bitkeeper revision 1.1555 (4294b5f0B3iu-SnB9loIMnLXO0loTA)

Ported genapic to Xen: support for bigsmp and numa platforms such as
es7000.
Signed-off-by: Keir Fraser <keir@xensource.com>

12 files changed, 1 insertions, 510 deletions

diff --git a/xen/include/asm-x86/mach-default/apm.h b/xen/include/asm-x86/mach-default/apm.h
deleted file mode 100644
index 1f730b8bd1..0000000000
--- a/xen/include/asm-x86/mach-default/apm.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  include/asm-i386/mach-default/apm.h
- *
- *  Machine specific APM BIOS functions for generic.
- *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-
-#ifndef _ASM_APM_H
-#define _ASM_APM_H
-
-#ifdef APM_ZERO_SEGS
-#	define APM_DO_ZERO_SEGS \
-		"pushl %%ds\n\t" \
-		"pushl %%es\n\t" \
-		"xorl %%edx, %%edx\n\t" \
-		"mov %%dx, %%ds\n\t" \
-		"mov %%dx, %%es\n\t" \
-		"mov %%dx, %%fs\n\t" \
-		"mov %%dx, %%gs\n\t"
-#	define APM_DO_POP_SEGS \
-		"popl %%es\n\t" \
-		"popl %%ds\n\t"
-#else
-#	define APM_DO_ZERO_SEGS
-#	define APM_DO_POP_SEGS
-#endif
-
-static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
-					u32 *eax, u32 *ebx, u32 *ecx,
-					u32 *edx, u32 *esi)
-{
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%al\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
-		  "=S" (*esi)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-}
-
-static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
-						u32 ecx_in, u32 *eax)
-{
-	int	cx, dx, si;
-	u8	error;
-
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%bl\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
-		  "=S" (si)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-	return error;
-}
-
-#endif /* _ASM_APM_H */
diff --git a/xen/include/asm-x86/mach-default/do_timer.h b/xen/include/asm-x86/mach-default/do_timer.h
deleted file mode 100644
index 03dd13a48a..0000000000
--- a/xen/include/asm-x86/mach-default/do_timer.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* defines for inline arch setup functions */
-
-#include <asm/apic.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- * @regs:	standard registers from interrupt
- *
- * Description:
- *	This hook is called immediately after the timer interrupt is ack'd.
- *	It's primary purpose is to allow architectures that don't possess
- *	individual per CPU clocks (like the CPU APICs supply) to broadcast the
- *	timer interrupt as a means of triggering reschedules etc.
- **/
-
-static inline void do_timer_interrupt_hook(struct pt_regs *regs)
-{
-	do_timer(regs);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-/*
- * In the SMP case we use the local APIC timer interrupt to do the
- * profiling, except when we simulate SMP mode on a uniprocessor
- * system, in that case we have to call the local interrupt handler.
- */
-#ifndef CONFIG_X86_LOCAL_APIC
-	profile_tick(CPU_PROFILING, regs);
-#else
-	if (!using_apic_timer)
-		smp_local_timer_interrupt(regs);
-#endif
-}
-
-
-/* you can safely undefine this if you don't have the Neptune chipset */
-
-#define BUGGY_NEPTUN_TIMER
-
-/**
- * do_timer_overflow - process a detected timer overflow condition
- * @count:	hardware timer interrupt count on overflow
- *
- * Description:
- *	This call is invoked when the jiffies count has not incremented but
- *	the hardware timer interrupt has.  It means that a timer tick interrupt
- *	came along while the previous one was pending, thus a tick was missed
- **/
-static inline int do_timer_overflow(int count)
-{
-	int i;
-
-	spin_lock(&i8259A_lock);
-	/*
-	 * This is tricky when I/O APICs are used;
-	 * see do_timer_interrupt().
-	 */
-	i = inb(0x20);
-	spin_unlock(&i8259A_lock);
-	
-	/* assumption about timer being IRQ0 */
-	if (i & 0x01) {
-		/*
-		 * We cannot detect lost timer interrupts ... 
-		 * well, that's why we call them lost, don't we? :)
-		 * [hmm, on the Pentium and Alpha we can ... sort of]
-		 */
-		count -= LATCH;
-	} else {
-#ifdef BUGGY_NEPTUN_TIMER
-		/*
-		 * for the Neptun bug we know that the 'latch'
-		 * command doesn't latch the high and low value
-		 * of the counter atomically. Thus we have to 
-		 * substract 256 from the counter 
-		 * ... funny, isnt it? :)
-		 */
-		
-		count -= 256;
-#else
-		printk("do_slow_gettimeoffset(): hardware timer problem?\n");
-#endif
-	}
-	return count;
-}
diff --git a/xen/include/asm-x86/mach-default/entry_arch.h b/xen/include/asm-x86/mach-default/entry_arch.h
deleted file mode 100644
index bc861469bd..0000000000
--- a/xen/include/asm-x86/mach-default/entry_arch.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is designed to contain the BUILD_INTERRUPT specifications for
- * all of the extra named interrupt vectors used by the architecture.
- * Usually this is the Inter Process Interrupts (IPIs)
- */
-
-/*
- * The following vectors are part of the Linux architecture, there
- * is no hardware IRQ pin equivalent for them, they are triggered
- * through the ICC by us (IPIs)
- */
-#ifdef CONFIG_X86_SMP
-BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
-BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
-#endif
-
-/*
- * every pentium local APIC has two 'local interrupts', with a
- * soft-definable vector attached to both interrupts, one of
- * which is a timer interrupt, the other one is error counter
- * overflow. Linux uses the local APIC timer interrupt to get
- * a much simpler SMP time architecture:
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
-BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
-BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
-#endif
-
-#endif
diff --git a/xen/include/asm-x86/mach-default/irq_vectors_limits.h b/xen/include/asm-x86/mach-default/irq_vectors_limits.h
index b330026e6f..69297bc0dc 100644
--- a/xen/include/asm-x86/mach-default/irq_vectors_limits.h
+++ b/xen/include/asm-x86/mach-default/irq_vectors_limits.h
@@ -1,21 +1,7 @@
 #ifndef _ASM_IRQ_VECTORS_LIMITS_H
 #define _ASM_IRQ_VECTORS_LIMITS_H
 
-#ifdef CONFIG_PCI_MSI
-#define NR_IRQS FIRST_SYSTEM_VECTOR
+#define NR_IRQS        224
 #define NR_IRQ_VECTORS NR_IRQS
-#else
-#ifdef CONFIG_X86_IO_APIC
-#define NR_IRQS 224
-# if (224 >= 32 * NR_CPUS)
-# define NR_IRQ_VECTORS NR_IRQS
-# else
-# define NR_IRQ_VECTORS (32 * NR_CPUS)
-# endif
-#else
-#define NR_IRQS 16
-#define NR_IRQ_VECTORS NR_IRQS
-#endif
-#endif
 
 #endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/xen/include/asm-x86/mach-default/mach_mpspec.h b/xen/include/asm-x86/mach-default/mach_mpspec.h
deleted file mode 100644
index 6b5dadcf1d..0000000000
--- a/xen/include/asm-x86/mach-default/mach_mpspec.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#define MAX_MP_BUSSES 32
-
-#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/xen/include/asm-x86/mach-default/mach_reboot.h b/xen/include/asm-x86/mach-default/mach_reboot.h
deleted file mode 100644
index 521e227db6..0000000000
--- a/xen/include/asm-x86/mach-default/mach_reboot.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/i386/mach-generic/mach_reboot.h
- *
- *  Machine specific reboot functions for generic.
- *  Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_REBOOT_H
-#define _MACH_REBOOT_H
-
-static inline void kb_wait(void)
-{
-	int i;
-
-	for (i = 0; i < 0x10000; i++)
-		if ((inb_p(0x64) & 0x02) == 0)
-			break;
-}
-
-static inline void mach_reboot(void)
-{
-	int i;
-	for (i = 0; i < 100; i++) {
-		kb_wait();
-		udelay(50);
-		outb(0xfe, 0x64);         /* pulse reset low */
-		udelay(50);
-	}
-}
-
-#endif /* !_MACH_REBOOT_H */
diff --git a/xen/include/asm-x86/mach-default/mach_time.h b/xen/include/asm-x86/mach-default/mach_time.h
deleted file mode 100644
index b749aa44a8..0000000000
--- a/xen/include/asm-x86/mach-default/mach_time.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- *  include/asm-i386/mach-default/mach_time.h
- *
- *  Machine specific set RTC function for generic.
- *  Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_TIME_H
-#define _MACH_TIME_H
-
-#include <linux/mc146818rtc.h>
-
-/* for check timing call set_rtc_mmss() 500ms     */
-/* used in arch/i386/time.c::do_timer_interrupt() */
-#define USEC_AFTER	500000
-#define USEC_BEFORE	500000
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-static inline int mach_set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-	return retval;
-}
-
-static inline unsigned long mach_get_cmos_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	int i;
-
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-	/* read RTC exactly on falling edge of update flag */
-	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
-		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
-			break;
-	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
-		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
-			break;
-	do { /* Isn't this overkill ? UIP above should guarantee consistency */
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-	  {
-	    BCD_TO_BIN(sec);
-	    BCD_TO_BIN(min);
-	    BCD_TO_BIN(hour);
-	    BCD_TO_BIN(day);
-	    BCD_TO_BIN(mon);
-	    BCD_TO_BIN(year);
-	  }
-	if ((year += 1900) < 1970)
-		year += 100;
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-#endif /* !_MACH_TIME_H */
diff --git a/xen/include/asm-x86/mach-default/mach_timer.h b/xen/include/asm-x86/mach-default/mach_timer.h
deleted file mode 100644
index 4b9703bb02..0000000000
--- a/xen/include/asm-x86/mach-default/mach_timer.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  include/asm-i386/mach-default/mach_timer.h
- *
- *  Machine specific calibrate_tsc() for generic.
- *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-/* ------ Calibrate the TSC ------- 
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-#ifndef _MACH_TIMER_H
-#define _MACH_TIMER_H
-
-#define CALIBRATE_LATCH	(5 * LATCH)
-
-static inline void mach_prepare_counter(void)
-{
-       /* Set the Gate high, disable speaker */
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	/*
-	 * Now let's take care of CTC channel 2
-	 *
-	 * Set the Gate high, program CTC channel 2 for mode 0,
-	 * (interrupt on terminal count mode), binary count,
-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
-	 *
-	 * Some devices need a delay here.
-	 */
-	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
-}
-
-static inline void mach_countup(unsigned long *count_p)
-{
-	unsigned long count = 0;
-	do {
-		count++;
-	} while ((inb_p(0x61) & 0x20) == 0);
-	*count_p = count;
-}
-
-#endif /* !_MACH_TIMER_H */
diff --git a/xen/include/asm-x86/mach-default/mach_traps.h b/xen/include/asm-x86/mach-default/mach_traps.h
deleted file mode 100644
index c98c2880c5..0000000000
--- a/xen/include/asm-x86/mach-default/mach_traps.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  include/asm-i386/mach-default/mach_traps.h
- *
- *  Machine specific NMI handling for generic.
- *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_TRAPS_H
-#define _MACH_TRAPS_H
-
-static inline void clear_mem_error(unsigned char reason)
-{
-	reason = (reason & 0xf) | 4;
-	outb(reason, 0x61);
-}
-
-static inline unsigned char get_nmi_reason(void)
-{
-	return inb(0x61);
-}
-
-static inline void reassert_nmi(void)
-{
-	outb(0x8f, 0x70);
-	inb(0x71);		/* dummy */
-	outb(0x0f, 0x70);
-	inb(0x71);		/* dummy */
-}
-
-#endif /* !_MACH_TRAPS_H */
diff --git a/xen/include/asm-x86/mach-default/pci-functions.h b/xen/include/asm-x86/mach-default/pci-functions.h
deleted file mode 100644
index ed0bab4273..0000000000
--- a/xen/include/asm-x86/mach-default/pci-functions.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *	PCI BIOS function numbering for conventional PCI BIOS 
- *	systems
- */
-
-#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
-#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
-#define PCIBIOS_FIND_PCI_DEVICE		0xb102
-#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
-#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
-#define PCIBIOS_READ_CONFIG_BYTE	0xb108
-#define PCIBIOS_READ_CONFIG_WORD	0xb109
-#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
-#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
-#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
-#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
-#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
-#define PCIBIOS_SET_PCI_HW_INT		0xb10f
-
diff --git a/xen/include/asm-x86/mach-default/setup_arch_post.h b/xen/include/asm-x86/mach-default/setup_arch_post.h
deleted file mode 100644
index 2fc4888721..0000000000
--- a/xen/include/asm-x86/mach-default/setup_arch_post.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/**
- * machine_specific_memory_setup - Hook for machine specific memory setup.
- *
- * Description:
- *	This is included late in kernel/setup.c so that it can make
- *	use of all of the static functions.
- **/
-
-static char * __init machine_specific_memory_setup(void)
-{
-	char *who;
-
-
-	who = "BIOS-e820";
-
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
-	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
-		unsigned long mem_size;
-
-		/* compare results from other methods and take the greater */
-		if (ALT_MEM_K < EXT_MEM_K) {
-			mem_size = EXT_MEM_K;
-			who = "BIOS-88";
-		} else {
-			mem_size = ALT_MEM_K;
-			who = "BIOS-e801";
-		}
-
-		e820.nr_map = 0;
-		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
-		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
-  	}
-	return who;
-}
diff --git a/xen/include/asm-x86/mach-default/setup_arch_pre.h b/xen/include/asm-x86/mach-default/setup_arch_pre.h
deleted file mode 100644
index fb42099e7b..0000000000
--- a/xen/include/asm-x86/mach-default/setup_arch_pre.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Hook to call BIOS initialisation function */
-
-/* no action for generic */
-
-#define ARCH_SETUP