diff options
author | iap10@labyrinth.cl.cam.ac.uk <iap10@labyrinth.cl.cam.ac.uk> | 2003-02-24 16:55:07 +0000 |
---|---|---|
committer | iap10@labyrinth.cl.cam.ac.uk <iap10@labyrinth.cl.cam.ac.uk> | 2003-02-24 16:55:07 +0000 |
commit | a48212cb65e09669ed243581556529681cebba0a (patch) | |
tree | a58f47e4764f343db87eba48d17ce9b2ddbf8047 /old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c | |
parent | 96ce9e11d148a721557d48ed5a8ca7857a7bc937 (diff) | |
download | xen-a48212cb65e09669ed243581556529681cebba0a.tar.gz xen-a48212cb65e09669ed243581556529681cebba0a.tar.bz2 xen-a48212cb65e09669ed243581556529681cebba0a.zip |
bitkeeper revision 1.93 (3e5a4e6bkPheUp3x1uufN2MS3LAB7A)
Latest and Greatest version of XenoLinux based on the Linux-2.4.21-pre4
kernel.
Diffstat (limited to 'old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c')
-rw-r--r-- | old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c | 1129 |
1 files changed, 1129 insertions, 0 deletions
diff --git a/old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c b/old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c new file mode 100644 index 0000000000..7c855904ae --- /dev/null +++ b/old/xenolinux-2.4.16-sparse/arch/xeno/kernel/irq.c @@ -0,0 +1,1129 @@ +/* + * linux/arch/i386/kernel/irq.c + * + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * This file contains the code used by various IRQ handling routines: + * asking for different IRQ's should be done through these routines + * instead of just grabbing them. Thus setups with different IRQ numbers + * shouldn't result in any weird surprises, and installing new handlers + * should be easier. + */ + +/* + * (mostly architecture independent, will move to kernel/irq.c in 2.5.) + * + * IRQs are in fact implemented a bit like signal handlers for the kernel. + * Naturally it's not a 1:1 relation, but there are similarities. + */ + +#include <linux/config.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/smp_lock.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/irq.h> +#include <linux/proc_fs.h> +#include <linux/kdb.h> + +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/system.h> +#include <asm/bitops.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/irq.h> + + + +/* + * Linux has a controller-independent x86 interrupt architecture. + * every controller has a 'controller-template', that is used + * by the main code to do the right thing. Each driver-visible + * interrupt source is transparently wired to the apropriate + * controller. Thus drivers need not be aware of the + * interrupt-controller. + * + * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC, + * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC. + * (IO-APICs assumed to be messaging to Pentium local-APICs) + * + * the code is designed to be easily extended with new/different + * interrupt controllers, without having to do assembly magic. + */ + +/* + * Controller mappings for all interrupt sources: + */ +irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = + { [0 ... NR_IRQS-1] = { 0, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}}; + +static void register_irq_proc (unsigned int irq); + +/* + * Special irq handlers. + */ + +void no_action(int cpl, void *dev_id, struct pt_regs *regs) { } + +/* + * Generic no controller code + */ + +static void enable_none(unsigned int irq) { } +static unsigned int startup_none(unsigned int irq) { return 0; } +static void disable_none(unsigned int irq) { } +static void ack_none(unsigned int irq) +{ + printk("unexpected IRQ trap at vector %02x\n", irq); +} + +/* startup is the same as "enable", shutdown is same as "disable" */ +#define shutdown_none disable_none +#define end_none enable_none + +struct hw_interrupt_type no_irq_type = { + "none", + startup_none, + shutdown_none, + enable_none, + disable_none, + ack_none, + end_none +}; + +atomic_t irq_err_count; +#ifdef CONFIG_X86_IO_APIC +#ifdef APIC_MISMATCH_DEBUG +atomic_t irq_mis_count; +#endif +#endif + +/* + * Generic, controller-independent functions: + */ + +int get_irq_list(char *buf) +{ + int i, j; + struct irqaction * action; + char *p = buf; + + p += sprintf(p, " "); + for (j=0; j<smp_num_cpus; j++) + p += sprintf(p, "CPU%d ",j); + *p++ = '\n'; + + for (i = 0 ; i < NR_IRQS ; i++) { + action = irq_desc[i].action; + if (!action) + continue; + p += sprintf(p, "%3d: ",i); +#ifndef CONFIG_SMP + p += sprintf(p, "%10u ", kstat_irqs(i)); +#else + for (j = 0; j < smp_num_cpus; j++) + p += sprintf(p, "%10u ", + kstat.irqs[cpu_logical_map(j)][i]); +#endif + p += sprintf(p, " %14s", irq_desc[i].handler->typename); + p += sprintf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + p += sprintf(p, ", %s", action->name); + *p++ = '\n'; + } + p += sprintf(p, "NMI: "); + for (j = 0; j < smp_num_cpus; j++) + p += sprintf(p, "%10u ", + nmi_count(cpu_logical_map(j))); + p += sprintf(p, "\n"); +#if CONFIG_X86_LOCAL_APIC + p += sprintf(p, "LOC: "); + for (j = 0; j < smp_num_cpus; j++) + p += sprintf(p, "%10u ", + apic_timer_irqs[cpu_logical_map(j)]); + p += sprintf(p, "\n"); +#endif + p += sprintf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); +#ifdef CONFIG_X86_IO_APIC +#ifdef APIC_MISMATCH_DEBUG + p += sprintf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); +#endif +#endif + return p - buf; +} + + +/* + * Global interrupt locks for SMP. Allow interrupts to come in on any + * CPU, yet make cli/sti act globally to protect critical regions.. + */ + +#ifdef CONFIG_SMP +unsigned char global_irq_holder = NO_PROC_ID; +unsigned volatile long global_irq_lock; /* pendantic: long for set_bit --RR */ + +extern void show_stack(unsigned long* esp); + +static void show(char * str) +{ + int i; + int cpu = smp_processor_id(); + + printk("\n%s, CPU %d:\n", str, cpu); + printk("irq: %d [",irqs_running()); + for(i=0;i < smp_num_cpus;i++) + printk(" %d",local_irq_count(i)); + printk(" ]\nbh: %d [",spin_is_locked(&global_bh_lock) ? 1 : 0); + for(i=0;i < smp_num_cpus;i++) + printk(" %d",local_bh_count(i)); + + printk(" ]\nStack dumps:"); + for(i = 0; i < smp_num_cpus; i++) { + unsigned long esp; + if (i == cpu) + continue; + printk("\nCPU %d:",i); + esp = init_tss[i].esp0; + if (!esp) { + /* tss->esp0 is set to NULL in cpu_init(), + * it's initialized when the cpu returns to user + * space. -- manfreds + */ + printk(" <unknown> "); + continue; + } + esp &= ~(THREAD_SIZE-1); + esp += sizeof(struct task_struct); + show_stack((void*)esp); + } + printk("\nCPU %d:",cpu); + show_stack(NULL); + printk("\n"); +} + +#define MAXCOUNT 100000000 + +/* + * I had a lockup scenario where a tight loop doing + * spin_unlock()/spin_lock() on CPU#1 was racing with + * spin_lock() on CPU#0. CPU#0 should have noticed spin_unlock(), but + * apparently the spin_unlock() information did not make it + * through to CPU#0 ... nasty, is this by design, do we have to limit + * 'memory update oscillation frequency' artificially like here? + * + * Such 'high frequency update' races can be avoided by careful design, but + * some of our major constructs like spinlocks use similar techniques, + * it would be nice to clarify this issue. Set this define to 0 if you + * want to check whether your system freezes. I suspect the delay done + * by SYNC_OTHER_CORES() is in correlation with 'snooping latency', but + * i thought that such things are guaranteed by design, since we use + * the 'LOCK' prefix. + */ +#define SUSPECTED_CPU_OR_CHIPSET_BUG_WORKAROUND 0 + +#if SUSPECTED_CPU_OR_CHIPSET_BUG_WORKAROUND +# define SYNC_OTHER_CORES(x) udelay(x+1) +#else +/* + * We have to allow irqs to arrive between __sti and __cli + */ +# define SYNC_OTHER_CORES(x) __asm__ __volatile__ ("nop") +#endif + +static inline void wait_on_irq(int cpu) +{ + int count = MAXCOUNT; + + for (;;) { + + /* + * Wait until all interrupts are gone. Wait + * for bottom half handlers unless we're + * already executing in one.. + */ + if (!irqs_running()) + if (local_bh_count(cpu) || !spin_is_locked(&global_bh_lock)) + break; + + /* Duh, we have to loop. Release the lock to avoid deadlocks */ + clear_bit(0,&global_irq_lock); + + for (;;) { + if (!--count) { + show("wait_on_irq"); + count = ~0; + } + __sti(); + SYNC_OTHER_CORES(cpu); + __cli(); + if (irqs_running()) + continue; + if (global_irq_lock) + continue; + if (!local_bh_count(cpu) && spin_is_locked(&global_bh_lock)) + continue; + if (!test_and_set_bit(0,&global_irq_lock)) + break; + } + } +} + +/* + * This is called when we want to synchronize with + * interrupts. We may for example tell a device to + * stop sending interrupts: but to make sure there + * are no interrupts that are executing on another + * CPU we need to call this function. + */ +void synchronize_irq(void) +{ + if (irqs_running()) { + /* Stupid approach */ + cli(); + sti(); + } +} + +static inline void get_irqlock(int cpu) +{ +#ifdef CONFIG_KDB + static int kdb_rate; + if (KDB_IS_RUNNING() && kdb_rate++ < 10) + kdb_printf("Warning: get_irqlock on cpu %d while kdb is running, may hang\n", smp_processor_id()); +#endif /* CONFIG_KDB */ + if (test_and_set_bit(0,&global_irq_lock)) { + /* do we already hold the lock? */ + if ((unsigned char) cpu == global_irq_holder) + return; + /* Uhhuh.. Somebody else got it. Wait.. */ + do { + do { + rep_nop(); + } while (test_bit(0,&global_irq_lock)); + } while (test_and_set_bit(0,&global_irq_lock)); + } + /* + * We also to make sure that nobody else is running + * in an interrupt context. + */ + wait_on_irq(cpu); + + /* + * Ok, finally.. + */ + global_irq_holder = cpu; +} + +void __global_cli(void) +{ + panic("__global_cli"); +} + +void __global_sti(void) +{ + panic("__global_sti"); +} + +/* + * SMP flags value to restore to: + * 0 - global cli + * 1 - global sti + * 2 - local cli + * 3 - local sti + */ +unsigned long __global_save_flags(void) +{ + panic("__global_save_flags"); +} + +void __global_restore_flags(unsigned long flags) +{ + panic("__global_restore_flags"); +} + +#endif + +/* + * This should really return information about whether + * we should do bottom half handling etc. Right now we + * end up _always_ checking the bottom half, which is a + * waste of time and is not what some drivers would + * prefer. + */ +int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action) +{ + int status; + int cpu = smp_processor_id(); + + irq_enter(cpu, irq); + + status = 1; /* Force the "do bottom halves" bit */ + + if (!(action->flags & SA_INTERRUPT)) + __sti(); + + do { + status |= action->flags; + action->handler(irq, action->dev_id, regs); + action = action->next; + } while (action); + if (status & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + __cli(); + + irq_exit(cpu, irq); + + return status; +} + +/* + * Generic enable/disable code: this just calls + * down into the PIC-specific version for the actual + * hardware disable after having gotten the irq + * controller lock. + */ + +/** + * disable_irq_nosync - disable an irq without waiting + * @irq: Interrupt to disable + * + * Disable the selected interrupt line. Disables and Enables are + * nested. + * Unlike disable_irq(), this function does not ensure existing + * instances of the IRQ handler have completed before returning. + * + * This function may be called from IRQ context. + */ + +inline void disable_irq_nosync(unsigned int irq) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->depth++) { + desc->status |= IRQ_DISABLED; + desc->handler->disable(irq); + } + spin_unlock_irqrestore(&desc->lock, flags); +} + +/** + * disable_irq - disable an irq and wait for completion + * @irq: Interrupt to disable + * + * Disable the selected interrupt line. Enables and Disables are + * nested. + * This function waits for any pending IRQ handlers for this interrupt + * to complete before returning. If you use this function while + * holding a resource the IRQ handler may need you will deadlock. + * + * This function may be called - with care - from IRQ context. + */ + +void disable_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + + if (!local_irq_count(smp_processor_id())) { + do { + barrier(); + cpu_relax(); + } while (irq_desc[irq].status & IRQ_INPROGRESS); + } +} + +/** + * enable_irq - enable handling of an irq + * @irq: Interrupt to enable + * + * Undoes the effect of one call to disable_irq(). If this + * matches the last disable, processing of interrupts on this + * IRQ line is re-enabled. + * + * This function may be called from IRQ context. + */ + +void enable_irq(unsigned int irq) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + switch (desc->depth) { + case 1: { + unsigned int status = desc->status & ~IRQ_DISABLED; + desc->status = status; + if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { + desc->status = status | IRQ_REPLAY; + hw_resend_irq(desc->handler,irq); + } + desc->handler->enable(irq); + /* fall-through */ + } + default: + desc->depth--; + break; + case 0: + printk("enable_irq(%u) unbalanced from %p\n", irq, + __builtin_return_address(0)); + } + spin_unlock_irqrestore(&desc->lock, flags); +} + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs) +{ + /* + * We ack quickly, we don't want the irq controller + * thinking we're snobs just because some other CPU has + * disabled global interrupts (we have already done the + * INT_ACK cycles, it's too late to try to pretend to the + * controller that we aren't taking the interrupt). + * + * 0 return value means that this irq is already being + * handled by some other CPU. (or is disabled) + */ + int cpu = smp_processor_id(); + irq_desc_t *desc = irq_desc + irq; + struct irqaction * action; + unsigned int status; + + kstat.irqs[cpu][irq]++; + spin_lock(&desc->lock); + desc->handler->ack(irq); + /* + REPLAY is when Linux resends an IRQ that was dropped earlier + WAITING is used by probe to mark irqs that are being tested + */ + status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); + status |= IRQ_PENDING; /* we _want_ to handle it */ + + /* + * If the IRQ is disabled for whatever reason, we cannot + * use the action we have. + */ + action = NULL; + if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + action = desc->action; + status &= ~IRQ_PENDING; /* we commit to handling */ + status |= IRQ_INPROGRESS; /* we are handling it */ + } + desc->status = status; + + /* + * If there is no IRQ handler or it was disabled, exit early. + Since we set PENDING, if another processor is handling + a different instance of this same irq, the other processor + will take care of it. + */ + if (!action) + goto out; + + /* + * Edge triggered interrupts need to remember + * pending events. + * This applies to any hw interrupts that allow a second + * instance of the same irq to arrive while we are in do_IRQ + * or in the handler. But the code here only handles the _second_ + * instance of the irq, not the third or fourth. So it is mostly + * useful for irq hardware that does not mask cleanly in an + * SMP environment. + */ + for (;;) { + spin_unlock(&desc->lock); + handle_IRQ_event(irq, regs, action); + spin_lock(&desc->lock); + + if (!(desc->status & IRQ_PENDING)) + break; + desc->status &= ~IRQ_PENDING; + } + desc->status &= ~IRQ_INPROGRESS; +out: + /* + * The ->end() handler has to deal with interrupts which got + * disabled while the handler was running. + */ + desc->handler->end(irq); + spin_unlock(&desc->lock); + + if (softirq_pending(cpu)) + do_softirq(); + + return 1; +} + +/** + * request_irq - allocate an interrupt line + * @irq: Interrupt line to allocate + * @handler: Function to be called when the IRQ occurs + * @irqflags: Interrupt type flags + * @devname: An ascii name for the claiming device + * @dev_id: A cookie passed back to the handler function + * + * This call allocates interrupt resources and enables the + * interrupt line and IRQ handling. From the point this + * call is made your handler function may be invoked. Since + * your handler function must clear any interrupt the board + * raises, you must take care both to initialise your hardware + * and to set up the interrupt handler in the right order. + * + * Dev_id must be globally unique. Normally the address of the + * device data structure is used as the cookie. Since the handler + * receives this value it makes sense to use it. + * + * If your interrupt is shared you must pass a non NULL dev_id + * as this is required when freeing the interrupt. + * + * Flags: + * + * SA_SHIRQ Interrupt is shared + * + * SA_INTERRUPT Disable local interrupts while processing + * + * SA_SAMPLE_RANDOM The interrupt can be used for entropy + * + */ + +int request_irq(unsigned int irq, + void (*handler)(int, void *, struct pt_regs *), + unsigned long irqflags, + const char * devname, + void *dev_id) +{ + int retval; + struct irqaction * action; + +#if 1 + /* + * Sanity-check: shared interrupts should REALLY pass in + * a real dev-ID, otherwise we'll have trouble later trying + * to figure out which interrupt is which (messes up the + * interrupt freeing logic etc). + */ + if (irqflags & SA_SHIRQ) { + if (!dev_id) + printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]); + } +#endif + + if (irq >= NR_IRQS) + return -EINVAL; + if (!handler) + return -EINVAL; + + action = (struct irqaction *) + kmalloc(sizeof(struct irqaction), GFP_KERNEL); + if (!action) + return -ENOMEM; + + action->handler = handler; + action->flags = irqflags; + action->mask = 0; + action->name = devname; + action->next = NULL; + action->dev_id = dev_id; + + retval = setup_irq(irq, action); + if (retval) + kfree(action); + return retval; +} + +/** + * free_irq - free an interrupt + * @irq: Interrupt line to free + * @dev_id: Device identity to free + * + * Remove an interrupt handler. The handler is removed and if the + * interrupt line is no longer in use by any driver it is disabled. + * On a shared IRQ the caller must ensure the interrupt is disabled + * on the card it drives before calling this function. The function + * does not return until any executing interrupts for this IRQ + * have completed. + * + * This function may be called from interrupt context. + * + * Bugs: Attempting to free an irq in a handler for the same irq hangs + * the machine. + */ + +void free_irq(unsigned int irq, void *dev_id) +{ + irq_desc_t *desc; + struct irqaction **p; + unsigned long flags; + + if (irq >= NR_IRQS) + return; + + desc = irq_desc + irq; + spin_lock_irqsave(&desc->lock,flags); + p = &desc->action; + for (;;) { + struct irqaction * action = *p; + if (action) { + struct irqaction **pp = p; + p = &action->next; + if (action->dev_id != dev_id) + continue; + + /* Found it - now remove it from the list of entries */ + *pp = action->next; + if (!desc->action) { + desc->status |= IRQ_DISABLED; + desc->handler->shutdown(irq); + } + spin_unlock_irqrestore(&desc->lock,flags); + +#ifdef CONFIG_SMP + /* Wait to make sure it's not being used on another CPU */ + while (desc->status & IRQ_INPROGRESS) { + barrier(); + cpu_relax(); + } +#endif + kfree(action); + return; + } + printk("Trying to free free IRQ%d\n",irq); + spin_unlock_irqrestore(&desc->lock,flags); + return; + } +} + +/* + * IRQ autodetection code.. + * + * This depends on the fact that any interrupt that + * comes in on to an unassigned handler will get stuck + * with "IRQ_WAITING" cleared and the interrupt + * disabled. + */ + +static DECLARE_MUTEX(probe_sem); + +/** + * probe_irq_on - begin an interrupt autodetect + * + * Commence probing for an interrupt. The interrupts are scanned + * and a mask of potential interrupt lines is returned. + * + */ + +unsigned long probe_irq_on(void) +{ + unsigned int i; + irq_desc_t *desc; + unsigned long val; + unsigned long delay; + + down(&probe_sem); + /* + * something may have generated an irq long ago and we want to + * flush such a longstanding irq before considering it as spurious. + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!irq_desc[i].action) + irq_desc[i].handler->startup(i); + spin_unlock_irq(&desc->lock); + } + + /* Wait for longstanding interrupts to trigger. */ + for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) + /* about 20ms delay */ synchronize_irq(); + + /* + * enable any unassigned irqs + * (we must startup again here because if a longstanding irq + * happened in the previous stage, it may have masked itself) + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!desc->action) { + desc->status |= IRQ_AUTODETECT | IRQ_WAITING; + if (desc->handler->startup(i)) + desc->status |= IRQ_PENDING; + } + spin_unlock_irq(&desc->lock); + } + + /* + * Wait for spurious interrupts to trigger + */ + for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) + /* about 100ms delay */ synchronize_irq(); + + /* + * Now filter out any obviously spurious interrupts + */ + val = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + /* It triggered already - consider it spurious. */ + if (!(status & IRQ_WAITING)) { + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } else + if (i < 32) + val |= 1 << i; + } + spin_unlock_irq(&desc->lock); + } + + return val; +} + +/* + * Return a mask of triggered interrupts (this + * can handle only legacy ISA interrupts). + */ + +/** + * probe_irq_mask - scan a bitmap of interrupt lines + * @val: mask of interrupts to consider + * + * Scan the ISA bus interrupt lines and return a bitmap of + * active interrupts. The interrupt probe logic state is then + * returned to its previous value. + * + * Note: we need to scan all the irq's even though we will + * only return ISA irq numbers - just so that we reset them + * all to a known state. + */ +unsigned int probe_irq_mask(unsigned long val) +{ + int i; + unsigned int mask; + + mask = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (i < 16 && !(status & IRQ_WAITING)) + mask |= 1 << i; + + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + return mask & val; +} + +/* + * Return the one interrupt that triggered (this can + * handle any interrupt source). + */ + +/** + * probe_irq_off - end an interrupt autodetect + * @val: mask of potential interrupts (unused) + * + * Scans the unused interrupt lines and returns the line which + * appears to have triggered the interrupt. If no interrupt was + * found then zero is returned. If more than one interrupt is + * found then minus the first candidate is returned to indicate + * their is doubt. + * + * The interrupt probe logic state is returned to its previous + * value. + * + * BUGS: When used in a module (which arguably shouldnt happen) + * nothing prevents two IRQ probe callers from overlapping. The + * results of this are non-optimal. + */ + +int probe_irq_off(unsigned long val) +{ + int i, irq_found, nr_irqs; + + nr_irqs = 0; + irq_found = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (!(status & IRQ_WAITING)) { + if (!nr_irqs) + irq_found = i; + nr_irqs++; + } + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + if (nr_irqs > 1) + irq_found = -irq_found; + return irq_found; +} + +/* this was setup_x86_irq but it seems pretty generic */ +int setup_irq(unsigned int irq, struct irqaction * new) +{ + int shared = 0; + unsigned long flags; + struct irqaction *old, **p; + irq_desc_t *desc = irq_desc + irq; + + /* + * Some drivers like serial.c use request_irq() heavily, + * so we have to be careful not to interfere with a + * running system. + */ + if (new->flags & SA_SAMPLE_RANDOM) { + /* + * This function might sleep, we want to call it first, + * outside of the atomic block. + * Yes, this might clear the entropy pool if the wrong + * driver is attempted to be loaded, without actually + * installing a new handler, but is this really a problem, + * only the sysadmin is able to do this. + */ + rand_initialize_irq(irq); + } + + /* + * The following block of code has to be executed atomically + */ + spin_lock_irqsave(&desc->lock,flags); + p = &desc->action; + if ((old = *p) != NULL) { + /* Can't share interrupts unless both agree to */ + if (!(old->flags & new->flags & SA_SHIRQ)) { + spin_unlock_irqrestore(&desc->lock,flags); + return -EBUSY; + } + + /* add new interrupt at end of irq queue */ + do { + p = &old->next; + old = *p; + } while (old); + shared = 1; + } + + *p = new; + + if (!shared) { + desc->depth = 0; + desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING); + desc->handler->startup(irq); + } + spin_unlock_irqrestore(&desc->lock,flags); + + register_irq_proc(irq); + return 0; +} + +static struct proc_dir_entry * root_irq_dir; +static struct proc_dir_entry * irq_dir [NR_IRQS]; + +#define HEX_DIGITS 8 + +static unsigned int parse_hex_value (const char *buffer, + unsigned long count, unsigned long *ret) +{ + unsigned char hexnum [HEX_DIGITS]; + unsigned long value; + int i; + + if (!count) + return -EINVAL; + if (count > HEX_DIGITS) + count = HEX_DIGITS; + if (copy_from_user(hexnum, buffer, count)) + return -EFAULT; + + /* + * Parse the first 8 characters as a hex string, any non-hex char + * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same. + */ + value = 0; + + for (i = 0; i < count; i++) { + unsigned int c = hexnum[i]; + + switch (c) { + case '0' ... '9': c -= '0'; break; + case 'a' ... 'f': c -= 'a'-10; break; + case 'A' ... 'F': c -= 'A'-10; break; + default: + goto out; + } + value = (value << 4) | c; + } +out: + *ret = value; + return 0; +} + +#if CONFIG_SMP + +static struct proc_dir_entry * smp_affinity_entry [NR_IRQS]; + +static unsigned long irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL }; +static int irq_affinity_read_proc (char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + if (count < HEX_DIGITS+1) + return -EINVAL; + return sprintf (page, "%08lx\n", irq_affinity[(long)data]); +} + +static int irq_affinity_write_proc (struct file *file, const char *buffer, + unsigned long count, void *data) +{ + int irq = (long) data, full_count = count, err; + unsigned long new_value; + + if (!irq_desc[irq].handler->set_affinity) + return -EIO; + + err = parse_hex_value(buffer, count, &new_value); + + /* + * Do not allow disabling IRQs completely - it's a too easy + * way to make the system unusable accidentally :-) At least + * one online CPU still has to be targeted. + */ + if (!(new_value & cpu_online_map)) + return -EINVAL; + + irq_affinity[irq] = new_value; + irq_desc[irq].handler->set_affinity(irq, new_value); + + return full_count; +} + +#endif + +static int prof_cpu_mask_read_proc (char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + unsigned long *mask = (unsigned long *) data; + if (count < HEX_DIGITS+1) + return -EINVAL; + return sprintf (page, "%08lx\n", *mask); +} + +static int prof_cpu_mask_write_proc (struct file *file, const char *buffer, + unsigned long count, void *data) +{ + unsigned long *mask = (unsigned long *) data, full_count = count, err; + unsigned long new_value; + + err = parse_hex_value(buffer, count, &new_value); + if (err) + return err; + + *mask = new_value; + return full_count; +} + +#define MAX_NAMELEN 10 + +static void register_irq_proc (unsigned int irq) +{ + char name [MAX_NAMELEN]; + + if (!root_irq_dir || (irq_desc[irq].handler == &no_irq_type) || + irq_dir[irq]) + return; + + memset(name, 0, MAX_NAMELEN); + sprintf(name, "%d", irq); + + /* create /proc/irq/1234 */ + irq_dir[irq] = proc_mkdir(name, root_irq_dir); + +#if CONFIG_SMP + { + struct proc_dir_entry *entry; + + /* create /proc/irq/1234/smp_affinity */ + entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]); + + if (entry) { + entry->nlink = 1; + entry->data = (void *)(long)irq; + entry->read_proc = irq_affinity_read_proc; + entry->write_proc = irq_affinity_write_proc; + } + + smp_affinity_entry[irq] = entry; + } +#endif +} + +unsigned long prof_cpu_mask = -1; + +void init_irq_proc (void) +{ + struct proc_dir_entry *entry; + int i; + + /* create /proc/irq */ + root_irq_dir = proc_mkdir("irq", 0); + + /* create /proc/irq/prof_cpu_mask */ + entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir); + + if (!entry) + return; + + entry->nlink = 1; + entry->data = (void *)&prof_cpu_mask; + entry->read_proc = prof_cpu_mask_read_proc; + entry->write_proc = prof_cpu_mask_write_proc; + + /* + * Create entries for all existing IRQs. + */ + for (i = 0; i < NR_IRQS; i++) + register_irq_proc(i); +} + |