Remove xend-config-xenapi.sxp and xm-config-xenapi.xml

The contents of these two files are duplicate of xend-config.sxp and
xm-config.xml. They only add maintaining burdens to developers.

This patch removes them permanently.

Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>

2 files changed, 0 insertions, 239 deletions

diff --git a/tools/examples/xend-config-xenapi.sxp b/tools/examples/xend-config-xenapi.sxp
deleted file mode 100644
index dc9517d7cd..0000000000
--- a/tools/examples/xend-config-xenapi.sxp
+++ /dev/null
@@ -1,196 +0,0 @@
-# -*- sh -*-
-
-#
-# Xend configuration file.
-#
-
-# This example configuration is appropriate for an installation that 
-# utilizes a bridged network configuration. Access to xend via http
-# is disabled.  
-
-# Commented out entries show the default for that entry, unless otherwise
-# specified.
-
-#(logfile /var/log/xen/xend.log)
-#(loglevel DEBUG)
-
-
-# The Xen-API server configuration.  (Please note that this server is
-# available as an UNSUPPORTED PREVIEW in Xen 3.0.4, and should not be relied
-# upon).
-#
-# This value configures the ports, interfaces, and access controls for the
-# Xen-API server.  Each entry in the list starts with either unix, a port
-# number, or an address:port pair.  If this is "unix", then a UDP socket is
-# opened, and this entry applies to that.  If it is a port, then Xend will
-# listen on all interfaces on that TCP port, and if it is an address:port
-# pair, then Xend will listen on the specified port, using the interface with
-# the specified address.
-#
-# The subsequent string configures the user-based access control for the
-# listener in question.  This can be one of "none" or "pam", indicating either
-# that users should be allowed access unconditionally, or that the local
-# Pluggable Authentication Modules configuration should be used.  If this
-# string is missing or empty, then "pam" is used.
-#
-# The final string gives the host-based access control for that listener. If
-# this is missing or empty, then all connections are accepted.  Otherwise,
-# this should be a space-separated sequence of regular expressions; any host
-# with a fully-qualified domain name or an IP address that matches one of
-# these regular expressions will be accepted.
-#
-# Example: listen on TCP port 9363 on all interfaces, accepting connections
-# only from machines in example.com or localhost, and allow access through
-# the unix domain socket unconditionally:
-#
-   (xen-api-server ((9363 none)))
-#                    (unix none)))
-#
-# Optionally, the TCP Xen-API server can use SSL by specifying the private
-# key and certificate location:
-#
-#                    (9367 pam '' /etc/xen/xen-api.key /etc/xen/xen-api.crt)
-#
-# Default:
-#   (xen-api-server ((unix)))
-
-
-#(xend-http-server no)
-#(xend-unix-server no)
-#(xend-tcp-xmlrpc-server no)
-#(xend-unix-xmlrpc-server yes)
-#(xend-relocation-server no)
-(xend-relocation-server yes)
-
-#(xend-unix-path /var/lib/xend/xend-socket)
-
-
-# Address and port xend should use for the legacy TCP XMLRPC interface, 
-# if xend-tcp-xmlrpc-server is set.
-#(xend-tcp-xmlrpc-server-address 'localhost')
-#(xend-tcp-xmlrpc-server-port 8006)
-
-# SSL key and certificate to use for the legacy TCP XMLRPC interface.
-# Setting these will mean that this port serves only SSL connections as
-# opposed to plaintext ones.
-#(xend-tcp-xmlrpc-server-ssl-key-file  /etc/xen/xmlrpc.key)
-#(xend-tcp-xmlrpc-server-ssl-cert-file /etc/xen/xmlrpc.crt)
-
-
-# Port xend should use for the HTTP interface, if xend-http-server is set.
-#(xend-port            8000)
-
-# Port xend should use for the relocation interface, if xend-relocation-server
-# is set.
-#(xend-relocation-port 8002)
-
-# Address xend should listen on for HTTP connections, if xend-http-server is
-# set.
-# Specifying 'localhost' prevents remote connections.
-# Specifying the empty string '' (the default) allows all connections.
-#(xend-address '')
-#(xend-address localhost)
-
-# Address xend should listen on for relocation-socket connections, if
-# xend-relocation-server is set.
-# Meaning and default as for xend-address above.
-#(xend-relocation-address '')
-
-# The hosts allowed to talk to the relocation port.  If this is empty (the
-# default), then all connections are allowed (assuming that the connection
-# arrives on a port and interface on which we are listening; see
-# xend-relocation-port and xend-relocation-address above).  Otherwise, this
-# should be a space-separated sequence of regular expressions.  Any host with
-# a fully-qualified domain name or an IP address that matches one of these
-# regular expressions will be accepted.
-#
-# For example:
-#  (xend-relocation-hosts-allow '^localhost$ ^.*\\.example\\.org$')
-#
-#(xend-relocation-hosts-allow '')
-(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
-
-# The limit (in kilobytes) on the size of the console buffer
-#(console-limit 1024)
-
-##
-# To bridge network traffic, like this:
-#
-# dom0: ----------------- bridge -> real eth0 -> the network
-#                            |
-# domU: fake eth0 -> vifN.0 -+
-#
-# use
-#
-# (network-script network-bridge)
-#
-# Your default ethernet device is used as the outgoing interface, by default. 
-# To use a different one (e.g. eth1) use
-#
-# (network-script 'network-bridge netdev=eth1')
-#
-# The bridge is named xenbr0, by default.  To rename the bridge, use
-#
-# (network-script 'network-bridge bridge=<name>')
-#
-# It is possible to use the network-bridge script in more complicated
-# scenarios, such as having two outgoing interfaces, with two bridges, and
-# two fake interfaces per guest domain.  To do things like this, write
-# yourself a wrapper script, and call network-bridge from it, as appropriate.
-#
-(network-script network-bridge)
-
-# The script used to control virtual interfaces.  This can be overridden on a
-# per-vif basis when creating a domain or a configuring a new vif.  The
-# vif-bridge script is designed for use with the network-bridge script, or
-# similar configurations.
-#
-# If you have overridden the bridge name using
-# (network-script 'network-bridge bridge=<name>') then you may wish to do the
-# same here.  The bridge name can also be set when creating a domain or
-# configuring a new vif, but a value specified here would act as a default.
-#
-# If you are using only one bridge, the vif-bridge script will discover that,
-# so there is no need to specify it explicitly.
-#
-(vif-script vif-bridge)
-
-
-## Use the following if network traffic is routed, as an alternative to the
-# settings for bridged networking given above.
-#(network-script network-route)
-#(vif-script     vif-route)
-
-
-## Use the following if network traffic is routed with NAT, as an alternative
-# to the settings for bridged networking given above.
-#(network-script network-nat)
-#(vif-script     vif-nat)
-
-# dom0-min-mem is the lowest permissible memory level (in MB) for dom0.
-# This is a minimum both for auto-ballooning (as enabled by
-# enable-dom0-ballooning below) and for xm mem-set when applied to dom0.
-(dom0-min-mem 196)
-
-# Whether to enable auto-ballooning of dom0 to allow domUs to be created.
-# If enable-dom0-ballooning = no, dom0 will never balloon out.
-(enable-dom0-ballooning yes)
-
-# In SMP system, dom0 will use dom0-cpus # of CPUS
-# If dom0-cpus = 0, dom0 will take all cpus available
-(dom0-cpus 0)
-
-# Whether to enable core-dumps when domains crash.
-#(enable-dump no)
-
-# The tool used for initiating virtual TPM migration
-#(external-migration-tool '')
-
-# The interface for VNC servers to listen on. Defaults
-# to 127.0.0.1  To restore old 'listen everywhere' behaviour
-# set this to 0.0.0.0
-#(vnc-listen '127.0.0.1')
-
-# The default password for VNC console on HVM domain.
-# Empty string is no authentication.
-(vncpasswd '')
diff --git a/tools/examples/xm-config-xenapi.xml b/tools/examples/xm-config-xenapi.xml
deleted file mode 100644
index dbd8778bae..0000000000
--- a/tools/examples/xm-config-xenapi.xml
+++ /dev/null
@@ -1,43 +0,0 @@
-<!--
-
-Copyright (C) 2006 XenSource Inc.
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of version 2.1 of the GNU Lesser General Public
-License as published by the Free Software Foundation.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Lesser General Public License for more details.
-
-You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
--->
-
-<!--
-
-This is a configuration file for xm; it should be placed in
-/etc/xen/xm-config.xml.  If this file is missing, then xm will fall back to
-the normal behaviour that's in Xen 3.0.4 and below.  The settings here are
-most useful for experimenting with the Xen-API preview in Xen 3.0.4.
-
--->
-
-<xm>
-  <!-- The server element describes how to talk to Xend.  The type may be 
-       Xen-API or LegacyXMLRPC (the default).  The URI is that of the
-       server; you might try http://server:9363/ or
-       httpu:///var/run/xend/xen-api.sock for the Xen-API, or
-       httpu:///var/run/xend/xmlrpc.sock for the legacy server.
-
-       The username and password attributes will be used to log in if Xen-API
-       is being used.
-    -->
-  <server type='Xen-API'
-          uri='http://localhost:9363/'
-          username='me'
-          password='mypassword' />
-</xm>