aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--.rootkeys9
-rw-r--r--xen/arch/x86/Makefile9
-rw-r--r--xen/arch/x86/cpu/amd.c254
-rw-r--r--xen/arch/x86/cpu/centaur.c477
-rw-r--r--xen/arch/x86/cpu/common.c579
-rw-r--r--xen/arch/x86/cpu/cpu.h31
-rw-r--r--xen/arch/x86/cpu/cyrix.c400
-rw-r--r--xen/arch/x86/cpu/intel.c244
-rw-r--r--xen/arch/x86/cpu/intel_cacheinfo.c142
-rw-r--r--xen/arch/x86/cpu/rise.c54
-rw-r--r--xen/arch/x86/cpu/transmeta.c108
-rw-r--r--xen/arch/x86/setup.c254
-rw-r--r--xen/include/asm-x86/config.h5
-rw-r--r--xen/include/asm-x86/cpufeature.h38
-rw-r--r--xen/include/asm-x86/msr.h26
-rw-r--r--xen/include/asm-x86/processor.h75
16 files changed, 2405 insertions, 300 deletions
diff --git a/.rootkeys b/.rootkeys
index 0a86cf8407..4b833c13a7 100644
--- a/.rootkeys
+++ b/.rootkeys
@@ -1132,6 +1132,15 @@
3ddb79bcSC_LvnmFlX-T5iTgaR0SKg xen/arch/x86/boot/x86_32.S
40e42bdbNu4MjI750THP_8J1S-Sa0g xen/arch/x86/boot/x86_64.S
4107c15e-VmEcLsE-7JCXZaabI8C7A xen/arch/x86/cdb.c
+4295ecb1Ynez_TseZvDdjD7PzVMDiw xen/arch/x86/cpu/amd.c
+4295ecb1KPPNny26nBEJzK4pAG-KXQ xen/arch/x86/cpu/centaur.c
+4295ecb1QnJx9cbqCJQ1o4TTFQL5Vg xen/arch/x86/cpu/common.c
+4295ecb1ZIJLN5uklV1xompN7DN1WQ xen/arch/x86/cpu/cpu.h
+4295ecb1g6Ye-zy_oXVQQaKw4AtDmw xen/arch/x86/cpu/cyrix.c
+4295ecb1MOdQxXznHu3g-p5DzhMv8g xen/arch/x86/cpu/intel.c
+4295ecb1LsW7ov9JOtRP8euvJKbgbQ xen/arch/x86/cpu/intel_cacheinfo.c
+4295ecb1AeClyruqwLz-xDthMZ5eoA xen/arch/x86/cpu/rise.c
+4295ecb1GO92quFeyoVz2LsPQcFuHg xen/arch/x86/cpu/transmeta.c
3ddb79bcUrk2EIaM5VsT6wUudH1kkg xen/arch/x86/delay.c
4294b5ee34eGSh5YNDKMSxBIOycluw xen/arch/x86/dmi_scan.c
40e34414WiQO4h2m3tcpaCPn7SyYyg xen/arch/x86/dom0_ops.c
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 3978f2ea06..d23182897c 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -6,6 +6,14 @@ OBJS += $(patsubst %.c,%.o,$(wildcard $(TARGET_SUBARCH)/*.c))
OBJS += $(patsubst %.c,%.o,$(wildcard acpi/*.c))
OBJS += $(patsubst %.c,%.o,$(wildcard mtrr/*.c))
OBJS += $(patsubst %.c,%.o,$(wildcard genapic/*.c))
+OBJS += $(patsubst %.c,%.o,$(wildcard cpu/*.c))
+
+ifeq ($(TARGET_SUBARCH),x86_64)
+OBJS := $(subst cpu/centaur.o,,$(OBJS))
+OBJS := $(subst cpu/cyrix.o,,$(OBJS))
+OBJS := $(subst cpu/rise.o,,$(OBJS))
+OBJS := $(subst cpu/transmeta.o,,$(OBJS))
+endif
OBJS := $(subst $(TARGET_SUBARCH)/asm-offsets.o,,$(OBJS))
@@ -38,6 +46,7 @@ clean:
rm -f mtrr/*.o mtrr/*~ mtrr/core
rm -f acpi/*.o acpi/*~ acpi/core
rm -f genapic/*.o genapic/*~ genapic/core
+ rm -f cpu/*.o cpu/*~ cpu/core
delete-unfresh-files:
# nothing
diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c
new file mode 100644
index 0000000000..1241e50921
--- /dev/null
+++ b/xen/arch/x86/cpu/amd.c
@@ -0,0 +1,254 @@
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/bitops.h>
+#include <xen/mm.h>
+#include <xen/smp.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+#define num_physpages 0
+
+/*
+ * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
+ * misexecution of code under Linux. Owners of such processors should
+ * contact AMD for precise details and a CPU swap.
+ *
+ * See http://www.multimania.com/poulot/k6bug.html
+ * http://www.amd.com/K6/k6docs/revgd.html
+ *
+ * The following test is erm.. interesting. AMD neglected to up
+ * the chip setting when fixing the bug but they also tweaked some
+ * performance at the same time..
+ */
+
+extern void vide(void);
+__asm__(".align 4\nvide: ret");
+
+static void __init init_amd(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+ int mbytes = num_physpages >> (20-PAGE_SHIFT);
+ int r;
+
+ /*
+ * FIXME: We should handle the K5 here. Set up the write
+ * range and also turn on MSR 83 bits 4 and 31 (write alloc,
+ * no bus pipeline)
+ */
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ r = get_model_name(c);
+
+ switch(c->x86)
+ {
+ case 4:
+ /*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
+#define CBAR_ENB (0x80000000)
+#define CBAR_KEY (0X000000CB)
+ if (c->x86_model==9 || c->x86_model == 10) {
+ if (inl (CBAR) & CBAR_ENB)
+ outl (0 | CBAR_KEY, CBAR);
+ }
+ break;
+ case 5:
+ if( c->x86_model < 6 )
+ {
+ /* Based on AMD doc 20734R - June 2000 */
+ if ( c->x86_model == 0 ) {
+ clear_bit(X86_FEATURE_APIC, c->x86_capability);
+ set_bit(X86_FEATURE_PGE, c->x86_capability);
+ }
+ break;
+ }
+
+ if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+ const int K6_BUG_LOOP = 1000000;
+ int n;
+ void (*f_vide)(void);
+ unsigned long d, d2;
+
+ printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+ /*
+ * It looks like AMD fixed the 2.6.2 bug and improved indirect
+ * calls at the same time.
+ */
+
+ n = K6_BUG_LOOP;
+ f_vide = vide;
+ rdtscl(d);
+ while (n--)
+ f_vide();
+ rdtscl(d2);
+ d = d2-d;
+
+ /* Knock these two lines out if it debugs out ok */
+ printk(KERN_INFO "AMD K6 stepping B detected - ");
+ /* -- cut here -- */
+ if (d > 20*K6_BUG_LOOP)
+ printk("system stability may be impaired when more than 32 MB are used.\n");
+ else
+ printk("probably OK (after B9730xxxx).\n");
+ printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+ }
+
+ /* K6 with old style WHCR */
+ if (c->x86_model < 8 ||
+ (c->x86_model== 8 && c->x86_mask < 8)) {
+ /* We can only write allocate on the low 508Mb */
+ if(mbytes>508)
+ mbytes=508;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0x0000FFFF)==0) {
+ unsigned long flags;
+ l=(1<<0)|((mbytes/4)<<1);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+ break;
+ }
+
+ if ((c->x86_model == 8 && c->x86_mask >7) ||
+ c->x86_model == 9 || c->x86_model == 13) {
+ /* The more serious chips .. */
+
+ if(mbytes>4092)
+ mbytes=4092;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0xFFFF0000)==0) {
+ unsigned long flags;
+ l=((mbytes>>2)<<22)|(1<<16);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+ break;
+ }
+ break;
+
+ case 6: /* An Athlon/Duron */
+
+ /* Bit 15 of Athlon specific MSR 15, needs to be 0
+ * to enable SSE on Palomino/Morgan/Barton CPU's.
+ * If the BIOS didn't enable it already, enable it here.
+ */
+ if (c->x86_model >= 6 && c->x86_model <= 10) {
+ if (!cpu_has(c, X86_FEATURE_XMM)) {
+ printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+ rdmsr(MSR_K7_HWCR, l, h);
+ l &= ~0x00008000;
+ wrmsr(MSR_K7_HWCR, l, h);
+ set_bit(X86_FEATURE_XMM, c->x86_capability);
+ }
+ }
+
+ /* It's been determined by AMD that Athlons since model 8 stepping 1
+ * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+ * As per AMD technical note 27212 0.2
+ */
+ if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+ rdmsr(MSR_K7_CLK_CTL, l, h);
+ if ((l & 0xfff00000) != 0x20000000) {
+ printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+ ((l & 0x000fffff)|0x20000000));
+ wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+ }
+ }
+ break;
+ }
+
+ switch (c->x86) {
+ case 15:
+ set_bit(X86_FEATURE_K8, c->x86_capability);
+ break;
+ case 6:
+ set_bit(X86_FEATURE_K7, c->x86_capability);
+ break;
+ }
+
+ display_cacheinfo(c);
+ detect_ht(c);
+
+#ifdef CONFIG_X86_HT
+ /* AMD dual core looks like HT but isn't really. Hide it from the
+ scheduler. This works around problems with the domain scheduler.
+ Also probably gives slightly better scheduling and disables
+ SMT nice which is harmful on dual core.
+ TBD tune the domain scheduler for dual core. */
+ if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+ smp_num_siblings = 1;
+#endif
+
+ if (cpuid_eax(0x80000000) >= 0x80000008) {
+ c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+ if (c->x86_num_cores & (c->x86_num_cores - 1))
+ c->x86_num_cores = 1;
+ }
+}
+
+static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* AMD errata T13 (order #21922) */
+ if ((c->x86 == 6)) {
+ if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
+ size = 64;
+ if (c->x86_model == 4 &&
+ (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
+ size = 256;
+ }
+ return size;
+}
+
+static struct cpu_dev amd_cpu_dev __initdata = {
+ .c_vendor = "AMD",
+ .c_ident = { "AuthenticAMD" },
+ .c_models = {
+ { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
+ {
+ [3] = "486 DX/2",
+ [7] = "486 DX/2-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB",
+ [14] = "Am5x86-WT",
+ [15] = "Am5x86-WB"
+ }
+ },
+ },
+ .c_init = init_amd,
+ .c_identify = generic_identify,
+ .c_size_cache = amd_size_cache,
+};
+
+int __init amd_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(amd_init_cpu);
diff --git a/xen/arch/x86/cpu/centaur.c b/xen/arch/x86/cpu/centaur.c
new file mode 100644
index 0000000000..09e5498c2d
--- /dev/null
+++ b/xen/arch/x86/cpu/centaur.c
@@ -0,0 +1,477 @@
+#include <xen/config.h>
+#include <xen/lib.h>
+#include <xen/init.h>
+#include <xen/bitops.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/e820.h>
+#include "cpu.h"
+
+#ifdef CONFIG_X86_OOSTORE
+
+static u32 __init power2(u32 x)
+{
+ u32 s=1;
+ while(s<=x)
+ s<<=1;
+ return s>>=1;
+}
+
+
+/*
+ * Set up an actual MCR
+ */
+
+static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+{
+ u32 lo, hi;
+
+ hi = base & ~0xFFF;
+ lo = ~(size-1); /* Size is a power of 2 so this makes a mask */
+ lo &= ~0xFFF; /* Remove the ctrl value bits */
+ lo |= key; /* Attribute we wish to set */
+ wrmsr(reg+MSR_IDT_MCR0, lo, hi);
+ mtrr_centaur_report_mcr(reg, lo, hi); /* Tell the mtrr driver */
+}
+
+/*
+ * Figure what we can cover with MCR's
+ *
+ * Shortcut: We know you can't put 4Gig of RAM on a winchip
+ */
+
+static u32 __init ramtop(void) /* 16388 */
+{
+ int i;
+ u32 top = 0;
+ u32 clip = 0xFFFFFFFFUL;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long start, end;
+
+ if (e820.map[i].addr > 0xFFFFFFFFUL)
+ continue;
+ /*
+ * Don't MCR over reserved space. Ignore the ISA hole
+ * we frob around that catastrophy already
+ */
+
+ if (e820.map[i].type == E820_RESERVED)
+ {
+ if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+ clip = e820.map[i].addr;
+ continue;
+ }
+ start = e820.map[i].addr;
+ end = e820.map[i].addr + e820.map[i].size;
+ if (start >= end)
+ continue;
+ if (end > top)
+ top = end;
+ }
+ /* Everything below 'top' should be RAM except for the ISA hole.
+ Because of the limited MCR's we want to map NV/ACPI into our
+ MCR range for gunk in RAM
+
+ Clip might cause us to MCR insufficient RAM but that is an
+ acceptable failure mode and should only bite obscure boxes with
+ a VESA hole at 15Mb
+
+ The second case Clip sometimes kicks in is when the EBDA is marked
+ as reserved. Again we fail safe with reasonable results
+ */
+
+ if(top>clip)
+ top=clip;
+
+ return top;
+}
+
+/*
+ * Compute a set of MCR's to give maximum coverage
+ */
+
+static int __init centaur_mcr_compute(int nr, int key)
+{
+ u32 mem = ramtop();
+ u32 root = power2(mem);
+ u32 base = root;
+ u32 top = root;
+ u32 floor = 0;
+ int ct = 0;
+
+ while(ct<nr)
+ {
+ u32 fspace = 0;
+
+ /*
+ * Find the largest block we will fill going upwards
+ */
+
+ u32 high = power2(mem-top);
+
+ /*
+ * Find the largest block we will fill going downwards
+ */
+
+ u32 low = base/2;
+
+ /*
+ * Don't fill below 1Mb going downwards as there
+ * is an ISA hole in the way.
+ */
+
+ if(base <= 1024*1024)
+ low = 0;
+
+ /*
+ * See how much space we could cover by filling below
+ * the ISA hole
+ */
+
+ if(floor == 0)
+ fspace = 512*1024;
+ else if(floor ==512*1024)
+ fspace = 128*1024;
+
+ /* And forget ROM space */
+
+ /*
+ * Now install the largest coverage we get
+ */
+
+ if(fspace > high && fspace > low)
+ {
+ centaur_mcr_insert(ct, floor, fspace, key);
+ floor += fspace;
+ }
+ else if(high > low)
+ {
+ centaur_mcr_insert(ct, top, high, key);
+ top += high;
+ }
+ else if(low > 0)
+ {
+ base -= low;
+ centaur_mcr_insert(ct, base, low, key);
+ }
+ else break;
+ ct++;
+ }
+ /*
+ * We loaded ct values. We now need to set the mask. The caller
+ * must do this bit.
+ */
+
+ return ct;
+}
+
+static void __init centaur_create_optimal_mcr(void)
+{
+ int i;
+ /*
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining and weak write ordered.
+ *
+ * To experiment with: Linux never uses stack operations for
+ * mmio spaces so we could globally enable stack operation wc
+ *
+ * Load the registers with type 31 - full write combining, all
+ * writes weakly ordered.
+ */
+ int used = centaur_mcr_compute(6, 31);
+
+ /*
+ * Wipe unused MCRs
+ */
+
+ for(i=used;i<8;i++)
+ wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+static void __init winchip2_create_optimal_mcr(void)
+{
+ u32 lo, hi;
+ int i;
+
+ /*
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining, weak store ordered.
+ *
+ * Load the registers with type 25
+ * 8 - weak write ordering
+ * 16 - weak read ordering
+ * 1 - write combining
+ */
+
+ int used = centaur_mcr_compute(6, 25);
+
+ /*
+ * Mark the registers we are using.
+ */
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ for(i=0;i<used;i++)
+ lo|=1<<(9+i);
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+
+ /*
+ * Wipe unused MCRs
+ */
+
+ for(i=used;i<8;i++)
+ wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+/*
+ * Handle the MCR key on the Winchip 2.
+ */
+
+static void __init winchip2_unprotect_mcr(void)
+{
+ u32 lo, hi;
+ u32 key;
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ lo&=~0x1C0; /* blank bits 8-6 */
+ key = (lo>>17) & 7;
+ lo |= key<<6; /* replace with unlock key */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+static void __init winchip2_protect_mcr(void)
+{
+ u32 lo, hi;
+
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ lo&=~0x1C0; /* blank bits 8-6 */
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+#endif /* CONFIG_X86_OOSTORE */
+
+#define ACE_PRESENT (1 << 6)
+#define ACE_ENABLED (1 << 7)
+#define ACE_FCR (1 << 28) /* MSR_VIA_FCR */
+
+#define RNG_PRESENT (1 << 2)
+#define RNG_ENABLED (1 << 3)
+#define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */
+
+static void __init init_c3(struct cpuinfo_x86 *c)
+{
+ u32 lo, hi;
+
+ /* Test for Centaur Extended Feature Flags presence */
+ if (cpuid_eax(0xC0000000) >= 0xC0000001) {
+ u32 tmp = cpuid_edx(0xC0000001);
+
+ /* enable ACE unit, if present and disabled */
+ if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
+ rdmsr (MSR_VIA_FCR, lo, hi);
+ lo |= ACE_FCR; /* enable ACE unit */
+ wrmsr (MSR_VIA_FCR, lo, hi);
+ printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
+ }
+
+ /* enable RNG unit, if present and disabled */
+ if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
+ rdmsr (MSR_VIA_RNG, lo, hi);
+ lo |= RNG_ENABLE; /* enable RNG unit */
+ wrmsr (MSR_VIA_RNG, lo, hi);
+ printk(KERN_INFO "CPU: Enabled h/w RNG\n");
+ }
+
+ /* store Centaur Extended Feature Flags as
+ * word 5 of the CPU capability bit array
+ */
+ c->x86_capability[5] = cpuid_edx(0xC0000001);
+ }
+
+ /* Cyrix III family needs CX8 & PGE explicity enabled. */
+ if (c->x86_model >=6 && c->x86_model <= 9) {
+ rdmsr (MSR_VIA_FCR, lo, hi);
+ lo |= (1<<1 | 1<<7);
+ wrmsr (MSR_VIA_FCR, lo, hi);
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+ }
+
+ /* Before Nehemiah, the C3's had 3dNOW! */
+ if (c->x86_model >=6 && c->x86_model <9)
+ set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+
+ get_model_name(c);
+ display_cacheinfo(c);
+}
+
+static void __init init_centaur(struct cpuinfo_x86 *c)
+{
+ enum {
+ ECX8=1<<1,
+ EIERRINT=1<<2,
+ DPM=1<<3,
+ DMCE=1<<4,
+ DSTPCLK=1<<5,
+ ELINEAR=1<<6,
+ DSMC=1<<7,
+ DTLOCK=1<<8,
+ EDCTLB=1<<8,
+ EMMX=1<<9,
+ DPDC=1<<11,
+ EBRPRED=1<<12,
+ DIC=1<<13,
+ DDC=1<<14,
+ DNA=1<<15,
+ ERETSTK=1<<16,
+ E2MMX=1<<19,
+ EAMD3D=1<<20,
+ };
+
+ char *name;
+ u32 fcr_set=0;
+ u32 fcr_clr=0;
+ u32 lo,hi,newlo;
+ u32 aa,bb,cc,dd;
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ switch (c->x86) {
+
+ case 5:
+ switch(c->x86_model) {
+ case 4:
+ name="C6";
+ fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+ fcr_clr=DPDC;
+ printk(KERN_NOTICE "Disabling bugged TSC.\n");
+ clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#ifdef CONFIG_X86_OOSTORE
+ centaur_create_optimal_mcr();
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+
+ The C6 original lacks weak read order
+
+ Note 0x120 is write only on Winchip 1 */
+
+ wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif
+ break;
+ case 8:
+ switch(c->x86_mask) {
+ default:
+ name="2";
+ break;
+ case 7 ... 9:
+ name="2A";
+ break;
+ case 10 ... 15:
+ name="2B";
+ break;
+ }
+ fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+ fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+ */
+ lo|=31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
+ break;
+ case 9:
+ name="3";
+ fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+ fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /* Enable
+ write combining on non-stack, non-string
+ write combining on string, all types
+ weak write ordering
+ */
+ lo|=31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
+ break;
+ case 10:
+ name="4";
+ /* no info on the WC4 yet */
+ break;
+ default:
+ name="??";
+ }
+
+ rdmsr(MSR_IDT_FCR1, lo, hi);
+ newlo=(lo|fcr_set) & (~fcr_clr);
+
+ if (newlo!=lo) {
+ printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
+ wrmsr(MSR_IDT_FCR1, newlo, hi );
+ } else {
+ printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+ }
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+ /* Report CX8 */
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+ /* Set 3DNow! on Winchip 2 and above. */
+ if (c->x86_model >=8)
+ set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+ /* See if we can find out some more. */
+ if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+ /* Yes, we can. */
+ cpuid(0x80000005,&aa,&bb,&cc,&dd);
+ /* Add L1 data and code cache sizes. */
+ c->x86_cache_size = (cc>>24)+(dd>>24);
+ }
+ sprintf( c->x86_model_id, "WinChip %s", name );
+ break;
+
+ case 6:
+ init_c3(c);
+ break;
+ }
+}
+
+static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* VIA C3 CPUs (670-68F) need further shifting. */
+ if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
+ size >>= 8;
+
+ /* VIA also screwed up Nehemiah stepping 1, and made
+ it return '65KB' instead of '64KB'
+ - Note, it seems this may only be in engineering samples. */
+ if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
+ size -=1;
+
+ return size;
+}
+
+static struct cpu_dev centaur_cpu_dev __initdata = {
+ .c_vendor = "Centaur",
+ .c_ident = { "CentaurHauls" },
+ .c_init = init_centaur,
+ .c_size_cache = centaur_size_cache,
+};
+
+int __init centaur_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(centaur_init_cpu);
diff --git a/xen/arch/x86/cpu/common.c b/xen/arch/x86/cpu/common.c
new file mode 100644
index 0000000000..145ef6187f
--- /dev/null
+++ b/xen/arch/x86/cpu/common.c
@@ -0,0 +1,579 @@
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/string.h>
+#include <xen/delay.h>
+#include <xen/smp.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+
+#include "cpu.h"
+
+#define tsc_disable 0
+#define disable_pse 0
+
+static int cachesize_override __initdata = -1;
+static int disable_x86_fxsr __initdata = 0;
+static int disable_x86_serial_nr __initdata = 1;
+
+struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+
+static void default_init(struct cpuinfo_x86 * c)
+{
+ /* Not much we can do here... */
+ /* Check if at least it has cpuid */
+ if (c->cpuid_level == -1) {
+ /* No cpuid. It must be an ancient CPU */
+ if (c->x86 == 4)
+ strcpy(c->x86_model_id, "486");
+ else if (c->x86 == 3)
+ strcpy(c->x86_model_id, "386");
+ }
+}
+
+static struct cpu_dev default_cpu = {
+ .c_init = default_init,
+};
+static struct cpu_dev * this_cpu = &default_cpu;
+
+int __init get_model_name(struct cpuinfo_x86 *c)
+{
+ unsigned int *v;
+ char *p, *q;
+
+ if (cpuid_eax(0x80000000) < 0x80000004)
+ return 0;
+
+ v = (unsigned int *) c->x86_model_id;
+ cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+ cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+ cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+ c->x86_model_id[48] = 0;
+
+ /* Intel chips right-justify this string for some dumb reason;
+ undo that brain damage */
+ p = q = &c->x86_model_id[0];
+ while ( *p == ' ' )
+ p++;
+ if ( p != q ) {
+ while ( *p )
+ *q++ = *p++;
+ while ( q <= &c->x86_model_id[48] )
+ *q++ = '\0'; /* Zero-pad the rest */
+ }
+
+ return 1;
+}
+
+
+void __init display_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int n, dummy, ecx, edx, l2size;
+
+ n = cpuid_eax(0x80000000);
+
+ if (n >= 0x80000005) {
+ cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+ printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
+ edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+ c->x86_cache_size=(ecx>>24)+(edx>>24);
+ }
+
+ if (n < 0x80000006) /* Some chips just has a large L1. */
+ return;
+
+ ecx = cpuid_ecx(0x80000006);
+ l2size = ecx >> 16;
+
+ /* do processor-specific cache resizing */
+ if (this_cpu->c_size_cache)
+ l2size = this_cpu->c_size_cache(c,l2size);
+
+ /* Allow user to override all this if necessary. */
+ if (cachesize_override != -1)
+ l2size = cachesize_override;
+
+ if ( l2size == 0 )
+ return; /* Again, no L2 cache is possible */
+
+ c->x86_cache_size = l2size;
+
+ printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+ l2size, ecx & 0xFF);
+}
+
+/* Naming convention should be: <Name> [(<Codename>)] */
+/* This table only is used unless init_<vendor>() below doesn't set it; */
+/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+
+/* Look up CPU names by table lookup. */
+static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+{
+ struct cpu_model_info *info;
+
+ if ( c->x86_model >= 16 )
+ return NULL; /* Range check */
+
+ if (!this_cpu)
+ return NULL;
+
+ info = this_cpu->c_models;
+
+ while (info && info->family) {
+ if (info->family == c->x86)
+ return info->model_names[c->x86_model];
+ info++;
+ }
+ return NULL; /* Not found */
+}
+
+
+void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+{
+ char *v = c->x86_vendor_id;
+ int i;
+
+ for (i = 0; i < X86_VENDOR_NUM; i++) {
+ if (cpu_devs[i]) {
+ if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
+ (cpu_devs[i]->c_ident[1] &&
+ !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+ c->x86_vendor = i;
+ if (!early)
+ this_cpu = cpu_devs[i];
+ break;
+ }
+ }
+ }
+}
+
+
+static int __init x86_fxsr_setup(char * s)
+{
+ disable_x86_fxsr = 1;
+ return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(unsigned long flag)
+{
+ unsigned long f1, f2;
+
+ asm("pushf\n\t"
+ "pushf\n\t"
+ "pop %0\n\t"
+ "mov %0,%1\n\t"
+ "xor %2,%0\n\t"
+ "push %0\n\t"
+ "popf\n\t"
+ "pushf\n\t"
+ "pop %0\n\t"
+ "popf\n\t"
+ : "=&r" (f1), "=&r" (f2)
+ : "ir" (flag));
+
+ return ((f1^f2) & flag) != 0;
+}
+
+
+/* Probe for the CPUID instruction */
+int __init have_cpuid_p(void)
+{
+ return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+/* Do minimum CPU detection early.
+ Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
+ The others are not touched to avoid unwanted side effects. */
+void __init early_cpu_detect(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ c->x86_cache_alignment = 32;
+
+ if (!have_cpuid_p())
+ return;
+
+ /* Get vendor name */
+ cpuid(0x00000000, &c->cpuid_level,
+ (int *)&c->x86_vendor_id[0],
+ (int *)&c->x86_vendor_id[8],
+ (int *)&c->x86_vendor_id[4]);
+
+ get_cpu_vendor(c, 1);
+
+ c->x86 = 4;
+ if (c->cpuid_level >= 0x00000001) {
+ u32 junk, tfms, cap0, misc;
+ cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
+ c->x86 = (tfms >> 8) & 15;
+ c->x86_model = (tfms >> 4) & 15;
+ if (c->x86 == 0xf) {
+ c->x86 += (tfms >> 20) & 0xff;
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+ }
+ c->x86_mask = tfms & 15;
+ if (cap0 & (1<<19))
+ c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
+ }
+
+ early_intel_workaround(c);
+}
+
+void __init generic_identify(struct cpuinfo_x86 * c)
+{
+ u32 tfms, xlvl;
+ int junk;
+
+ if (have_cpuid_p()) {
+ /* Get vendor name */
+ cpuid(0x00000000, &c->cpuid_level,
+ (int *)&c->x86_vendor_id[0],
+ (int *)&c->x86_vendor_id[8],
+ (int *)&c->x86_vendor_id[4]);
+
+ get_cpu_vendor(c, 0);
+ /* Initialize the standard set of capabilities */
+ /* Note that the vendor-specific code below might override */
+
+ /* Intel-defined flags: level 0x00000001 */
+ if ( c->cpuid_level >= 0x00000001 ) {
+ u32 capability, excap;
+ cpuid(0x00000001, &tfms, &junk, &excap, &capability);
+ c->x86_capability[0] = capability;
+ c->x86_capability[4] = excap;
+ c->x86 = (tfms >> 8) & 15;
+ c->x86_model = (tfms >> 4) & 15;
+ if (c->x86 == 0xf) {
+ c->x86 += (tfms >> 20) & 0xff;
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+ }
+ c->x86_mask = tfms & 15;
+ } else {
+ /* Have CPUID level 0 only - unheard of */
+ c->x86 = 4;
+ }
+
+ /* AMD-defined flags: level 0x80000001 */
+ xlvl = cpuid_eax(0x80000000);
+ if ( (xlvl & 0xffff0000) == 0x80000000 ) {
+ if ( xlvl >= 0x80000001 ) {
+ c->x86_capability[1] = cpuid_edx(0x80000001);
+ c->x86_capability[6] = cpuid_ecx(0x80000001);
+ }
+ if ( xlvl >= 0x80000004 )
+ get_model_name(c); /* Default name */
+ }
+ }
+}
+
+static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+ /* Disable processor serial number */
+ unsigned long lo,hi;
+ rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ lo |= 0x200000;
+ wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ printk(KERN_NOTICE "CPU serial number disabled.\n");
+ clear_bit(X86_FEATURE_PN, c->x86_capability);
+
+ /* Disabling the serial number may affect the cpuid level */
+ c->cpuid_level = cpuid_eax(0);
+ }
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+ disable_x86_serial_nr = 0;
+ return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+
+
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
+{
+ int i;
+
+ c->x86_cache_size = -1;
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+ c->cpuid_level = -1; /* CPUID not detected */
+ c->x86_model = c->x86_mask = 0; /* So far unknown... */
+ c->x86_vendor_id[0] = '\0'; /* Unset */
+ c->x86_model_id[0] = '\0'; /* Unset */
+ c->x86_num_cores = 1;
+ memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+ if (!have_cpuid_p()) {
+ /* First of all, decide if this is a 486 or higher */
+ /* It's a 486 if we can modify the AC flag */
+ if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+ c->x86 = 4;
+ else
+ c->x86 = 3;
+ }
+
+ generic_identify(c);
+
+#ifdef NOISY_CAPS
+ printk(KERN_DEBUG "CPU: After generic identify, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+#endif
+
+ if (this_cpu->c_identify) {
+ this_cpu->c_identify(c);
+#ifdef NOISY_CAPS
+ printk(KERN_DEBUG "CPU: After vendor identify, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+#endif
+ }
+
+ /*
+ * Vendor-specific initialization. In this section we
+ * canonicalize the feature flags, meaning if there are
+ * features a certain CPU supports which CPUID doesn't
+ * tell us, CPUID claiming incorrect flags, or other bugs,
+ * we handle them here.
+ *
+ * At the end of this section, c->x86_capability better
+ * indicate the features this CPU genuinely supports!
+ */
+ if (this_cpu->c_init)
+ this_cpu->c_init(c);
+
+ /* Disable the PN if appropriate */
+ squash_the_stupid_serial_number(c);
+
+ /*
+ * The vendor-specific functions might have changed features. Now
+ * we do "generic changes."
+ */
+
+ /* TSC disabled? */
+ if ( tsc_disable )
+ clear_bit(X86_FEATURE_TSC, c->x86_capability);
+
+ /* FXSR disabled? */
+ if (disable_x86_fxsr) {
+ clear_bit(X86_FEATURE_FXSR, c->x86_capability);
+ clear_bit(X86_FEATURE_XMM, c->x86_capability);
+ }
+
+ if (disable_pse)
+ clear_bit(X86_FEATURE_PSE, c->x86_capability);
+
+ /* If the model name is still unset, do table lookup. */
+ if ( !c->x86_model_id[0] ) {
+ char *p;
+ p = table_lookup_model(c);
+ if ( p )
+ strcpy(c->x86_model_id, p);
+ else
+ /* Last resort... */
+ sprintf(c->x86_model_id, "%02x/%02x",
+ c->x86_vendor, c->x86_model);
+ }
+
+ /* Now the feature flags better reflect actual CPU features! */
+#ifdef NOISY_CAPS
+ printk(KERN_DEBUG "CPU: After all inits, caps:");
+ for (i = 0; i < NCAPINTS; i++)
+ printk(" %08lx", c->x86_capability[i]);
+ printk("\n");
+#endif
+ /*
+ * On SMP, boot_cpu_data holds the common feature set between
+ * all CPUs; so make sure that we indicate which features are
+ * common between the CPUs. The first time this routine gets
+ * executed, c == &boot_cpu_data.
+ */
+ if ( c != &boot_cpu_data ) {
+ /* AND the already accumulated flags with these */
+ for ( i = 0 ; i < NCAPINTS ; i++ )
+ boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+ }
+
+ /* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
+ mcheck_init(c);
+#endif
+}
+/*
+ * Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c
+ */
+
+void __init dodgy_tsc(void)
+{
+ if (( boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX ) ||
+ ( boot_cpu_data.x86_vendor == X86_VENDOR_NSC ))
+ cpu_devs[X86_VENDOR_CYRIX]->c_init(&boot_cpu_data);
+}
+
+#ifdef CONFIG_X86_HT
+void __init detect_ht(struct cpuinfo_x86 *c)
+{
+ u32 eax, ebx, ecx, edx;
+ int index_lsb, index_msb, tmp;
+ int cpu = smp_processor_id();
+
+ if (!cpu_has(c, X86_FEATURE_HT))
+ return;
+
+ cpuid(1, &eax, &ebx, &ecx, &edx);
+ smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+ if (smp_num_siblings == 1) {
+ printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ } else if (smp_num_siblings > 1 ) {
+ index_lsb = 0;
+ index_msb = 31;
+
+ if (smp_num_siblings > NR_CPUS) {
+ printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+ smp_num_siblings = 1;
+ return;
+ }
+ tmp = smp_num_siblings;
+ while ((tmp & 1) == 0) {
+ tmp >>=1 ;
+ index_lsb++;
+ }
+ tmp = smp_num_siblings;
+ while ((tmp & 0x80000000 ) == 0) {
+ tmp <<=1 ;
+ index_msb--;
+ }
+ if (index_lsb != index_msb )
+ index_msb++;
+ phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ phys_proc_id[cpu]);
+ }
+}
+#endif
+
+void __init print_cpu_info(struct cpuinfo_x86 *c)
+{
+ char *vendor = NULL;
+
+ if (c->x86_vendor < X86_VENDOR_NUM)
+ vendor = this_cpu->c_vendor;
+ else if (c->cpuid_level >= 0)
+ vendor = c->x86_vendor_id;
+
+ if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
+ printk("%s ", vendor);
+
+ if (!c->x86_model_id[0])
+ printk("%d86", c->x86);
+ else
+ printk("%s", c->x86_model_id);
+
+ if (c->x86_mask || c->cpuid_level >= 0)
+ printk(" stepping %02x\n", c->x86_mask);
+ else
+ printk("\n");
+}
+
+cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+
+/* This is hacky. :)
+ * We're emulating future behavior.
+ * In the future, the cpu-specific init functions will be called implicitly
+ * via the magic of initcalls.
+ * They will insert themselves into the cpu_devs structure.
+ * Then, when cpu_init() is called, we can just iterate over that array.
+ */
+
+extern int intel_cpu_init(void);
+extern int cyrix_init_cpu(void);
+extern int nsc_init_cpu(void);
+extern int amd_init_cpu(void);
+extern int centaur_init_cpu(void);
+extern int transmeta_init_cpu(void);
+extern int rise_init_cpu(void);
+void early_cpu_detect(void);
+
+void __init early_cpu_init(void)
+{
+ intel_cpu_init();
+ amd_init_cpu();
+#ifdef CONFIG_X86_32
+ cyrix_init_cpu();
+ nsc_init_cpu();
+ centaur_init_cpu();
+ transmeta_init_cpu();
+ rise_init_cpu();
+#endif
+ early_cpu_detect();
+}
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+void __init cpu_init (void)
+{
+ int cpu = smp_processor_id();
+ struct tss_struct *t = &init_tss[cpu];
+ char gdt_load[10];
+
+ if (cpu_test_and_set(cpu, cpu_initialized)) {
+ printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
+ for (;;) local_irq_enable();
+ }
+ printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+ if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
+ clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+ *(unsigned short *)(&gdt_load[0]) = LAST_RESERVED_GDT_BYTE;
+ *(unsigned long *)(&gdt_load[2]) = GDT_VIRT_START(current);
+ __asm__ __volatile__ ( "lgdt %0" : "=m" (gdt_load) );
+
+ /* No nested task. */
+ __asm__("pushf ; andw $0xbfff,(%"__OP"sp) ; popf");
+
+ /* Ensure FPU gets initialised for each domain. */
+ stts();
+
+ /* Set up and load the per-CPU TSS and LDT. */
+ t->bitmap = IOBMP_INVALID_OFFSET;
+#if defined(CONFIG_X86_32)
+ t->ss0 = __HYPERVISOR_DS;
+ t->esp0 = get_stack_bottom();
+#elif defined(CONFIG_X86_64)
+ /* Bottom-of-stack must be 16-byte aligned! */
+ BUG_ON((get_stack_bottom() & 15) != 0);
+ t->rsp0 = get_stack_bottom();
+#endif
+ set_tss_desc(cpu,t);
+ load_TR(cpu);
+ __asm__ __volatile__ ( "lldt %%ax" : : "a" (0) );
+
+ /* Clear all 6 debug registers: */
+#define CD(register) __asm__("mov %0,%%db" #register ::"r"(0UL) );
+ CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
+#undef CD
+
+ /* Install correct page table. */
+ write_ptbase(current);
+}
diff --git a/xen/arch/x86/cpu/cpu.h b/xen/arch/x86/cpu/cpu.h
new file mode 100644
index 0000000000..9df38d993c
--- /dev/null
+++ b/xen/arch/x86/cpu/cpu.h
@@ -0,0 +1,31 @@
+
+struct cpu_model_info {
+ int vendor;
+ int family;
+ char *model_names[16];
+};
+
+/* attempt to consolidate cpu attributes */
+struct cpu_dev {
+ char * c_vendor;
+
+ /* some have two possibilities for cpuid string */
+ char * c_ident[2];
+
+ struct cpu_model_info c_models[4];
+
+ void (*c_init)(struct cpuinfo_x86 * c);
+ void (*c_identify)(struct cpuinfo_x86 * c);
+ unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+};
+
+extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+
+extern int get_model_name(struct cpuinfo_x86 *c);
+extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+extern void generic_identify(struct cpuinfo_x86 * c);
+extern int have_cpuid_p(void);
+
+extern void early_intel_workaround(struct cpuinfo_x86 *c);
+
diff --git a/xen/arch/x86/cpu/cyrix.c b/xen/arch/x86/cpu/cyrix.c
new file mode 100644
index 0000000000..6a3b98ea71
--- /dev/null
+++ b/xen/arch/x86/cpu/cyrix.c
@@ -0,0 +1,400 @@
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/irq.h>
+#include <xen/bitops.h>
+#include <xen/delay.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
+ */
+void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned char ccr2, ccr3;
+ unsigned long flags;
+
+ /* we test for DEVID by checking whether CCR3 is writable */
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, ccr3 ^ 0x80);
+ getCx86(0xc0); /* dummy to change bus */
+
+ if (getCx86(CX86_CCR3) == ccr3) { /* no DEVID regs. */
+ ccr2 = getCx86(CX86_CCR2);
+ setCx86(CX86_CCR2, ccr2 ^ 0x04);
+ getCx86(0xc0); /* dummy */
+
+ if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
+ *dir0 = 0xfd;
+ else { /* Cx486S A step */
+ setCx86(CX86_CCR2, ccr2);
+ *dir0 = 0xfe;
+ }
+ }
+ else {
+ setCx86(CX86_CCR3, ccr3); /* restore CCR3 */
+
+ /* read DIR0 and DIR1 CPU registers */
+ *dir0 = getCx86(CX86_DIR0);
+ *dir1 = getCx86(CX86_DIR1);
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
+ * order to identify the Cyrix CPU model after we're out of setup.c
+ *
+ * Actually since bugs.h doesn't even reference this perhaps someone should
+ * fix the documentation ???
+ */
+static unsigned char Cx86_dir0_msb __initdata = 0;
+
+static char Cx86_model[][9] __initdata = {
+ "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
+ "M II ", "Unknown"
+};
+static char Cx486_name[][5] __initdata = {
+ "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
+ "SRx2", "DRx2"
+};
+static char Cx486S_name[][4] __initdata = {
+ "S", "S2", "Se", "S2e"
+};
+static char Cx486D_name[][4] __initdata = {
+ "DX", "DX2", "?", "?", "?", "DX4"
+};
+static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __initdata = "12??43";
+static char cyrix_model_mult2[] __initdata = "12233445";
+
+/*
+ * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
+ * BIOSes for compatibility with DOS games. This makes the udelay loop
+ * work correctly, and improves performance.
+ *
+ * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
+ */
+
+static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+{
+ unsigned long flags;
+
+ if (Cx86_dir0_msb == 3) {
+ unsigned char ccr3, ccr5;
+
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ ccr5 = getCx86(CX86_CCR5);
+ if (ccr5 & 2)
+ setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ local_irq_restore(flags);
+ }
+}
+
+
+static void __init set_cx86_reorder(void)
+{
+ u8 ccr3;
+
+ printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n");
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+
+ /* Load/Store Serialize to mem access disable (=reorder it)  */
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ /* set load/store serialize from 1GB to 4GB */
+ ccr3 |= 0xe0;
+ setCx86(CX86_CCR3, ccr3);
+}
+
+static void __init set_cx86_memwb(void)
+{
+ u32 cr0;
+
+ printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
+
+ /* CCR2 bit 2: unlock NW bit */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ /* set 'Not Write-through' */
+ cr0 = 0x20000000;
+ __asm__("movl %%cr0,%%eax\n\t"
+ "orl %0,%%eax\n\t"
+ "movl %%eax,%%cr0\n"
+ : : "r" (cr0)
+ :"ax");
+ /* CCR2 bit 2: lock NW bit and set WT1 */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+}
+
+static void __init set_cx86_inc(void)
+{
+ unsigned char ccr3;
+
+ printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
+
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+ /* PCR1 -- Performance Control */
+ /* Incrementor on, whatever that is */
+ setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
+ /* PCR0 -- Performance Control */
+ /* Incrementor Margin 10 */
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+}
+
+/*
+ * Configure later MediaGX and/or Geode processor.
+ */
+
+static void __init geode_configure(void)
+{
+ unsigned long flags;
+ u8 ccr3, ccr4;
+ local_irq_save(flags);
+
+ /* Suspend on halt power saving and enable #SUSP pin */
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */
+
+ ccr4 = getCx86(CX86_CCR4);
+ ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
+
+ setCx86(CX86_CCR3, ccr3);
+
+ set_cx86_memwb();
+ set_cx86_reorder();
+ set_cx86_inc();
+
+ local_irq_restore(flags);
+}
+
+
+static void __init init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
+ char *buf = c->x86_model_id;
+ const char *p = NULL;
+
+ /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ clear_bit(0*32+31, c->x86_capability);
+
+ /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
+ if ( test_bit(1*32+24, c->x86_capability) ) {
+ clear_bit(1*32+24, c->x86_capability);
+ set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+ }
+
+ do_cyrix_devid(&dir0, &dir1);
+
+ check_cx686_slop(c);
+
+ Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+ dir0_lsn = dir0 & 0xf; /* model or clock multiplier */
+
+ /* common case step number/rev -- exceptions handled below */
+ c->x86_model = (dir1 >> 4) + 1;
+ c->x86_mask = dir1 & 0xf;
+
+ /* Now cook; the original recipe is by Channing Corn, from Cyrix.
+ * We do the same thing for each generation: we work out
+ * the model, multiplier and stepping. Black magic included,
+ * to make the silicon step/rev numbers match the printed ones.
+ */
+
+ switch (dir0_msn) {
+ unsigned char tmp;
+
+ case 0: /* Cx486SLC/DLC/SRx/DRx */
+ p = Cx486_name[dir0_lsn & 7];
+ break;
+
+ case 1: /* Cx486S/DX/DX2/DX4 */
+ p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
+ : Cx486S_name[dir0_lsn & 3];
+ break;
+
+ case 2: /* 5x86 */
+ Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+ p = Cx86_cb+2;
+ break;
+
+ case 3: /* 6x86/6x86L */
+ Cx86_cb[1] = ' ';
+ Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+ if (dir1 > 0x21) { /* 686L */
+ Cx86_cb[0] = 'L';
+ p = Cx86_cb;
+ (c->x86_model)++;
+ } else /* 686 */
+ p = Cx86_cb+1;
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ /* 6x86's contain this bug */
+ c->coma_bug = 1;
+ break;
+
+ case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
+ c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
+
+ /* GXm supports extended cpuid levels 'ala' AMD */
+ if (c->cpuid_level == 2) {
+ /* Enable cxMMX extensions (GX1 Datasheet 54) */
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+
+ /* GXlv/GXm/GX1 */
+ if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63)
+ geode_configure();
+ get_model_name(c); /* get CPU marketing name */
+ return;
+ }
+ else { /* MediaGX */
+ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
+ p = Cx86_cb+2;
+ c->x86_model = (dir1 & 0x20) ? 1 : 2;
+ }
+ break;
+
+ case 5: /* 6x86MX/M II */
+ if (dir1 > 7)
+ {
+ dir0_msn++; /* M II */
+ /* Enable MMX extensions (App note 108) */
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ }
+ else
+ {
+ c->coma_bug = 1; /* 6x86MX, it has the bug. */
+ }
+ tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
+ Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
+ p = Cx86_cb+tmp;
+ if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+ (c->x86_model)++;
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ break;
+
+ case 0xf: /* Cyrix 486 without DEVID registers */
+ switch (dir0_lsn) {
+ case 0xd: /* either a 486SLC or DLC w/o DEVID */
+ dir0_msn = 0;
+ p = Cx486_name[(c->hard_math) ? 1 : 0];
+ break;
+
+ case 0xe: /* a 486S A step */
+ dir0_msn = 0;
+ p = Cx486S_name[0];
+ break;
+ }
+ break;
+
+ default: /* unknown (shouldn't happen, we know everyone ;-) */
+ dir0_msn = 7;
+ break;
+ }
+ strcpy(buf, Cx86_model[dir0_msn & 7]);
+ if (p) strcat(buf, p);
+ return;
+}
+
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+ unsigned int test;
+
+ __asm__ __volatile__(
+ "sahf\n\t" /* clear flags (%eax = 0x0005) */
+ "div %b2\n\t" /* divide 5 by 2 */
+ "lahf" /* store flags into %ah */
+ : "=a" (test)
+ : "0" (5), "q" (2)
+ : "cc");
+
+ /* AH is 0x02 on Cyrix after the divide.. */
+ return (unsigned char) (test >> 8) == 0x02;
+}
+
+static void cyrix_identify(struct cpuinfo_x86 * c)
+{
+ /* Detect Cyrix with disabled CPUID */
+ if ( c->x86 == 4 && test_cyrix_52div() ) {
+ unsigned char dir0, dir1;
+
+ strcpy(c->x86_vendor_id, "CyrixInstead");
+ c->x86_vendor = X86_VENDOR_CYRIX;
+
+ /* Actually enable cpuid on the older cyrix */
+
+ /* Retrieve CPU revisions */
+
+ do_cyrix_devid(&dir0, &dir1);
+
+ dir0>>=4;
+
+ /* Check it is an affected model */
+
+ if (dir0 == 5 || dir0 == 3)
+ {
+ unsigned char ccr3, ccr4;
+ unsigned long flags;
+ printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+ local_irq_save(flags);
+ ccr3 = getCx86(CX86_CCR3);
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
+ ccr4 = getCx86(CX86_CCR4);
+ setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ local_irq_restore(flags);
+ }
+ }
+ generic_identify(c);
+}
+
+static struct cpu_dev cyrix_cpu_dev __initdata = {
+ .c_vendor = "Cyrix",
+ .c_ident = { "CyrixInstead" },
+ .c_init = init_cyrix,
+ .c_identify = cyrix_identify,
+};
+
+int __init cyrix_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(cyrix_init_cpu);
+
+static struct cpu_dev nsc_cpu_dev __initdata = {
+ .c_vendor = "NSC",
+ .c_ident = { "Geode by NSC" },
+ .c_init = init_cyrix,
+ .c_identify = generic_identify,
+};
+
+int __init nsc_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(nsc_init_cpu);
diff --git a/xen/arch/x86/cpu/intel.c b/xen/arch/x86/cpu/intel.c
new file mode 100644
index 0000000000..58826cb21d
--- /dev/null
+++ b/xen/arch/x86/cpu/intel.c
@@ -0,0 +1,244 @@
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/kernel.h>
+#include <xen/string.h>
+#include <xen/bitops.h>
+#include <xen/smp.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+
+#include "cpu.h"
+
+#define select_idle_routine(x) ((void)0)
+
+extern int trap_init_f00f_bug(void);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask;
+#endif
+
+void __init early_intel_workaround(struct cpuinfo_x86 *c)
+{
+ if (c->x86_vendor != X86_VENDOR_INTEL)
+ return;
+ /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+ if (c->x86 == 15 && c->x86_cache_alignment == 64)
+ c->x86_cache_alignment = 128;
+}
+
+/*
+ * Early probe support logic for ppro memory erratum #50
+ *
+ * This is called before we do cpu ident work
+ */
+
+int __init ppro_with_ram_bug(void)
+{
+ /* Uses data from early_cpu_detect now */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model == 1 &&
+ boot_cpu_data.x86_mask < 8) {
+ printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+ return 1;
+ }
+ return 0;
+}
+
+
+/*
+ * P4 Xeon errata 037 workaround.
+ * Hardware prefetcher may cause stale data to be loaded into the cache.
+ */
+static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+{
+ unsigned long lo, hi;
+
+ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+ rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ if ((lo & (1<<9)) == 0) {
+ printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
+ printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
+ lo |= (1<<9); /* Disable hw prefetching */
+ wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ }
+ }
+}
+
+
+static void __init init_intel(struct cpuinfo_x86 *c)
+{
+ unsigned int l2 = 0;
+ char *p = NULL;
+
+#ifdef CONFIG_X86_F00F_BUG
+ /*
+ * All current models of Pentium and Pentium with MMX technology CPUs
+ * have the F0 0F bug, which lets nonprivileged users lock up the system.
+ * Note that the workaround only should be initialized once...
+ */
+ c->f00f_bug = 0;
+ if ( c->x86 == 5 ) {
+ static int f00f_workaround_enabled = 0;
+
+ c->f00f_bug = 1;
+ if ( !f00f_workaround_enabled ) {
+ trap_init_f00f_bug();
+ printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+ f00f_workaround_enabled = 1;
+ }
+ }
+#endif
+
+ select_idle_routine(c);
+ l2 = init_intel_cacheinfo(c);
+
+ /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
+ if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+ clear_bit(X86_FEATURE_SEP, c->x86_capability);
+
+ /* Names for the Pentium II/Celeron processors
+ detectable only by also checking the cache size.
+ Dixon is NOT a Celeron. */
+ if (c->x86 == 6) {
+ switch (c->x86_model) {
+ case 5:
+ if (c->x86_mask == 0) {
+ if (l2 == 0)
+ p = "Celeron (Covington)";
+ else if (l2 == 256)
+ p = "Mobile Pentium II (Dixon)";
+ }
+ break;
+
+ case 6:
+ if (l2 == 128)
+ p = "Celeron (Mendocino)";
+ else if (c->x86_mask == 0 || c->x86_mask == 5)
+ p = "Celeron-A";
+ break;
+
+ case 8:
+ if (l2 == 128)
+ p = "Celeron (Coppermine)";
+ break;
+ }
+ }
+
+ if ( p )
+ strcpy(c->x86_model_id, p);
+
+ detect_ht(c);
+
+ /* Work around errata */
+ Intel_errata_workarounds(c);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+ /*
+ * Set up the preferred alignment for movsl bulk memory moves
+ */
+ switch (c->x86) {
+ case 4: /* 486: untested */
+ break;
+ case 5: /* Old Pentia: untested */
+ break;
+ case 6: /* PII/PIII only like movsl with 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ case 15: /* P4 is OK down to 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ }
+#endif
+
+ if (c->x86 == 15)
+ set_bit(X86_FEATURE_P4, c->x86_capability);
+ if (c->x86 == 6)
+ set_bit(X86_FEATURE_P3, c->x86_capability);
+}
+
+
+static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+ /* Intel PIII Tualatin. This comes in two flavours.
+ * One has 256kb of cache, the other 512. We have no way
+ * to determine which, so we use a boottime override
+ * for the 512kb model, and assume 256 otherwise.
+ */
+ if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
+ size = 256;
+ return size;
+}
+
+static struct cpu_dev intel_cpu_dev __initdata = {
+ .c_vendor = "Intel",
+ .c_ident = { "GenuineIntel" },
+ .c_models = {
+ { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
+ {
+ [0] = "486 DX-25/33",
+ [1] = "486 DX-50",
+ [2] = "486 SX",
+ [3] = "486 DX/2",
+ [4] = "486 SL",
+ [5] = "486 SX/2",
+ [7] = "486 DX/2-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB"
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
+ {
+ [0] = "Pentium 60/66 A-step",
+ [1] = "Pentium 60/66",
+ [2] = "Pentium 75 - 200",
+ [3] = "OverDrive PODP5V83",
+ [4] = "Pentium MMX",
+ [7] = "Mobile Pentium 75 - 200",
+ [8] = "Mobile Pentium MMX"
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
+ {
+ [0] = "Pentium Pro A-step",
+ [1] = "Pentium Pro",
+ [3] = "Pentium II (Klamath)",
+ [4] = "Pentium II (Deschutes)",
+ [5] = "Pentium II (Deschutes)",
+ [6] = "Mobile Pentium II",
+ [7] = "Pentium III (Katmai)",
+ [8] = "Pentium III (Coppermine)",
+ [10] = "Pentium III (Cascades)",
+ [11] = "Pentium III (Tualatin)",
+ }
+ },
+ { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
+ {
+ [0] = "Pentium 4 (Unknown)",
+ [1] = "Pentium 4 (Willamette)",
+ [2] = "Pentium 4 (Northwood)",
+ [4] = "Pentium 4 (Foster)",
+ [5] = "Pentium 4 (Foster)",
+ }
+ },
+ },
+ .c_init = init_intel,
+ .c_identify = generic_identify,
+ .c_size_cache = intel_size_cache,
+};
+
+__init int intel_cpu_init(void)
+{
+ cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
+ return 0;
+}
+
+// arch_initcall(intel_cpu_init);
+
diff --git a/xen/arch/x86/cpu/intel_cacheinfo.c b/xen/arch/x86/cpu/intel_cacheinfo.c
new file mode 100644
index 0000000000..f309467e29
--- /dev/null
+++ b/xen/arch/x86/cpu/intel_cacheinfo.c
@@ -0,0 +1,142 @@
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/lib.h>
+#include <asm/processor.h>
+
+#define LVL_1_INST 1
+#define LVL_1_DATA 2
+#define LVL_2 3
+#define LVL_3 4
+#define LVL_TRACE 5
+
+struct _cache_table
+{
+ unsigned char descriptor;
+ char cache_type;
+ short size;
+};
+
+/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+static struct _cache_table cache_table[] __initdata =
+{
+ { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
+ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */
+ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x29, LVL_3, 4096 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64 byte line size */
+ { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
+ { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
+ { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
+ { 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */
+ { 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */
+ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x68, LVL_1_DATA, 32 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */
+ { 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */
+ { 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */
+ { 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */
+ { 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7b, LVL_2, 512 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7c, LVL_2, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */
+ { 0x7d, LVL_2, 2048 }, /* 8-way set assoc, 64 byte line size */
+ { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */
+ { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */
+ { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */
+ { 0x84, LVL_2, 1024 }, /* 8-way set assoc, 32 byte line size */
+ { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */
+ { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */
+ { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */
+ { 0x00, 0, 0}
+};
+
+unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+
+ if (c->cpuid_level > 1) {
+ /* supports eax=2 call */
+ int i, j, n;
+ int regs[4];
+ unsigned char *dp = (unsigned char *)regs;
+
+ /* Number of times to iterate */
+ n = cpuid_eax(2) & 0xFF;
+
+ for ( i = 0 ; i < n ; i++ ) {
+ cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
+
+ /* If bit 31 is set, this is an unknown format */
+ for ( j = 0 ; j < 3 ; j++ ) {
+ if ( regs[j] < 0 ) regs[j] = 0;
+ }
+
+ /* Byte 0 is level count, not a descriptor */
+ for ( j = 1 ; j < 16 ; j++ ) {
+ unsigned char des = dp[j];
+ unsigned char k = 0;
+
+ /* look up this descriptor in the table */
+ while (cache_table[k].descriptor != 0)
+ {
+ if (cache_table[k].descriptor == des) {
+ switch (cache_table[k].cache_type) {
+ case LVL_1_INST:
+ l1i += cache_table[k].size;
+ break;
+ case LVL_1_DATA:
+ l1d += cache_table[k].size;
+ break;
+ case LVL_2:
+ l2 += cache_table[k].size;
+ break;
+ case LVL_3:
+ l3 += cache_table[k].size;
+ break;
+ case LVL_TRACE:
+ trace += cache_table[k].size;
+ break;
+ }
+
+ break;
+ }
+
+ k++;
+ }
+ }
+ }
+
+ if ( trace )
+ printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
+ else if ( l1i )
+ printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+ if ( l1d )
+ printk(", L1 D cache: %dK\n", l1d);
+ else
+ printk("\n");
+ if ( l2 )
+ printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+ if ( l3 )
+ printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+ /*
+ * This assumes the L3 cache is shared; it typically lives in
+ * the northbridge. The L1 caches are included by the L2
+ * cache, and so should not be included for the purpose of
+ * SMP switching weights.
+ */
+ c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+ }
+
+ return l2;
+}
diff --git a/xen/arch/x86/cpu/rise.c b/xen/arch/x86/cpu/rise.c
new file mode 100644
index 0000000000..3b1b0f4048
--- /dev/null
+++ b/xen/arch/x86/cpu/rise.c
@@ -0,0 +1,54 @@
+#include <xen/config.h>
+#include <xen/lib.h>
+#include <xen/init.h>
+#include <xen/bitops.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __init init_rise(struct cpuinfo_x86 *c)
+{
+ printk("CPU: Rise iDragon");
+ if (c->x86_model > 2)
+ printk(" II");
+ printk("\n");
+
+ /* Unhide possibly hidden capability flags
+ The mp6 iDragon family don't have MSRs.
+ We switch on extra features with this cpuid weirdness: */
+ __asm__ (
+ "movl $0x6363452a, %%eax\n\t"
+ "movl $0x3231206c, %%ecx\n\t"
+ "movl $0x2a32313a, %%edx\n\t"
+ "cpuid\n\t"
+ "movl $0x63634523, %%eax\n\t"
+ "movl $0x32315f6c, %%ecx\n\t"
+ "movl $0x2333313a, %%edx\n\t"
+ "cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
+ );
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+}
+
+static struct cpu_dev rise_cpu_dev __initdata = {
+ .c_vendor = "Rise",
+ .c_ident = { "RiseRiseRise" },
+ .c_models = {
+ { .vendor = X86_VENDOR_RISE, .family = 5, .model_names =
+ {
+ [0] = "iDragon",
+ [2] = "iDragon",
+ [8] = "iDragon II",
+ [9] = "iDragon II"
+ }
+ },
+ },
+ .c_init = init_rise,
+};
+
+int __init rise_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_RISE] = &rise_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(rise_init_cpu);
diff --git a/xen/arch/x86/cpu/transmeta.c b/xen/arch/x86/cpu/transmeta.c
new file mode 100644
index 0000000000..c296006256
--- /dev/null
+++ b/xen/arch/x86/cpu/transmeta.c
@@ -0,0 +1,108 @@
+#include <xen/config.h>
+#include <xen/lib.h>
+#include <xen/init.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+static void __init init_transmeta(struct cpuinfo_x86 *c)
+{
+ unsigned int cap_mask, uk, max, dummy;
+ unsigned int cms_rev1, cms_rev2;
+ unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev;
+ char cpu_info[65];
+
+ get_model_name(c); /* Same as AMD/Cyrix */
+ display_cacheinfo(c);
+
+ /* Print CMS and CPU revision */
+ max = cpuid_eax(0x80860000);
+ cpu_rev = 0;
+ if ( max >= 0x80860001 ) {
+ cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
+ if (cpu_rev != 0x02000000) {
+ printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+ (cpu_rev >> 24) & 0xff,
+ (cpu_rev >> 16) & 0xff,
+ (cpu_rev >> 8) & 0xff,
+ cpu_rev & 0xff,
+ cpu_freq);
+ }
+ }
+ if ( max >= 0x80860002 ) {
+ cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
+ if (cpu_rev == 0x02000000) {
+ printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
+ new_cpu_rev, cpu_freq);
+ }
+ printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+ (cms_rev1 >> 24) & 0xff,
+ (cms_rev1 >> 16) & 0xff,
+ (cms_rev1 >> 8) & 0xff,
+ cms_rev1 & 0xff,
+ cms_rev2);
+ }
+ if ( max >= 0x80860006 ) {
+ cpuid(0x80860003,
+ (void *)&cpu_info[0],
+ (void *)&cpu_info[4],
+ (void *)&cpu_info[8],
+ (void *)&cpu_info[12]);
+ cpuid(0x80860004,
+ (void *)&cpu_info[16],
+ (void *)&cpu_info[20],
+ (void *)&cpu_info[24],
+ (void *)&cpu_info[28]);
+ cpuid(0x80860005,
+ (void *)&cpu_info[32],
+ (void *)&cpu_info[36],
+ (void *)&cpu_info[40],
+ (void *)&cpu_info[44]);
+ cpuid(0x80860006,
+ (void *)&cpu_info[48],
+ (void *)&cpu_info[52],
+ (void *)&cpu_info[56],
+ (void *)&cpu_info[60]);
+ cpu_info[64] = '\0';
+ printk(KERN_INFO "CPU: %s\n", cpu_info);
+ }
+
+ /* Unhide possibly hidden capability flags */
+ rdmsr(0x80860004, cap_mask, uk);
+ wrmsr(0x80860004, ~0, uk);
+ c->x86_capability[0] = cpuid_edx(0x00000001);
+ wrmsr(0x80860004, cap_mask, uk);
+
+ /* If we can run i686 user-space code, call us an i686 */
+#define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
+ if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
+ c->x86 = 6;
+}
+
+static void transmeta_identify(struct cpuinfo_x86 * c)
+{
+ u32 xlvl;
+ generic_identify(c);
+
+ /* Transmeta-defined flags: level 0x80860001 */
+ xlvl = cpuid_eax(0x80860000);
+ if ( (xlvl & 0xffff0000) == 0x80860000 ) {
+ if ( xlvl >= 0x80860001 )
+ c->x86_capability[2] = cpuid_edx(0x80860001);
+ }
+}
+
+static struct cpu_dev transmeta_cpu_dev __initdata = {
+ .c_vendor = "Transmeta",
+ .c_ident = { "GenuineTMx86", "TransmetaCPU" },
+ .c_init = init_transmeta,
+ .c_identify = transmeta_identify,
+};
+
+int __init transmeta_init_cpu(void)
+{
+ cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
+ return 0;
+}
+
+//early_arch_initcall(transmeta_init_cpu);
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 0751594777..078d59d8fd 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -82,7 +82,8 @@ extern void init_IRQ(void);
extern void trap_init(void);
extern void time_init(void);
extern void ac_timer_init(void);
-extern void initialize_keytable();
+extern void initialize_keytable(void);
+extern void early_cpu_init(void);
extern unsigned long cpu0_stack[];
@@ -101,256 +102,6 @@ int acpi_disabled;
int logical_proc_id[NR_CPUS];
-/* Standard macro to see if a specific flag is changeable. */
-static inline int flag_is_changeable_p(unsigned long flag)
-{
- unsigned long f1, f2;
-
- asm("pushf\n\t"
- "pushf\n\t"
- "pop %0\n\t"
- "mov %0,%1\n\t"
- "xor %2,%0\n\t"
- "push %0\n\t"
- "popf\n\t"
- "pushf\n\t"
- "pop %0\n\t"
- "popf\n\t"
- : "=&r" (f1), "=&r" (f2)
- : "ir" (flag));
-
- return ((f1^f2) & flag) != 0;
-}
-
-/* Probe for the CPUID instruction */
-static int __init have_cpuid_p(void)
-{
- return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-void __init get_cpu_vendor(struct cpuinfo_x86 *c)
-{
- char *v = c->x86_vendor_id;
-
- if (!strcmp(v, "GenuineIntel"))
- c->x86_vendor = X86_VENDOR_INTEL;
- else if (!strcmp(v, "AuthenticAMD"))
- c->x86_vendor = X86_VENDOR_AMD;
- else if (!strcmp(v, "CyrixInstead"))
- c->x86_vendor = X86_VENDOR_CYRIX;
- else if (!strcmp(v, "UMC UMC UMC "))
- c->x86_vendor = X86_VENDOR_UMC;
- else if (!strcmp(v, "CentaurHauls"))
- c->x86_vendor = X86_VENDOR_CENTAUR;
- else if (!strcmp(v, "NexGenDriven"))
- c->x86_vendor = X86_VENDOR_NEXGEN;
- else if (!strcmp(v, "RiseRiseRise"))
- c->x86_vendor = X86_VENDOR_RISE;
- else if (!strcmp(v, "GenuineTMx86") ||
- !strcmp(v, "TransmetaCPU"))
- c->x86_vendor = X86_VENDOR_TRANSMETA;
- else
- c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-static void __init init_intel(struct cpuinfo_x86 *c)
-{
- /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it */
- if ( c->x86 == 6 && c->x86_model < 3 && c->x86_mask < 3 )
- clear_bit(X86_FEATURE_SEP, &c->x86_capability);
-
- if ( test_bit(X86_FEATURE_HT, &c->x86_capability) )
- {
- u32 eax, ebx, ecx, edx;
- int initial_apic_id, siblings, cpu = smp_processor_id();
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
- ht_per_core = siblings = (ebx & 0xff0000) >> 16;
-
- if ( opt_noht )
- clear_bit(X86_FEATURE_HT, &c->x86_capability[0]);
-
- if ( siblings <= 1 )
- {
- printk(KERN_INFO "CPU#%d: Hyper-Threading is disabled\n", cpu);
- }
- else if ( siblings > 2 )
- {
- panic("We don't support more than two logical CPUs per package!");
- }
- else
- {
- initial_apic_id = ebx >> 24 & 0xff;
- phys_proc_id[cpu] = initial_apic_id >> 1;
- logical_proc_id[cpu] = initial_apic_id & 1;
- printk(KERN_INFO "CPU#%d: Physical ID: %d, Logical ID: %d\n",
- cpu, phys_proc_id[cpu], logical_proc_id[cpu]);
- }
- }
-
-#ifdef CONFIG_VMX
- start_vmx();
-#endif
-
-}
-
-static void __init init_amd(struct cpuinfo_x86 *c)
-{
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_bit(0*32+31, &c->x86_capability);
-
- switch(c->x86)
- {
- case 5:
- panic("AMD K6 is not supported.\n");
- case 6: /* An Athlon/Duron. We can trust the BIOS probably */
- break;
- }
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __init identify_cpu(struct cpuinfo_x86 *c)
-{
- int i, cpu = smp_processor_id();
- u32 xlvl, tfms, junk;
-
- phys_proc_id[cpu] = cpu;
- logical_proc_id[cpu] = 0;
-
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->cpuid_level = -1; /* CPUID not detected */
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
- c->x86_vendor_id[0] = '\0'; /* Unset */
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
- if ( !have_cpuid_p() )
- panic("Ancient processors not supported\n");
-
- /* Get vendor name */
- cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
- (unsigned int *)&c->x86_vendor_id[0],
- (unsigned int *)&c->x86_vendor_id[8],
- (unsigned int *)&c->x86_vendor_id[4]);
-
- get_cpu_vendor(c);
-
- if ( c->cpuid_level == 0 )
- panic("Decrepit CPUID not supported\n");
-
- cpuid(0x00000001, &tfms, &junk, &junk,
- &c->x86_capability[0]);
- c->x86 = (tfms >> 8) & 15;
- c->x86_model = (tfms >> 4) & 15;
- c->x86_mask = tfms & 15;
-
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- if ( (xlvl & 0xffff0000) == 0x80000000 ) {
- if ( xlvl >= 0x80000001 )
- c->x86_capability[1] = cpuid_edx(0x80000001);
- }
-
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ( (xlvl & 0xffff0000) == 0x80860000 ) {
- if ( xlvl >= 0x80860001 )
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-
- printk("CPU%d: Before vendor init, caps: %08x %08x %08x, vendor = %d\n",
- smp_processor_id(),
- c->x86_capability[0],
- c->x86_capability[1],
- c->x86_capability[2],
- c->x86_vendor);
-
- switch ( c->x86_vendor ) {
- case X86_VENDOR_INTEL:
- init_intel(c);
- break;
- case X86_VENDOR_AMD:
- init_amd(c);
- break;
- case X86_VENDOR_UNKNOWN: /* Connectix Virtual PC reports this */
- break;
- case X86_VENDOR_CENTAUR:
- break;
- default:
- printk("Unknown CPU identifier (%d): continuing anyway, "
- "but might fail.\n", c->x86_vendor);
- }
-
- printk("CPU caps: %08x %08x %08x %08x\n",
- c->x86_capability[0],
- c->x86_capability[1],
- c->x86_capability[2],
- c->x86_capability[3]);
-
- /*
- * On SMP, boot_cpu_data holds the common feature set between
- * all CPUs; so make sure that we indicate which features are
- * common between the CPUs. The first time this routine gets
- * executed, c == &boot_cpu_data.
- */
- if ( c != &boot_cpu_data ) {
- /* AND the already accumulated flags with these */
- for ( i = 0 ; i < NCAPINTS ; i++ )
- boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
- }
-}
-
-void __init print_cpu_info(struct cpuinfo_x86 *c)
-{
- printk("booted.\n");
-}
-
-unsigned long cpu_initialized;
-void __init cpu_init(void)
-{
- int nr = smp_processor_id();
- struct tss_struct *t = &init_tss[nr];
- char gdt_load[10];
-
- if ( test_and_set_bit(nr, &cpu_initialized) )
- panic("CPU#%d already initialized!!!\n", nr);
- printk("Initializing CPU#%d\n", nr);
-
- *(unsigned short *)(&gdt_load[0]) = LAST_RESERVED_GDT_BYTE;
- *(unsigned long *)(&gdt_load[2]) = GDT_VIRT_START(current);
- __asm__ __volatile__ ( "lgdt %0" : "=m" (gdt_load) );
-
- /* No nested task. */
- __asm__ __volatile__ ( "pushf ; andw $0xbfff,(%"__OP"sp) ; popf" );
-
- /* Ensure FPU gets initialised for each domain. */
- stts();
-
- /* Set up and load the per-CPU TSS and LDT. */
- t->bitmap = IOBMP_INVALID_OFFSET;
-#if defined(CONFIG_X86_32)
- t->ss0 = __HYPERVISOR_DS;
- t->esp0 = get_stack_bottom();
-#elif defined(CONFIG_X86_64)
- /* Bottom-of-stack must be 16-byte aligned or CPU will force it! :-o */
- BUG_ON((get_stack_bottom() & 15) != 0);
- t->rsp0 = get_stack_bottom();
-#endif
- set_tss_desc(nr,t);
- load_TR(nr);
- __asm__ __volatile__ ( "lldt %%ax" : : "a" (0) );
-
- /* Clear all 6 debug registers. */
-#define CD(register) __asm__ ( "mov %0,%%db" #register : : "r" (0UL) );
- CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-#undef CD
-
- /* Install correct page table. */
- write_ptbase(current);
-}
-
int acpi_force;
char acpi_param[10] = "";
static void parse_acpi_param(char *s)
@@ -415,6 +166,7 @@ static void __init start_of_day(void)
virt_to_phys(gdt_table) >> PAGE_SHIFT, 1, PAGE_HYPERVISOR);
/* Process CPU type information. */
+ early_cpu_init();
identify_cpu(&boot_cpu_data);
if ( cpu_has_fxsr )
set_in_cr4(X86_CR4_OSFXSR);
diff --git a/xen/include/asm-x86/config.h b/xen/include/asm-x86/config.h
index 5e4f6196ec..4f3925e894 100644
--- a/xen/include/asm-x86/config.h
+++ b/xen/include/asm-x86/config.h
@@ -7,11 +7,10 @@
#ifndef __X86_CONFIG_H__
#define __X86_CONFIG_H__
-#define CONFIG_VMX 1
-
#define CONFIG_X86 1
+#define CONFIG_X86_HT 1
#define CONFIG_SHADOW 1
-
+#define CONFIG_VMX 1
#define CONFIG_SMP 1
#define CONFIG_X86_LOCAL_APIC 1
#define CONFIG_X86_GOOD_APIC 1
diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
index 58aae2a74e..e695162de4 100644
--- a/xen/include/asm-x86/cpufeature.h
+++ b/xen/include/asm-x86/cpufeature.h
@@ -4,13 +4,12 @@
* Defines x86 CPU feature bits
*/
-#ifndef __ASM_X86_CPUFEATURE_H
-#define __ASM_X86_CPUFEATURE_H
+#ifndef __ASM_I386_CPUFEATURE_H
+#define __ASM_I386_CPUFEATURE_H
-/* Sample usage: CPU_FEATURE_P(cpu.x86_capability, FPU) */
-#define CPU_FEATURE_P(CAP, FEATURE) test_bit(CAP, X86_FEATURE_##FEATURE)
+#include <xen/bitops.h>
-#define NCAPINTS 6 /* Currently we have 6 32-bit words worth of info */
+#define NCAPINTS 7 /* N 32-bit words worth of info */
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
@@ -48,7 +47,7 @@
/* Don't duplicate feature flags which are redundant with Intel! */
#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */
#define X86_FEATURE_MP (1*32+19) /* MP Capable. */
-#define X86_FEATURE_NX (1*32+20) /* No-Execute Bit. */
+#define X86_FEATURE_NX (1*32+20) /* Execute Disable */
#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
@@ -72,13 +71,25 @@
#define X86_FEATURE_P4 (3*32+ 7) /* P4 */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
+#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
#define X86_FEATURE_VMXE (4*32+ 5) /* Virtual Machine Extensions */
#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_CID (4*32+10) /* Context ID */
+#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
+#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
+#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
+#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM (5*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY (5*32+ 1) /* If yes HyperThreading not valid */
#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability)
#define boot_cpu_has(bit) test_bit(bit, boot_cpu_data.x86_capability)
@@ -90,13 +101,14 @@
#define cpu_has_tsc boot_cpu_has(X86_FEATURE_TSC)
#define cpu_has_pae boot_cpu_has(X86_FEATURE_PAE)
#define cpu_has_pge boot_cpu_has(X86_FEATURE_PGE)
-#define cpu_has_sse2 boot_cpu_has(X86_FEATURE_XMM2)
#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC)
#define cpu_has_sep boot_cpu_has(X86_FEATURE_SEP)
#define cpu_has_mtrr boot_cpu_has(X86_FEATURE_MTRR)
#define cpu_has_mmx boot_cpu_has(X86_FEATURE_MMX)
#define cpu_has_fxsr boot_cpu_has(X86_FEATURE_FXSR)
#define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM)
+#define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2)
+#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
#define cpu_has_mp boot_cpu_has(X86_FEATURE_MP)
#define cpu_has_nx boot_cpu_has(X86_FEATURE_NX)
@@ -104,5 +116,15 @@
#define cpu_has_cyrix_arr boot_cpu_has(X86_FEATURE_CYRIX_ARR)
#define cpu_has_centaur_mcr boot_cpu_has(X86_FEATURE_CENTAUR_MCR)
#define cpu_has_xstore boot_cpu_has(X86_FEATURE_XSTORE)
+#define cpu_has_xstore_enabled boot_cpu_has(X86_FEATURE_XSTORE_EN)
+#define cpu_has_xcrypt boot_cpu_has(X86_FEATURE_XCRYPT)
+#define cpu_has_xcrypt_enabled boot_cpu_has(X86_FEATURE_XCRYPT_EN)
-#endif /* __ASM_X86_CPUFEATURE_H */
+#endif /* __ASM_I386_CPUFEATURE_H */
+
+/*
+ * Local Variables:
+ * mode:c
+ * comment-column:42
+ * End:
+ */
diff --git a/xen/include/asm-x86/msr.h b/xen/include/asm-x86/msr.h
index e576613c13..35163029e5 100644
--- a/xen/include/asm-x86/msr.h
+++ b/xen/include/asm-x86/msr.h
@@ -79,6 +79,17 @@
#define MSR_IA32_PLATFORM_ID 0x17
#define MSR_IA32_EBL_CR_POWERON 0x2a
+#define MSR_IA32_APICBASE 0x1b
+#define MSR_IA32_APICBASE_BSP (1<<8)
+#define MSR_IA32_APICBASE_ENABLE (1<<11)
+#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
+
+#define MSR_IA32_UCODE_WRITE 0x79
+#define MSR_IA32_UCODE_REV 0x8b
+
+#define MSR_P6_PERFCTR0 0xc1
+#define MSR_P6_PERFCTR1 0xc2
+
/* MSRs & bits used for VMX enabling */
#define MSR_IA32_VMX_BASIC_MSR 0x480
#define IA32_FEATURE_CONTROL_MSR 0x3a
@@ -108,9 +119,6 @@
/* Intel MSRs. Some also available on other CPUs */
#define MSR_IA32_PLATFORM_ID 0x17
-#define MSR_IA32_PERFCTR0 0xc1
-#define MSR_IA32_PERFCTR1 0xc2
-
#define MSR_MTRRcap 0x0fe
#define MSR_IA32_BBL_CR_CTL 0x119
@@ -122,9 +130,6 @@
#define MSR_IA32_MCG_STATUS 0x17a
#define MSR_IA32_MCG_CTL 0x17b
-#define MSR_IA32_EVNTSEL0 0x186
-#define MSR_IA32_EVNTSEL1 0x187
-
#define MSR_MTRRfix64K_00000 0x250
#define MSR_MTRRfix16K_80000 0x258
#define MSR_MTRRfix16K_A0000 0x259
@@ -145,14 +150,6 @@
#define MSR_IA32_DS_AREA 0x600
-#define MSR_IA32_APICBASE 0x1b
-#define MSR_IA32_APICBASE_BSP (1<<8)
-#define MSR_IA32_APICBASE_ENABLE (1<<11)
-#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
-
-#define MSR_IA32_UCODE_WRITE 0x79
-#define MSR_IA32_UCODE_REV 0x8b
-
#define MSR_IA32_BBL_CR_CTL 0x119
#define MSR_IA32_MCG_CAP 0x179
@@ -237,6 +234,7 @@
/* VIA Cyrix defined MSRs*/
#define MSR_VIA_FCR 0x1107
#define MSR_VIA_LONGHAUL 0x110a
+#define MSR_VIA_RNG 0x110b
#define MSR_VIA_BCR2 0x1147
/* Transmeta defined MSRs */
diff --git a/xen/include/asm-x86/processor.h b/xen/include/asm-x86/processor.h
index 94b82d4ba3..6fc44ade5d 100644
--- a/xen/include/asm-x86/processor.h
+++ b/xen/include/asm-x86/processor.h
@@ -26,8 +26,7 @@
#define X86_VENDOR_RISE 6
#define X86_VENDOR_TRANSMETA 7
#define X86_VENDOR_NSC 8
-#define X86_VENDOR_SIS 9
-#define X86_VENDOR_NUM 10
+#define X86_VENDOR_NUM 9
#define X86_VENDOR_UNKNOWN 0xff
/*
@@ -146,23 +145,26 @@ struct exec_domain;
({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
#endif
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
struct cpuinfo_x86 {
- __u8 x86; /* CPU family */
- __u8 x86_vendor; /* CPU vendor */
- __u8 x86_model;
- __u8 x86_mask;
- int cpuid_level; /* Maximum supported CPUID level, -1=no CPUID */
- __u32 x86_capability[NCAPINTS];
- char x86_vendor_id[16];
- int x86_cache_size; /* in KB - for CPUS that support this call */
- int x86_clflush_size;
- int x86_tlbsize; /* number of 4K pages in DTLB/ITLB combined */
+ __u8 x86; /* CPU family */
+ __u8 x86_vendor; /* CPU vendor */
+ __u8 x86_model;
+ __u8 x86_mask;
+ char wp_works_ok; /* It doesn't on 386's */
+ char hlt_works_ok; /* Problems on some 486Dx4's and old 386's */
+ char hard_math;
+ char rfu;
+ int cpuid_level; /* Maximum supported CPUID level, -1=no CPUID */
+ unsigned long x86_capability[NCAPINTS];
+ char x86_vendor_id[16];
+ char x86_model_id[64];
+ int x86_cache_size; /* in KB - valid for CPUS which support this
+ call */
+ int x86_cache_alignment; /* In bytes */
+ int fdiv_bug;
+ int f00f_bug;
+ int coma_bug;
+ unsigned char x86_num_cores;
} __cacheline_aligned;
/*
@@ -179,15 +181,23 @@ extern struct cpuinfo_x86 cpu_data[];
#define current_cpu_data boot_cpu_data
#endif
-extern int phys_proc_id[NR_CPUS];
-extern char ignore_irq13;
+extern int phys_proc_id[NR_CPUS];
extern void identify_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern void dodgy_tsc(void);
+#ifdef CONFIG_X86_HT
+extern void detect_ht(struct cpuinfo_x86 *c);
+#else
+static inline void detect_ht(struct cpuinfo_x86 *c) {}
+#endif
+
/*
* Generic CPUID function
+ * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
+ * resulting in stale register contents being returned.
*/
static inline void cpuid(
int op, unsigned int *eax, unsigned int *ebx,
@@ -195,10 +205,10 @@ static inline void cpuid(
{
__asm__("cpuid"
: "=a" (*eax),
- "=b" (*ebx),
- "=c" (*ecx),
- "=d" (*edx)
- : "0" (op));
+ "=b" (*ebx),
+ "=c" (*ecx),
+ "=d" (*edx)
+ : "0" (op), "2" (0));
}
/*
@@ -327,6 +337,23 @@ static inline void clear_in_cr4 (unsigned long mask)
outb((data), 0x23); \
} while (0)
+static inline void __monitor(const void *eax, unsigned long ecx,
+ unsigned long edx)
+{
+ /* "monitor %eax,%ecx,%edx;" */
+ asm volatile(
+ ".byte 0x0f,0x01,0xc8;"
+ : :"a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+ /* "mwait %eax,%ecx;" */
+ asm volatile(
+ ".byte 0x0f,0x01,0xc9;"
+ : :"a" (eax), "c" (ecx));
+}
+
#define IOBMP_BYTES 8192
#define IOBMP_INVALID_OFFSET 0x8000
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 03:26:57 +0000