivers/pci/Config.in - - bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG - - if [ "$CONFIG_HOTPLUG" = "y" ] ; then - source drivers/pcmcia/Config.in - source drivers/hotplug/Config.in - else - define_bool CONFIG_PCMCIA n - define_bool CONFIG_HOTPLUG_PCI n - fi -fi - -bool 'System V IPC' CONFIG_SYSVIPC -bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT -bool 'Sysctl support' CONFIG_SYSCTL -if [ "$CONFIG_PROC_FS" = "y" ]; then - choice 'Kernel core (/proc/kcore) format' \ - "ELF CONFIG_KCORE_ELF \ - A.OUT CONFIG_KCORE_AOUT" ELF -fi -tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT -bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF -tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC -bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER - -endmenu - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - source drivers/mtd/Config.in - - source drivers/parport/Config.in - - source drivers/pnp/Config.in - - source drivers/block/Config.in - - source drivers/md/Config.in -fi - -if [ "$CONFIG_NET" = "y" ]; then - source net/Config.in -fi - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - mainmenu_option next_comment - comment 'ATA/IDE/MFM/RLL support' - - tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE - - if [ "$CONFIG_IDE" != "n" ]; then - source drivers/ide/Config.in - else - define_bool CONFIG_BLK_DEV_HD n - fi - endmenu -fi - -mainmenu_option next_comment -comment 'SCSI support' - -tristate 'SCSI support' CONFIG_SCSI - -if [ "$CONFIG_SCSI" != "n" ]; then - source drivers/scsi/Config.in -fi -endmenu - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - source drivers/message/fusion/Config.in - - source drivers/ieee1394/Config.in - - source drivers/message/i2o/Config.in - - if [ "$CONFIG_NET" = "y" ]; then - mainmenu_option next_comment - comment 'Network device support' - - bool 'Network device support' CONFIG_NETDEVICES - if [ "$CONFIG_NETDEVICES" = "y" ]; then - source drivers/net/Config.in - if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then - source drivers/atm/Config.in - fi - fi - endmenu - fi - - source net/ax25/Config.in - - source net/irda/Config.in - - mainmenu_option next_comment - comment 'ISDN subsystem' - if [ "$CONFIG_NET" != "n" ]; then - tristate 'ISDN support' CONFIG_ISDN - if [ "$CONFIG_ISDN" != "n" ]; then - source drivers/isdn/Config.in - fi - fi - endmenu - - if [ "$CONFIG_ISA" = "y" ]; then - mainmenu_option next_comment - comment 'Old CD-ROM drivers (not SCSI, not IDE)' - - bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI - if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then - source drivers/cdrom/Config.in - fi - endmenu - fi - - # - # input before char - char/joystick depends on it. As does USB. - # - source drivers/input/Config.in -else - # - # Block device driver configuration - # - mainmenu_option next_comment - comment 'Block devices' - tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP - dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET - tristate 'RAM disk support' CONFIG_BLK_DEV_RAM - if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then - int ' Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096 - fi - dep_bool ' Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD $CONFIG_BLK_DEV_RAM - bool 'Per partition statistics in /proc/partitions' CONFIG_BLK_STATS - define_bool CONFIG_BLK_DEV_HD n - endmenu -fi - -source drivers/char/Config.in - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - source drivers/media/Config.in -fi - -source fs/Config.in - -mainmenu_option next_comment -comment 'Console drivers' - -define_bool CONFIG_XEN_CONSOLE y - -if [ "$CONFIG_VT" = "y" ]; then - bool 'VGA text console' CONFIG_VGA_CONSOLE - bool 'Dummy console' CONFIG_DUMMY_CONSOLE - if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - bool 'Video mode selection support' CONFIG_VIDEO_SELECT - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE - source drivers/video/Config.in - fi - fi -fi -endmenu - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - mainmenu_option next_comment - comment 'Sound' - - tristate 'Sound card support' CONFIG_SOUND - if [ "$CONFIG_SOUND" != "n" ]; then - source drivers/sound/Config.in - fi - endmenu -fi - -if [ "$CONFIG_XEN_PHYSDEV_ACCESS" = "y" ]; then - source drivers/usb/Config.in - source net/bluetooth/Config.in -fi - -mainmenu_option next_comment -comment 'Kernel hacking' - -bool 'Kernel debugging' CONFIG_DEBUG_KERNEL -if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then - bool ' Check for stack overflows' CONFIG_DEBUG_STACKOVERFLOW - bool ' Debug high memory support' CONFIG_DEBUG_HIGHMEM - bool ' Debug memory allocations' CONFIG_DEBUG_SLAB - bool ' Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT - bool ' Magic SysRq key' CONFIG_MAGIC_SYSRQ - bool ' Spinlock debugging' CONFIG_DEBUG_SPINLOCK - bool ' Verbose BUG() reporting (adds 70K)' CONFIG_DEBUG_BUGVERBOSE - bool ' Load all symbols for debugging' CONFIG_KALLSYMS - bool ' Compile the kernel with frame pointers' CONFIG_FRAME_POINTER -fi - -int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0 - -endmenu - -source crypto/Config.in -source lib/Config.in |